How to reset the service interval indicator on a Skoda

The color of the indicator/symbol usually indicates how serious or dangerous the fault is. Blue and green simply indicate that the light is active, yellow indicates a minor fault or something that needs attention soon, and red or especially flashing red indicates a fault that requires immediate attention.

Here are the main indicators, symbols, meanings and corresponding actions for Fabia 1st generation 1999-2007, 2nd generation 2007-2013 (2014) and 3rd generation 2015 today - MPI, TSI and TDI versions.

Wrench icon

Displayed on the instrument cluster/MAXI DOT display when vehicle maintenance or inspection is required. If you service your Fabia yourself or have had it serviced at a dealership but have forgotten to reset the service interval reminder, read on to learn how to reset the reminder.

Danger and attention symbols (red and yellow exclamation marks)

New Skoda Fabia models use warning triangles with an exclamation point to indicate other symbols. If the indicator lights up and is accompanied by a red triangle, this indicates danger. This requires immediate action. This may be hazardous to the safety of passengers and/or may result in damage to the vehicle. A yellow triangle indicates a warning and requires attention as soon as possible.

Transmission fault indicator (red)

A gear with a red exclamation mark indicates a gearbox/gearbox fault and is only shown on the MAXI DOT display. If the icon is highlighted with a red warning triangle, you may find one of two warnings:

We reset the “Service” inscription on Skoda - Octavia Tour (A5) (A7) and Fabia cars

All Skoda cars have a so-called maintenance interval, which signals the owner about the need for vehicle maintenance, especially changing the engine oil.

Many motorists drive used Skodas or do not contact service centers to have their models repaired.

There is also a problem with resetting this service interval as it first tells you the number of kilometers left until service and after the countdown simply displays the word "Service" (in Octavia Tour) or other commands on different models.

To restore this signal command, an oil change will not be enough; several simple manipulations must be performed. Our instructions are shown using the Skoda Octavia Tour as an example and at the end you can see several videos showing how to restore the “Service” inscription on other Skoda models.

The procedure for restoring “service” on Octavia Tour:

We sit behind the wheel and insert the key into the ignition, but do not turn it on;
Press the right button to reset the daily mileage, hold it and turn on the ignition;
After turning on the ignition, do not release the button until the word “service” lights up (usually one or two seconds), then press the button;
Then go to the left button to set the clock (as shown in the photo) and turn it to the right (clockwise).
The maintenance interval has been reset;
We turn off the ignition, turn it on again and see that the annoying letter no longer appears until the next end of the interval programmed into the on-board computer.

Here are all the manipulations that allow you to independently restore service on your Skoda Octavia Tour. Similar simple steps are performed on other models, for example on the Octavia A5 or A7, on Fabia and so on. You can find it in the videos attached below, some are in foreign languages, but you can understand them just by looking at the manipulations.

Adjustment of maintenance period

You may need to reset your Skoda Fabia service interval if you service your car yourself or sometimes the technician forgets to do so. The procedure to reset Skoda Fabia reminder for Fabia Mk1 (1999-2007), Mk2 (2007-2014) and current generation Mk3 (2015-present) is described below).

Adjustment of maintenance period for Skoda Fabia Mk1

A wrench symbol appears on the instrument panel to indicate the interservice required. The mileage or day indicator decreases in 100 km or day increments until the service date is reached.

To reset the service interval reminder:

Finally, press the reset button again and the service reminder will be reset.
Close all car doors and make sure the ignition is turned off.
Press and hold the Skoda Fabia Mk1 service reset button located next to the speedometer.
Release the reset button and press it again until the “InSP” service indicator appears on the display.
Turn the reset button to the right until the “service _ _ _” indicator is displayed.
Turn on the ignition, but do not start the car.

Adjustment of maintenance period for Skoda Fabia Mk2

When an oil change is required, a wrench icon and 1 will be displayed on the instrument panel for approximately 10 seconds. A service time icon will be displayed along with the number of days and kilometers remaining until the next service. The number 2 is displayed when a check is required.

At the end of the service, approximately 20 seconds after turning on the ignition, a flashing wrench icon appears on the display along with the message OIL CHANGE.

To reset the Skoda Fabia Mk2 maintenance reminder:

Now press the view mode button.”
Close all car doors and make sure the ignition is turned off.
Press and hold the "0.0" button.
Release the "0.0" button.
Turn on the ignition.

that's all. The maintenance completion reminder will be deleted.

Adjustment of maintenance period for Skoda Fabia Mk3

To find out the next service date, press the 0.0 / SET button on the instrument panel. Your Skoda Fabia Mk3 will display a spanner icon on the dashboard with a message indicating the mileage or number of days until the next service.

