Instructions and manual for Scher-Khan Magicar 9 in Russian

The signal reception range of the Scher-Khan Magicar 9 alarm system is 2000 meters, like most models produced in 2009.

The distance for operating the equipment within the city is more than enough. The reception quality is stable, screens and obstacles do not interfere.

Sherkhan Magikar 9 is designed for installation on vehicles equipped with a CAN bus.

Unfortunately, this model has been discontinued from mass production, but qualified support from dealership specialists is still ongoing. If you need preventive maintenance or repairs, you can always contact certified technical centers.

OPERATING MANUAL ALARM SYSTEM T...

Manual

• Image
• Text

MANAGEMENT

OPERATIONAL INSTRUCTIONS

VEHICLE ALARM SYSTEM (VTSTS)

SK-9 USER.indd 1

SK-9 USER.indd 1

11.01.2009 17:15:58

11.01.2009 17:15:58

Possible faults

What problems can a car owner encounter:

1. The engine does not start when the autostart function is turned on. Diagnostics will help you find out why this happens. First, check if the remote start feature is enabled. The option to start the internal combustion engine based on temperature may be activated. If the difference between the readings of the thermometer and the temperature sensor is at least one degree, the system will not start the engine.
2. The alarm doesn't work. If you cannot enable or disable the security mode, first of all the condition of the battery in the key fob is diagnosed. When the battery is dead, it must be replaced. You can tell when the battery is low by reducing the range of signal reception and transmission. Try to approach the car close to the side where the antenna adapter is installed and press the key fob button. If the “alarm” does not work, change the battery. When the battery is normal, you need to disassemble the key fob and assess its condition. If there are traces of moisture, the device must be dried, but it should not be left under prolonged exposure to high temperatures. You also need to check the condition of the transceiver. Practice shows that damage to the contacts on its connector or broken wires most often contribute to such problems.
3. The alarm goes off for no reason. This error may be due to incorrect operation of the control module or incorrect settings of the shock sensor. First, we recommend adjusting the sensitivity controller. Usually such problems are associated with it. Make sure the sensor is securely fixed in its installation location. If this is the case, then the control module is checked. It is necessary to diagnose its connectors and contacts. If the plug is oxidized, the contacts must be cleaned. We recommend dismantling the unit and disassembling it. When there are traces of moisture or damage on the module, the device must be repaired. Moisture must be carefully removed with a napkin. If liquid gets on the board, it is better to leave it for a while near a battery or other heat source.
4. The security mode does not turn off, the car engine is blocked and will not start. The reason should be sought in the control unit. Water could get on it, causing the device to malfunction.

For what reasons may the automatic start of the internal combustion engine not work:

• the engine has already started, the warning light will blink once, and the key fob display will display error code 01;
• the ignition in the car is activated, the hazard warning lights will blink twice, the fault code on the remote control is 02;
• The car door is not locked, error 03, the car's turning lights will blink three times;
• autostart will not be possible if the trunk door or hood is open, the warning light will blink four times, the fault code is 04;
• another reason - the car owner has not completed the start reservation procedure for a manual transmission, the turning lights will blink five times, the fault combination is 05;
• The handbrake lever is turned off, error code 06, the warning light will blink six times;
• remote start of the power unit will be impossible when the brake pedal is depressed, the key fob display will display fault code 07, the turning lights will blink seven times;
• if the reason lies in the engine itself (malfunction of the power unit or ignition system), then the error code on the remote control screen will be 08, and the turning lights will blink 8 times.

Independently performing any repair work related to the alarm system is only possible if the system’s warranty period has expired.

Purpose scher-khan magicar 9

Page 2

• Image
• Text

MANUAL

2

SCHER-KHAN MAGICAR 9

3

Vehicle alarm system STSTS SCHER-KHAN MAGICAR 9

(hereinafter referred to as the system) meets the mandatory requirements in the GOST R certification system for car security devices:

GOST R 41.97-99 (Uniform regulations concerning the official approval of vehicle alarm systems (VTS) and motor vehicles in relation to their alarm systems (VTS))

GOST R 50009-2000 (Electromagnetic compatibility of technical equipment. Security alarm equipment. Requirements and test methods)

Thank you for purchasing the SCHER-KHAN MAGICAR 9

.

