The Magicar 5 alarm system is an effective anti-theft system that helps protect your car from intruders.
Control is implemented via a key fob that transmits commands via a radio channel. To improve ease of use, the key fob has a liquid crystal display.
It displays information both about the current state of the system and helps in setting up the Sherkhan 5 alarm system. The operating distance of the radio channel is 1500 meters.
To automatically activate or deactivate the car security mode, depending on the location of the car owner, the “Hands Free” function is used. Sherhan Magicar 5 allows you to use two operating options:
- With a minimum range. At the same time, the icon is continuously displayed on the screen
- With maximum operating distance for the hands-free function. In this case, the pictogram blinks at a certain frequency. Additionally, the “AUTO” sign lights up.
To configure the function, you must hold down the “I” button for 2 seconds. In this case, the mode will change in the following sequence:
- Activation of the minimum sensing distance.
- Turning on the second mode.
- Deactivating the mode.
All adjustments made are accompanied by a melodic signal. If it is not needed, it is recommended to turn off hands-free, as long-term use of the function leads to a reduction in the battery life of the key fob. This is due to periodic checks of the presence of the car owner.
How to enable auto start on the Sherkhan 7 alarm system?
Procedure for enabling autorun
engine on
the Sherkhan 7
is quite simple. You need to press button 2 (II) for 2 seconds and release. After pressing the button, the system will arm the car, close the doors and start the engine. After the engine starts, the key fob display will show a countdown of the engine start time.
Interesting materials:
What are the disadvantages of laser hair removal? What diuretics? What can be the consequences of cystitis? What can be the consequences after taking birth control pills? What are the best freezers? What are the best motorcycles? What are the best mp3 players? What men's perfume is trending now? What men's sneakers are in fashion 2022? What men's shoes are in fashion 2020?
Should I turn it off or not?
When “Turbo” is activated, the car is set to alarm with the engine running, and then it is automatically turned off. This is done so that the turbine cools gradually and does not become deformed. After stopping the vehicle, the engine should run for about 5 minutes. You can organize the necessary delay yourself by leaving the engine on for 5-10 minutes after stopping the vehicle and letting it idle.
For motorists who do not want to sit in the car for this period of time, the turbo timer built into the Scher-Khan Magicar 5 alarm comes to the rescue. If it is activated, the car owner can lock the car, leaving the turbocharged engine on. After a predetermined period has expired, the device stops the operation of all parts of the vehicle.
This function is activated by default in accordance with the factory alarm settings: the engine idles for 2 minutes after the end of the trip. It helps not to change the turbine for a long time, but requires additional fuel consumption. Many car owners like to turn off the turbo mode on the Sherkhan 5 Magikar to save on gasoline. Some people find it scary that their car is running without them being there. These reasons are not sufficient reasons to disable the feature.
Is it necessary to install a turbo timer on a diesel engine?
As you know, diesel engines, in the vast majority of cases, are equipped with turbines that pump air into the combustion chamber. It is to extend the life of the turbine that a turbo timer
. ... If you turn off the power unit immediately after stopping, the heated turbine components will cool down too quickly.
Interesting materials:
When to replace tires with summer ones? DSLR vs mirrorless camera, which is better? What is a SLR camera? What is a jacquard towel? What is liquid key? What is power steering fluid? When should I change power steering fluid? When is it legal to change your shoes on winter tires? When is it legal to install winter tires? When is it legal to change winter tires?
How to use the turbo timer
Every car owner should know how to disable Turbo on Sherkhan Magikar A and other models. In most devices, the combination discussed above works. To activate the mode after completing a trip, take the following steps:
- Close the doors.
- Set the gearshift lever to neutral for a manual transmission or to P for an automatic transmission.
- Turn the key in the lock from the On to Off position. In this case, the engine remains in the running position for a certain time.
- Get out of the car and close the doors. If you open the doors immediately, the operating time of the TURBO mode will be reduced to 20 seconds.
After completing these steps, you can activate the security mode. To do this, press the I button, after which the locks will close, the starter will be blocked, but the engine will run for the entire period set for the turbo timer. After turning on the security, the door, trunk and hood sensors are immediately protected, and the shock sensor works within 30 seconds after the engine is turned off. As soon as the doors open, the door, trunk or hood sensor is immediately triggered, and the car goes into alarm mode. You can turn off the alarm only with a button.
Immobilizer crawler magicar 5
Incompatibility of the autostart system with the immobilizer leads to the need to install a crawler. This module is not included in the basic package of the Sherkhan alarm system, so it will need to be purchased additionally.
The device practically does not require the participation of the car owner in setting up. After installation, the immobilizer crawler automatically reads the engine unlock code. The received information is stored in the module memory. After this, starting the engine becomes possible without the immobilizer unlock key.
Problems encountered with the device
Reasons why the turbo timer does not work:
- incorrect connection to the engine starting circuit;
- incorrect settings;
- the handbrake is not engaged;
- the selector is not in parking mode;
- On the key fob, the turbo mode is inactive.
You should start diagnosing the problem by checking the settings. If activation still does not occur, you should pay attention to the connection diagram. It is necessary to check the reliability of the cables and the absence of breaks in the conductors going to the timer.
