How to remove saffron milk caps from a car body quickly at home

Hello, dear friends! Many motorists are naturally interested in the question of how to remove saffron milk caps from the car body. And under such a cheerful name as saffron milk caps or bugs hides an extremely serious problem in the form of rust. In fact, these are small pockets of corrosion that appear on the surface of the body.

Each car comes from the factory with a certain amount of anti-corrosion protection. For some it is better, for others it is worse. It is the task of the car owner himself to protect the car from corrosive processes. If saffron milk caps are left unattended, they will grow and actively spread further.

Therefore, true car enthusiasts are concerned with the question of how to get rid of them, whether this can be done with their own hands and at home. Actually it is possible. The main thing here is to take a responsible approach to completing the task.

Why do saffron milk caps appear?

These small, and sometimes not so small, rust spots are the result of destructive processes caused by the oxidation of metal surfaces.

A similar effect occurs due to the contact of 3 components. These include moisture, oxygen and static electricity. Corrosion usually forms in places where the protective layer of paint and varnish has been damaged. Having overcome these obstacles, the three horsemen of corrosion are left face to face with the bare and unprotected metal, reacting with it. Yes, rust does not appear in 5 minutes. This is a rather lengthy process. But if the damage is small or located in hard-to-reach places, the motorist simply will not notice its beginning and development, having already seen the result in the form of a red spot.

The rate at which the metal will degrade depends on several additional factors. These include the level of protection of the body metal, environmental conditions and contact of the damaged area with chemicals.

These factors have a direct bearing on the depth, shape and color of the rust.

One of the first signs that rust is attacking a car is the appearance of bubbling marks in the paintwork.

Rust spots

Regardless of the model, make and year of manufacture of the car, we can identify several main points and areas that are most often subject to the formation of saffron milk caps, bugs or simply traces of rust.

These include the following areas and zones.

Hood. Quite often it is necessary to remove saffron milk caps from the hood, since small stones, crushed stones and highly abrasive debris fly into it from the road;
Wheel arches and fenders. At least as often, bugs are removed from the wing and arches. It is also affected by stones and dirt, often flying from under your own wheels. If you install wider tires or wheels, the process will only speed up;
Thresholds. They are located as close as possible to the road, and therefore take the brunt of the impact of the environment.

It doesn’t matter what kind of car you have, Lada Kalina, VAZ 2114 or a brand new Mercedes. Every car is susceptible to corrosion to one degree or another.

Now you need to figure out how you can deal with saffron milk caps yourself correctly, and what you will need for this. Many people are scared by the price of such a service in a car service, which is quite normal.

Putty

So, we figured out the cleaning, choosing the method of removing the “fungus” from the body on our own. The photo below shows which surface should be prepared for the next step.

The resulting area must be washed to remove crumbs of old paint. The surface must be degreased with alcohol; it will quickly dry from the remaining drops of water. Bare metal can be coated with a binder, but this is not usually done. Immediately begin applying the mixture to the metal.

Putty can be prepared, but it is better to buy ready-made. It dries quickly after adding a sealer, so you need to apply the mixture quickly. Avoid creating excess material so you don't have to spend a lot of time cleaning. A smooth surface is achieved with a rubber spatula.

The putty will not be thick. Over time, it will crack due to body vibrations, and the finish paint will need to be redone. Heavily damaged areas are cut out with a grinder and fresh metal is welded.

Fighting methods

If you are thinking about fighting saffron milk caps on your own vehicle, you need to know about the existing options.

Essentially, all available methods are divided into 2 main categories.

Mechanical method. This is a set of special measures, the task of which is to clean damaged surfaces, perform priming, puttying and painting of the vehicle body;
Chemical method. Here we are talking about a slightly different approach. The method is based on special converters and kits aimed at treating damaged areas with anti-corrosion agents.

There is a lot of debate and talk regarding these two methods.

Some adhere exclusively to the mechanical method of processing. Others are sure that there is nothing better than chemical control of saffron milk caps.

In fact, both methods are really good. Moreover, each of them is relevant for certain situations. It is only important to understand which category your situation falls into.

Mechanical restoration methods are relevant in situations where corrosion has managed to penetrate quite deeply into the metal elements of the machine. That is, you will have to completely remove all traces, clean the surface and get to clean, intact metal. Here you will need the appropriate tools and devices;
Chemical options are best used when it is not possible to use the mechanical method. When the area is treated, the rust turns into foam. To remove it, just apply water pressure. Some products help the corrosion harden, after which the area can simply be covered with a layer of paint.

Before choosing one option or another, be sure to study the nature of the damage and its depth. Simple chemistry is not always enough to cope with the problem.

Practice clearly shows that in case of serious metal defects, the use of chemicals gives only a temporary effect, after which rust appears again. Therefore, the optimal solution would be to use a mechanical processing method.

Preparation for final painting

Next, we remove the “mushrooms” from the body. The body paint instructions state that residual rust is not acceptable. The cover is sure to explode next spring. After the putty has dried, the area to be treated is cleaned first with coarse and then fine sandpaper until a smooth surface is obtained.