Our company's constant research and development implements the most advanced ideas and serves to meet all the needs of the users of our systems.

System SCHER-KHAN MAGICAR 9

is a complex electronic equipment of a car. The safety of your life, health and traffic conditions, as well as the quality of operation of nearby electronic equipment and communications, depend on its functioning and correct installation. Entrust the installation of the system only to specialized service stations. During operation, periodically check the correct functioning of the system.

ATTENTION!

When purchasing, check that the warranty card is filled out correctly. The manufacturer and supplier of the system are not responsible for any failure to comply with the installation and operation manuals, as well as for errors made during installation.

If you encounter problems with the operation of the system, please immediately contact the service center for diagnostics or advice.

The manufacturer reserves the right to make changes to the system design in order to

improving consumer properties

PURPOSE OF SCHER-KHAN MAGICAR 9

System SCHER-KHAN MAGICAR 9

is a car alarm with the ability to be controlled via a radio channel using a key fob communicator with a liquid crystal display. The system exchanges information between the key fob communicator and the processor unit over a distance of up to 2,000 m. The system has automatic engine start functions. The system is designed to work on vehicles with an on-board voltage of 12 V and provides the ability to connect to the vehicle’s standard CAN data bus. The protection of the processor unit, shock sensor, call sensor, and antenna unit is made according to the IP-40 standard and is intended for installation inside the car. The siren is made according to the IP-65 standard and can be installed in the engine compartment, away from the exhaust manifold and high-voltage systems.

CONTENT

PURPOSE OF SCHER-KHAN MAGICAR 9 …………………………………………………………….. 3 DELIVERY SET …………………………………………………… …………………….. 5 Additional components SCHER-KHAN MAGICAR 9………………………….. 6 LIST OF FUNCTIONS ……………………………………………………… ……………………………….. 6 Functions of the key fob communicator……………………………………………………………. 6 Functions of the processor unit ……………………………………………………………….. 7 TECHNICAL PARAMETERS ……………………………………………………………… ……………………… 9 Types of alarm signals……………………………………………………………………… 9 Control methods……………… ……………………………………………………………….. 9 Protection of electrical circuits ……………………………………………………… ……………… 9 Spheres of protection ……………………………………………………………………………………….. 10 Other parameters ……… …………………………………………………………………………………………. 10 Batteries…………………………………………………………………………………. 10 DESCRIPTION OF KEY RINGS …………………………………………………………………………………………. 11 Preparing the key fob communicator for operation …………………………………….. 11 Symbols on the display of the key fob communicator ………………………………………… 11 Correspondence of buttons main and additional key fobs …………….. 13 Purpose of key fob communicator buttons …………………………………………. 13 Setting up the key fob communicator. ………………………………………………………. 15 Turning on the display backlight……………………………………………………………….. 17

SK-9 USER.indd 2-3

SK-9 USER.indd 2-3

11.01.2009 17:15:58

11.01.2009 17:15:58

Advantages and disadvantages

MANUAL …

Page 3

• Image
• Text

MANUAL

4

SCHER-KHAN MAGICAR 9

5

Parking timer function …………………………………………………………….. 18 Keypad lock ………………………………………………… ………………………. 18 Energy saving mode “Battery Save Mode” …………………………………………. 18 Control of a second car ……………………………………………………….. 19 Indication of the feedback signal level …………………………………………… …. 19 SYSTEM OPERATION ……………………………………………………….. 20 Arming ……………………………………………………… ………………………. 20 Arming with the engine running…………………………………… 21 Arming in the “Pit-Stop” mode ………………………………………………………… . 23 Automatic arming …………………………………………. 27 SLAVE mode ………………………………………………………………………………….. 27 Alarm mode ………………… ……………………………………………………………………………….. 28 Reminder mode ………………………………………………… …………………………….. 28 Disarming …………………………………………………………………………………. 29 Automatic return to security mode………………………………………………………………. 31 Hands-free function …………………………………………………………….. 32 Car search ………………………………… ………………………………………………………….. 34 Opening the trunk ………………………………………………………………………………………… ……… 34 Checking the condition ………………………………………………………………………………. 35 Calling the car owner……………………………………………………………….. 36 Panic mode or JackStop™…………………………… …………………………………….. 37 Turning off siren signals ……………………………………………………………….. 39 “Valet” mode ………………………………………………………………………………………….. 40 Turning the shock sensor on and off …………………… ………………………….. 42 Central locking control for turning the ignition on and off …………………………………………………………………………………………. 44 “Turbo” mode ………………………………………………………………………………………… 45 Control of additional channel 1 ……………… ………………………………… 49 Control of additional channel 2 …………………………………………………………… 50 Remote engine start ……………………… ………………………………….. 52 Reservation mode for automatic engine start ………………… 54 Diagnosis of the causes of unsuccessful automatic engine start ……. 56 Setting a timer for automatic engine start …………………… 58 Starting the engine by a signal from an external device ………………………………… 60 Limiting the number of automatic starts ………………………… ……………… 61

