How to reprogram an alligator alarm key fob

Configuring the functions of the key fobs for the Alligator alarm system with auto start, as for other models, should be done after the complete installation of all components of the security system, connecting the indicator lights and siren, as well as linking the communicator. Programming is carried out by successive pressing of the Valet service button and the button with the image of a closed lock.

Types and models of Alligator alarm key fobs

General characteristics of Alligator keychains:

• The battery in the main remote control is used at 1.5 volts, in the additional one - 3;
• the main key fobs have a button blocking function from accidental pressing;
• signal transmission frequency 433-868 MHz;
• car search;
• panic mode - siren and alarm signals are activated;
• option to call the car owner from the salon;
• Anti-Hijack - protection function against robbery;
• Valet mode to disable all security functions of the anti-theft system.

Table of models of Alligator security system control panels and their main characteristics

Why is the Alligator key fob not programmable?

The remote control for the Alligator alarm system broke down, and you decided to flash a new one. But I can't unlock the transmitter. Why can this happen with key fobs (TD 350, M2200, D 910, 975, S850RS, M 2200, S 875rs, S 200, M800, S400) and how to fix it?

1. Pager failure. Repair it yourself or replace it with a new one.
2. The “Ignition on” command is not detected by the control unit. Contact the specialists.
3. Jack mode was accidentally activated. Turn off and repeat the procedure for writing switches.
4. Damage to the control unit. Contact the service center.

How to determine the alarm model by key fob

The manufacturer's alarm model Alligator can be determined by the description of the appearance of its key fob:

1. TD-350/355. Remote controls in this series have a vertical screen orientation. The device is equipped with a non-removable antenna, which is part of the housing. The keychain is made in silver with black edging.
2. D-910. The communicator has a small screen, the area of ​​which does not exceed 1/3 of the front panel of the key fob. The device has a removable black plastic antenna and a body with round silver inserts.
3. S-800/825/850/875. The key fob features a horizontal screen orientation with a white backlight. The body is made of dark gray plastic and equipped with a built-in antenna. This security system, unlike others, has the function of auto-starting the engine based on voltage, so the display has a characteristic icon in the form of a lightning bolt.
4. TD-320. The device has a black body with a thin silver insert around the display and an enlarged eyelet for attaching to a keychain. The remote control screen has a vertical orientation and is distinguished by a large lock icon in the middle.

Photo gallery: Alligator security systems

Photos of alarms with feedback from the Alligator company.

Four buttons or more

Let’s immediately look at what key fobs with a display look like. In our instructions they are called pagers:

Remote controls with displays

Each pager, as we see, is equipped with 4 buttons or 5. This is true even for the S-700RS model.

Remote controls with four buttons

Actually, there are not many four-button remote controls in the Alligator brand’s arsenal:

Key rings with 4 keys

All of them are designed for two-way communication systems. The same remote controls are suitable for signaling devices of the SP family, although pagers differ for different models:

• The same pager design is suitable for SP-30 and SP-40 systems;
• The 75RS and 55RS alarms are equipped with a different pager that is not suitable for earlier models.

It’s a pity that such information is not written in the basic instructions.

All commands given both from the remote control and from the pager are received by the car security system without errors. But the communication range will vary in each case: for remote controls it can only be 20-30 m. These values, by the way, must be indicated separately in the instructions. Well, the maximum range is typical for a pager - it is equal to a kilometer.

How to find out if autorun is available

It is clear that only those systems that include a pager are equipped with two-way communication. We list them here:

1. S Family: 200, 250, 275, 300, 325, 400, 450, 475, 550, 575, 700RS, 725RS and 750RS, 800RS, 825RS, 850RS, 875RS, 975RS;
2. SP: 30, 40, 55RS, 75RS;
3. C: 200, 300, 500;
4. D: 810, 830, 910, 930, 950, 970, 975, 1100RSG;
5. TD: all models starting from 310;
6. M: any signal with a number greater than 1000.

Not all, but only some of the alarms that have been named are equipped with auto start. For example, in the “C” family, the 200th model does not have this option, but the rest do.

