How to set up Starline A64: main characteristics, advantages and disadvantages of the device

Author: Victor

The Starline A64 automotive security and telematics system is based on a dialogue signal encryption code, as well as a 128-channel narrowband transceiver. This allows the alarm to operate effectively even in conditions of extreme urban noise.

[Hide]

Technical characteristics of Starline A64

Description of the main technical characteristics of the Starline A64 car alarm:

• The carrier frequency level of the communication channel is 433-434 MHz;
• the maximum range of the pager when sending signals is 800 meters, when receiving them - up to 2 km;
• the operating radius of the spare communicator varies around 15 m;
• ability to control the protection system at ambient temperatures from -50 to +85 degrees;
• the impact controller belongs to the category of integral three-axis devices;
• The security system is powered from the on-board network with a voltage of 12 volts;
• AAA and CR2450 batteries are used for installation in pagers.

The “Unpacking Auto Products” channel spoke in detail about the technical properties and parameters of modern Starline A64 security systems.

Standard and programmable car alarm functions

Car alarms have many functions, the main ones of which include:

• The vehicle coordinates are determined thanks to the presence of a GPS-GLONASS telematics module.
• This device is protected from various code grabbers thanks to the presence of an interactive control code that has individual encryption keys.
• Despite the presence of a large amount of urban radio interference, the car alarm works perfectly. This provides a unique narrowband transceiver.
• The fastest possible response to the processes of jacking and evacuation of the vehicle is achieved thanks to the presence of a 3D shock and tilt sensor in the device.
• Full operation of the car alarm is ensured in the temperature range from -50 to +85 degrees. This is ensured by the high quality of the components of this device.
• The a64 car alarm is battery operated. Thanks to the record energy efficiency of this device, the battery charge can be maintained for 60 days.
• During the production of car alarms, patented advanced technologies and software solutions are used, which significantly improves the quality of its work.

Equipment

Overview of devices and elements included in the Starline A64 delivery set:

• service user manual for installation and configuration, which allows you to configure all functions;
• consumer reminder;
• warranty card;
• main microprocessor device in a black rectangular case;
• batteries for use in the main and additional remote controls;
• main and backup pagers;
• three relays equipped with blocks;
• a limit switch for installation on the hood, two self-tapping screws for fastening it, as well as a terminal clamp for connecting to grounding;
• transceiver module equipped with an antenna adapter;
• adapter for connecting additional controllers;
• LED light that allows you to determine the state of the security system;
• button to enter emergency control and maintenance mode;
• a set of wires with connectors for connecting an alarm system.

The siren and door limit switches are not included in the Starline A64 car alarm package; these devices must be purchased additionally.

Alarm equipment Starline A64

Key Features

Car alarm Starline A64 has expanded functionality:

1. Possibility of implementing automatic car engine start with additional connection of M21 or M31 modules. Enabling this option is possible on vehicles with a diesel or gasoline injection system, regardless of the type of gearbox. It can be configured automatically or can be started by the car owner’s command, which is sent from a pager.
2. Models of security systems Starline A64 Dialog and 2CAN allow you to determine the coordinates of a vehicle using GPS and GLONASS satellites. This feature is optional; for it to function, the owner of the signaling system must additionally install a GSM module (preferably from the manufacturer Starline). These models differ from each other in that the second has a digital CAN interface. It allows you to connect the protection system to the corresponding bus with minimal interference with the standard wiring.
3. Availability of a pre-heater control system. Diesel power units are equipped with such devices.
4. Possibility of automatically changing the position of the driver's seat. This option can only be turned on on cars that are equipped with an electronic control system. Additional flexible channels are used to control devices.
5. Function of automatic activation of low beam headlights when driving. The user can configure the operation of the optics when lowering the handbrake or when squeezing the brake pedal.
6. Ability to control the anti-theft system using a smartphone. This is allowed when installing an additional GSM module. Using the device, you can configure the transmission of information to the phone about the security status.
7. Low power consumption feature. The car battery can retain its charge for 60 days when the alarm is on.
8. The use of power switches (PS), the use of which allows for silent operation of the control module. This feature allows you to provide reliable protection of contacts from possible short circuits. SK is a proprietary development of the company that allows reducing the risk of fire hazard.
9. Slave mode. With its help, the car owner can control the anti-theft system using the remote control from the standard central locking system. The devices must first be synchronized.
10. Possibility of connecting additional controllers to protect the interior. This refers to volume and tilt sensors. The control unit has special connectors for their connection.
11. Blocking the power unit. For this purpose, special relays or digital devices can be used. The latter are connected additionally.
12. Activating security for a vehicle with the engine running. There is no need to leave the key in the ignition.
13. Anti-robbery option. Its essence is to block the engine if a robbery occurs on the car. In accordance with the readings of the brake sensors or at the command of the owner, the power unit will stop and the vehicle will not be able to continue moving. The stop is made after 30-60 seconds, during which time the car thieves usually leave the crime scene to a safe distance for the user.
14. Availability of an automatic monitoring system for the operation and condition of sensors. When faulty devices are detected, the microprocessor module disables them, sending a warning to the car owner.
15. Saving information in memory about triggered alarm modes with the ability to view them later.
16. The ability to remotely disable controllers and regulators when machine protection is turned on. Only the warning zones of the sensors can be deactivated.
17. The presence of two different sound modes of the pager, as well as a vibration alert option.
18. Blocking pager buttons.

The AutoAudioCenter channel spoke in detail about the functionality of the Starline A64 anti-theft systems in its video.

Starline A66 is the most reliable security system in its category

Among the models considered, the A66 alarm system has an undeniable advantage. Its functionality is much more extensive, and its security system is an order of magnitude higher than that of the A64 and, especially, the older A62. We can say that this system is a modernized version of previous versions, combining the reliability of Starline security and the latest developments in the field of automotive security systems.

Despite the fact that the A66 car alarm is an inexpensive option, the actual degree of protection it provides is not inferior to higher-class models. The system is equipped with a tilt controller, as well as a two-level shock sensor. If desired, the alarm functionality can be expanded by adding GPS and GSM devices. The automatic start function is carried out when installing security equipment connected via Can-bus.

Advantages and disadvantages

Advantages:

1. Reliable alarm operation in any conditions. This refers not only to the interference typical of large cities, but also to temperature changes.
2. Large actual operating range of pagers. Many manufacturers purposefully increase this figure, which in practice may be lower by 50% or more. In the case of Starline A64, the range in fact practically corresponds to that indicated by the developer.
3. Easy to install and connect. The instructions include detailed electrical diagrams with which the consumer can connect all the elements and contacts independently.
4. Great functionality at a relatively affordable price.
5. Shockproof pager housing. Thanks to this, the device will not fail if dropped or other physical impact.

Minuses:

1. The key fob wears out quickly despite the high strength of the case. According to user reviews, control keys on Starline A64 pagers become stuck over time, which will subsequently have to be repaired.
2. Difficulty setting up Slave mode. In addition, when using a standard communicator, the system may not function correctly.

Reviews from drivers using Starline A62, A64, A66 alarm systems

Reviews about the A62 alarm:

Reviews about the operation of the A64 alarm

How to install Starline A64?

The Starline A64 alarm system is installed as follows:

1. The control device is mounted secretly in the car interior and fixed using self-tapping screws or plastic clamps. For installation, you can choose the free space behind the glove box or instrument cluster. This unit is equipped with a temperature sensor and should not be placed near heat sources such as heating system blowers.
2. The transceiver module with antenna is placed away from metal products. The device is equipped with a tilt and shock controller, so installing the adapter on a plastic lining is not allowed. The manufacturer also does not recommend placing the device on the windshield if a tint film is applied to it.
3. The LED light bulb is fixed on the dashboard in the cabin.
4. The siren is placed under the hood of the car, in a place protected from external influences. If the device is equipped with a stand-alone battery, the user must provide access to its keyhole during installation. A 3 amp fuse must be installed on the connection wire.
5. The hood and all doors are equipped with limit switches. Installation of these devices is not allowed on drains. Laying of wires from the “limit switches” is carried out under the decorative cladding, all electrical circuits are extended to the processor device. When the hood and doors are locked, there should be no access to the switches.
6. If an additional GPS antenna is installed, then it must be connected to the five-pin X10 connector. The device is fixed using double-sided tape, and its body is placed horizontally. Before installing the module, it is recommended to check its functionality and communication quality in advance.
7. Any additional equipment, including modules, must be connected to the three-pin X4 connector on the processor device. The cable included in the delivery kit is used for connection.
8. A key to enter the “Valet” service mode is hidden in the interior.
9. When installing radio relay P2, you must immediately program this element. To do this, you need to select the appropriate blocking option in the pager settings and leave the programming menu. After this, connect the “GDN” contact of the device to the car body and, with the ignition off, press the “Valet” button 7 times. The key is turned to the “On” position and within five seconds the user must connect the black wire to the power line of the switch.

The “Avtozvuka Base” channel spoke in detail about the mistakes that can be made when independently installing the A64 security system on a car.

User manual

Before using the alarm, you must ensure that it is installed correctly. To do this, you should activate and deactivate the protection mode and check the operation of the door locks.

How to set up autorun?

Features of changing the parameters of the automatic engine start option using additional Starline M21 and M31 modules:

1. To activate the function, a message with the text “0066200000000” is sent to the phone number in the block; to disable it, “0066100000000” is sent.
2. Before setting the option, it is recommended to select the type of transmission installed on the vehicle. For vehicles with a manual transmission, the command “0066010000000” is transmitted, for vehicles with an automatic transmission - “0066020000000”.
3. The duration of cranking of the starter mechanism is adjusted by sending a message in a similar format. For 0.8 s - “00660001000000”, 1.2 s - “00660002000000”, 2 s - “00660003000000”, 6 seconds - “00660004000000”.
4. The operation of the vehicle's power unit can be monitored using readings from the generator unit or tachometer. In the first case, a command is sent with the text “00660000010000”, in the second - “00660000040000”.
5. The user can adjust the duration of the machine's engine operation after start. To set this parameter to 10, 20 or 30 minutes, messages “00660000000100”, “00660000000200” and “00660000000300” are transmitted respectively. If you want to remove time restrictions, you must send a command with the text “00660000000400”.
6. For vehicles equipped with a Start/Stop ignition system, the number of times the start button is pressed can be adjusted. To select one or two signals, messages “00660000001000” or “00660000002000” are transmitted, respectively.

CAN interface programming

Connecting and programming the CAN interface is necessary to control additional equipment in the car. This refers to electric mirrors, seat adjustment, power windows, sunroof. To connect devices you do not need to cut into the standard wiring, you just need to connect to the connector.

To enable the Starline A64 CAN bus, perform the following steps:

1. The power to the anti-theft system is turned off. If the CAN wire was connected to the control unit, then it must also be disconnected.
2. The service key is pressed. While holding it, the alarm siren will sound five times.
3. The button is released after the last sound pulse. Four more signals will indicate entering the digital interface setup mode.
4. Then you will need to enter your personal vehicle code. All car models that can work with the tire have unique four-digit numbers. They can be found directly in the service manual for the alarm or on the manufacturer’s official website.
5. Using the service button, you need to go to the first section of the settings menu; to do this, the key is “clicked” once. Then it is pressed the number of times corresponding to the first number of the car number. As confirmation, the siren will sound several times, this will happen two seconds after the sign is indicated.
6. In the same way, after the beep, the remaining characters are immediately entered. Once the last digit has been confirmed by the control unit, either two or four beeps will sound. In the first case, the car number was entered successfully, in the second - not.

Key fob control

Before using the Starline A64 pager with or without feedback, you must install batteries in the device. The batteries are inserted into a special compartment hidden behind the back cover of the remote control.