To reset the service interval reminder:

Press the 0.0/SET button again.
Close all car doors and make sure the ignition is turned off.
Press and hold the 0,0/SET button.
Wait for the message “Reset Inspection Service. You are sure? "on the dashboard display.
Press the 0.0/SET button again.
Wait until the message “Oil Change Service Reset” appears on the instrument panel display.
Release the 0.0/SET button.
Release the 0.0/SET button.

that's all. The service pass reminder has been reset.

It is important that fault indicators, especially red ones, are not ignored as this could result in damage to the vehicle and risk to the driver and passenger. Warning lights may be accompanied by a message on the display MAXI DOT. If you are a Skoda Fabia owner, please tell us about resetting the service interval in the comments below this article.

Using the Scanner

Using a scan tool is the easiest way to reset your check engine light. Here are 5 simple steps:

Connect the scan tool to the OBD connector under the steering column. A laptop or tablet with the appropriate software is installed in the holder;
Then turn on the car’s ignition and turn on all the gadgets accordingly;
On your mobile device, in the appropriate section, press the “READ” button to view engine error codes. We write down the codes with a pen in the order in which they were received. This will be necessary for subsequent repairs.
We delete the error code. Press the “ERASE” button on the scanner. The Check Engine light will turn off when all error codes are cleared. Some scanning tools have many options, such as freeze frame, which captures the sensor readings. When deleting codes, these readings will also be deleted. Note: in some scanners, the option to clear codes may be automatic and the “CLEAR” or “YES” button instead of the “ERASE” button.
Be sure to turn the ignition on before clearing codes.

Battery disconnect method

Disconnecting the battery is an old way to reset the check engine light. Here are three steps to clear the check using this method: Step 1: Disconnect the cables from the battery. At this point, you should use a wrench to unscrew the positive and negative cables.

Step 2: Discharge the remaining electricity. The next thing you should do is press and hold the car horn for about 30 seconds. This action will help drain the car battery.

Step 3: Wait and reconnect the battery.

After disconnecting the battery cables and draining the remaining electricity, all you have to do is wait about 15 minutes and then plug the battery back in. Error codes will be cleared.

(Note: This method may not work on some vehicles.) If after this procedure the “check” lights up again, this may mean that the problem is still much more serious.

Turning the ignition on and off

Similar to the second method, but without disconnecting the battery. You just need to turn the car's ignition on and off three times in a row, with an interval of a second at each step. Once you are done, start the car and check whether the indicator has reset or not.

Allow the check engine light to go off on its own.

Wait until the “check” goes out on its own. The simplest method because you don't have to do anything.

The computer system in most vehicles will automatically recheck for problems that may activate the error light. If it is a minor problem, it will automatically correct itself and the check will go off.

However, if the check light is still on after three days, you need to apply the methods mentioned above to reset it.

If this continues to happen despite the following reset procedures, you should take your vehicle to your nearest auto repair shop and have it diagnosed by a professional mechanic. Professional diagnostics use more sophisticated tools and can identify precise problems.

REMEMBER: You can always contact our car service center, where your car will be happy to receive professional technical assistance. You can also make an appointment with us for a scheduled technical inspection! Please familiarize yourself with our car repair and diagnostic services.

Source

How to reset an error on the Skoda Octavia on-board computer

Like	To favorites	What do you think of this entry?
excellent 100.0%	interesting 0.0%	normal 0.0%	about nothing 0.0%	bad 0.0%

To reset the error on the Skoda Octavia on-board computer, you need to press and hold the daily mileage reset button and at the same time turn on the ignition. After an error appears on the computer display that needs to be reset, release the reset button.

Next, you need to rotate the time adjustment knob on the dashboard until the message disappears and “ —- “ appears on the trip odometer display.

MMZ engine what is it

After this, you need to press the mileage reset button again. “INSP” should now appear on the display. Turn the time knob until “INSP” disappears and “ —- “ appears on the display. The last step is to turn on the ignition.

846
records
188 633
viewing
readers

Top records

How to reset maintenance

If the car is not being repaired by an official dealer, we are not afraid to void the warranty and the MOT indicator flashes before your eyes; you can remove the “Service” sign yourself.

The operating instructions say “It is not recommended to reset the maintenance manually, as this will not lead to its adjustment and, as a result, other disturbances in the operation of the vehicle systems are possible.” (WITH)

When the battery is disconnected, the service indicator data is saved.