How can you immediately determine whether the signal system has auto start? There should be an icon on the display indicating that the engine is running. Most often this will be an image of smoke, and it is drawn from the bottom right. It turns out that you don’t even need instructions - everything looks so simple!

In conclusion, let's name one model that is an exception. We are talking about the LX-8000RS alarm system: you cannot equip it with a pager, but you can equip it with autostart. We provide a diagram as proof.

Installing the 8000RS Main Unit

Remote controls without a display are suitable for the 8000RS signaling system. But its remote controls, unlike most “one-way” devices, have an increased range. This is stated by the manufacturer.

Instructions for use and setting up the key fob

According to the instructions for use, before you begin setting up and using the communicator, you must:

1. Completely remove the original packaging from the device.
2. Open the back cover of the key fob by sliding it to the side and install the battery (type CR2032 - 2 pcs. or AAA - 1 pc.), observing the polarity.
3. Make sure that the control panel is in an area of ​​stable connection with the system. In this case, the icon on the communicator display indicating the connection quality must have at least 2 active bars.

Designation of symbols and buttons on the key fob

Using the symbols on the display of the main key fob, the user receives information about the status of the anti-theft system. Each remote control of the Alligator security complex has an indication of the signal, battery charge, and also shows the alarm level.

Icons on the screen of the key fob Alligator series TD-350/355

Icon designations on the display of the Alligator TD-350/355 control panel:

1. A digital display that displays the current time or the value of an alarm clock or timer.
2. The door locks are locked.
3. The Anti-hi-jack function is activated.
4. Service mode is enabled.
5. The option to start the internal combustion engine at a preset time is activated.
6. The immobilizer is enabled.
7. The key fob is in low power consumption mode.
8. Remote engine start based on temperature is activated.
9. The power unit activation timer has started.
10. Sound signals are turned on.
11. Communication status indicator.
12. Shock sensor triggered.
13. GSM module is activated.
14. Limit switch opening sensor.
15. Battery level of the main key fob.
16. An attempt was made to turn on the ignition system when the alarm system was activated.
17. The turbo timer has started.
18. Two-stage disabling of security functions is activated.
19. The "Logical Neutral" option is enabled.
20. The siren is disabled.
21. Indication of active alarm mode.
22. The timer is on.
23. The alarm is activated.

Pictograms on the display of the control panel Alligator S-800/825/850/875

Meanings of the icons on the key fob for the Alligator S-800/825/850/875 alarm:

1. The state of the dialogue signal transmission process.
2. The protected object is located in the access zone.
3. "DISARM" - door locks are unlocked.
4. "ARM" - door locks are locked.
5. The immobilizer is in active mode.
6. Security system status indicator.
7. The alarm is activated.
8. The timer has been set.
9. Numerical display displaying time and temperature from the sensor.
10. Activation of the shock sensor.
11. Call the driver.
12. The connection to the GSM system has been established.
13. Ignition is on.
14. Silent operation of the security complex.
15. The Anti-Robbery function is active.
16. Key fob battery charge indicator.
17. Blocking the remote control keys from accidental pressing.
18. The hood of the car is open.
19. Service mode activated.
20. Indication of the automatic engine start process.
21. The control panel is in low power consumption mode.
22. Turbo timer activated.
23. Additional security is included, requiring a PIN code to be entered to activate and deactivate the alarm.
24. The door limit switch is open.
25. Remote control sound notifications are enabled.
26. Starting the internal combustion engine using a timer.
27. Vibrate alert mode.
28. Activation of engine operation by alarm clock.
29. Starting the power unit based on voltage level.
30. The internal combustion engine is activated.
31. Starting the engine based on the temperature sensor readings.
32. The luggage compartment limit switch is open.

Icons on the screen of the main key fob Alligator D-910

Designation of pictograms on the display of the Alligator D-910 control panel:

1. The connection status between the device and the anti-theft system.
2. Silent key fob operation mode.
3. Shock sensor triggered.
4. The hood is open.
5. Alarm mode activated.
6. The Anti-hi-jack function is enabled.
7. The car door limit switch is open.
8. Indication of the state of the galvanic element of the remote control.
9. The battery saving function is active.
10. The power saving mode on the main key fob is enabled.
11. Security mode activated/deactivated.
12. The vehicle engine is started.
13. The system is in service mode.

