How to connect the trunk button of a VAZ 2110 injector 8 valves

The electric drive of modern cars is an irreplaceable technology; today its use determines the safe and long-term operation of any vehicle. However, not every car is equipped with an electric drive and is equipped with a power lock properly. Is it possible to fix this or even install electrical equipment in your own car using improvised means? What is important to know about the electric drive system for this? To resolve such questions, it would be more correct to start with the mechanism of action of such a system.

Stories from our readers

“Fucking basin. "

Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.

Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet. You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, they call it Forex. But when I started delving into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums, studying trading strategies. I tried it on a demo account, then opened a real account. To be honest, I didn’t manage to start earning money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day. I managed to get the car buy after half a year, but in my opinion this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, I have more free time for myself and my family. You’ll laugh, but I work directly on the phone)) If If you want to change your life like me, then here’s what I advise you to do right now: 1. Register on the site 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY! I also advise you to download the application to your phone, it’s much more convenient to work from your phone. Download here.

Self-installation and connection

You will need : an actuator, 4 meters of wire, a fuse, a VAZ 2110 trunk release button, a 4-pin relay.

If you install it yourself, you can follow the example of the manufacturer by making a plate for mounting the actuator according to the following diagram:

Another method of installing the electric drive does not involve the use of a special fastening, but it will eliminate the possibility of opening the trunk from the outside.

1. Loosen the lock drive rod screw.
2. Remove the lock drive rod.
3. Having attached the electric drive to the lock, mark the holes for its fastening on the trunk lid amplifier.
4. Drill two holes with a diameter of 5 mm.

1. Drill a hole in the lock drive boss to a diameter of 3 mm.
2. Bend the rod as shown in the photo.
3. Secure the electric drive with a bracket threaded from the inside into the cover reinforcement and with nuts screwed onto the threaded ends of the bracket. We connect the electric drive to the lock with a rod.
4. We install the button in its normal place.

We stretch the wires under the headliner or under the plastic sills on the left side of the body. Connection diagram for the electric trunk drive using a relay:

This method of installing an electric trunk lock drive is also suitable not only for modern Lada cars (for example, Lada Granta, Lada Kalina, Lada Priora, etc.), and for foreign-made cars.

Let us remind you that there is another interesting way to place the button - instead of the trunk lock.

Install the electric trunk lock yourself..

Which actuator installation method did you choose?

Source

Review of Manufacturer Prices

*prices are current as of 10/09/18.

The opinions of the service station masters agreed on the choice of manufacturer - there is not much difference. When purchasing original products, the service life of the equipment exceeds 5 years. Installation in “makeshift” conditions and poor-quality manufacturing only shorten the period of use of the equipment. Often the owner is to blame for the breakdown, violating the vehicle maintenance regulations.

How it works

Many cars are not equipped with a trunk release button from the factory. The car owner has to do this with his own hands.

Even budget foreign cars, as well as domestic car models, can get this function. The cost of its implementation is small.

There are a number of modifications for the cargo compartment of passenger cars. Someone is soundproofing the trunk lid. Others completely insulate the trunk.

It will be convenient and correct to do automatic unlocking. In addition, the scheme for opening the trunk with a button is implemented without skill, as well as experience and special skills.

This is the meaning. A button is displayed in the interior. The driver presses it. The device operates on the principle of a push-pull mechanism. Springs will ensure the lid lifts. This way the driver won’t have to press a button on the trunk or fiddle with the key in the lock.

Another option is to display a button on the alarm remote control.

Where to begin

Now to the question of how to connect the trunk release button.

You need to start by studying the instructions from the alarm. An option for those who are going to connect a button to the remote control of the car’s security system.

In the connection diagram you need to find the wire of the desired color that goes to opening the tailgate. This is usually a yellow-red wire.

If you have figured this out, then select a location for installation, and also begin the installation process itself.

Self-installation and connection

You will need : an actuator, 4 meters of wire, a fuse, a VAZ 2110 trunk release button, a 4-pin relay.

If you install it yourself, you can follow the example of the manufacturer by making a plate for mounting the actuator according to the following diagram:

Another method of installing the electric drive does not involve the use of a special fastening, but it will eliminate the possibility of opening the trunk from the outside.

1. Loosen the lock drive rod screw.
2. Remove the lock drive rod.
3. Having attached the electric drive to the lock, mark the holes for its fastening on the trunk lid amplifier.
4. Drill two holes with a diameter of 5 mm.

1. Drill a hole in the lock drive boss to a diameter of 3 mm.
2. Bend the rod as shown in the photo.
3. Secure the electric drive with a bracket threaded from the inside into the cover reinforcement and with nuts screwed onto the threaded ends of the bracket. We connect the electric drive to the lock with a rod.
4. We install the button in its normal place.

We stretch the wires under the headliner or under the plastic sills on the left side of the body. Connection diagram for the electric trunk drive using a relay:

This method of installing an electric trunk lock drive is also suitable not only for modern Lada cars (for example, Lada Granta, Lada Kalina, Lada Priora, etc.), and for foreign-made cars.