Limiting the number of timer starts based on temperature and battery voltage ………………………………………………………………………………….. 61 Disarming the system without a key fob and using a personal code ……….61 Disarming the system without a key fob using PIN 1 ……………… 62 Access to the car without a key fob using PIN 2 …………………….. 65 Warning about not switched off dimensions ………… ……………………………. 67 Starter or ignition blocking………………………………………………………. 67 Open door warning……………………………………………………… 68 Additional lighting when arming and disarming……………. 68 Protecting the radio channel from code interception ……………………………………………………….. 68 Adjusting the sensitivity of the shock sensor ……………………………………………………….. 69 Adjusting the sensitivity of the owner's call sensor ……………………… 69 Programming the tachometer signal ……………………………………………………… 69 PROGRAMMING KEY FOBS ……………………………………………………… …………………. 70 PROGRAMMING FUNCTIONS USING THE KEY FOB ………………… 71 Menu of programmable functions No. 1 ………………………………………………….. 72 Detailed description of programmable functions of menu No. 1 …… ……………. 76 Setting all programmable functions of menu No. 1 to factory values ​​…………………………………………………………………………………………………………………… 87 Menu programmable functions No. 2 ………………………………………………….. 88 Detailed description of programmable functions of menu No. 2 …………………. 91 Setting all programmable functions of menu No. 2 to factory values ​​………………………………………………………………………………………………. 107

CONTENTS OF DELIVERY

When purchasing a system, make sure that it is included. The specified delivery set is basic and can be supplemented in accordance with the buyer’s wishes with additional components.

Name

Quantity

Operating Instructions ………………………………………………………………………………….. 1 Installation Instructions ………………………………………… …………………………….. 1 Processing unit SCHER-KHAN MAGICAR 9…………………………………………. 1 Key fob communicator ……………………………………………………………………………… 1 Additional key fob ………………………………… …………………………………………………………. 1 Shock sensor with cable CN 6 ………………………………………………………………………………. 1

SK-9 USER.indd 4-5

SK-9 USER.indd 4-5

11.01.2009 17:15:58

11.01.2009 17:15:58

Specifications

What are the characteristics of Sherhan machine alarms:

• to protect against pulse interception, the manufacturer’s own Magic Code Pro 2 system is used;
• to confirm that the protective mode is disabled, an additional code is used;
• the range of the main key fob with the central module is up to two kilometers, but only if the area is open;
• it is possible to protect the system from unauthorized configuration of spare remote controls;
• The direction of the anti-theft system is two-way.

User L1DER showed how to hack the Sherkhan alarm system.

MANUAL …

Page 4

• Image
• Text

MANUAL

6

SCHER-KHAN MAGICAR 9

7

Car call sensor with CN 7 cable …………………………………………………….. 1 Antenna unit ……………………………………………………… ………………………………… 1 Temperature sensor………………………………………………………………………………… 1 Locking relay with block……………………………………………………………………. 1 Siren …………………………………………………………………………………………………………………….. 1 Hood/trunk limit sensor with wire ………………………………………………………… 1 6-pin power connector with cable and fuse CN 1 …………. 1 6-pin power connector with cable and fuses CN 2 ………… 1 6-pin power connector with cable and fuses CN 3 ………… 1 11-pin control connector CN 4 ………………………… ………………………… 1 6-wire cable for connecting the antenna unit CN 8 ………………………… 1 2-wire cable for connecting additional channels CN 9 ​​……………. 1 4-wire cable connecting to the CAN data bus CN 11 ………………….. 1 Call sensor sticker ………………………………………………………………………………… ………. 2 Sticker under the antenna unit …………………………………………………………… 1 Sticker on the glass ……………………………………………………… ………………………………………….. 2

Additional components SCHER-KHAN MAGICAR 9

Additional components are not included in the package and must be purchased separately.

