The presence of security alarms in modern cars is a current reality. They have a lot of additional functions, which include remote start by time or alarm, turbo timer, automatic heating of the cabin, etc. The main thing in this case is to program the remote control correctly. You can learn more about setting up the Starline A93 key fob from this article.
This system belongs to the advanced price segment, and the remote control itself has four buttons and a large liquid crystal display that provides comprehensive information about the current status and currently connected functions. How to activate the Starline A91 alarm key fob.
Button combinations and functions
To control the work, control panels with 4 (master) or 3 (auxiliary) buttons are used. The display shows the functions being performed and allows you to identify the zones that triggered the alarm mode. A list of functions activated by various key combinations is given in the instructions. The algorithms do not depend on the installed firmware version.
Possible options for manipulating the remote control buttons:
- short press performed on 1 or 2 buttons simultaneously or sequentially;
- long hold (until the remote control speaker gives a signal);
- sequential impact on 1 key;
- combined impact (long-term - on one button, after giving a signal the driver presses the second).
Key fob commands
The meaning of the commands transmitted by the remote control is given in the technical documentation. The buttons have symbols in the form of pictograms that simplify the procedure for controlling the complex. Additional icons on the display show the progress of tasks. The key fob has a button lock that protects the complex from random commands.
To activate the protection mode, you must simultaneously press the button marked with a circle icon and the key located next to the red button of the circular configuration. You can unlock the keys by simultaneously pressing the red plastic button and the key with the circle symbol. On the auxiliary remote control, the unit is turned on by pressing the keys located closer to the edges of the case. You can remove the protection by simultaneously pressing the keys with triangle icons.
Setting up the main key fob function menu
Using buttons, the driver gives commands that allow:
- program the time and alarm;
- activate alarm;
- set a countdown timer;
- adjust the volume level of alarm signals;
- activate silent mode;
- select the type of sound notification.
Adjusting the sensitivity of the tilt shock sensor
The shock sensor is configured through the main control panel (with the fuel mixture ignition system turned off). The driver presses and holds the button located near the circle sign key until the signal is given. Then the action is repeated, and the digital value of the parameter (warning zone) is displayed on the screen. Keys with triangle symbols are used to adjust the parameter.
To proceed to programming the alarm level, you need to once again long press the key that was used to enter the adjustment menu. The adjustment is made using a similar method; to deactivate the shock sensor, you need to set the levels to zero. The tilt sensor setting is activated by long pressing the button with the circle sign. The parameter is adjusted in the same way; to deactivate the tilt sensor, you need to program zero sensitivity.
Transfer to service mode
How to switch the alarm system to service mode without the Valet button? To do this, use the on-screen menu of the main key fob:
- Briefly pressing button 4 of the main key fob, move the cursor to the “Wrench” icon.
- Briefly press button 3 - the alarm control LED will start to light constantly, the “Wrench” icon on the screen will do the same.
The service mode is turned off in the same way - move the cursor to the icon, but press button 2 to clear the icon.
If your StarLine alarm system has telematic capabilities, then everything is even simpler. With standard control icon settings, slide your finger to the left the main set (engine start/security status/car search) to see the second set: anti-robbery/service mode/call. By pressing and holding the central icon, you activate the service mode, which will be reflected both in the application and on the screen of the main key fob.
On older alarm models, where the main key fob has three buttons, entering the on-screen menu of the key fob is done in a different way:
- Long press button 3 until you hear two beeps (first long, then short).
- By pressing button 3 briefly, move the flashing cursor to the “Wrench” icon.
- Activate the service mode by pressing 1.
It turns off the same way - by pressing 1 when the cursor is hovering over the icon of the active service mode, you will turn it off.
Something else useful for you:
Programming Sequence
To adjust functions and additional channels, a cursor-based setting is used, which allows you to select the required icon on the display and forcefully start the mode. Additional settings for the tables are carried out through the menu; entry is made by pressing the special Valet button 5 times.
A table of programmable security and service functions (AF) is given in the documentation; the driver selects sections and assigns the required parameters using buttons located on the remote control. To configure the automatic operation of the motor, a separate table of programmable start functions (SF) is used. Additionally, the functionality of the channels and the volume of the signals given by the car when receiving commands are adjusted.
Contents of delivery
StarLine alarms, with the exception of those with the ECO prefix, come with two key fobs: the main one with an LCD display and an additional one, which has three keys. Moreover, unlike most alarms, the additional one works with feedback, which is due to the very essence of the dialogue protocol: when an alarm is triggered, the alarm first transmits information to the main key fob, and not finding it, communicates with the additional one, and it sounds an alarm sound.
