How to program an Alligator key fob for a car alarm with auto start: instruction manual

Alligator alarm key fobs of various models and functions are configured in a special way, but only after binding to the control unit. Recording of remote controls in the memory of the anti-theft system is carried out according to one algorithm, using the “Valet” key. Up to four pagers can be programmed. If for some reason programming fails, you should immediately contact the service center. After all, more modern models of Alligator remotes require manual code entry. We will discuss in more detail how to attach a key fob to an Alligator alarm later.

We also have a Tomahawk 9020 instruction manual.

Instructions for setting up key fobs M, D, S series

Security system M, D, S series (A1, C300, A2, NS 505, A1S, S825 RS, A2S, D1000, 868, C2, SP75 RS, C 2C, S400, A 3 S, A 9, TD 350, A 3, S 3S, M 1500, S 5, M 700, S 500, s 725 rs, 325 2 buttons, D910, S 250) allows you to record up to four transmitters. But you can only use two five-button or four-button ones. When binding, previously stitched key fobs are deleted from memory. Sequencing.

1. Disarm the vehicle.
2. Within fifteen seconds after deactivating the ignition, press the “Valet” key three times (non-coded mode is selected).
3. The siren will sound once. The LED will flash quickly. The control unit is ready to record remote control codes.
4. Briefly press the F button on the communicator. D series transmitter – hold F for a while.
5. A long siren signal will follow – programming has been successfully completed.
6. Use the same principle to register the rest of the keychains.
7. Do nothing for fifteen seconds or remove the keys.
8. Wait for one long and short siren signal. You have left programming mode.

If you use a system shutdown using a secret code, follow these additional steps.

1. Switch the ignition “On” - “Off”.
2. Complete this step in fifteen seconds. Click “Valet”, the number of clicks is the first value of the service code.
3. Click the ignition “On” - “Off”.
4. Also enter the second number of the password.
5. Crank the ignition.
6. Perform transmitter programming.

Download operating and configuration instructions in PDF

Manuals can be viewed and downloaded for free from the table:

Manuals in Russian for the use and installation of alarms

Instructions for Alligator A-1

Instructions for Alligator A-1S

Instructions for Alligator A-2

Instructions for Alligator A-2S

Instructions for Alligator A-3

Instructions for Alligator A-3S

Instructions for Alligator A-9

Instructions for Alligator C-2

Instructions for Alligator S-2C

Instructions for Alligator S-300

Instructions for Alligator C-3C

Instructions for Alligator C-5

Instructions for Alligator C-500

Instructions for Alligator NS-505

Instructions for Alligator S-825RS

Instructions for Alligator SP-75RS

How to register remote controls for Alligator L models

The Alligator L pager, which has 4 buttons, can be linked as follows.

1. Disarm the car. Turn on the ignition.
2. Press the Jack key three times. The siren will sound once and the LED will light up once. The control unit is ready to record a new control panel for channel 1.
3. Press key 1 or 2 on the remote control to tune to channel 1. A long siren signal will sound, indicating that programming is complete.
4. Turn on the "Jack" button once.
5. One sound will follow and the LED will light up twice. Channel 2 will be programmed.
6. Press the remaining button on the communicator (if you used key 1 or 2, you cannot press it again). The siren will emit a long signal - channel 2 programming is completed.
7. To exit the recording mode, turn on the ignition or press “Valet” twice.
8. The siren will sound for a long time.

We also have an instruction manual for the Tomahawk TZ 9020.

Reprogramming and flashing

It happens that the key fob freezes and refuses to carry out your commands. As a solution, you need to reset the settings and restore the firmware. Or you can program a second, spare remote control. In order to properly reflash the transmitter, do this.

1. Press the “Jack” service key once. The ignition must be turned off.
2. After that, click “Valet” three more times. The siren will sound.
3. Click the buttons on the pager one by one, synchronizing them with the control unit.
4. Turn the ignition on and off immediately. Check the functionality of the key fobs.

How to enable engine autostart using the Alligator remote control

The Alligator alarm kit includes two remote controls: a five-button and a four-button. The engine can be started from either a 5-button or 4-button key fob. To do this, you need to know the sequence of keystrokes.

The Alligator anti-theft system allows you to independently set the auto start of the car based on temperature, control the warm-up time, and adjust the time for automatic engine start and stop.

1. Enter service mode by holding the F key for two seconds on the main pager. The screen will turn on and a beep will sound.
2. Press F again, the display will show “timer”. CHIRP will follow.
3. Select the desired time period in hours (1-2-3-4-6-24). Each press will be accompanied by a squeak and the turn signals will activate.
4. Select temperature trigger mode. The “tempo” symbol will appear on the screen. The key fob will emit a melody and the turn signals will blink. Select the required autostart temperature (-10, -15, -20, -25).
5. To exit, press the F key for two seconds. After exiting, the symbols for the selected functions are activated on the display.
6. To disable autorun, reset the values ​​in the menu.