Icons on the screen of the key fob Alligator TD-320

Meanings of the icons on the screen of the main key fob Alligator TD-320:

1. The alarm function is activated.
2. The timer operation time has been set.
3. The trunk lid of the vehicle is open.
4. Indication of shock sensor activation.
5. The handbrake lever is raised.
6. Anti-robbery mode is enabled.
7. Engine operation indication.
8. The security system alarm is activated.
9. The 2-stage disarming mode is activated.
10. The immobilizer is enabled.
11. Daily automatic engine start is activated.
12. Remote activation of the internal combustion engine by timer is enabled.
13. Autostart of the internal combustion engine is carried out according to the readings of the temperature sensor.
14. Digital display displaying time, temperature or system messages.
15. Signal transmission indication.
16. One of the vehicle doors is open.
17. Triggering of the “limit switch” of the engine compartment lid.
18. Call the driver.
19. Valet mode activated.
20. The ignition system is turned on or the key fob keypad is locked.
21. Vibration mode is activated.
22. The door locks are locked.
23. Remote battery low indicator.
24. Sound alerts are enabled.

L Series Binding Features

It is possible to program the key fob in the L series security system as follows:

1. Disarm the car.
2. Sit in the driver's seat.
3. Turn on the ignition.
4. Move the “Jack” switch three times from the off position to the on position.
5. Wait for one siren signal. The indicator will flash once. The programming mode will turn on, allowing you to configure the control of Channel 1.
6. Press button 1 or 2 on the key fob. The selected key will control the first channel.
7. A long alarm signal will confirm that the alligator key fob has been successfully registered.
8. Change the position of the Valet switch once.
9. Wait for a long beep.
10. Check that the indicator flashes twice.
11. Start programming the second channel.
12. Press and hold the remaining unregistered button.
13. Wait for a long sound of the siren.
14. Wait 15 seconds. You can speed up the deactivation of the programming mode by turning off the ignition or double changing the position of the “Valet” switch

When binding the Alligator alarm key fob, regardless of the series, it is important to complete each action within a 15-second interval.

Otherwise, the programming mode is automatically deactivated. To reflash the key fobs, in this case, you need to start all over again.

Tired of paying fines? There is an exit! Forget about fines from cameras! An absolutely legal new product - Traffic Police Camera Jammer, hides your license plates from the cameras that are installed in all cities. More details at the link.

• Absolutely legal (Article 12.2);
• Hides from photo and video recording;
• Suitable for all cars;
• Works through the cigarette lighter connector;
• Does not cause interference to radios and cell phones.

Find out more Subscribe so you don't miss anything important

Content

• Instructions for enabling and disabling auto start on Alligator alarms

Pros and cons of the remote

Advantages of the Alligator car alarm key fob with auto start:

1. Remote setting of the anti-theft system. The user has the opportunity to change the parameters of the alarm functions from the key fob without interacting with the service button located in the car interior.
2. Availability of two-way communication. Transmitting information online between the remote control and the system allows the car owner to remotely receive all the necessary information about the state of the complex and the alarm level.
3. Automatic engine start. This function remotely activates the operation of the power unit, warming up the internal combustion engine without wasting the user’s time.
4. Ergonomic and shock-resistant housing.

Disadvantages of the control panel:

1. Fast battery discharge. Despite the fact that the device uses low power consumption technology, the key fob batteries must be changed at least once a month. In addition, the galvanic cell is inconvenient to remove and install due to the shape of the communicator body.
2. Functions malfunction. On some remote controls, the alarm setting modes function incorrectly and intermittently. The problem is solved by returning to factory settings.
3. Instability to external damage. During operation, many scratches form on the body of the key fob, which worsens its appearance, but does not affect the operation of the device. In order to avoid this problem, you need to purchase a cover.

Possible problems and their solutions

Malfunctions often occur in the operation of Alligator alarm systems. Sometimes they are explained by a banal discharge of batteries or loss of on-board voltage. Before you go to the service center with complaints, you should evaluate these nuances and find the cause of the malfunction. Sometimes the problem can be fixed at home without the help of a specialist. If a software failure occurs, it is better to call a mechanic.