The batteries in them are different: the most energy-intensive and frequently used main key fob uses a standard “pinky” AAA battery, which lasts for a month. This is due to the fact that the alarm regularly tries to communicate with the key fob, even if nothing happens - and these regular reception and transmission sessions reduce the battery life. Therefore, when purchasing a StarLine alarm, buy a pair of nickel batteries with a charger: these costs will be recouped by not having to regularly buy batteries.
Programming the CAN interface channel
To enter the programming mode of the complex, the block supplying power to the processor unit is turned off. Then the adjustment key is pressed and held, while the power circuits are connected. The siren will sound 5 beeps, after which you must release the key. The transition to the CAN parameter settings menu occurs automatically (confirmed by 4 signals). The selection of the subsection and car model is performed using the adjustment button (Valet), the standard key fob is not used during setup.
How to set up a key fob
The owner programs the functions of the control panel using the cursor method, selecting icons on the display. A description of the modes and algorithms for operating the buttons is given in the operating instructions. The driver can purchase an additional key fob for the Starline A93 alarm system, and then register the device in the complex’s memory. The equipment supports up to 4 devices; the number of registered remote controls is checked by the number of flashes of the control indicator (the algorithm is described in the documentation).
To register the Starline A 93 key fob, you will need to enter the setup menu by pressing the button hidden hidden in the car interior 7 times. Then the ignition is activated, the owner simultaneously operates the red button and the key located next to it. If the binding is correct, a short signal is given by the siren and buzzer. After the algorithm starts, the remote controls in memory are deleted, and the procedure is repeated for the remaining products. Key fobs must be linked in one setup cycle.
For the A93 of the early series, remote controls with a horizontal display were used; later, a modified key fob with a vertical screen was used. New firmware is used for the products; an additional immobilizer control algorithm is not provided. The devices are interchangeable; problems with setup arise only with Chinese analogues.
Conditions for autorun
To ensure the motor starts, the following conditions must be met:
- the limit switches under the hood cover are in the closed position;
- a special programming algorithm for the neutral position of the lever has been completed (for a manual transmission);
- The gearbox control lever is moved to the parking position (for automatic transmission).
Setting the software neutral
When installing and configuring the A93CVW complex, support for the working mixture ignition system is installed and a method for completing the neutral programming algorithm is selected. The complex ensures the start of support after applying the handbrake, followed by removing the key from the lock or pressing the button on the control panel. During operation, the owner can change the setting.
To configure the parameter, you must use the Starline A93 key fob and additional controls:
- Start the algorithm for supporting mixture ignition circuits (depending on the programmed option). A prerequisite is to set the parking brake lever to the working position.
- Take the key out of the lock and leave the salon. The control panel displays an icon of the running motor and the time remaining until it stops. Once the door is locked, the unit stops. If the turbo timer is activated, the engine will continue to function.
- Activate the security function using the remote control. When using a turbo timer, stopping the engine does not affect the activated vehicle protection.
Trigger by time
The equipment supports automatic start of the power unit based on signals from an alarm clock or timer. The alarm clock supports daily warm-up at a specified time, the use of a timer allows you to perform periodic start procedures (within the limits of the battery's capabilities). The display shows icons that go out after warming up is complete. Sometimes the icons turn on spontaneously; the key fob does not display such information often; to eliminate the defect, you need to contact a service center.
Auto start on alarm clock
The A 93 key fob with auto start allows you to set the start of the power plant by an alarm signal. Before programming begins, the current time is set and the alarm value is stored in memory (confirmed by an icon with a bell icon). The driver then moves the cursor to the clock icon and activates the function (by briefly pressing the red button). The display shows the start time value, followed by a clock indication.
Trigger by timer
The key fob with display included with the A93 complex allows you to enable periodic start by timer.
To start the algorithm, select the icon with the hourglass symbol with the cursor and activate it by pressing the red button.
By pressing a button made of red material, the start frequency is selected. To confirm the procedure, you need to save the parameters (automatically or by long-pressing the security mode control button). Between adjustment stages, additional signals are given by the remote control buzzer (short and melodic).
Trigger by temperature
To activate a temperature start, select an icon on the display with a thermometer symbol. After activating the mode (red button), the start temperature value is displayed on the screen. The owner configures the key fob, adjusting the value at his own discretion (the temperature is changed by briefly pressing the red rubber key). To memorize the function, you need to hold down the red button; the temperature start icon on the display remains active.
Alarm Installation Instructions
This security system is very complex in its design, because it interacts with many car parts (starter, temperature sensors, etc.). Therefore, its installation is carried out via the 2Can2Lin bus and has a lot of features. It is best to carry out this procedure in service centers, where a master specialist can carry out a competent installation.
