Car alarms Scher-Khan Magicar 5 and Logicar 5i.


Scher-Khan Magicar 5 is a basic model of a security system with an automatic start function and a communication range of up to 1500 meters. Given the limited range of options, it is not advisable to install Magikar version 5 on a premium segment car.

The manufacturer's official website indicates that the model has been discontinued from mass production. There is no exact date, but according to auto shop managers, no more than 2 - 3 years ago.

Despite the end of the release, customer advisory support via the hotline remains valid. For questions about security system repair, you can contact certified technical centers.

Scher-Khan Logicar 5i is a car alarm with feedback function and optional auto start.

The main difference from Magikar version 5:

  • relevance, serial production;
  • presence of built-in digital buses CAN and K-LINE;
  • key fob equipped with a TFT display;
  • third class digital signal encryption algorithm using MAGIC CODE PRO 3 technology.

Characteristics, reviews, malfunctions

Scher-Khan Magicar 5 is a basic model of a security system with an automatic start function and a communication range of up to 1500 meters.
Given the limited range of options, it is not advisable to install Magikar version 5 on a premium segment car. The manufacturer's official website indicates that the model has been discontinued from mass production. There is no exact date, but according to auto shop managers, no more than 2 - 3 years ago.

Despite the end of the release, customer advisory support via the hotline remains valid. For questions about security system repair, you can contact certified technical centers.

Scher-Khan Logicar 5i is a car alarm with feedback function and optional auto start.

The main difference from Magikar version 5:

  • relevance, serial production;
  • presence of built-in digital buses CAN and K-LINE;
  • key fob equipped with a TFT display;
  • third class digital signal encryption algorithm using MAGIC CODE PRO 3 technology.

Auto engine start

The system assumes automatic engine start. This is necessary primarily to maintain certain parameters of the car, as well as to warm it up when it is parked.

Automatic start can be regulated either by sensors or by a user-set timer.

Autostart based on temperature and battery voltage

Automatic starting of the engine can occur on a timer or based on the readings of temperature and voltage sensors.

In this way, the number of starts is controlled by a timer depending on the temperature in the cabin or the voltage level of the car battery. This is configured using the key fob.

The temperature threshold can take one of the following values: -15, -25, +60 degrees Celsius. The limitation according to the voltage level can take only one value - 11.5 Volts. Thus, it is possible to adjust the timer activation depending on the current parameters of the sensors. This allows you to regulate the temperature of the cabin, as well as maintain the operating voltage in the battery.

Autorun by timer

You need to set the remote autostart of the system using a timer in this way: press buttons 2 and 4 simultaneously. It is also with their help that the start time is set.

When the timer is turned on, the TIMER indicator on the display lights up, and engine operation is regulated according to the time specified by the user.

Four different engine starting modes are possible according to a preset timer:

  • daily at a given time;
  • periodically, every eight hours;
  • every four hours;
  • every two hours.

Periodic activation is used to control the temperature in the cabin (heating or cooling the space).

Only one mode can be installed; they are not intended to be combined. Setting a different behavior model automatically disables the previous one.

Switching the engine on and off according to the timer is accompanied by sound signals and light indication. The display flashes five times.

The exact automatic start time must be specified only when turned on daily. In all other modes, the report starts from the moment the function is enabled.

Characteristics of Scher-Khan Logicar 5i and Magicar 5

Scher-Khan Magicar 5Scher-Khan Logicar 5iDescription
YesNoAdditional disarm code
from -45°С to +65°Сfrom -40°С to +70°СTemperature
3 months / 2 years 2 months / 2 years Service life of batteries in the main / additional key fob
YesProtection against scanning and digital signal interception
25mA20 - 22 mACurrent consumption value
YesSound and vibration mode for receiving an alarm message
30 sec.Alarm duration
Using a key fob, service buttonManage standard options
YesNoAvailability of internal memory for data storage
Up to 1500 metersCommunication range with key fob/module
YesSeparate mechanical signal activation/deactivation buttons
YesBlocking the connection of additional key fobs
YesAutomatic arming if the doors are not opened
YesHidden alarm transmission mode (only to key fob)
Yes (from the back of the card)Individual code if the key is lost
YesActive motor protection
YesAudible door open reminder
YesPanic Mode
YesFree hands
YesActive Dimensions Reminder
YesVALET
Remote start
Delayed launch
Temperature display
Battery charge indicator
Power Saving Mode
Yes (three modes)Interior lighting deactivation delay

For a complete list of general characteristics, read the article: “Comparison of the functionality of the Scher-Khan Magicar 4 and Logicar 4 car alarms. Customer reviews.”