• Alarm Red Scorpio
• TOP alarm systems with auto start
• How to unlock the radio on a Ford Focus 2
• How to register the Starline A93 key fob

Buy key fobs for alarm Alligator

Cost of control panels for the Alligator security system of various models:

Video: setting up autostart from the key fob of the Alligator anti-theft complex

The “BilarmRu” channel shows how to correctly program the automatic start of a motor from the control panel.

Modern Alligator security systems are complex electronic devices with two-way communication that provide a full range of anti-theft measures and the ability to control vehicle service functions from a distance. With their help, you can start the engine or turn off the car using the key fob, configure autostart at a given time and according to certain temperature indicators, while simultaneously monitoring the state of the security mode.

Connecting a new car alarm pager with feedback

Synchronization of the control panel of the Alligator anti-theft system is performed according to the following algorithm.

1. Turn off security mode. Turn on the ignition.
2. During the allotted period of time (fifteen seconds), turn on “Jack” three times. The system will emit three siren sounds and the LED will flash slowly.
3. Click the “closed lock” button on the remote control. A long CHIRP will follow. The transmitter will make one sound.
4. Repeat the previous step for the remaining key fobs.
5. Exit recording mode by turning off the ignition or doing nothing for fifteen seconds. You will hear a short and long siren signal.

Equipment

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

Any car alarm model includes two transmitter key fobs: a main one with five buttons with an LCD display and an additional simple 4-button one. The first one is designed to enter the programming setup mode in manual mode, and is equipped with a two-way communication module - command execution confirmation signals are displayed on its screen in the form of an indication of special characters and are accompanied by sound signals, melody or vibration. A simple transmitter with four buttons, which duplicate the functions of the main one with the exception of the service one, is intended only for controlling the system in a given algorithm.

Remote engine starting can be done from both transmitter key fobs; to do this, you need to press the buttons in a certain sequence. These combinations have their own variations for different types of alarms. It is important to remember: starting the car and turning off the engine is always the same combination.

Alligator remote engine start/stop security systems are fully compatible with automatic and manual transmissions, as well as gasoline or diesel units.

If the start does not take place from the first command, the starter will be turned off automatically for a few seconds, followed by an attempt to start. The system will cancel the engine start only after the third time. The corresponding indication with the specified melody or vibration should appear on the display of the main key fob, the car siren will give one short signal, and the turn indicators will turn on twice.

Safety rules for remote or automatic engine starting:

• The car must be parked in an open space - starting in a garage or underground parking is not allowed;
• Always keep the parking handbrake on;
• On vehicles with a manual transmission, the gear indicator is fixed in the neutral position, and in an automatic transmission - in the “PARK” position;
• There must be sufficient fuel in the fuel tank;
• The auto start function must not be used when there is a passenger or animal in the cabin.

Setting up autorun

The Alligator autostart function allows you to independently set car engine start modes based on temperature, control warm-up time, set automatic start and stop hours in various combinations

You can configure autostart on the Alligator alarm system in programming mode:

1. To enter the service mode, lock and hold the button on the main transmitter for 2 seconds (in models C-500, C-5, TD-350 this is service F ). The display will turn on and beep depending on the alarm type.
2. To select automatic start by time, press - the “timer” symbol will appear on the display, the key fob will sound a sound signal. Set the required period of time (1-2-3...24) using the button (each time you turn it on, the key fob will give a signal and the car’s turn signals will work once).
3. To select autostart based on temperature, press in service mode, the “temp” icon will work, the key fob will sound and the direction indicators on the car will sound. A digital value will appear on the display: select the desired temperature mode by pressing sequentially.
4. Exit the autorun setup program: turn on and hold the button for 2 seconds. After exiting the service mode, the function symbols will be activated on the display of the main key fob.
5. You can disable autorun by resetting all values ​​in the menu.

Attention: work in the service mode for selecting autorun occurs within 15 seconds. If no action is taken during this time, the system automatically turns off.

