Instructions for replacing and installing new-style mirrors on Priora: different options for connecting “American” models


How to turn on heated mirrors on a Priora

Heated mirrors of the Priora
provide heating of the rear view mirror of the Lada Priora car.

LADA Priora, Lada Priora is a family of Russian passenger cars produced by AvtoVAZ OJSC and classified according to the European classification.

You can order heated mirrors for a Priora car through the representative office in St. Petersburg, tel. 8(812)4524540 by submitting an application by email.

To obtain the mirror heating circuit for the Priora GEN-147 on a scale of 1:1, print the file GEN-147;

. Attach it to your rearview mirror and determine how suitable this heater is for you.

Representative office phone numbers or +7 931 354 20 56. You can also buy these heaters in stores in St. Petersburg. Find out the store addresses and the cost of the mirror heater in advance from the official dealer by calling 8 (812) 449 09 38.

The parcel is sent by Russian airmail on the next (working) day after payment for the order. Delivery time is from 5 to 7 days to any point, depending on the location of the post office of the customer for heated mirrors.

Installation of mirrors

Installation of the side elements depends on the chosen model and will not take much time. First, remove the product being replaced, which is secured with three bolts. If the model is chosen correctly, in most cases no drilling will be required. The mounting area is checked for chips and rust and cleaned if necessary. The new element is installed in the grooves and the fastening bolts are tightened.

To install some Polytech models, you will have to drill a hole in the door. It is better to avoid placing it on standard handle holes. Otherwise, the adjustment knob will not fit well and will fall out. You don’t have to drill a separate hole, but instead pass the cables through the standard ones, pulling them out of the fasteners.

The interior mirror is mounted on a bracket or glued to the windshield. In this case, it is better to use special glue for rear-view mirrors, which is sold at any car store. Before gluing, the windshield area and fastening are degreased. To do this, wipe the surfaces with a cloth moistened with alcohol. Then mark the place where the glue is applied on the glass with a marker, outlining the fastener.

Crush the ampoule with liquid and moisten the mount with it. After 1-2 minutes, a drop of glue from the tube is applied to the glass surface in the center of the marked area. Then press the fastener and hold it for 1-2 minutes until the glue sets. Excess glue and traces of marker are removed with a napkin.

If you do not remove excess glue, the mirror will not fit into the mounting grooves.

After about half an hour, put a mirror on the mount and tighten the bolt.

Installation of electric drive and heating

The mirror is mounted in the same way as a regular one, but additional holes may be needed for the wires. They are drilled out according to a stencil, which is usually included with the kit. Then the electrical elements of the product are connected. The circuit is closed and the wires are brought out into the cabin. The connection is described in detail in the installation instructions.

Sample application for obtaining GEN-147

Hello! Please send the following heating elements by Russian Post:

GEN-147 - two sets

My address: index - 344113, Rostov region, Rostov-on-Don, Koroleva Ave., 11, apt. 23

Efremov Dmitry Sergeevich

Mobile phone: 8-904-147-92-75

Send your application to the email address: [email protected]

The payment method and order amount will be indicated in the response letter.

Technical characteristics of heated mirrors GEN-147 Priora

You can install heated mirrors on the Lada Priora in our service. Installing heated mirrors on Lada Priora takes 6-8 hours. The mirror housing is completely disassembled, and the lower and side parts of the dashboard and center console are partially disassembled. The heating wires are extended to the mirrors and to the power supply, and all this is output to the rear window heating button through a relay.

Installing heated mirrors on the Lada Priora is not a luxury, but a necessary necessity. Heated mirrors increase safety and create driving comfort, especially in winter and during rain. Heated mirrors, or rather the heating elements themselves, are mounted in the body of a standard mirror. On some Lada Priora models, it is possible to install a non-standard heated mirror element. This slightly increases the total cost of components, but makes the work itself cheaper.

Cost of heating mirrors Lada Priora:

The cost of installing heated mirrors includes installation work, a wiring kit, relays and the heating elements themselves or a non-standard mirror with built-in heating.

When to install heated side mirrors:

— the standard heated mirrors have failed; — The car has heated mirrors.

We do not repair standard heating

mirrors for Lada Priora. We can either replace or install a new one.

Warranty for
heated mirrors
is 180 days.

To work you need to have:

  1. Heated mirror kit. In my case, these are heating elements made by Salina;
  2. Copper wire 0.75-1 mm long 8-10 m;
  3. Small female terminal (2 pcs.);
  4. Terminal-ring “ground for screw” (2 pcs.);
  5. Clamp terminal (1 pc.);
  6. Fuse holder (1 piece);
  7. Soldering iron, probe, several screwdrivers, needle file;
  8. Heat shrink, electrical tape.

Note: The above components may differ depending on the connection scheme you choose. In my case, the connection will be made by connecting the heated mirrors to the heated rear window. Below I will provide three alternative connection methods that can also be used.

The heated mirrors stopped working (you need to find the location of the fuse) *

The heating of the mirrors has stopped working (you need to find the location of the fuse) I found one (it’s intact), but I can’t find the second one shown in the diagram with a red arrow. When you press the button in the panel, the switch clicks, but none of the mirrors heat up. Please tell me I am attaching the diagram

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]