Scher-Khan Logicar: Instructions and manual in Russian

Vehicle control at a distance of up to 1500 m.

Signal encoding according to the MAGIC CODE™ PRO 2 standard and AES-128 encryption allow you to stop any attempts at intelligent hacking.

The contrasting display and convenient menu create maximum operating comfort.

In addition to security statuses, the key fob displays useful information about the engine temperature, battery charge level, key fob battery voltage level, and indicates the engine operating time during autostart.

Economical food.

The keychain is made of high-strength plastic with ultraviolet coating, which provides maximum protection from scratches.

ATTENTION! This model has been discontinued, but the consulting support of hotline specialists on its operation remains valid. Repairs to this system are no longer carried out at our certified technical centers.

ACTIVE SECURITY

A two-digit access code to the car interior is an additional security line. Entered from the key fob and known only to the owner.

Protection against various methods of theft, including intelligent hacking using computer equipment.

Personal access code to disarm the system if the key fob is lost.

Security mode for a car with the engine running.

COMFORT OF OPERATION

Possibility of driving a second car.

Control of security functions using the vehicle's standard key fob.

Personal code for disarming the system if the key fob is lost.

Security without siren warning signals if you are in the yard of your own home.

Low system power consumption.

COMFORT OF OPERATION

A model for the budget-conscious car owner.

Stable communication in urban and rural areas.

Manufacturer's warranty – 5 years.

Technical support from the manufacturer throughout Russia and neighboring countries.

Designed for Russian conditions - reliable operation in the range from -85 Cº to +50 Cº.

Operation Manual Alarm System…

Page 2

Image
Text

Manual

Vehicle alarm system STSTS

SCHER-KHAN LOGICAR 1

(hereinafter referred to as the system) corresponds

mandatory requirements in the GOST R certification system,

requirements for car security devices: GOST R 41.97-99 (Uniform regulations regarding official

approval of vehicle alarm systems

(STSTS) and motor vehicles in relation to their systems

alarm system (STS)) GOST R 50009-2000 (Electromagnetic compatibility of technical equipment.

Technical means of security alarm. Requirements and Methods

tests) Thank you for purchasing a two-way car security system

systems SCHER-KHAN LOGICAR 1

Our company's continuous research and development embodies

the most advanced ideas and serve to satisfy all needs

users of our systems. System SCHER-KHAN LOGICAR 1

is a complex electronic

vehicle equipment. From its functioning and correct

installation depends on the safety of your life, health and road

situation, the quality of work of nearby radio-electronic

equipment and communications. Trust the installation of the system only

specialized service stations. During operation

Periodically check that the system is functioning correctly.

attention!

When purchasing, check that the warranty card is filled out correctly.

The manufacturer and system supplier are not responsible

for any disregard of the installation manuals and

operation, as well as for errors made during installation.

If problems arise with the operation of the system,

please contact the service center immediately for

diagnostics or consultation.

The manufacturer reserves the right to make changes to the system design

in order to improve consumer properties

Owner reviews

№	Positive
1.	Petrovich (avtozvuk.ua): I’m happy with the security system, the standard functions are sufficient for my VAZ.
2.	Mikhail (rozetka.ua): the Sherkhan V signaling system has been installed for three years, no complaints. Anyone who thinks that it is not relevant should look for the best offers at that price.
3.	Sergey Vladimirovich (hotline.ru): when purchasing a Lada Priora from the previous owner, the security guard Sherkhan V was installed. I didn’t change it, I’m happy with the budget option with a minimal set of functions.
4.	Vasilyevich (avtozvuk.ua): Even though the alarm system is already outdated, it copes with its functions well.
5.	Artur Vasilievich (ugonavto.net): I have been using the Sherkhan Logikar V alarm system for three years, there are no special comments. It may be outdated, but the standard functionality is sufficient for security. I leave the Opel Astra in the garage at night.
6.	Dmitry Stepanovich (ugonavto.net): during the operation of the alarm, I changed the batteries three times and no more replacements. The quality is good, the price was relevant at that time.
7.	Negative
8.	Victor (avtozvuk.ua): the signaling system is already outdated and is not capable of performing security functions. I will change it to a new one from the Magikar 10 version.
9.	Petrovich (ugonavto.net): after three years of active use, Sherkhan V began to malfunction, with periodic false alarms. It's time to update the security complex.
10.	Vasily (hotline.ru): in order to improve safety, replace Sherkhan B with a newer modification as soon as possible.
11.	Ivan (ugonavto.net): I do not recommend Sherkhan Logicar V due to its obsolescence and discontinuation of mass production. Pay attention to modern versions of security systems.