Reprogramming and flashing

It happens that the key fob freezes and refuses to carry out your commands. As a solution, you need to reset the settings and restore the firmware. Or you can program a second, spare remote control. In order to properly reflash the transmitter, do this.

1. Press the “Jack” service key once. The ignition must be turned off.
2. After that, click “Valet” three more times. The siren will sound.
3. Click the buttons on the pager one by one, synchronizing them with the control unit.
4. Turn the ignition on and off immediately. Check the functionality of the key fobs.

Autorun errors

The main reasons for the failure of the automatic start system, in which the Alligator does not work, may be incorrect settings and technical malfunctions of the car engine:

• Automatic start by timer or temperature only works when the security mode is on;
• The engine runs at high speeds (silence occurs, restarts are cancelled);
• The oil pressure sensor and indicator do not work;
• The car is not set to the handbrake;
• There is no transmission "logical neutral" confirmation in automatic transmissions;
• There is no engine speed data (the tachometer does not work);
• The car doors or hood are open;
• In diesel units there is no confirmation of the readiness system of the pre-launch mechanism (warming up of the mechanisms);
• The specified time for the autorun program has expired.

For the correct operation of all settings, it is important to remember: if during a programmed start a command was given to stop the engine remotely, it will be turned off, but the device will repeat the start strictly according to the specified schedule. All program algorithms are saved when the security mode is disabled - the next time you arm it, autostart will work at the preset time until you reset the timers. During random engine shutdown, the system starts a new timing every 24 hours according to the factory settings.

The Alligator alarm system is a powerful anti-theft tool that has a lot of useful functions and settings. With its help, you can protect the vehicle from unauthorized access, as well as increase the comfort of using the machine. There are a large number of models from this manufacturer available on the market, so in order to choose the best option, you should familiarize yourself with its characteristics and operating parameters.

Models with auto start

There are different Alligator alarms that support the remote start feature. The most popular include:

The option itself can be used on any car, regardless of the type of engine and gearbox. There are two ways to autorun:

• Manual remote.
• Auto.

The first option involves pressing the start button located on the pager. The range of the communicator is 300-350 m. You can also launch it from a mobile application.

Autostart is necessary in conditions where the driver is far from the car, and you need to start the engine according to a countdown timer or temperature indicators.

The Alligator A-9 series car alarm operates at a frequency of 433.92 MHz with a range of up to 600 m. The pager is capable of receiving a signal from a distance of 1.2 km. In this case, the additional communicator operates from a distance of up to 15 m. The permissible temperature range varies -40...+85°C, and the operating voltage is 9-18 Volts.

Range may be reduced depending on vehicle placement and the following factors:

• Antenna mounting location in the car.
• Distance between transmitter and receiver.
• Current weather conditions.
• Charge level of the battery and batteries in the pager.
• Presence of radio interference.
• Building density.

The system design provides one working board, where the microprocessor and other working units are located.

The model is capable of providing security for the following areas:

• Power unit - prevents unauthorized access to the engine using electronic mechanisms.
• Openable parts of the body - protection is provided by standard or additional limit switches.

It is one of the latest models presented in the Alligator assortment. It supports the motor control function and is sold at a price of 5.6 thousand rubles.

The model belongs to the premium class and is a complete set of anti-theft devices. The technical specifications indicate the possibility of feedback and remote control of the engine, when the user can start the car from the key fob while in the home or office.

Two-way models

The company's product range includes advanced Alligator car alarms that support two-way communication. These include models:

The device went on sale in 2016 and quickly became widespread. Unlike older versions, this model supports feedback and can be controlled from a distance of up to 600 m. The maximum reception range is 1.2 km. The key fob is equipped with a digital LCD display and has a lot of flexible settings.

Optionally, the user can use CAN interfaces for connection and GSM modules. The operating frequency is 434 MHz. At the same time, radio communications are reliably protected from prohibited access using a dynamic code. Another model is made in an ergonomic style and is sold at a relatively low price.

Version C-2 also supports feedback and has an enhanced BACS protection interface. It can be used on any vehicle, including models with the Engine Start/Stop system. The manufacturer provides 5 protected zones, as well as the ability to connect additional security units.