When stroking there should be no scratches, dimples, or drops. When the paint falls off, even the smallest mistake will become noticeable. This creates a perfectly even base for the next stage - priming.

The primer is applied with a spray gun like paint. It penetrates deep into the layers of putty, creating a rough and durable base. This is necessary to prevent drops of paint from rolling off.

Inexpensive but effective disinfection of car air conditioning

Here it is important not to confuse the effective method and advice of a skilled master with a banal advertisement for another supposedly miraculous remedy. No one denies the fact that excellent rust converters exist, but sometimes outright bullshit is advertised, which is of no use at all. You should not rely on the magical properties of expensive auto chemicals with an unclear composition and promises to give the perfect result. It is better to give preference to the old proven method of the mechanical type. He is the one who shows himself at his best.

The method of removing saffron milk caps using the most common AA battery is also gaining popularity. I also heard about this method, but I don’t really trust it. You can experiment, but be careful.

If you have real experience of a non-standard approach to rust removal, be sure to write about it in the comments and tell us about your results. It is very interesting to find out first-hand how effective a battery really is in the fight against bugs and saffron milk caps.

We return to the mechanical method. He does not promise to do everything quickly, but focuses on quality.

You will need to take a set consisting of:

Inspection of defects and cleaning

Sometimes it can be difficult to notice minor corrosion. In order not to miss insidious stains, it is better to wash the car at a car wash with detergents.

Inspect the surface in daylight, preferably outside in sunny weather. Minor damage to the varnish can be immediately repaired with varnish, nail polish will do.

When deep rust forms, two methods are used:

Mechanical: wipe with a cloth, remove deep layers with sandpaper. A drill will do and will save your time.
Chemical - a special substance, a rust converter, is applied to the rusted area, the reaction residues are washed off with water.

Before removing the “mushrooms” from the body yourself, you should carefully evaluate whether all the necessary substances and conditions are present. After cleaning, the surface should be mirror-like, without brown spots.

Life hack: cleaning car seats cheaply and effectively

Bulgarians;
grinding machine;
sandpaper;
solvent;
rust converter;
primers with anti-corrosion effect;
paints to match the body color;
colorless varnish in a can;
two-component putty (with hardener).

You can roughly estimate how much such a set costs. And feel free to multiply it several times to get the cost of work at a car service center.

Step-by-step removal

In such a matter, it is important not to rush and not skip any of the required steps. Approach the task as responsibly as possible.

Step-by-step removal of rust traces and restoration of paintwork looks something like this:

First, the damaged areas are cleaned. A sandblaster, sander, grinder or regular sandpaper will do. But sandpaper is used in extreme cases, when there are no other options;
Carefully, consistently and gradually remove pockets of rust, avoiding strong temperature changes when working with power tools;
The treated surfaces are then coated with a converter to seal the result. Refer to the manufacturer's instructions;
Remove any remaining corrosion using a solvent. This will completely degrease and clean the surfaces;
A layer of putty is applied to level out any existing irregularities and depressions. A total of 2-3 layers are required;
When the putty has completely hardened, the surface is sanded and leveled;
The procedure ends with priming, applying paint and treating with colorless varnish.

If you do everything according to the instructions, be careful and take your time, the result will pleasantly surprise you. Otherwise, it’s easier to immediately contact a car service center.

Do-it-yourself chemical way to get rid of corrosion

The chemical method differs only in the initial stage - cleaning the part from rust. According to reviews from manufacturers, these substances are able to eradicate rust, stop its further spread and do not damage the iron itself (unlike “sandpaper”). Application is very simple - apply the product to the rusty surface for 30-40 minutes, then wipe with a cloth or rinse with water. But to get a nice, smooth surface you will still have to clean, putty and polish (except for the initial stages of corrosion).

Some funds are available to motorists even with the most modest budget

There are kits on sale that allow you to independently apply a protective layer of zinc to the car body. The kit already contains a solution for removing rust and applying a protective layer, as well as an electrode with a zinc tip. This process is electrochemical, so a connection to a battery is required.

The kit includes liquids and all necessary working tools

What is athermal glazing in a car: how does it work?

The best way to combat car body corrosion involves preventing its occurrence.

In practice there is nothing complicated about this. Yes, even the most active measures will not protect against rust. But prevention will significantly delay the formation of the first saffron milk caps, and will also reduce the volume of damaged areas to a minimum.

Painting

Before applying solutions, it is recommended to use tape and film to protect the good surface, glass and rubber bands. The coating must be removed immediately after leveling the putty and spraying the paint. However, at the time of the last operation, the strips are glued at some distance from the treated area. This is necessary for a smooth transition.

However, old paint will look different from new paint. Only experienced colorists can choose the exact color. The artist will not need less knowledge. It is important to spray the finished solution in several layers, without causing stains.

To get the perfect area that is visually indistinguishable from the old paint, use insulation. A similar convector with a reflector is used in medicine. The end of the effort is to treat your body with nail polish, which you can pick up at a car cosmetics store. The alternative is to apply new paint to the entire surface, which is much more expensive.