is a car alarm with the ability to control...

Page 3

Image
Text

Sсher-Khan logicar 1

PURPOSE Scher-Khan logicar 1

System SCHER-KHAN LOGICAR 1

is an automobile

alarm with the ability to control via radio channel via

key fob communicator with liquid crystal display. System

exchanges information between the key fob communicator and

processor unit at a distance of up to 1,000 m. IN SCHER-KHAN LOGICAR 1

there is a function to automatically start the engine upon commands

key fob or internal timer. Car alarm is designed

for use on petrol or diesel vehicles with the system

fuel injection and on-board voltage 12 V, with mechanical or

automatic transmission. Protection of the processor unit, sensor

shock, call sensor, antenna unit is made according to the IP-40 standard and

Provides for installation inside the car. Siren made according to

IP-65 standard and can be installed in the engine compartment, away from

exhaust manifold and high-voltage systems.

content

PURPOSE OF SCHER-KHAN LOGICAR 1. ……………………………………………………………….. 3

DELIVERY SET …………………………………………………………………………………… 5

Additional components SCHER-KHAN LOGICAR 1. ……………………….. 6

LIST OF FUNCTIONS ……………………………………………………………………………………… 6

Functions of the key fob communicator……………………………………………………….. 6

Functions of the processor unit……………………………………………………………… 7

TECHNICAL SPECIFICATIONS …………………………………………………………………. 8

Types of alarm signals…………………………………………………………………………………. 8

Control methods…………………………………………………………………………………8

Protection of electrical circuits………………………………………………………………. 8

Spheres of protection………………………………………………………………………………….. 9

Other parameters…………………………………………………………………………………. 9

Batteries…………………………………………………………………………………. 9

DESCRIPTION OF KEY RINGS…………………………………………………………………………………………. 10

Symbols on the display of the key fob communicator ………………………………………… 10

Correspondence of the buttons of the main and additional key fobs…………….. 11

Purpose of key fob communicator buttons …………………………………………. 12

Setting up the key fob communicator. ………………………………………………………. 13

Turning on the display backlight……………………………………………………………….. 14

Keypad lock…………………………………………………………………………………………. 14

Possible faults

Problems typical for this car alarm model:

The key fob does not perform its functions and does not send commands. The cause of the problem may be low batteries, mechanical failure of the device, or a software malfunction. If the power supply fails, the battery must be replaced. If the problem is the negative impact of moisture on the device, but the key fob must be disassembled and dried so that there are no traces of water left on its board. If the remote control is damaged, its internal components are replaced by resoldering.
The wires through which the alarm is connected are damaged. With long-term use of the security system, wear of the conductors is possible, in particular if they are laid next to moving elements and components. To find a damaged cable, you need to use a multimeter. After replacing the wires, it is recommended to wrap them with electrical tape to provide them with additional protection from wear and tear.
One of the elements of the security complex has failed. We are talking about a transceiver module, a sensitivity controller, and a microprocessor unit. A detailed check of each device will be required; first of all, it is necessary to ensure the integrity of the contacts through which they are connected. If the control unit fails as a result of exposure to moisture, then its housing must be disassembled and dried by disconnecting its parts. Software malfunctions of the microprocessor can be resolved by flashing, which is best left to specialists.
False alarms have appeared, the alarm is activated for no reason. This problem is usually caused by the sensitivity of the kick controller being set incorrectly. To eliminate the malfunction, this operating parameter must be reduced by adjusting the sensor. It is not recommended to set the sensitivity value to minimum.

