Popular question: How to Remove the Cigarette Lighter Kalina 2?

The cigarette lighter socket is rarely used by the owners of the practical Lada Kalina model for its intended purpose. Many people connect “charging” for mobile devices or other electrical consumers to this socket. Over time, the cigarette lighter becomes damaged and does not work.

Some Lada Kalina owners are disheartened by this “incident”, after which they furiously head to the service center to fix the problem. However, the breakdown is not quite as complicated as it might seem at first.

For repairs, the owner needs to stock up on the usual set of hexagons, as well as a screwdriver, pliers and a small soldering iron. And also study a small manual on how to remove the cigarette lighter, and then how to change it and fix the breakdown.

What are the reasons why the cigarette lighter does not work? How to repair it? Read about all this in our material.

How to change the Kalina cigarette lighter lamp

The heating element itself has additional lighting around the socket. The backlight sometimes burns out when the fuse trips. Therefore, it is necessary to replace the cigarette lighter bulb on Kalina. The order of procedures begins in a similar way.

1. Remove the contacts from the battery.
2. We get to the fuse block, where we take out number F20.
3. We unscrew all the screws holding the gearbox housing and lift it. It will be most convenient to put the box in 4th gear.
4. We hook the device by the green filter and pull it out along with it.
5. Turn it clockwise to disconnect the clamps.
6. We dismantle the metal base.
7. We take out the plastic green case.
8. We find a cartridge with a paw. We take it out and replace it with a new one.
9. We assemble in reverse order.

The video will help you replace the Kalina lamp.

Cigarette lighter repair

If the device on a Kalina car does not work, this is not always evidence of a breakdown of the part itself. Therefore, before replacing the cigarette lighter, it is necessary to check the most common locations of other faults. It is worth making sure that the appropriate fuse is intact or that there is constant contact with the ignition. These places should be checked before proceeding with replacement or full repair.

Frequent malfunctions

There are certain reasons why the Kalina device may not work. The most common of them.

1. Burnt fuse. The block with it is located under the front panel. We are interested in the fuse element number F20.
2. Broken filament.
3. Triggered fuse protection against overheating and fire.
4. Corroded contacts responsible for the terminals and ground connections.

We remove and change the Lada Granta fuses ourselves

If you are the owner of a Lada Granta car and you have problems with electrical equipment, then first of all you will need to check the fuses. In most cases, replacing one of the elements is enough.

If the fuse is intact, then it is likely that you will need to contact the services of a service station. Or, in order to save money and time, troubleshoot the problem yourself. Remember - the main thing in such situations is to slowly figure out what the problem is.

An electrical fuse or relay is a small device that is designed to protect the specific electrical circuit in which it is installed. In fact, all consumers of the Lada Grant are protected by fuses, not counting the battery charging circuit, generator and starter.

Car Lada Granta

Any Lada Granta circuit that is protected by a fuse is designed for the maximum current flowing through it. Taking this indicator into account, a safety element is installed. If a situation arises when one of the elements of the circuit fails and the current exceeds the design norm for this circuit, the conductive part in the fuse will burn out and the system will be de-energized. This is what guarantees the safety of the car's electrical wiring and prevents fire.

Where are the fuses for the Lada Grant?

The developers decided to place the main block with electrical fuses and relays in the Lada Granta to the left of the steering wheel, next to the light switches. This is a very good solution, the elements are located at hand and there is no need to remove any additional components. All work can be done without getting up from the seat.

Location of the compartment located in the cabin

The second power fuse block is located in the engine compartment next to the battery. It looks like an ordinary black box.

Location of the compartment located under the hood

Removal and replacement instructions

All car mechanics, without exception, recommend disconnecting the “-” terminal of the battery when working with the vehicle’s electrical equipment.

Replacing fuses on a Lada Granta car

The Lada Granta car has two mounting blocks: the first is located in the cabin and protects almost all electrical circuits of the car, except for the power ones; they are protected by the fuses of the power unit, which is located under the hood.

Let's consider replacing the fuses in the cabin unit.