• SCHER-KHAN MAGICAR 9 key fob communicator (with display)* • SCHER-KHAN MAGICAR 9 key fob (without display)* • SCHER-KHAN CM4 programmer • SCHER-KHAN BP-2 immobilizer bypass module • SCHER-KHAN BP immobilizer bypass module -3

*The processing unit can remember the codes of only three key fobs.

LIST OF FUNCTIONS

Functions of the key fob communicator

• Multifunctional, 4-button key fob communicator with liquid crystal display • Protection against interception of MAGIC CODE™ PRO code messages • Switching the security mode on and off using different buttons • Audiovisual confirmation of executed commands • Vibration call • Ultra-long-range communication with the processor unit (up to 2,000 m )

• Synchronization of readings of all key fobs recorded in the system memory • Indication of the feedback signal level • Ability to control a second car • Automatic display backlight • Indication of low battery of the key fob • Indication of the temperature in the car interior • Indication of the voltage of the car battery • Indication of the voltage of the key fob battery • Energy saving mode “Battery Save Mode” • Indication of the current time • Alarm function • Parking timer function • Indication of engine operating time in automatic mode • Programming the time for automatic engine start (accurate to the minute) • Sound and visual reminder mode when receiving an alarm

messages

• Locking the key fob keyboard • Operational programming of all system functions from the key fob • Economical power supply (one AAA element)

Functions of the processor unit

• Ability to connect to the vehicle’s CAN bus for reading and transmitting data • Ability to work in “Slave” mode (controlling the vehicle’s standard key fob) when connected to the CAN data bus • Automatic engine start for vehicles with automatic or manual transmission • Operation of the starting system as with gasoline and diesel engines • Engine start upon command from the key fob • Automatic engine start every 2, 4 or 8 hours • Automatic engine start at a predetermined time every 24 hours • Automatic engine start based on temperature, on-board voltage or command from an external device • Monitoring engine starting using signals from the generator, tachometer or on-board voltage

SK-9 USER.indd 6-7

SK-9 USER.indd 6-7

11.01.2009 17:15:58

11.01.2009 17:15:58

Video

The AvtoGSM channel showed how the Sherkhan Magikar 9 anti-theft complex functions after installation.

Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes (66.67%)

No (33.33%)

X

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate this article: ( 3 votes, average: 4.67 out of 5)

Discuss the article:

MANUAL …

Page 10

• Image
• Text

MANUAL

18

SCHER-KHAN MAGICAR 9

19

PARKING TIMER FUNCTION

To turn on the parking timer twice within 1 second. Briefly press button III of the key fob communicator. You will hear one short signal from the key fob, the parking timer will start counting down, and the current time readings on the display will be replaced by the parking timer readings with a frequency of 1 time every 3 seconds. To turn off the parking timer twice within 1 second. Briefly press button III of the key fob communicator. You will hear two short beeps from the key fob, and the parking timer will disappear from the display.

KEYBOARD LOCK [BUTTONS (III+IV)]

You can lock the key fob communicator's keypad if you want to prevent accidental key presses. To do this, briefly press the buttons (III+IV) of the key fob. You will hear one short beep from the key fob on the key fob display for 3 seconds. “Hold” will appear, the key fob buttons will be locked. To turn off the keypad lock, briefly press the key fob buttons (III+IV). You will hear two short beeps from the key fob and the key fob keypad will unlock.

ENERGY SAVING MODE “BATTERY SAVE MODE”

The “Battery Save Mode” is used to reduce the power consumption of the key fob communicator. In this mode, the key fob has a shorter range and provides feedback to the system only when arming and disarming with this key fob. The vibration alert function does not work in Battery Save Mode. The key fob communicator automatically switches to the “Battery Save Mode” mode when the battery discharge level is critical. Forced activation and deactivation of the “Battery Save Mode” mode is possible in the mode of programming the functions of the key fob communicator (see “Settings of the key fob communicator” on page 15). The mode is indicated by the blinking symbol

on the key fob display.