Operating Guide Power Saving Mode Battery…

Page 4

Image
Text

Manual

Battery Save Mode…………………………………………… 14

Driving a second car……………………………………………………….. 14

Indication of the presence of a feedback signal ………………………………………….. 15

SYSTEM OPERATION…………………………………………………….. 15

Arming ………………………………………………………………………………………………. 15

Arming with the engine running…………………………………… 17

Arming in Pit-Stop mode …………………………………………………………… 19

Automatic arming …………………………………………. 22

Alarm mode………………………………………………………………………………….. 23

Reminder mode……………………………………………………………………………….. 24

Disarming…………………………………………………………………………………….. 24

Automatic return to security mode………………………………………………. 26

Searching for a car………………………………………………………………………………….. 27

Opening the trunk ……………………………………………………………………………… 27

Checking the condition…………………………………………………………………………………. 28

Panic mode or JackStop™……………………………………………………………….. 29

Turning off the siren signals……………………………………………………………….. 30

Valet mode……………………………………………………………………………………………………………. 31

Turning the shock sensor on and off…………………………………………….. 33

Central locking control by turning the ignition on/off

or by tachometer signal………………………………………………………. 35

“Turbo” mode………………………………………………………………………………………… 35

Additional channel 1 control ………………………………………………… 39

Additional channel 2 control ………………………………………………… 41

Control of additional channels 3, 4, 5 ……………………………………… 42

Remote engine start………………………………………………………….. 43

Automatic engine start backup mode…………………… 45

Diagnosis of the causes of unsuccessful automatic engine start……. 48

Setting a timer to automatically start the engine …………………… 48

Limitation of the number of automatic starts………………………………………………………50

Disarming the system without a key fob and using a personal code ..... 50

Disarming the system without a key fob using PIN……………….. 51

Engine blocking ………………………………………………………………………………………. 53

Additional lighting when arming and disarming ……………. 53

Protecting the radio channel from code interception…………………………………………………………….. 53

Adjusting the sensitivity of the shock sensor……………………………………….. 53

Advantages and disadvantages of Scher-Khan Logicar A and Magicar A

Advantages
Logicar A	Magicar A
Price-quality ratio	Third class signal encryption
Basic feature set	The best solution in its price category
Signal interception radius	Long service life (36 months)
Ease of use	Wide temperature range
Easy to install
Flaws
Poor signal reception in shielded rooms	Frequent false alarms due to violation of installation technology
Remote opening of the trunk lid from a distance of 1.5 - 2.0 meters	Difficult to install for non-professionals
"Glitchy" key fob in cold weather	Different prices in regions

Programming the tachometer signal………………..

Page 5

Image
Text

Sсher-Khan logicar 1

Programming the tachometer signal……………………………………… 54

KEY FOB PROGRAMMING ………………………………………………………. 54

PROGRAMMING FUNCTIONS USING THE KEY FOB ………………… 55

Menu of programmable functions No. 1 ………………………………………………….. 56

Detailed description of programmable functions of menu No. 1 …………………. 59

Setting all programmable functions of menu No. 1 to factory defaults

values …………………………………………………………………………………………………………… 66

Menu of programmable functions No. 2 ………………………………………………….. 66

Setting all programmable functions of menu No. 2 to factory defaults

values …………………………………………………………………………………………………………… 69

contents of delivery

When purchasing a system, make sure that it is included. Specified

The scope of delivery is basic and can be expanded to include

according to the buyer's wishes with additional components.