Taking into account that the model of the Sherkhan Magikar 5 security system has been discontinued from mass production, it is not advisable to consider it as an accessory for installation.

Automatic start of security system

It is possible to automatically turn on the car security system. It can be programmed using the key fob.

In this case, the system is switched to security mode 30 seconds after all doors are locked. In this case, a corresponding indication and siren are issued. For another thirty seconds, you can still open the trunk or car doors. If this is done, the automatic switch-on countdown is delayed for another half a minute.

If this function is enabled, the PASSIVE indicator will be displayed on the key fob display.

Advantages and disadvantages of Scher-Khan Logicar 5i and Magicar 5

Service and Installation Brochure1 copy1 copy
Connection diagram1 copy1 copy
Microprocessor1 PC.1 PC.
LCD communicator1 PC.1 PC.
Spare communicator without display and feedback function1 PC.1 PC.
Electrical wiring, terminals, connectors6 pcs.6 pcs.
Protection sensors2 pcs.2 pcs.
Shock sensors2 pcs.2 pcs.
Signal transmitter1 PC.1 PC.
Module with built-in antennaNo1 PC.
Powertrain lock relay1 PC.2 pcs.
End cap1 PC.1 PC.
Siren1 PC.1 PC.
Metal bracket1 PC.1 PC.
LED to indicate active status1 PC.1 PC.
PriceFrom 12000From 8000 – 8400
Advantages
Logicar 5iMagicar 5
Possibility of remote autostart from key fobThe set of options out of the box is sufficient for everyday use of the security system
Low maintenance, relative ease of installationInstallation of additional equipment to expand functionality
Small size, compact module, relayPower saving mode to save battery
Necessary consumables are included in the basic packageIntuitive interface
A good alternative solution in its price categoryRelative ease of installation
Flaws
In shielded rooms, the signal capture range of the key fob does not exceed 70 - 80 metersUnstable operation of the anti-theft device if installed incorrectly
Activation/deactivation of the security system occurs with a short delay during prolonged use of the key fob in the coldThe key fob body is made of low quality polymer. After a short period of use, abrasions, scratches, and cracks are visible.
Insufficient protection against digital signal interception by third-party devices. In newer versions the algorithm is implemented better Digital sensors do not work correctly in high humidity
The batteries on the main key fob last for 2 – 3 monthsThe siren sound warning is weak. Hard to hear at long distances

Some installation recommendations

Among ordinary people from among retired intellectuals, students with eyes sparkling with enthusiasm, or simply home-grown Lefties, there will always be those who will be interested in mastering the difficult but interesting profession of a security alarm installer. The profession is profitable, but also quite dangerous.

They might find some tips useful:

  1. install the processor unit inside the cabin;
  2. it could be behind the dashboard;
  3. or under it;
  4. don't install it;
  5. in the engine compartment of the car. The processor unit is not sealed;
  6. on various electrical devices and wires. Interference may occur.
  7. secure with plastic ties;
  8. teach the block the year of the key fob;
  9. It is better to install the antenna unit at the top of the windshield (approximately 50 mm from metal parts);
  10. carry out installation in warm weather, cleaning the installation site with alcohol;
  11. Hidden installation of the antenna is also possible, but in this case the communication range may be lost;
  12. the call sensor can be placed in any of the lower corners of the windshield;
  13. It is better to install the siren in the engine compartment, with the bell facing down. Away from hot equipment and moving parts.