Firstly, experts recommend disconnecting the negative terminal of the battery whenever tampering with the car’s electrical equipment. Then you need to remove the cover on the instrument panel, it is located near the headlight control unit. No special tools are required here, you just need to gently pull the upper left part of the cover with your hand and remove it from the latches one by one:

In the Norma and Luxury trim levels, below the headlight control unit there is a trunk opening button; when removing the cover, you need to carefully disconnect it from the plug:

To do this, simply grab the plug with your fingers and lightly pull it up. Of course, when reinstalling, do not forget to connect it back - the simplest mechanism will not allow you to reverse the polarity of the wires:

So, the cover is removed, you can proceed directly to replacing the fuses.

The mounting block looks like this:

On the back of the cover, as in the instruction manual, there is a diagram of the location of the fuses, the current rating and which circuit they protect:

Electrical circuits protected by fuses installed in the mounting block located on the instrument panel

Accordingly, we determine which fuse has failed, remove it, and if the thread is really burned out, replace it with a new one of the same current rating. This means that the problem of constantly blowing the same fuse is not recommended to be solved by installing a fuse with a higher rated current: such a fuse does not protect the circuit, and in the event of a short circuit, all the wiring and electrical appliances that it powers will burn out; a fire cannot be ruled out.

Let's look at the power fuse box. It is located under the hood:

Remove the cover by pulling it up. Determine which fuse has failed:

Electrical circuits protected by fuses installed in a mounting block located under the hood of the car

So, we looked at replacing fuses on the Lada Granta, but fuses may not always be the cause of electrical equipment failure. Before directly replacing the fuse, it is necessary to check the condition of the entire electrical circuit that was protected by the blown fuse, including the condition of the wiring and electrical appliances. Only after identifying and eliminating the cause of the problem, you need to change the fuse and continue operating the car.

One of the common reasons for the failure of fuse No. F20, which powers the cigarette lighter in particular, may be the use of non-standard plugs for a video recorder, radar detector and other electrical devices powered through the cigarette lighter, that is, it has a certain shape, and the plug for additional equipment can close the circuit at a certain position in the cigarette lighter socket. Thus, when purchasing such equipment, you need to pay attention to the plug; If you have already purchased a radar detector or video recorder and have problems with their operation, replace the plug.

Also, the cause of blowing of fuse No. F20, if the audio system is powered from it, as well as fuses No. F2 and No. F22, may be due to the ingress of water due to insufficient factory sealing of seams and technological holes in the doors and engine compartment. Experts recommend carefully studying the entire electrical circuit route to avoid subsequent malfunctions and taking appropriate measures.

Installing an additional cigarette lighter (12 V) in Kalina

This is a convenient device. It is often used to connect various chargers for mobile gadgets or laptops. There are even splitters with USB connectors. Therefore, installing an additional cigarette lighter is a popular procedure. Already now there are devices on the market with a standard socket input, but with an output for several connections.

The cost of such devices for Kalina is 1 – 1.5 thousand rubles. When replacing, you need to remember that you do not need to overload the car’s wiring by connecting several devices at once - the fuse will blow under increased load. Some “craftsmen” solve the problem differently. A more powerful fuse is placed, but this is dangerous due to wiring burnout and fire. Therefore, everything should be done according to the instructions.

Cigarette lighter splitter: types and connection

How to find and replace the cigarette lighter fuse? 2 possible locations for the part

Sometimes it becomes necessary to connect 2-3 devices to the cigarette lighter, which cannot be done without a splitter, and, given the design features, it is not always possible to connect even a telephone charger normally. Well, since Lada Kalina does not provide other alternatives, it is better to use this one.

The most common type of splitter has 3 sockets plus one USB port. By connecting an inverter (converter of on-board current to 220 V), you can easily charge devices such as an e-reader, tablet computer or laptop on the road. The price of the device in question ranges from 170 to 300 rubles. Buying a power strip is much cheaper and easier than replacing a cigarette lighter.

You can, of course, connect the necessary devices to the ignition without touching the cigarette lighter. But here you cannot do without the hands and knowledge of an experienced auto electrician, and installation will take more time. There will be a lot of extra wires and additional fuses will be needed. However, some car owners consider this method more reliable for Lada Kalina.