DRIVING A SECOND VEHICLE

The key fob communicator can be used to independently control a second car if it also has the SCHER-KHAN MAGICAR 9 system installed. To switch the key fob to control mode for a second car, press the key fob buttons (I+II) for 2 seconds. You will hear one short signal from the key fob, and the symbol will appear on the key fob display

. After this, you need to program the key fob code into

memory of the second system (see “PROGRAMMING KEY FOBS” on page 70). Now you can fully control the second car.

To return to the control mode of the first car, press the key fob buttons (I+II) for 2 seconds. You will hear two short beeps from the key fob, symbol

will disappear from the display, the key fob will switch to control mode for the first car.

INDICATION OF FEEDBACK SIGNAL LEVEL

The level of the feedback signal from the processor unit to the key fob is displayed on the key fob display with the symbol

. When the level decreases

feedback signal the number of elements of this symbol decreases

. If there is no feedback signal, the symbols and

disappear from the display.

Indicator readings

change only when a signal is received

feedback. You can check the presence and quality of communication between the processor unit and the key fob by pressing button IV of the key fob communicator.

SK-9 USER.indd 18-19

SK-9 USER.indd 18-19

11.01.2009 17:16:00

11.01.2009 17:16:00

Comments

Select → I found instructions for my car alarm here! #manualza

• Click →

The owner of Ikea sold his soul to the devil, but he could not assemble it according to the instructions.

Manualza!manualza.ru

Still not with us?

Main functions

Signaling options:

1. Possibility of turning on the protective mode when the engine is running.
2. “Turbo” option, designed to maintain the operation of the power unit in the range from one to four minutes.
3. The “Hands Free” option is designed to automatically activate and deactivate the protective mode.
4. Availability of “Panic” and “JackStop” functions. Used in case of danger or when necessary to draw attention to the vehicle through sound and light signals.
5. The Pit Stop function provides additional comfort during short stops. The car owner can arm the car with the power unit running without a key in the lock.
6. “Slave” mode. Its presence allows you to use the standard machine control panel to configure certain options.
7. Hidden security function. When activated, if the “alarm” is triggered, the pulse will be transmitted to the main control panel. The siren will not be activated.
8. Possibility of remote start of the machine motor with indication of the time of its operation. The time interval can be adjusted down to seconds.
9. Option for remote engine start using a timer; this option can be activated on vehicles with automatic and manual transmission.
10. There is an option to start the engine by command from the remote control, temperature, or as a result of the battery charge dropping to a limit below 11.5 Volts.
11. Availability of a personal code to gain access to the car interior if the key is lost.
12. There is a delay function for turning off the lights in the car interior; up to three modes can be configured.

Activating autorun from the remote control

You can configure the engine to start using the following instructions.

1. On the key fob with auto start, press key 2 for two seconds. The car will be armed and the engine will start.
2. The switch screen will display a “smoke” symbol and an engine operation timer. Therefore, the first thing you need to do is adjust the duration of its warm-up.
3. Enter the menu by pressing buttons 1 and 4 simultaneously. The engine can be started according to the following scheme: work 5 minutes - button 1, 15 minutes. – 2.25 min. – 3.45 min. - 4.
4. Stop the motor - long press key 2.

Trying to program the alarm

According to the instructions, there are two tables of customizable options. It will be easy to access each of them. The programming itself is easy to perform using both the main and additional key fobs:

Entering the programming mode is done as follows:

1. Press the 1+4 or 2+4 keys for 2 seconds (select the first or second table);
2. Short presses on button 4 select the option number;
3. After the signal sounds, select a value by pressing the corresponding key (from 1 to 4).

What both tables look like is shown below.

Let's immediately look at the table of service options:

In addition to everything discussed above, during installation you can choose which version of the CAN program is installed in the ECU:

The choice is made by installing jumpers. A table with car models, where the corresponding numbers are indicated, is printed on the body of the main module.

Full instructions are here https://yadi.sk/i/Qb1RjmszGwN3hA