Possible alarm malfunctions of Sherkhan Magikar 5 and Logikar 5i

MalfunctionsPrevention / Elimination
Sherkhan Magikar 5, Logikar 5i
Software malfunctionsReflashing the electronic unit by a service center employee
Damage to the electrical circuitTesting the circuit with a multimeter, replacing the damaged area
Door end deformationReplacing the limit switch with a new one
Signal transmission by key fob with some delayInsufficient battery charge, use a spare key fob as a replacement
Frequent false positivesCheck sensor contact, replace with new ones as necessary

Equipment

The Sherhan Magic Car 5 car alarm set includes the following components:

  • head unit with processor and relay units;
  • communicator with 2-way communication channel;
  • auxiliary console;
  • shock sensor;
  • driver call shock sensor;
  • antenna unit with connecting harness;
  • temperature sensor;
  • separate relay with mounting block;
  • siren and additional limit switch;
  • a set of power cables with connectors;
  • installation and configuration instructions;
  • set of stickers.

Operating instructions for car alarms Sherkhan Logikar 5i and Magikar 5

  1. General information.
  2. Manual.
  3. List of standard functions.
  4. Technical parameters of components.
  5. Key fob programming.
  6. Algorithms for arming, activation, deactivation.
  7. Channel management.
  8. Remote activation, deactivation.
  9. Self-programming of the key fob.
  10. Basic safety measures when installing an alarm system.

Conclusion

Of the types of security systems under consideration, Sherkhan Logicar 5i has a clear preference. This is a universal alarm system for installation on passenger cars and trucks. Wide range of options out of the box, reliability, good price-quality ratio.

The relevance of Sherkhan Magikar 5 and previous versions has been lost due to the obsolescence of the models. According to their technical characteristics, they are not capable of protecting against third-party connections or interception of pulses.

Refinement method in the version with automatic transmission

It turns out that the alarm of the specified model can determine whether neutral is currently on. An indirect method is used:

  1. If the loop is in contact, but the engine is stopped, it is considered that neutral is on;
  2. If the loop is broken, the car is “in gear” in any case (so the processor thinks).

The loop discussed here is always cut when installing on cars with automatic transmission. Well, the owner, having moved the selector to the “N” position, will have to turn on program neutral. This method of operation is not suitable for everyone. But the car alarm circuit in question can be slightly modified in order to save yourself from all the inconvenience without compromising safety.


Installing a reed switch on an automatic transmission

Read the following manual carefully.

To carry out modifications, you do not have to disassemble the signaling housing. It is enough to do the following:

  1. We break the loop, solder the wires from it to the contacts of the reed switch;
  2. We attach a magnet to the automatic transmission selector rod;
  3. The reed switch must be installed so that it closes when the handle is in the “N” or “P” position (but not in others).

The meaning is clear: as soon as the neutral is physically turned on, the loop will close. And then, when the engine turns off, the processor will make the appropriate output. And you can turn on autorun at any time when it is permissible, but without the need to use “software neutral”.


A cable is soldered to the loop wires

We wish you success.

Reviews of Sherkhan Logikar 5i and Magikar 5

Positive
1.Vitaly (avtozvuk.ua): This is the third year that Magikar 5 has been installed, there are no particular complaints. A simple signal.
2.Petrovich (rozetka.ua): for my Lada Granta Magikar 5 is more than enough, I put it in the garage at night.
3.Gennady (hotline.ru): I bought the 5th Magikar three years ago, now they are not manufactured. Good budget signal.
4.Vitaly Vladimirovich (avtozvuk.ua): Sherkhan Magikar 5 is a budget outdated security system, but is still used in the CIS.
5.Kostya (ugonavto.net): I won’t praise it, but it’s been working properly for 2.5 years.
6.Dmitry Nikolaevich (ugonavto.net): Magikar 5 was already installed at the time of purchasing the car, I didn’t change it, it works well.
7.Negative
8.Kirill (avtozvuk.ua): the secret police is outdated and discontinued from mass production. In comparison with analogues, it has a meager set of options.
9.Alexander Mikhailovich (ugonavto.net): Sherkhan Magikar 5 served me for 4 years, I bought Logikar 8, I will install it at the service center.
10.Dmitry (hotline.ru): weak protection against signal interception is the main drawback that does not suit me.
11.Petr Mikhailovich (ugonavto.net): dissatisfied with the operation of the alarm, periodic failures, false alarms.

Video - Alarm Overview

Hello. I bought a signaling system with az.