Name

quantity

Operating manual………………………………………………………………………………… 1

Installation Guide………………………………………………………………………………… 1

System installation and configuration diagram……………………………………………………1

Processing unit SCHER-KHAN LOGICAR 1 ……………………………………….. 1

Keychain communicator………………………………………………………………………………………………. 1

Additional key fob………………………………………………………………………………….. 1

18-pin power connector with cable

and five CN 1 fuses (white CN 1 connector) ……………………………. 1

12-pin low current connector with cable

(black CN 2 connector) ……………………………………………………………………………………….. 1

LED (VALET) with cable (3-pin white connector CN 3) …………………… 1

Shock sensor with cable (4-pin red connector CN 4)……………….. 1

4-pin additional sensor wiring harness

(green CN 5 connector) ………………………………………………………………………………………………. 1

Antenna module with cable (6-pin blue connector CN 6) ……………. 1

2-pin power connector for integrated motor lock with

wires (matching connector CN 7 comes out of the block on wires)………… 1

Locking relay with block……………………………………………………………….. 1

Hood/trunk limit sensor (brown wire without connector) .... 1

Functions

Alarm system Sherkhan Logicar 4 with auto start has the following functionality:

Two-way communication. The system regularly sends messages to the user about the vehicle's condition. Two-way channels are used to transmit signals. Data is protected by conversational coding, which prevents information from being intercepted by attackers.
Integration into digital vehicle tires. The components are used to control the electronic parts of the car. The use of a CAN bus allows minimizing interference with standard wiring.
Slave mode. To control the anti-theft complex, a standard key fob is used. Protective mode can be activated when the engine is running. Arming is carried out by command or at a time specified by the user.
Automatic engine start. This function allows you to warm up and start the engine at any time convenient for the user. The system evaluates the condition of the starter, taking into account the tachometer readings.
Several types of security. According to the user manual, the driver can turn on the alert mode with or without sound signals. Protection can be activated by entering a code.
Engine operation control. This is done by reading the data transmitted by the tachometer. The power unit can automatically start at a specified time.
Self-diagnosis. The head unit is equipped with a special program that evaluates the condition of the main components of the anti-theft system. To check, the processor module is connected to the computer using a USB cable.
Assessing the condition of the interior. The user can adjust the time when the backlight is turned on and off, and remotely control the windows and trunk.

Advantages and disadvantages

The positive qualities of the Shere Khan Logicar 4 car alarm include the following characteristics:

the presence of auto engine start (the function works correctly on all cars);
ease of installation and configuration (the operating instructions for the 4i contain detailed recommendations with which any driver can correctly install the system);
compact dimensions (the head unit can be placed in any part of the cabin).

The disadvantages include the following:

interruptions in the operation of key fobs (users have to press the buttons repeatedly for the system to accept the command);
small range of action (correct sending of commands is possible at a distance of no more than 100 m);
the possibility of hacking (despite the coding characteristics declared by the manufacturer, attackers can intercept the signal and disable the system);
unreasonably inflated cost (at a relatively high price, the operation of the signaling system is not effective enough).

Description of key fobs

Page 10

Image
Text

Manual

attention!

Use only high-quality batteries. Usage

poor quality batteries can lead not only to

shortening the service life of the key fob, but also damaging it.

DESCRIPTION OF KEY FOCKS

PREPARING THE KEY FOB-COMMUNICATOR FOR OPERATION

Before using the key fob, remove the cover latch

battery compartment, press the cover and slide it to the side

opposite the antenna. Install the battery into the battery compartment,

observing the polarity indicated on the bottom of the battery compartment. Close and

secure the battery compartment cover. The keychain is ready for use.

symbols on the display of the key fob communicator

Indicator of operation of the key fob communicator transmitter and

presence of communication from the key fob to the processor unit Indicator of the presence of a feedback signal Low battery indicator

key fob communicator and Battery Save Mode

Time indicator, key fob battery voltage -

communicator and additional text information Valet mode indicator Security mode status indicator. Lock indicator and

unlocking locks in Valet mode Siren signal off indicator

Shock sensor disconnect indicator

Vibration call on indicator Automatic control on indicator

central locking for ignition alarm indicator

Comments

Need instructions for use
Eduard 06/16/2020 15:10 GMT

How to remove autostart Sherkhan Logicar 6i?