So, step by step how to get rid of the maintenance warning on Skoda without washi:

1. Turn off the ignition. 2. Press the mode selector knob (where the clock is set) and hold it for 5 seconds. 3. Turn on the ignition. 4. Release the reset button, and immediately turn it to the right. 5. Let's look at the display: the Service inscription is no longer there. On a machine with a flexible service interval, it discharges through the maxidot.

How to do this, wrote Vladimir, a codemaker and blog visitor.

1. Ignition is on. Everything is done with buttons on the steering wheel.

2. Enter the main menu.

3. Select Settings - send.

4. Scroll almost to the end, find point A - enter.

5. Select the “Reset” item and accept.

How to restore the word “Service” on a 2009 Skoda A5 with the usual buttons was shared by Vitaly on the wiper lever.

- go to the computer, - put a tick in the service information, - and takes off the stand.

He didn’t make his own video, everything is simple, even in words. However, for those who are comfortable seeing the visual process, I found 2 videos: ours and the bourgeois one.

In real life, when the time comes for the next maintenance, when you turn on the ignition, the key lights up for 10 seconds. It also indicates how many kilometers and days are left before the inspection. The information display shows: Service via . km or . days Remaining mileage indicator in km or remaining days inverse countdown to service period in 100 km increments or after 1 day.

When the service day arrives, the key symbol and the word Service flash on the display for approximately 20 seconds. The information display lights up: Service now! (Maintenance required!) To see how much is left until the next maintenance in days and kilometers, press the same regulator. The wrench symbol and the remaining distance will appear on the display for 10 seconds. At the same time, an indicator of the remaining days until the next service appears.

Resetting the Rapid oil change service indicator

There are several options for resetting values, depending on where you are on the Maxidot device panel.

Maxidot (Maxidot) is a type of bortovik. Located in the center of the dashboard between the tachometer and speedometer. To quickly find its presence or absence, see if the car icon is displayed (see Sketch); if so, it is there. Otherwise, you have an ordinary bortovik.

Bortovik Maxidot.

If your car does not have a Maxidot, then you need to do the same steps as for the 2nd generation Fabia.

How to reset the service interval on a Skoda Superb

The service indicator shows how many kilometers are left until the scheduled service. A wrench icon will appear on the screen. The display shows a message after how many kilometers or days maintenance is required. If this time has arrived, the key icon will flash for 20 seconds when turned on. The message “Support Now!” will appear on the screen.

It is not difficult to restore data on Skoda Superb cars starting from 2008. But first you need to understand the location of the buttons on the multifunction steering wheel. On the right is a wheel with which you select menu items. You will also need a switch in the lower left corner with an arrow image, it is used to go to the settings section. The interval is reset as follows:

Next, you need to click on the word “Reset” when the screen asks you to answer “Yes.”
Turn on the ignition.
Press the switch under the steering wheel down and wait for the main menu to open.
you need to select “Settings”, then go to section “A”.
The steering wheel switches will be used as arrows when navigating through menus.

Reset Skoda Yeti - Do-it-yourself car repair

Timely maintenance of the Skoda Yeti will not only ensure the maximum service life of your car, but will also make this process as safe and comfortable as possible. Maintenance is carried out in accordance with the regulations. It is very important to carry out this work on time, otherwise it may lead to undesirable consequences.

What is the maintenance of a Skoda Yeti car and when is it carried out?

Skoda service is carried out in accordance with the regulations provided by the manufacturer. Communication with the on-board computer is carried out through the diagnostic connector.

At the end of each type of Skoda Yeti service, the service counter is reset. This is necessary in order to track the remaining mileage until the next maintenance. Resetting the counter yourself before exceeding the maintenance will lead to violation of the rules and failure of the Skoda Yeti.

TO-1

It must be said that any type of repair work includes a list of operations performed in accordance with TO-1. That is, work on TO-1 is included in all other TOs.

THIS IS INTERESTING: How to change pads on a Kia Rio

The engine oil and filter need to be replaced. When changing engine oil, the filter must be changed without fail. Therefore, in the future, when it comes to the need to change the engine oil, this will also mean replacing the filter device. It is very important to change the engine oil during the first maintenance, since running in new parts leads to severe contamination of it with wear products. The fuel filter cannot be replaced.

you need to check the following points:

tire pressure and tread depth.
cabin filter element;
engine air filter (clean the housing if necessary);
brake pads;
spark plugs (clean if necessary);

Particular attention should be paid to the brake pads, since the effectiveness of the braking system and, as a consequence, the active safety of the Skoda Yeti directly depend on their condition. The pressure in all tires must be the same.