Designation of symbols and buttons on the key fob

Correspondence of keys on the main and additional pagers:

Control elements on the main and spare communicators Starline A64

Indication of symbols on the device screen:

1. Anti-theft complex diagnostic icon.
2. Service mode of alarm maintenance.
3. Option to deactivate the shock regulator by levels - warning and alarm.
4. Activation of silent protection mode.
5. Armed indicator with silent warning and warning signals.
6. A complete protective function for cars with loud sound impulses.
7. Option to “Search” for a vehicle.
8. Activation of the “Panic” mode.
9. Calling the car owner from the salon.
10. Turn on the second additional channel.
11. One of the door locks, the hood or the luggage compartment of the car is open.
12. Engine running icon.
13. Anti-robbery mode is enabled.
14. Indication of low battery in the pager.
15. The handbrake in the car is not tightened or the brake pedal is depressed.
16. Current time board.
17. The vehicle's ignition system is turned on.
18. Indicator of triggered shock and sensitivity sensor. The device's warning or alarm level may have been activated.
19. The alarm is activated.
20. Pager vibration mode.
21. Indication of the communication channel for transmitting control commands.
22. The car door locks are either locked or unlocked.
23. The operation of the zero additional channel, by default it is configured to open the tailgate.
24. The first additional alarm control channel.
25. Indicator of silent security or vehicle protection with sound.

Designation of icons on the display of the Starline A64 control device

How to program the key fob?

Using all the functions of the Starline A64 anti-theft complex is possible only after linking the pager.

To complete the task, do the following:

1. While the ignition is turned off in the car, you must press the emergency mode entry button seven times. Upon successful entry, the siren will sound.
2. The first and second buttons on the pager are clicked simultaneously. This step is repeated for each registered communicator. The time interval between recordings should be no more than five seconds. If the binding is successful, the siren should sound.
3. To leave the programming menu, the vehicle's ignition system is turned off.

How to use security mode

Features of car protection control with Starline A64 alarm system:

1. To enable the option, use button 1. It can also be activated by moving the cursor to the position of the indicator with two notes on the screen. After selecting the icon, the third key is pressed. The security mode will be activated if all doors, hood, trunk are closed and the limit switches are in working order.
2. If you want to enable protection with quiet sound signals, the cursor on the display moves to the position of the icon with one note. After selecting the indicator, press button 3. The car’s headlights will turn on, and the siren will emit one quiet signal.
3. To activate silent protection on the screen, the cursor must be moved to the position of the indicator with a crossed out speaker. The LED light will begin to blink, and the corresponding icon will appear on the pager display.
4. To turn on security without accompanying signals, the first key is “clicked” twice.
5. Activation of protection on a car with the engine running is carried out with the hood locked. The gearbox lever must be set to the neutral speed position (for a manual transmission) or to “Parking” (for an automatic transmission). To turn on security, you need to move the cursor to the indicator with one or two notes and “click” on the second key. Then the key is removed from the ignition, the driver leaves the passenger compartment and presses the first button.

If there is no remote control, the protection is controlled as follows:

1. The door opens with a key. The control element is inserted into the lock and the ignition is activated. This will cause the LED light to start blinking.
2. Press the button to enter emergency service mode three times. The ignition system is turned off. From this moment, the alarm will begin counting down a 20-second interval, after which the security system will be activated.
3. The driver leaves the car and locks all the door locks.
4. To further disable the protection, the user turns on the ignition and enters a personal password using the service button. After the last digit of the code is entered, the security mode is deactivated.

The Autoelectro channel talked about the operation of the Starline A64 anti-theft system installed on a Mitsubishi Pajero car.