Masha 04/15/2021 19:19 GMT

How to remove autostart Sherkhan Logicar 6i

04/15/2021 19:25 GMT

Select → I found instructions for my car alarm here! #manualza

Click →

Who smoked the anti-smoking instruction?

Manualza!manualza.ru

Still not with us?

Problems and their solutions

A car alarm is a complex electronic device, the abnormal operation of which can only be corrected by a specialist. After carefully studying the Sherkhan Logicar A manual, the user should not have any problems using it. It is necessary to monitor the charge of the battery in the car and the battery in the communicator.

Alarm system Tomahawk 434 MHz Frequency autostart instructions
Sherkhan Logicar autostart
How to turn on the timer on Shere Khan 5
The most reliable diesel engines for passenger cars

How to install

The installation instructions suggest following the following sequence of actions during installation:

It is prohibited to place the head unit behind the dashboard; install the unit in the engine compartment.
Glue the antenna module onto the tape. The device is located on the glass at a distance of at least 50 mm from metal parts.
Mount the LED indicator with the adjustment button on the lower edge of the glass.
The siren is located in the engine compartment, which ensures increased operating volume. The unit is located at a distance from heated or moving structural elements.
Install the hood and trunk lid position sensors.
Place an impact force detection sensor in the passenger compartment. The device body is placed openly, which allows you to set the first and second sensitivity zones during adjustment.
If an additional sensor is used in the design of the complex, then the element is placed in accordance with the manufacturer’s recommendations.
After installing the Sherkhan alarm, you will lay the patch cables yourself. The cords are laid under decorative linings; it is prohibited to bend the routes at right angles and to press the insulators against sharp edges.

Connection diagram

The installer must connect the equipment using standard wiring harnesses. To connect to the central unit, plastic connectors are used, equipped with a rubber seal and a latch. The connection diagram of the 18-pin plug provides for connection to the on-board network, siren and outputs of additional channels. The automatic start unit and the central locking control module are connected separately. The documentation contains an electrical wiring diagram that explains the connection of components and fuses.

Logicar 1 functionality

The main function of the alarm is to ensure the safety of the machine.

The system is equipped with the ability to start a car engine from a distance, the features of which are as follows:

the use of this option is allowed on cars with manual transmission and automatic transmission, as well as on cars equipped with an ignition with a Start/Stop button;
This option can be used on vehicles with engines powered by diesel fuel or gasoline;
you can adjust the start time of the internal combustion engine;
the option can be implemented in a time interval every two, four or eight hours;
You can start the internal combustion engine remotely by sending a command from the communicator.

Separately, we should talk about the functions of a pager with a screen:

as confirmation of completed or unexecuted options, a message is sent to the pager from the central module;
if you have a second car, then the pager can be linked to its alarm system, of course, when Sherkhan Logicar 1 is used on it;
the pager screen displays the operating time of the internal combustion engine when the Turbo mode, Pit Stop function or remote start is activated;
the communicator displays a two-way signal indication;
the screen displays the temperature level in the car interior;
the communicator can inform the car owner about changes in the voltage of the car's electrical network, the diagnostic command is sent from the pager;
the key fob allows you to determine the charge level in the gadget’s power source;
vibration alert option;
The energy saving mode will prevent rapid discharge of the power source in the key fob.

Anton Kovalev showed how the Logicar model works on Renault Duster.

Technical properties

Properties of car alarm Logicar 1:

the “signaling” uses Magic Code PRO 2 technology, which allows for protection against signal interception;
the operating range of the remote control with the control device is up to 1500 meters in alert mode and up to 500 meters when sending commands;
if the communicator is lost, the procedure for disabling the security mode can be carried out using a special password;
another code can be used to gradually disable the protection mode;
the turbocharged mode can be configured so that during its operation the cooling time of the engine turbine changes.

The Auto Project video shows how to hack the Sherkhan anti-theft system.