The pressure difference has a negative effect on handling. High pressure reduces the tire's cushioning efficiency, while low pressure causes the tread to wear out quickly.

Poor spark plugs will reduce engine power, and a dirty cabin filter element will impair the performance of the heater. I don't change the fuel filter.

Upon request, visual inspection of fasteners, airbags, paint and anti-corrosion coatings, and cleaning of gutters (if necessary) is possible. You can check the condition of the battery, engine leaks and brake fluid level. Using the diagnostic connector, you can scan the condition of the electronics. This will require special equipment. It is made under the steering column and located above the driver's left foot.

TO-2

This type of service involves creating the same list of works, but with some changes and additions. Recommended inspection and cleaning operations for Service-1 are mandatory for Service-2. It is also mandatory to check for errors in the electronic system through the diagnostic connector. To be replaced:

cabin filter.
engine oil;

To ensure excellent handling of your Skoda, as well as minimize tire wear, it is recommended to have your wheel alignment balanced and adjusted. Even if you haven't replaced your wheels, tire wear and slight deformation of the rim caused by shock loads will contribute to the imbalance.

Upon request the following can be performed:

checking the condition of lighting and lighting fixtures.
checking the antifreeze level (add fluid if necessary);
visual inspection of components and parts located in the engine compartment;
visual inspection of transmission elements for damage and leaks;
checking the tension of the drive belts (adjustment if necessary);
visual inspection of the exhaust system for damage;
checking the functionality of the windshield and headlight systems (if necessary, adding cleaning fluid);
monitoring the condition of the steering, tie rod ends;

TO-3

Fully complies with TO-1, with one exception: replacing the windshield wiper blades is also recommended. The engine oil is changed in the same way as TO-1. Checking the electronics fault history via the diagnostic connector is optional. I don't change the fuel filter.

List of necessary work related to technical maintenance

Skoda cars , also RS versions, require technical care regulated by the manufacturer. All components of the car are subject to this maintenance, including engines 1.4, 1.6 and 1.8 tsi models.

READ How to turn on the rear wiper on Skoda Octavia

The first maintenance interval is usually equal to 15,000 km. With such a mileage, the manufacturer regulates the replacement of engine oil and all filters, including air, oil and fuel. For Skoda Octavia Scout A5 and A7, also RS, this clearance also equals 15,000 km.

Skoda Octavia Tour A5, A7 RS have similar service regulations and work schedules.

Oil and filter changes are done at 15,000 km, reset is not provided.
The brake pads are replaced every 60,000 km; the reset is done using computer equipment.
Replacing the timing belt or chain is necessary at 90,000 km.
The brake water is changed once every two years.
The engine coolant must be changed every three years of vehicle operation.
On 1.8 engines, the fuel filter needs to be replaced every 30,000 km; this is an essential maintenance for RS engines.
You also need to undergo the service once a year, regardless of the distance traveled.

Typically, the service interval is reset by manipulating the keys on the dashboard.

A Skoda Octavia A5, RS, Scout dealer resets the service on the dashboard using computer equipment. Do not deliberately reset the system, this will have a negative impact on the warranty.

How to reset the service interval on a Skoda Yeti?

To reset the service interval on your Skoda Yeti, you need to do the following:

turn off the ignition by turning the key to the zero position and removing it from the lock;
press and hold the button to reset the interval;
press and hold the button for 5 seconds;
turn the key in the ignition;
only then release the key;

Sources

https://avto-prestig.ru/ekspluatatsiya/kak-sbrosit-servis-na-shkoda-fabiya.html
https://neauto.ru/kak-sbrosit-indikator-mezhservisnogo-intervala-na-skoda-fabia/
https://arhexport.ru/ekspluatatsiya/kak-sbrosit-indikator-mezhservisnogo-intervala-na-skoda-fabia.html
https://vdn-plus.ru/kak-sbrosit-schetchik-to-shkoda-fabiya/
https://lemzspb.ru/shkoda-fabiya-kak-obnulit-schetchik-to/
https://BotPage.ru/rost-i-uhod/snyat-servisnyj-interval.html
https://autogearspb.ru/diagnostika-i-obsluzhivanie/kak-sbrosit-schetchik-to-na-shkode-fabiya-2.html
https://avtograf70.ru/obsluzhivanie/kak-sbrosit-servis-na-shkoda-oktaviya.html
https://vianor14.ru/obsluzhivanie/kak-sbrosit-servis-na-shkoda-fabiya.html
https://mobile-dvr.ru/diagnostika-i-remont/kak-sbrosit-schetchik-to-na-shkode-fabiya-2.html