Setting up the service mode

Features of A64 function control:

1. To control the battery voltage and alarm status, you need to double-click the third button of the communicator. It is possible to move the cursor on the remote control screen to the position of the corresponding indicator. After selecting it, you need to “click” on button 2 or 3. Information regarding the state of the vehicle and other parameters will be displayed.
2. To carry out the “Search” of the car, hold down the first button of the pager until a signal appears, and then press it briefly. The device will emit a melodic pulse. The siren, as well as the car's headlights, will sound six times.
3. To temporarily deactivate the sensitivity controller, click the second key on the key fob twice. It is possible to move the cursor on its screen to the position of the hammer icon. Then briefly press button 2 or 3. The security mode must be activated. The regulator warning zone will turn off.
4. To reactivate the shock sensor when the protection is on, press the second key twice. You can move the cursor to the hammer-shaped indicator and press button 2 or 3.
5. If you need to deactivate the operation of the tilt controller, press button 2 while security is on and then “click” briefly. To return the device to working condition, similar steps are performed.
6. To adjust the sensitivity parameters of the shock sensor, press key 3 for a long time, and then briefly once. The security mode, as well as the ignition system in the car, must be turned off. Using controls 2 and 3, the values ​​are changed. The transition from setting the warning level to the alarm level is made by pressing the third key.

Setting up a personal password for management

To assign a new code (example - 26) for Starline A64, perform the following steps:

1. The user enters the option programming menu. On the communicator you need to select function number 9, and its value is 3. This indicates setting up a two-digit code.
2. The button to enter the service mode is pressed four times. The ignition is activated. Upon successful entry into the programming menu, the anti-theft system will sound four siren sounds.
3. The emergency key is pressed once. A prompt to enter your personal password will appear on the remote control screen. A field with the “P—” indicator will appear.
4. The second pager button is pressed because the first code value is 2. The user can assign any combination in the range from 1 to 66. The characters 1, 2 and 3 are assigned to the first, second and third keys of the communicator. Characters 4, 5 and 6 are determined by the same controls respectively, only the first press must be long and the second short.
5. Then the first button is clicked. The siren will sound two beeps - this indicates readiness to accept the next sign.
6. Character 6 of the password is entered. The third key of the pager is first pressed for a few seconds, and then “clicked” briefly.
7. The ignition system is turned off, this will allow you to exit the programming menu. The car's headlights should blink three times.

Functions

The alarm has the following functions:

• Automatic engine start. To implement this function, the connection of auxiliary modules is required. The option can be used on vehicles with diesel or gasoline engines. The function is implemented automatically or launched upon a user command.
• Establishing the location of the vehicle. The function is auxiliary; to implement it, a GSM module is installed. It allows you to connect to the desired connector with the least risk of damage to the elements of the on-board network.
• Interior heater control. The option is available in vehicles with a diesel engine.
• Changing the position of the main seat. The function is enabled on vehicles equipped with an electronic control system. To use this option, use separate channels.
• Automatic start of low beam. The option is configured when you shift the handbrake and press the brake pedal.
• Synchronization of the anti-theft system with a smartphone. Implemented when connecting an auxiliary GSM module. The device transmits information about the alarm status to the phone screen.
• Economical energy consumption. When using a car alarm, the battery charge is retained for 2 months.
• Application of power keys. Helps to switch the head unit to silent mode. The option is also necessary to provide short circuit protection for the terminals. Power keys are a Starline development that reduces the risk of ignition.
• Slave mode. Allows the car owner to control the anti-theft system using the lock remote control. Modules are synchronized in advance.
• Possibility of introducing auxiliary protective equipment. For this purpose, position change sensors are connected. There are separate terminals for installing these modules in the head unit.
• Deactivating the power module. For this purpose, starting relays and electronic devices are used, connected separately.
• Protecting a car with the engine running. The key can be removed from the ignition switch.
• "Anti-robbery." If the vehicle is subject to unauthorized entry, the engine is blocked. Triggering of sensors or a user command allows you to block the motor. In this case, the car stops moving. The stop is carried out no later than a minute later, so the car thieves do not have time to drive a long distance.
• Automatic monitoring of sensor status. If a malfunction is detected, the head unit turns off the sensor, sending a signal to the pager.
• Saving data about triggered alarms with the ability to constantly study them.
• Deactivation of the regulator at a distance when the vehicle protection is installed. Only the warning parts of the sensors can be turned off.
• Change the volume of the sound signal. There is a vibration alert.
• Deactivating key fob keys.