Comparison of installation with and without alarm
If you install a turbo timer together with an alarm system, then the main advantage is the smaller number of elements compared to the separate installation of each unit. This option is well suited for new cars that do not have a security system. If you have an old, unreliable alarm system, a comprehensive replacement is also recommended.
If there is a good, previously installed alarm system, it should not be dismantled. Even if there is no separate channel for the turbo timer, there are options for installing it. The advantage of such an installation is the ability to create a system that is more secure from the actions of intruders.
Setting alarm time sherhan
In addition to automatically starting the engine using a control signal from the key fob, magicar 5 has the ability to start the engine using an internal timer. In this case, the icon appears on the display. For the function to work correctly the first time you use it or after replacing the battery in the key fob, you must set the clock. It is performed in the following sequence:
- Press and hold the combination of buttons “II” and “III” for 2 seconds. The key fob programming will be activated, accompanied by a sound signal.
- Press “I” for half a second. The time will begin to flash.
- Use the “I” and “II” keys to set the hours and minutes respectively.
- To fix the set values, you need to leave the programming mode by simultaneously pressing “II” and “III” for two seconds. This process will be accompanied by a sound signal.
Incorrect time setting will lead to desynchronization of the key fob readings with the real clock. Because of this, it is not possible to correctly adjust the automatic start by timer. The start of warming up the engine and interior will occur earlier or later than the car owner’s expectations.
Setting autostart time
Owners of the Magikar 5 anti-theft system can program time intervals for engine auto-start (after 2, 4 and 8 hours) using a timer. To do this, follow these steps.
- By simultaneously pressing keys 1 and 2, enter programming mode.
- If the timer is on, turn it off. To do this, briefly press keys 2 and 4. The inscription “Timer” should disappear from the display.
- Briefly click on key 4 thirteen times. Each press is confirmed by a single sound of the siren signal.
- Select the desired engine autostart mode. Key 2 – after 8 hours, 3 – after 4 hours, 4 – after two hours.
- Turn on the timer by pressing keys 2 and 4 simultaneously.
You can program the warm-up of the car engine at fixed time intervals: 5, 15, 25 and 45 minutes. Press buttons 1 and 2 to enter the menu and do the following.
- Press button 4 twelve times. Twelve siren beeps should sound.
- Select the required engine operating time by activating the following buttons: 1 key – 5 minutes, 2 – 15 minutes, 3 – 25 minutes, 4 – 45 minutes.
- Pressing keys 1 and 2 simultaneously will exit the programming mode.
Find out how to change the battery in the Sherkhan key fob.
Purpose of the buttons
The buttons on the communicator support 4 types of operation:
- short exposure;
- long (more than 2 seconds) press;
- quick complex impact on 2 keys;
- long-term joint holding of 2 buttons.
The driver is given the opportunity to turn on or off the security mode, activate remote start, as well as other functions. More detailed purpose of the buttons is indicated in the attached instructions.
Self-installation and setup of a turbo timer
The reliability of the system and the safety of the vehicle depend on a correctly installed turbo timer, so it is recommended to follow the instructions below:
- disassemble the lower part of the torpedo;
- connect the turbo timer according to the image below;
In addition to the timer, you will need some tools for installation. Using pliers and screwdrivers, you can disassemble and reassemble elements of the car interior. Since the operation of the machine is accompanied by increased vibration, all wires must be secured with clamps, and the connections must be insulated using heat shrink.
The move away from naturally aspirated engines brought its own peculiarities to the operation of iron horses. The installed timer will allow you to take care of the car without wasting time on cooling the turbine, and combination with the security system will protect the car from theft.
Which models have it?
A turbo timer is provided on almost all alarm models Sherkhan Magikar 5, 6, 7, 8 and others. The system is also provided on the security systems Logikar A, Magikar A, etc. Detailed information regarding the availability and operation of this function can be found in the car manual.
Knowing how to disable the turbo mode in the Sherkhan alarm system, you can easily activate or deactivate the option when it is not needed. For owners of cars with a turbine, its presence is indispensable.
In the comments, share how you use the turbo timer on Sherkhan Magikar 5, how you can disable it, and how necessary this option is.
How to disable the turbo timer
Turbo is a useful option that allows you to extend the life of the turbocharger. But there are situations when it is necessary to disable the turbo timer on Sherkhan Magikar 5. The action algorithm is as follows:
- Take the main security system key fob.
- Press buttons III+IV.
- Wait for confirmation to disable the option. If you managed to disable the Turbo mode on Sherkhan Magikar 5, the siren and hazard warning lights will sound twice each. The LED indicator lights up twice. In addition, the headlights and the lock image should flash five times, after which the Turbo symbol previously provided on the screen disappears. It is located above the car icon and the inscription ZZZ.
Knowing how to disable Turbo on Sherkhan Magikar A or another model, you will be able to control the function and activate it as needed.
Autostart based on temperature and voltage
Since Sherkhan Magikar 5 (in the generally accepted meaning) does not allow you to enable autostart based on temperature, only limiting periodic startup is possible. In other words, the car will try to start every 2, 4, 8 hours if the following conditions are met:
- the temperature at the installation point of the central unit is lower than the specified threshold;
- The battery voltage is lower than the specified threshold.
You can set one of these conditions, or two at the same time. Their programming is described below.