The communication channel is reliably protected by advanced code, so the likelihood of system hacking is virtually eliminated. An LCD display with a range of up to 1.2 km is used to control operating modes.

Due to the absence of an antenna, the key fob has reduced dimensions.

All settings are concentrated on a small but informative screen. The alarm has a large number of service functions that provide maximum comfort of use and the highest degree of safety.

Available modes include:

• Disabling the immobilizer.
• Turbo timer.
• Protection when the car is running.

One-way models

In addition to alarms with a two-way communication option, simplified options with a one-way standard are also available on the market. These include car alarms Alligator ns 505 series.

The device is a modern one-way alarm with auto-start, which supports a lot of useful functions and settings, is controlled by four buttons from the key fob, and is easy to use.

The use of advanced electronic elements made the model more ergonomic. The changes also affected the colors of the patching wires - now they are unified. The device is equipped with powerful burglary protection and is characterized by the following parameters:

• Anti-HiJack mode support.
• 2-level shock sensor.
• 6 security zones.
• Support for protection against false positives.
• The presence of dynamic code that protects the system from interception by attackers.

Open loop switch replacement

The binding of a transmitter with one-way communication is carried out according to the following scheme.

1. Disarm the car.
2. Turn off the ignition. Press the "Jack" key once.
3. Click “Valet” three times, the system will beep.
4. Press the switch keys one by one, synchronizing them with the alarm control unit.
5. Turn the ignition on and then turn it off. Check the operation of the switches.

Old models

Despite the wide variety of new alarm systems, old-style models continue to be popular.

S-825RS

The device is one of the most popular in its price segment and at the same time guarantees a high degree of machine protection against theft and burglary. The system supports a number of useful functions, operates in different temperature ranges with two-way communication standards.

The kit includes a built-in pager with a screen, which allows the driver to monitor the condition of the car. Dynamic code is used as a standard of protection, eliminating the possibility of intelligent hacking. The range is 2000 and 1000 m. The first indicator indicates the ability to transmit a signal, and the second indicates the ability to change settings.

Signaling Alligator C-500 supports 2-way communication and remote engine starting using a pager with 5 buttons and a screen. All information about the state of the machine, current configurations and other indicators is displayed on the monitor and is completely Russified.

The model operates according to the 868 mhz standard, which makes it virtually invulnerable to electronic hackers. The range reaches 3 km if there is no interference at the location of the machine. This value is a record for modern anti-car theft systems.

Since the model is equipped with a CAN bus, it is less exposed to radio noise and is protected from pulse interception.

The technical characteristics of the model are as follows:

• The on-board voltage of 12 V is used as a battery for the alarm unit.
• The pager is powered by 1.5 V batteries.
• The additional key fob is equipped with 3-volt batteries.
• The system supports the function of blocking the power unit when trying to steal a car.
• A special code value is used to identify the driver.
• The processor module is equipped with an output for connecting additional locking devices.
• The device is equipped with additional channels for connecting auxiliary systems.

SP-75RS

The SP-75RS alarm system is the latest invention of the Alligator company, which is reliably protected from electronic hacking and is not afraid of urban interference. The response speed deserves special attention - it is 1/4 second.

The system supports feedback and can start the engine remotely. Key autorun functions include:

• Possibility of maintaining optimal temperature conditions throughout the year.
• There is no risk of engine freezing when exposed to severe frosts.
• Providing valuable coolness during the summer when it is hot outside.
• Ability to adapt the autorun function based on the countdown timer, temperature and other indicators.
• Daily launch at a selected time interval.
• Launch depending on the on-board network indicators.

Advantages and disadvantages of Alligator security systems

If you read reviews from users of Alligator systems, you can highlight the following advantages:

1. Notifying the car owner about prohibited actions near the car and sending alarm signals to a pager.
2. A wide selection of models, which allows the driver to choose the best option, guided by personal desires and finances. Even cheap models do their job well.
3. Burglary resistance. The use of security channels that prevent theft.
4. The basic kit includes a multifunctional remote control that allows you to deeply configure the system and remotely control the main components of the machine.
5. Compliance with all quality and reliability requirements.
6. Availability of detailed instructions for use.