Some car owners are put off by the relatively high cost of such work. According to 2017 data, it was 6-8 thousand rubles. Many drivers try to carry out the installation themselves. This can be done, but it will require:
- a set of tools including side cutters, screwdrivers, knives and a soldering iron;
- drill with drills;
- an industrial hair dryer capable of heating temperatures up to 400 degrees Celsius;
- tester for checking quality connections to the Can or Lin bus;
- set of heat shrink tubes.
Below is a detailed video on how to do it yourself.
Setting the volume of siren confirmation signals
To determine the sound volume of the Starline A93 alarm when controlling security functions, you will need:
- Make sure that the external siren control mode is active (configured via the central unit).
- Activate the main menu by pressing the setting key 5 times.
- After activating the ignition, find the SOUN section on the display (switching is done using buttons with a triangle symbol).
- Long and then short press the key located next to the button with the circle icon. The owner adjusts the volume in the range from 1 to 9, the parameter is displayed on the display. Silent operation mode involves setting the value to 1.
Review of car alarm StarLine A93
Keychain Starline 93
Thanks to a special modern CAN + LIN module, the installation of the A93 security complex itself is simplified. The functionality of the system on cars is significantly expanded. An excellent choice for the domestic auto industry, with the characteristic lack of digital buses on vehicles. If desired, the device can be easily configured yourself, although it is better to entrust this to professionals. The same applies to StarLine A91.
The difference from previous analogues is the recognition of any attempts to break into the car and do something with it. Thanks to modern sensors, the owner can even know when the vehicle is about to be towed. The Starline alarm system lets you know automatically.
Special attention to the key fob with shockproof complex. The main control has an informative display that provides all the necessary information, including according to the previous version of Starline A91
The alarm works without problems using a timer and temperature sensors. This is especially convenient when certain engine characteristics need to be maintained at a specific level. The system automatically turns off all power if attackers try to hack the vehicle while it is warming up and working with standard programs.
The vehicle's location can be tracked using maps after connecting GPRS or GLONASS modules at the owner's choice.
This will also help if the car is stolen. The main thing is to conduct several tests in advance to understand what operating mode and alert level will be successful. This is what they do when owning Starline A91.
How to reset settings
The Starline A93 alarm system allows you to return programmable sections to factory values:
- To reset the parameters described in 2 tables, you need to press the key to enter the setting (Valet) 9 or 10 times, respectively.
- Apply current to the mixture ignition support circuit.
- After sound signals are given, indicating that the signal is ready for the procedure, you need to press the key again.
- A short beep will sound. After this, the driver presses the red button on the remote control.
- To reset the parameters in the second table, you must repeat the procedure.
- Exit from the adjustment mode occurs automatically or after the ignition support circuit is broken.
Resetting the parameters makes it impossible to remotely or automatically start the power unit. Resetting the settings of the central unit may make it impossible to start the engine using the normal method, as well as cause malfunctions in the operation of the security system and vehicle electronics. The owner sets up the car alarm in accordance with the instructions and technical features of the car.
- Starline keychain does not work
- How to turn off the Starline A93 alarm
- Starline A92 installation instructions
- Which stamped wheels are better?
Key fob repair
Although the company uses impact-resistant plastic, the need to replace the case or glass of the key fob may arise. It is difficult to find individual original parts - the manufacturer itself sells complete keychains, but you can find them on Aliexpress if you wish. And taking into account the fact that the Chinese have long and fruitfully collected clones of StarLine alarm systems (for some time now they have been officially sold in Russia under the Red Scorpio brand, and even the printing of instructions and booklets is the same (!)), and outright fakes, spare parts for key fobs StarLine is represented in abundance on Asian trading platforms.
To disassemble the main key fob, remove the battery by sliding the battery compartment latch, then remove the small Phillips head screw. In addition, the halves of the case are held in place by latches: carefully prying the back cover off from the side of the ring (it’s convenient to use a guitar pick, a thin metal plate), remove the cover from a pair of latches, and then continue to unclip them around the perimeter.
After this, we remove the internals - the main board, the transceiver board and the display. At the same time, it is worth noting the quality of soldering of microbuttons - if in cheap alarm systems they are soldered by the body to the board at two points, then in StarLine they are soldered at four points, so they are less likely to be pressed through, coming off the board.
But you won’t be able to simply replace the display on this key fob - the cable is fixed to the board, and without experience with such installation, success in replacement is very doubtful. It is better to replace a broken screen in a workshop - there are many similar offers on the market. A faulty key fob often causes the alarm to not open the car doors.