It is, of course, better to use an inverter with direct wiring. But without it, a high-quality splitter will be enough. The only question is to find a really high-quality device. The splitters are structurally similar to any extension cords used in everyday life for sockets. But there are differences between different models, which do not always have a good effect on both their operation and the condition of the Lada Kalina’s electrics. Cigarette lighter socket splitters can be divided into three types:

• those in which the block with sockets is made in a single housing with a central plug;
• those in which the plug and socket are connected by a flexible connection;
• connected via a power cord.

Plato personal account: login using login and password

“Platon” (short for “payment per ton”) is a system of collecting compensation for the movement of trucks on federal highways. The measure is mandatory and applies to heavy vehicles with a capacity of 12 tons or more. In simple terms, truck drivers must pay money to the treasury for damaging roads; this money goes towards repairing these roads. To make it convenient, owners of heavy trucks need a Plato personal account. We will explain in detail how to get it and why you need it in this article below.

Registration in your personal account

To register, the user will need a valid phone number and email. To start the procedure, you need to click the “Register” icon on the page lk.platon.ru

The system will prompt you to select your country of residence and type of client:

• individual
• individual entrepreneur
• legal organization

The package of documents required when filling out a personal application form will depend on the payer’s status.

By clicking the “Next” button, the user will be redirected to the “Vehicle Owner Data” section.

1) Individual When filling out a personal questionnaire, the Federal Law indicates the following information:

• last name and first name of the vehicle owner;
• TIN (indicated in the certificate of registration with the tax authorities);
• valid e-mail;
• contact number.

Simple folk method

Replacing and adjusting kingpins on an UAZ: detailed instructions for selection, repair and complete replacement.
Required

: screwdriver, awl, remove the negative terminal from the battery or pull out the cigarette lighter fuse.

1. Remove the metal cartridge by squeezing out the antennae with an awl.
2. Disconnect the connector with wires from the socket by pressing the latch.
3. Remove the illuminated plastic ring by squeezing the antennae.
4. Disconnect the connector with wires from the lamp socket.

For those who like to repair their car themselves, collections of technological instructions (for Granta and Kalina) will be useful.

Modern car enthusiasts rarely use this socket for its intended purpose. Additional devices such as phone chargers are connected to the cigarette lighter socket. However, over time the device breaks down.

If you have the necessary knowledge and tools, replacing the cigarette lighter on a Lada Kalina car is a simple procedure. For repairs you will only need a standard set of hexagons, a screwdriver, pliers and a soldering iron.

Read about why a malfunction occurs, how to identify it and replace the device, and why you should pay attention to the fuse.

Replacing the cigarette lighter on Kalina 1st or 2nd generation

The repair process is practically the same for these Lada models. It is also relevant for the Grant or Priora family. To replace the cigarette lighter with your own hands on Kalina 1st or 2nd generation, just follow the following procedure.

1. Open the hood, find the battery and disconnect the negative terminal from it. It is recommended to remove it, because the mass is powered through the car body. If you turn off the plus, it will touch the body.
2. We unscrew the three mounting bolts around the parking brake handle, which is located on top of the central tunnel. We dismantle the hand brake limit switch.
3. We unscrew the rear fastening screw and additional screws on the sides.
4. Remove the cover from the gear lever, and then lift the tunnel cover. Now you can remove the Kalina cigarette lighter itself.
5. We disconnect the power plug coming to the electrical wiring circuit.
6. We press the special latches that hold the cigarette lighter. After it pops out, it can be replaced.
7. We install a new part on the Lada Kalina. After replacement, we carry out the assembly process. We perform all steps in reverse order.

Lada Kalina relay location

The safety relays are located in the same block to the left of the driver's foot as the fuses. Below is a list for the main configurations of Kalina. In the case of the more expensive “Norma” and “Lux”, it is necessary to take into account that the difference between them is minimal, but it still exists and some of the relays are missing in the first.

Owners of Kalina with the ERA-GLONASS function will find the following relays in their mounting block:

Where is the starter relay located?

It is located in the mounting block along with the fuses. The latter is located to the left of the steering column and the position of the driver's feet. Its cover can be identified by the location of the headlight and instrument panel dimmers on it.

Fuel pump relay location

It is located among other electrical elements of this type in the mounting block. To get to it, you need to open the cover using a small flat-tip screwdriver and find the element numbered K12.