Let us remind you that there is another interesting way to place the button - instead of the trunk lock.

Installing a trunk release button in the interior of any budget car is much simpler than it might seem at first glance.

The whole task is to slightly modify the lock, namely to supplement its mechanism with a special electric drive (activator).

When you press the button, it will operate on the principle of a retractor/extrusion device, opening the lock.

The springs will lift the trunk lid, providing quick and convenient access to the luggage compartment of the car. If the alarm key fob has a separate button for opening the trunk , then it will also perform its functions.

What are the alternatives?

1. If your VAZ-2110 has simple buttons for locking the doors, then you can try to pry them off with a rope. To do this, you will need to slightly press the top of the door, and then push a rope with a tightening loop through a small gap into the interior. The loop must be placed on the latch cap and tightened, and then pull the button up to unlock the lock.
2. There is another option - to enter the interior of the VAZ-2110 through the rear windows. To do this, you will need to remove the seal from the small window near the trunk, and then carefully squeeze it out. This is done using a flat or Phillips screwdriver, which needs to be slipped under the seal in the lower right corner of the window. After the screwdriver is completely inserted in the indicated place, start using it to press the window toward you, gently pulling the seal. Once the gap is sufficient, put your hand through it and lift the door lock button. Then all you have to do is return the glass to its place and install the seal; it is better to replace it later.
3. There is another way. And it consists in the fact that you need to press the door and use the wire to reach the hook located inside it. Wrap a thin cloth around a pry bar or flathead screwdriver, and then use it to carefully pry back the top corner of the door. You need to drive a wooden peg into the resulting space or place a tonometer pillow in it and inflate it using a bulb (there are special devices for opening doors that work on the same principle). The resulting gap is enough to insert a thick wire into the interior, which you use to pull the hook to open the door.

If you were unable to open your car using these methods, then you should try rougher options.

What do you need for work?

A similar connection diagram for the trunk button attracts many.

To realize your idea, you need to prepare materials and tools.

• electric drive (activator) of the luggage compartment lock;
• universal 4-pin relay;
• fuse blocks;
• fuse;
• wires;
• female type terminals;
• trunk opening buttons;
• heat shrink tube;
• electrical tape;
• plastic clamps.

The block is placed for safety reasons. Mounted on the positive wire. The fuse can be taken as standard, 10 Ampere. Do not need anymore.

Determine the length of the wiring individually. But practice shows that 5-6 meters is enough with a margin.

Take the opening button from ten. It is considered the most reliable and also affordable. If you are tuning a domestic car, then it will definitely fit.

At any car market it will not be difficult to buy the entire set. It will cost 600-800 rubles. Maximum 1000 rubles.

Article: 2822.3710-02

Order code: 079976

150 ₽
Payment methods: Cash upon receipt VISA, MasterCard Payment through a bank
Purpose of the switch button: opening the trunk Manufacturer: AVAR You can get information about the product or place an order by calling 8-800-600-69-66 .

• All characteristics
• 2 reviews

In stock Available for order – >10 pcs. Data updated: 05/29/2021 at 15:30

Order code
079976 Articles 2822.3710-02 Manufacturer AVAR Catalog group: ..Electrical equipment Electrical equipment Width, m: 0.03 Height, m: 0.025 Length, m: 0.025 Weight, kg: 0.01 Purpose of the switch button: trunk opening
Reviews about the product

Certificates

Reviews

There are no reviews for this product yet.

Write a review

• Switch button VAZ-2110-2112 trunk opening AVAR Article: 2822.3710-02 Order code: 079976 150 ₽ or place an order by calling 8 800 6006 966

Availability of goods in warehouses and stores, as well as the price of the goods is indicated on

29.05.2021 15:30

.

Prices and availability of goods in all stores and warehouses are updated once an hour.
If there is a sufficient quantity of goods in the store you need, you can buy it without pre-ordering. Internet price
– valid when ordering on the website or through a call center operator by phone

8-800-600-69-66

. Subject to sufficient quantity of goods at the time of order.

Price in stores

– retail price of goods in store sales areas without pre-order.

The period for moving goods from a remote warehouse to the warehouse of an online store.

The parts data presented on this page is for informational purposes only.

9e966ec6fc803979895d7338ccad0276

Add to cart

Available to order:

Order quantity:

Product successfully added to cart

!

Electrical diagram for connecting the trunk lock drive.

Electrical diagram for connecting the solenoid (actuator) for unlocking the trunk I drew a standard car relay, 4 or 5 contacts does not matter, I later described the omron G5LB-1-25 10A relay from a broken washing machine, but in principle they are, in addition to size, winding resistance and the response volume is no different.
Let's describe the electrical circuit for connecting the trunk lock solenoid: we apply a constant plus to the 87 and 85 contacts of the relay, having first run it through a 5-10 ampere fuse, I took the constant plus from the car alarm power supply, I still pulled the wire from it. At pin 30 we hook the electric lock itself, a positive charge will run through it, we screw the second wire from the actuator onto some unpainted bolt of the car body, it will be negative. Contact 86 will receive a negative pulse either from the button or from an additional signaling channel.