The circuit itself and pinout of our ignition switch.

The connection itself:
1. Red
- connect to the 7th contact from the ignition switch block (pink wire on the block)
2. Green
- connect to the 4th contact from the ignition switch block (blue-black wire on the block)
3. White - do not use 4. Purple - do not use 5. Black
- to any grounded part of the car
6. Yellow
- cut the red wire (pin 3 on the block) and screw it to the end of the red wire going to the car circuits.
We take the 5-pin relay block (input included in the kit), the yellow wire (30th contact of the relay block) we connect it with the yellow wire that comes from the alarm, you can solder it, the result is (yellow wire from the alarm + yellow wire from the relay + red wire from the ignition switch). The remaining wires are from the relay block. Green
(pin 85) - connect to the other end of the wire (red) from the block going to the ignition switch block.
Blue
(with dad) - we leave this wire, it will connect to connector CN4 (white) There are
yellow-white (87a)
and
yellow-black wires (87)
- alarm programming depends on these 2 wires, I used
87
( 2b yellow-black) connect to the same place as the green wire from this block. We get (green (pin 85) + yellow-black (pin 87) + red wire going into the ignition switch block. That is, we connect according to scheme 2b. Programmable function 2-7. More on that later.

We sorted out the CN1 connector.

Stage 2. Connector CN2 (blue).
1. Brown:
siren output (+).
2. Gray/white:
output to the electric trunk lock (-).
3. Gray:
NO relay contact (+).
4. Purple:
Output 2 for alarm.
5. Purple:
output 1 for alarm.
6. Red/White:
Alarm power supply.

Here you will need a diagram of the instrument panel, namely the red panel block. For connecting alarm contacts. Below is the pinout and colors of the wires that were needed

How to program a new key fob

To configure the new Sherkhan key fob without errors, you must follow the instructions exactly. First of all, it is worth installing batteries in the pager, having first removed the special compartment behind the cover. To remove the cover, you will need to slide the latch.

The new key fob is registered according to the following principle:

The ignition is activated three times and turned off by turning the key in the lock to the “Off” position

It is important for the driver to carry out these manipulations within 4 seconds. Otherwise, you will have to repeat the steps again. When the light indication works, you need to press button 1 on the key fob

The interval between pressing and blinking should not exceed 4 seconds. If the communicator is paired successfully, the signal lights will blink 2 times. The rest of the new key fobs are registered in exactly the same way. To exit the settings mode and save them, just do nothing for 4 seconds.

If an additional key fob is not registered

If attempts to program the key fob are unsuccessful, you need to check the device for faults, taking into account the following guide:

  1. Try to get into the salon using the main remote control.
  2. If the security system does not respond to commands from the main key fob, you need to use an additional one. If problems arise far from home, turn off the system using the emergency method, i.e. entering a secret code. When you return home, you need to check the alarm with a second remote control.
  3. If there is no response to the second pager, make sure the transceiver is working properly. Re-register the key fobs. If this does not solve the problem, contact a service center for help and carry out a comprehensive diagnosis.

Sherkhan key fobs with one-way communication standards are equipped with control diodes. Their performance can be determined by the presence of a light indication.

At home or in a workshop, the possibility of transmitting a signal is determined by a tuned radio receiver that receives waves in the range of 280-450 MHz. Depending on the intensity of the sound produced by the remote control, the current state of charge of the batteries is determined. The role of the antenna is performed by a loop of copper wire.

To check the device, you must:

  1. Place the keychain on the top.
  2. Press the button that produces a signal.
  3. Change the orientation of the key fob by rotating the variable capacitor handle. This will allow you to achieve high sound quality. If desired, the capacitor is equipped with a scale of operating frequencies, made using the example of a working device.

After checking the signal level, you can dismantle the device to check the condition of the keys and other operating elements. If visual defects are noticed, including loose legs or peeling, they will need to be re-soldered. Parts with mechanical damage are replaced with similar new ones.

Programming of Sherkhan 7 key fobs or new models is performed directly or using a code value. If the car has an ignition switch that interferes with free manipulation, you will need to install a switch in the ignition circuit. Having completed the programming procedure, the key fob is removed, and the removed wires are connected in standard mode.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]