Fan relay location

Responsible for cooling the radiator and its serviceability must be checked if overheating is detected. In the standard configuration it is designated as K4, and in the luxury configuration it is also designated as K3. You can get to it in the same way as other similar elements - by opening the cover of the fuse box located on the left side of the center console and bringing it out using a ten key.

Turning relay location

Relay number K5, located on the diagram in its upper left part, is responsible for the turn. The element, like other relays, is placed in the fuse box located in the interior of the Lada Kalina.

Wiper relay location

The windshield wiper relay has the number K3 for standard Lada Kalina equipment and is located among other electrical elements in a special block, together with the electrical circuit fuses.

Power fuses

Where is and how to remove the cigarette lighter fuse for Lada Granta

1. Why doesn't the cigarette lighter work?
2. Fuse problem
3. Where is
4. Which one can I put in place?
5. Cigarette lighter repair
6. How to remove the cigarette lighter
7. Diagnostics
8. How to replace with a new one

If problems arise with the car cigarette lighter, first check the cigarette lighter fuses on the Grant. Burnt out parts are replaced with new ones, but before this the cause of their burnout is established.

Why doesn't the cigarette lighter work?

The cigarette lighter on a Lada Granta car may not work for various reasons. The most common faults are:

• blown cigarette lighter fuse;
• poor contact;
• broken wiring.

Replacing the socket in the Kalina cigarette lighter

The device may not work due to a faulty seat. You should replace the socket of a broken cigarette lighter on a Lada Kalina by following the same procedure.

1. Disconnect the terminals from the battery.
2. Remove the gearshift lever casing and the central tunnel cover by unscrewing the screws holding the decorative plastic.
3. Disconnect the contact chip and then remove the socket.
4. Replace the part with a new one.
5. Reassemble in reverse order.

Detailed step-by-step instructions are presented in the profile video.

Components of the Lada electrical network.

The Lada Kalina vehicle has three working groups responsible for the safety of the wiring: installation, main and additional. It is customary to place fuses in a certain group. Group arrangement of devices allows for greater security of the on-board network. In the event of a malfunction of one of the devices, the rest of the on-board network continues to operate without interruption.

Important! Before carrying out work, it is necessary to turn off the battery power to avoid injury. During diagnostics, strictly follow safety requirements when working with the vehicle’s on-board network.

The mounting block is located near the steering column. On a Lada Kalina car, the mounting block is located on the left side of the dashboard. In order to correctly diagnose the unit, it is necessary to analyze in detail the diagram provided by the manufacturer. The block diagram allows you to determine the dependence of a specific on-board network device on a specific fuse. Having identified the fuse responsible for the correct operation of a particular device, it is necessary to begin diagnostics. If during the inspection it was revealed that the fuse is faulty, it should be replaced with a new one.

The installation group is the most important part of the power supply to vehicle consumers. Among the devices for the correct operation of which the mounting block is responsible are the following: power mirrors, light and sound alarm signals, windshield wipers, dimensions, fog lights, low and high beams, security system controller and electric power steering (if equipped) .

In the main group there are fuses responsible for the electronic control system of the internal combustion engine. The main fuse group diagram includes the following elements: test connector, fuses - main relay, electric fuel pump relay and ECU fuse.

An additional group is located in the Lada Kalina car under the dashboard. For ease of work, you can unscrew the fasteners of the block and dismantle it. The additional group circuit includes the following components: electric cooling fan relay, electric fuel pump relay, electric cooling fan safety element and main relay.

Faulty Lada Kalina relays require replacement just like other network components. Relays and network safety devices should only be replaced after the causes of the malfunction have been identified. When replacing, it is necessary to use elements recommended by the Lada Kalina manufacturer. Since each component of a safety electrical network is designed to carry an optimal amount of current, the use of a foreign element can lead to malfunction of the electrical appliance.

The power supply unit of the Lada Kalina has a fairly simple and understandable design. If you have the appropriate diagram, any car enthusiast can handle servicing the power system. Replacing block elements is a simple but very important procedure. After all, the successful operation of all electrical devices in the car directly depends on the safety of the fuses. Timely replacement of the unit elements will restore the operation of the device and restore the safety of the machine’s on-board network.

Happy fuse replacement!

No car owner is insured against problems with the electrical equipment of his car. At least once such a problem can arise for anyone, even the most attentive car owner. Most likely, it is associated with the failure of the fuses.