The disadvantages include:

1. Frequent failures of the alarm when pressing the button. A similar problem is noticed when the battery charge level is zero, so the driver must regularly change the batteries. To fix the problem, you should use the “Valet” service button.
2. Often, when trying to activate the security functions, the doors refuse to close. A problem like this often indicates a problem with the safety device or door lock. To eliminate the defect, you should seek professional help.
3. Arbitrary alarm activation. Such a defect is noticed when the operating parameters are incorrectly selected. To determine it, you should diagnose the controller. If it is faulty, you need to replace it.

Programming an additional key fob

When the new remote control code is written to the control unit's memory, the data from the old key fobs is erased. You can register up to four remote devices in the system memory. In order to attach the key fob to the ZX 1070, 750 security complex (Valet state), follow the steps.

1. You are given five seconds for any action. If you exceed the time limit, the system will automatically exit the settings.
2. Set the mode to “Disarmed”. Turn on the ignition.
3. Press the Jack button three times. One siren CHIRP will follow. Click “Valet” three more times. The alarm will emit a long beep. You can enter pager data.
4. Press the 1st button of the first device. A long squeak will follow. The LED indicator will flash slowly.
5. Repeat the previous step with the remaining remote controls.
6. Exit recording mode by turning off the ignition. You can exit in another way, without doing anything for eight seconds. The action will be confirmed by one short and long squeak of the siren. The LED will go out.

User guide

To set up the Alligator alarm, you should study the instructions for use first.

Installation instructions

To install the Alligator alarm system, you need to understand the basic intricacies of installation. They consist of the following stages:

1. Planning the installation site. The driver must provide an optimal place, hidden from prying eyes, to connect the batteries. To do this, you need to familiarize yourself with the connection diagram
2. Preparation for installation of a microprocessor device. The part must be installed in a hidden place, behind the control panel, so that an attacker cannot hack it.
3. The next stage involves installing the signaling system in the engine compartment. You need to place a siren and a temperature sensor near the engine. The controller is fixed in one of the cooling system lines,
4. Next, the driver does interior work, when he installs the sensitivity controller, transceiver and additional parts. The switches are attached to the doors. If the car is new and there are no technological holes on the doors, you should talk to the dealer before drilling.
5. After completing the installation of all working units, they need to be connected to the processor unit by removing part of the interior trim and securing the electrical circuits under the upholstery.

Connection diagrams

To simplify the connection of working mechanisms and parts, you need to familiarize yourself with the Alligator alarm connection diagram.

User manual

When studying the operating instructions for the Alligator user, you need to understand the designation of the basic buttons, programming features and other configurations.

What do the icons and buttons on the key fob mean?

The pager of many Alligator alarm models has 4 buttons. To understand their purpose, you should study the instructions for using the key fob.

How to enable and configure autorun

To enable automatic engine start, you must ensure that the following rules are followed:

1. The machine is located in an open space with good air exchange.
2. The car is on the handbrake.
3. The automatic transmission selector is moved to the parking position, and the mechanical lever is placed in neutral gear.

To open the settings menu, you need to hold down the F button.

Other settings

Alligator alarms also provide other settings, including an alarm clock and a timer. To activate the first option, you must simultaneously press the F key and the open trunk button. The successful activation of the function will be signaled by a corresponding sound.

How to register remote controls for Alligator L models

The Alligator L pager, which has 4 buttons, can be linked as follows.

1. Disarm the car. Turn on the ignition.
2. Press the Jack key three times. The siren will sound once and the LED will light up once. The control unit is ready to record a new control panel for channel 1.
3. Press key 1 or 2 on the remote control to tune to channel 1. A long siren signal will sound, indicating that programming is complete.
4. Turn on the "Jack" button once.
5. One sound will follow and the LED will light up twice. Channel 2 will be programmed.
6. Press the remaining button on the communicator (if you used key 1 or 2, you cannot press it again). The siren will emit a long signal - channel 2 programming is completed.
7. To exit the recording mode, turn on the ignition or press “Valet” twice.
8. The siren will sound for a long time.

We also have an instruction manual for the Tomahawk TZ 9020.