We also have instructions on how to use the Tomahawk 9020 key fob on our website.

How much does an Alligator alarm cost?

You can buy Alligator car alarm models at the following prices:

Name	Price, rub
Alligator A-1	1800
Alligator A-1S	1815
Alligator A-2	2000
Alligator A-2S	2090
Alligator A-3	2100
Alligator A-3S	2250
Alligator A-9	6350
Alligator S-2	3900
Alligator C-2C	4000
Alligator S-300	4400
Alligator S-3S	5400
Alligator C-5	8900
Alligator S-500	10400
Alligator NS-505	3000
Alligator S-825RS	5400
Alligator SP-75RS	4900
Prices are relevant for three regions: Moscow, Chelyabinsk, Krasnodar.

Connecting a new car alarm pager with feedback

Synchronization of the control panel of the Alligator anti-theft system is performed according to the following algorithm.

1. Turn off security mode. Turn on the ignition.
2. During the allotted period of time (fifteen seconds), turn on “Jack” three times. The system will emit three siren sounds and the LED will flash slowly.
3. Click the “closed lock” button on the remote control. A long CHIRP will follow. The transmitter will make one sound.
4. Repeat the previous step for the remaining key fobs.
5. Exit recording mode by turning off the ignition or doing nothing for fifteen seconds. You will hear a short and long siren signal.

Programmable functions for your alarm

Alligator allows you to program the following features:

• service: automatic door locking based on a tachometer signal or when the ignition is turned on, unlocking the car based on tachometer readings, protection against false alarms, etc.;
• security functions: activation of protection with or without locking doors, passive engine blocking, activation of Anti-HiJack mode and more;
• Remote engine start: starting the car based on temperature, time. Special mode for turbocharged cars and more.

Open loop switch replacement

The binding of a transmitter with one-way communication is carried out according to the following scheme.

1. Disarm the car.
2. Turn off the ignition. Press the "Jack" key once.
3. Click “Valet” three times, the system will beep.
4. Press the switch keys one by one, synchronizing them with the alarm control unit.
5. Turn the ignition on and then turn it off. Check the operation of the switches.

Technical description

Most Alligator key fob models, such as the S-475 and S-800-850, as well as the 875RS, have the following features:

• programming capability;
• LCD screen;
• backlight;
• vibration call;
• alarm control at a distance of no more than 800 m.

With the Alligator key fob, you can monitor the condition of your car at any time; if something happens to the car, the miniature speaker of the key fob will notify you of the incident. Therefore, there is no need to worry about the car when it is not parked in the garage.

As soon as the system is activated (hacking), the key fob will begin to vibrate and the speaker will turn on (a sound signal). A special indicator of the zones that triggered the signal will appear on the key fob screen.

Why is the Alligator key fob not programmable?

The remote control for the Alligator alarm system broke down, and you decided to flash a new one. But I can't unlock the transmitter. Why can this happen with key fobs (TD 350, M2200, D 910, 975, S850RS, M 2200, S 875rs, S 200, M800, S400) and how to fix it?

1. Pager failure. Repair it yourself or replace it with a new one.
2. The “Ignition on” command is not detected by the control unit. Contact the specialists.
3. Jack mode was accidentally activated. Turn off and repeat the procedure for writing switches.
4. Damage to the control unit. Contact the service center.

How to determine the alarm model by key fob

The manufacturer's alarm model Alligator can be determined by the description of the appearance of its key fob:

1. TD-350/355. Remote controls in this series have a vertical screen orientation. The device is equipped with a non-removable antenna, which is part of the housing. The keychain is made in silver with black edging.
2. D-910. The communicator has a small screen, the area of ​​which does not exceed 1/3 of the front panel of the key fob. The device has a removable black plastic antenna and a body with round silver inserts.
3. S-800/825/850/875. The key fob features a horizontal screen orientation with a white backlight. The body is made of dark gray plastic and equipped with a built-in antenna. This security system, unlike others, has the function of auto-starting the engine based on voltage, so the display has a characteristic icon in the form of a lightning bolt.
4. TD-320. The device has a black body with a thin silver insert around the display and an enlarged eyelet for attaching to a keychain. The remote control screen has a vertical orientation and is distinguished by a large lock icon in the middle.

Photo gallery: Alligator security systems

Photos of alarms with feedback from the Alligator company.

Alligator D-910

Alligator S-800

Alligator TD-320

Alligator TD-350