Remove rust at home. A thing for those who once purchased a car without anti-corrosion coating or with damaged body parts.

Rust does not sleep and always causes irreparable damage to the body, eating it, turning metal into dust, which is sometimes impossible to restore.

To prevent this from happening, it is necessary to declare a merciless war on rust when it is first detected. How to do this, what is needed for this, how to remove the fungus without spoiling the body? Here are a number of questions that we will now cover.

Modern anti-corrosion agents

The correct choice of high-quality automotive chemicals is a necessary condition for successful anti-corrosion treatment of the car body and thresholds. But choosing is not so easy - there are many anticorrosive agents on the market with different levels of effectiveness. How to make the right choice?

As already noted, it is better to remove rust with orthophosphoric acid, VSN-1 neutralizer, or a zinc kit. But for subsequent anti-corrosion protection of different body surfaces (external and internal), different chemicals are used.

External processing

Liquid plastic, PVC film based on rubber resins and combined bitumen mastic are optimal for treating external body surfaces. These are dense synthetic compounds that can withstand severe temperature changes, high levels of humidity and exposure to aggressive chemicals.

Among the best options, we recommend mastics from the brands Dinitrol, Liqui Moly, Body 930, Tectyl Bodysafe. They are applied in a layer of up to 4 mm, create an internal elastic layer and are capable of providing reliable protection of surfaces against rust for up to 18 months.

How to react to enamel peeling

Damage to the factory body coating (paint, enamel, anti-corrosive layer) requires immediate intervention. You cannot delay time if you notice an area of exposed metal. In such a place, a corrosion center will form in the shortest possible time, the localization and elimination of which will require a lot of costs, time and materials.

Sequence for removing rust from the bottom of a car:

elimination of peeling areas of paintwork;
removing rust from the bottom of the car;
degreasing damaged areas;
rust converter treatment;
puttying;
applying anticorrosive.

Adviсe

To avoid costly repairs, it is important to promptly clean the car arches from any rust stains that have appeared. To do this, it is necessary to use the most effective means and follow preventive measures.

Car owners are recommended to:

keep the vehicle clean;
park the car in a dry, ventilated garage;
cover the body with polishing compounds;
do not delay cleaning work from corrosion;
combine mechanical and chemical methods;
clean not only the front, but also the inside of the wing;
thoroughly dry each protective layer;
Rub the putty thoroughly to eliminate roughness.

To prevent the appearance of rust, it is useful to treat the undamaged surface of the arches (and the body as a whole) with special polishing agents. They create a thin film that prevents moisture and dirt from penetrating microcracks and paint chips.

Mastics based on:

bitumen,
rubber,
liquid plastic.

There is a lot of useful and important information about methods of fighting rust on a car in this section.

Fiberglass Repair of Rust Through Rust

The cheapest way to repair rotted arches, sills or other parts of the body kit, which allows you not to remove rust from the metal, but simply to disguise the through hole so that the part does not fall apart for some time. This is done using a factory repair kit for plastic bumpers, or separately - sheets of glass mat (glass mats) and epoxy putty (polyester resin).

Fiberglass body treatment

Stages of work:

Use masking tape to delimit the area around the damage.
Wipe the work area with a degreasing compound.
Apply putty (resin) evenly to the secure edges.
Cover with a sheet of glass mat adjusted to the shape.
Lubricate it with a layer of putty (resin), and stick another sheet on top.
Repeat until desired strength is achieved.

After polymerization, the surface is sanded, coated with primer, and, if necessary, tinted using conventional technology.

Removing rust with potent agents

There are chemicals for removing rust (rust remover or rust dissolver - rust remover or solvent). Rust remover removes rust using a strong, concentrated acid. This can be hydrochloric, oxalic, phosphoric (higher concentration than in the rust converter) or other acid.

Of course, rust removal is a better option than converting or sealing it, and is a concrete answer to the question “how to remove rust from a car?”, but this remedy has its own characteristics and disadvantages.

Features of rust remover:

Rust remover is most often used as a product that requires soaking a rusty part, so it is mainly used to remove corrosion on small parts. However, this product can also be used on large surfaces. For stationary parts with a large area, it is necessary to apply the product, then cover it with plastic film to prevent its evaporation

Hydrochloric acid and oxalic acid, as the main active ingredients of rust remover, are very toxic, so rust remover must be used with extreme caution. Strong acids have an adverse effect on metal, especially if the action is too long

After this action, the corrosion resistance of the metal is weakened.

Considering all the above features of rust removers, they are still used when removing rust on the body. An important point after using such a product is to wash off the acid and neutralize its residues.

Places where bugs and rust spots are more common (photo)

Thresholds

Arches

Wings at the arches

Trunk

Rust progresses well in places where there is increased exposure to foreign objects: sand, dirt, stones. The hood suffers from small stones from the tires of other cars, the wheel arches from their own “emissions” (by the way, wide non-standard tires or rims contribute to greater damage). The thresholds of the car are also one of the first to rot due to the close proximity to the “aggressive environment”, plus unsuccessful exits from curbs aggravate the situation.