Advantages and disadvantages

The advantages of the device include:

• uninterrupted operation of car alarms in any conditions (insensitive to interference occurring in cities);
• extended operating range of communicators (equipment suppliers deliberately overestimate the figure stated in the instructions, which in reality turns out to be lower; the operating range of Starline devices does not differ from that specified by the developer);
• ease of installation and use (the instructions are provided with diagrams that allow you to correctly connect all the elements);
• an extended set of functions at a fairly low price;
• increased strength of the key fob body (the pager is not damaged by mechanical stress).

Users cite the following disadvantages:

• quick failure of the pager (the key fob becomes unusable due to the buttons sticking);
• difficulty activating the Slave mode (if the option is enabled, the anti-theft system may not work correctly).

https://www.youtube.com/watch?v=L4rRY8oA2vI

Download installation and operating instructions in PDF format

You can download technical documentation for installation and management of Starline A64 systems using the following links:

Possible malfunctions and ways to eliminate them

The need to repair the Starline A64 alarm system may arise due to the following malfunctions:

1. The system has stopped responding to commands sent by the user. To fix the problem, you must first check the battery in the pager and replace it if necessary. You should disassemble the communicator and identify the failed elements - damaged contacts and buttons need to be re-soldered.
2. The system does not perform functions correctly. The problem may be due to the pager not working properly due to moisture getting on it. To fix the problem, you need to disassemble the remote control, remove the board from it and dry it (do not use a stove, hair dryer or battery). It is recommended to remove any remaining moisture using a dry cloth. It would be useful to clean the circuit from dirt and dust.
3. The alarm responds to commands, but the range of the pager has significantly decreased. If the problem is not related to low batteries, then most likely it is due to interference in the area. They can come from manufacturing enterprises and transformer substations. To disable the protection mode, you need to get as close as possible to the transceiver installed in the car.
4. Starline A64 does not lock all door locks. If the limit switches themselves are working properly, then the user should “ring” the wiring to detect defects with a multimeter or other tester. Damaged electrical circuits must be replaced, as well as cables on which the insulation has worn out, as this may cause current leakage. When laying new wires, it is recommended to additionally wrap them with electrical tape to ensure their higher reliability and prevent rapid wear.
5. The anti-theft system does not function correctly and automatically disables and activates the security system. Most often, the cause of the malfunction is related to the operation of the control unit. The device's firmware may have crashed; to fix the problem, you will need to reconfigure the software using a computer. Microprocessor failure is often caused by regular exposure to vibrations during movement, as well as moisture.

Features of anti-theft functions

When using this device, you can connect a digital wireless locking relay. Thanks to the presence of a special connector, you can add a GSM/GPS module to the car alarm. If an alarm is connected to the device, the light will turn on when unauthorized access is attempted. https://www.youtube.com/watch?v=DZYHWPhMBGE Thanks to the presence of a special command in the a64 car alarm, you can easily control additional car door locks. With this device you can easily close the hood lock. If the need arises, you can additionally block the engine, thereby simulating its malfunction. When using this device, you can open the trunk if the standard alarm is disabled. Using a car alarm you are allowed to:

• Control the preheater from a distance;
• When the vehicle is moving, turn on the low beam headlights in automatic mode;
• In automatic mode, install the seat for the car owner;
• Return the steering column to its original position in automatic mode.

If the car owner turns on the security mode, the mirrors will fold automatically. The instructions will help you learn how a car alarm works. After the security mode is turned on, the light path lights up. Thanks to the security mode of this device, the hatch will turn on automatically. This car alarm model has excellent anti-theft functions, which allows the owner to be completely confident in its performance.

Video

User Stepan Putyatin briefly spoke about the features of flashing the Starline A64 anti-theft system.

Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes (100.00%)

No

X

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate this article: ( 2 votes, average: 5.00 out of 5)

Discuss the article: