Jaguar EZ-alpha: Instructions and manual in Russian

Attention!

This product is not available for installation, try choosing something from the current offers:
Jaguar EZ-alpha car alarm is a security system with two-way communication. It is controlled by a key fob communicator with an LCD display in a rubberized case that reduces slipping and protects it in the event of a fall. Allows you to arm a car with a running engine and control up to 5 zones in a protected facility. The anti-theft properties of the system are enhanced by two engine locks and an immobilizer function

This review will talk about how to use a signaling device called Jaguar TEZ B. Its other name is Jaguar EZ B or simply EZ Beta. Despite the large number of names, the EZ B alarm is simple to use. Of course, all connections and basic settings must already be completed. And here we look at how to operate the system, including if it is equipped with autostart. Enjoy reading.

This security system...

Page 6

Image
Text

This security system (car alarm) is a complex electronic device.

Installation, connection and configuration of the car alarm are described in detail in the “Installation Instructions” and can be carried out by the consumer in full independently.

However, the manufacturer strongly recommends that you entrust the implementation of the specified complex

works certified according to GOST R 51709-2001 (OKUN 017613) service center, which specializes

is planned for the installation of alarms and/or additional electronic equipment in cars

niya, (hereinafter referred to as a certified service center).

The car alarm is intended for permanent installation on a vehicle with power

tion from its on-board 12 V DC voltage, the negative pole of the battery is connected to the vehicle ground.

Before installing a car alarm on a car, first connect all the wires to it in test mode, make sure that all connections are made correctly, connect power from the battery

battery and make sure the car alarm is working properly.

If installing a car alarm requires drilling holes or any other modification to the factory

parts of the car, be sure to first consult about the correctness of such

intervention in the design at the nearest dealer.

Never install the car alarm central unit where it will become very hot, for example from direct sunlight or hot air coming from the system

car heating. Also avoid places where the central unit of the car alarm and its components

The components will be subjected to strong vibration or become exposed to dust or dirt.

Use only the fasteners included with the car alarm installation kit.

In this case, the installation will be reliable and safe. The use of parts not included in the car alarm installation kit may lead to disruption of its normal operation.

When washing a car, it is unacceptable for water and detergents to get on the surface or inside the central unit of the car alarm, on its components (siren, sensors, antenna module, limit switches), as this can lead to damage to the car alarm. To ensure moisture

To ensure safety, it is advisable to initially install car alarm components in places inaccessible to the flow of liquids and splashes, and if necessary, take precautions during washing

or cover (wrap) the components with readily available household waterproof material, such as

polyethylene film, etc.

Never insert any objects into the central unit of the car alarm or its components to avoid damage to the electronic units and systems.

In the event of a suspected breakdown, do not try to open the body of the car alarm (its components) yourself, and please avoid entrusting diagnostics and/or repairs to incompetent persons.

persons. If the car alarm is faulty, contact a certified service center.

Cleaning. Do not attempt to clean the key fob or other car alarm components with

any aggressive liquids, solvents or chemicals, as this may cause

deterioration of its appearance. For cleaning, use a clean, dry cotton cloth (soft

forge a brush).

Due to the constant work to improve car alarm systems, increasing its reliability and

improving performance characteristics, minor changes can be made to the design

changes not reflected in these Instructions.

RULES FOR THE SAFE USE OF CAR ALARMS

JAGUAR EZ-a “Instructions for use and installation of the system”

Differences between “EZ” series alarms

When buying a car, you should worry about its protection and safety. The Jaguar car alarm will help the car owner with this.

It has already established itself as one of the most reliable car alarms. In addition, it is one of the leaders in the security systems market.

About the manufacturer

Jaguar was founded in 1922 in Britain. The company produces cars of various capacities and branded products - car alarms, clothing, accessories.

This brand appeared in Russia in 2006 and has established itself as a very reliable vehicle, and car alarms from this company have become one of the most popular on the Russian market.

Jaguar car alarm reviews: pros and cons

The advantages of this car alarm are the following:

great functionality;
relatively low price;
availability of additional functions;
Beautiful design;
the presence of several security zones.

TRANSMITTER SYSTEM Buttons…

Page 9

Image
Text

FUNCTIONS OF SYSTEM TRANSMITTER FOBS

Buttons 3 + 1

♦ Selecting the key fob alert mode (press and release the buttons and

Buttons 3 + 2

♦ Quickly set the key fob timer (press and release the * and P buttons simultaneously)

PURPOSE OF THE BUTTONS OF THE ADDITIONAL (SINGLE-SIDED) KEY FOB

Button 1

♦ Turn on/off security with confirmation sounds (press and

let go)

Button 2

♦ Arm/disarm with long siren signals

Button 3

♦ Unlocking the trunk (press and hold for 3 seconds)

Button 4

♦ Silent security on/off (press and release) ♦ Channel 2 (press and hold for 3 seconds)

Buttons 1+3

♦ Disabling the sensor by levels (press and release the buttons and

Buttons 1+4

♦ Valet service mode (press and release buttons and N)()

Buttons 3+4

♦ Anti-robbery mode (with the

ignition, simultaneously press and release the Mi and N){) buttons ♦ Recording a key fob in programming mode

PROGRAMMING BUTTON I OF THE KEY FOB TRANSMITTER WITH TWO-WAY COMMUNICATION

Purpose of the button

double-sided key fob is programmable and can be changed by the owner himself

car an unlimited number of times.

Note: For ease of use of the alarm system, it is recommended to program this
button to turn the security mode on/off.
Programming is carried out in the following order:

1. Quickly press the key fob button two or more times to move the cursor clockwise or

counterclock-wise. To change the direction of cursor movement, take a short pause (1-2 seconds) between pressing button 3 of the key fob.

2. By pressing the key fob button, set the cursor to the position corresponding to the desired command

(for example, the command to turn on / off the security mode with sound signals 'chZU)

3. Press the ^Ф^ button of the key fob and hold it pressed for 6 seconds until 2 appears, and then

3 more beeps.

4. Press the button

key fob to activate the selected function.

In the future, when using the alarm, briefly press the button

key fob will lead to

execution of the command assigned to it (turning on and off the security mode). At the moment of pressing

button, the icon corresponding to the programmed function will light up.

JAGUAR EZ-a “Instructions for use and installation of the system”

Specifications

The Jaguar Tez-B alarm system has the following technical characteristics:

the frequency of the radio channel used to transmit and receive data is 433.9 MHz;
the distance at which commands are sent stable is 600 m;
the range of action of the main key fob when receiving messages is 1.2 km;
type of microprocessor device power source - vehicle on-board network with a voltage of 12 V;
the amount of current consumed by the system in security mode is 25 mA;
number of key fobs attached to the head unit - 4;
moisture protection class - IP54;
operating temperature range - -40…+85°С;
main pager battery type - AAA batteries;
data encoding method is dynamic;
The battery life in the main key fob is 4 months, in the additional one – up to 2 years.

Equipment

The anti-theft kit includes the following elements:

processor unit protected by a black plastic case;
main key fob with 3 buttons, LCD display and two-way communication;
a spare communicator with 4 buttons and an LED element (the design of the device does not imply the presence of a display);
instructions for installing and configuring alarms;
transceiver module with adapter, owner call button and air temperature sensor;
shock and body position change sensor with cables for connection to the processor unit;
siren with bracket for fixing;
LED indicator of the anti-theft complex status (with cable and connection block);
Emergency shutdown key for protective mode with installation wire;
toggle switch to enable the “Anti-robbery” option;
limit switch for trunk or hood;
installation cables with connectors;
information stickers;
warranty card.

How to install

The alarm installation process includes the following steps:

Installation of the head unit. This part of the system is located in the cabin. It is necessary to choose places that are inaccessible to criminals. The housing is secured using double-sided adhesive tape or self-tapping screws.
Siren installation. The bracket is fixed in a free space in the engine compartment. The part must not come into contact with the cylinders or the intake valve. The siren is fixed on the bracket with the horn down. The wires are connected by soldering, bringing the connections into the interior.
Placement of the sensitivity sensor. The part is fixed to the partition separating the engine compartment from the passenger compartment. Do not place sensors on plastic or rubber surfaces. Controls must be accessible to the user.
Installing the antenna module. The transceiver is installed on the windshield. Before fixing the device, the surface is cleaned of dirt and degreased. The cables are pulled to the head unit under the interior trim.
Emergency button placement. The element requires hidden installation; it can be hidden in standard wiring harnesses. It is recommended to place a toggle switch near the service key to enable the “Anti-robbery” option.
Installation of limit switches. Parts are inserted into technological holes on the hood and doors. The cables are pulled towards the processor unit.
Connecting system components. The modules are connected to the main unit in accordance with the diagrams attached to the instructions.

Leave a review about the product

If you have experience purchasing and using a specific product, please share information about it with other AutoPulse.ru customers - leave your review.

Describe why you liked the product or, conversely, what problems you encountered when using this product.

Your review will be published some time after it has been verified by a moderator.

Attention! We do not publish:

reviews are too short and uninformative
reviews written in CAPITAL letters
reviews containing profanity
reviews not related to the consumer properties of a particular product
reviews containing links to other sites
product reviews that mention specific stores

Registration of Jaguar Tez B key fob

The firmware of the Jaguar Tez B transmitter is done as follows.

Disable vehicle protection mode and turn on the ignition.
Press and hold the service mode key until the siren sounds four times.
On the remote control, simultaneously hold down buttons A and B. If you are binding a communicator without a screen, use keys C and D. The siren will sound once.
Record the remaining alarm remote control switches in the system memory. The time interval between the binding of transmitters should not exceed five seconds.
Turn off the ignition. The turn signals will blink five times.

User manual

When using a car alarm with auto start, the meaning of the Jaguar Tez-B key fob buttons can be selected by the user. To do this, press key 3 and switch to cursor control mode. By pressing the same button, you select the function that will be performed when using the programmable element. After hovering the cursor, press key 3, holding it until a beep appears.

For Jaguar B alarm, the manual contains recommendations for automatic engine starting. The function can be activated using the cursor or button method. In the first case, select the appropriate indicator and press key B. Another method involves starting the motor by pressing a pre-configured button. If the action is performed correctly, 3 flashes of hazard lights will appear. If it is impossible to start, the system makes 3 attempts. If an error occurs, 4 beeps will sound.

Functions

The Jaguar alarm system has the following functionality:

notifying the owner when an alarm is triggered;
alarm mode (at the user’s command, light elements and a siren are activated, which helps scare away possible hijackers);
engine blocking (if an unauthorized start occurs, the engine stops after a few seconds, which prevents the thief from leaving the crime scene);
“Anti-robbery” mode (in the event of a robbery, the driver can block the power unit by switching a toggle switch located in the cabin);
saving user settings (if the power is cut off or components are removed, the system returns to its previous state the next time it is turned on);
security mode with the engine running;
resumption of protection in case of accidental shutdown;
car search mode (turning on the function causes a light indication to appear, allowing you to find a car in the dark);
automatic engine start at the owner’s command or selected parameters;
extending engine operating time.

Advantages and disadvantages

The Jaguar Tez-B alarm system has the following advantages:

a large number of useful functions;
several options for remote engine start;
increased range of the key fob;
presence of two-way communication;
affordable price.

The following points can be considered as the disadvantages of the security system in question:

difficulties in finding spare parts (the model is no longer produced);
poor build quality of the head unit;
quick failure of key fob buttons;
no additional limit switches;
dynamic coding, not resistant to hacking;
frequent loss of communication between the key fob and the processor unit.