The VAZ button 2822.3710-02 has three contacts, we connect the alarm to pin 3, pull the wire from pin 1 to pin 86 of the relay, and pin 2 to the car body. If the button is not needed, then we connect the wire from the alarm directly to pin 86. That’s basically the whole scheme, everything has been tested and everything works great.

Broken wiring

This is perhaps the most common malfunction on self-installed electric locks. The reason is an unsuccessfully selected place for pulling the wires. As a result, they are damaged, which leads to a short circuit or complete breakage.

Diagnostics can be divided into 2 parts:

• Checking resistance. All sections of the chain are checked for damage. If this indicator is close to infinity, then somewhere the wire has broken off. You can also check this by measuring the voltage;
• Carefully inspect the wires for damage to the insulation. This usually leads to short circuits and current leakage to the housing, which makes the lock impossible to operate.

To check, you will need a multimeter or a tester made from a regular 12 V light bulb. Pay attention to the contacts. Often they oxidize, which does not allow current to flow normally. It is recommended to regularly check the status of the contacts. Be sure to clean them twice a year and lubricate them with a special compound. In many cases, it is poor contact that causes the lock to fail.

Trunk release button for Priora station wagon

Ury

Apparently not, I removed the chip from the electric motor on the wiper. I'll try your advice! But how to open the trunk?

Take off the door trim and you'll see.

Ok, I'll climb tomorrow and have a report! Is the activator located next to the rear wiper gear motor?

In general, most likely your relay has failed. Located in the black box area. It can be found by the wires from the opening button (look where they go). So I found this bastard and replaced it.

pull out the trunk release button and connect the wires directly - the replacement button will work

Information on icons and features

can't start topics

reply to messages You
cannot
edit your messages You
cannot
delete your messages You
cannot
vote in polls You
can
attach files You
can
download files

Installation process

See also Where to dispose or sell old tires for money and for free
Many people are interested in how to make the trunk open with a button. Now you'll find out.

Using the example of the timeless classic VAZ 2107, the process looks like this:

• Install a relay under the hood. The best option for placing a four-pin relay. You don't have to run the positive wire to the button. Plus, the space under the dashboard is more difficult to find. A good option is to attach it to the windshield washer reservoir. Make sure that connections and contacts are tight and insulated;
• Pull 2 ​​more wires through the standard hole of all wires. One will go to the button, and the second to the activator;
• The wiring needs to be routed throughout the cabin. It is better to do this on the roof. And to the trunk. Or use areas where standard wiring runs under a layer of carpet;
• Carefully pull the wire through the luggage compartment to the lid. The wiring is connected to the main bundle. Fixed with electrical tape or a plastic clamp;
• Now the activator is attached to the trunk door lock. Do not forget that the electric drive works by pushing and retracting. To change the direction of movement, it is enough to change the polarity;
• To connect the activator, you need to do the following. Unscrew a couple of nuts and remove the lock. Use a drill to make a hole in the side. Place the rod there and connect it to the tongue of the locking mechanism;
• It will be correct to close the installed activator, as well as the lock using the casing. This will prevent dust and dirt from entering. Plus it will protect against mechanical damage;
• Now select the place where the button will be located in the cabin. If this is a seven from AvtoVAZ, then they usually choose a plastic trim to the left of the driver’s seat. This will allow the button to always be at hand. He quickly pressed the button, left the cabin, and the trunk was already open;
• The button is easy to install. A hole is made in the cover. A button is inserted there, and terminals are also put on. The minus is attached here, on the plastic lining fixing bolt.

Benefits of this option

Many people do not find anything special in this option, but once you try the electric trunk drive, you immediately begin to appreciate all the advantages. The positive aspects of the option to automatically open the trunk on the VAZ-2107 include:

1. Convenience. By the time the driver leaves the cabin, the trunk will already be open.
2. Practicality. There is no need to remove the keys from the ignition switch to open the trunk with the key, especially if you have just started the engine and are warming it up.
3. Fashion. Almost all modern cars are equipped with such an interesting option, so the “seven” with this function will look more interesting against their background, especially with tuning.

Next, we’ll look at what the procedure for installing an electric drive for opening the trunk on a VAZ 2107 is with your own hands.

What is required for the work

Before starting the work process, you should purchase the necessary equipment. To carry out the work you will need:

• A button that, when pressed, will activate the electric drive. The best option is a button from a VAZ-2110 car, the cost of which is about 50-80 rubles.
• The relay is four-pin and has a special terminal for it.
• Activator.
• Wires.
• Female and male connectors, as well as electrical tape and heat shrink.

You can easily find any of the components in any auto store, and then install and connect it to your car yourself.

Installation of the activator

Initially, it is necessary to install an activator, which is an electric drive that works to retract or repel, depending on the connection. The first step is to remove the lock and install the activator rod. To remove the lock, you will need to unscrew two nuts.

After this, you need to drill a hole in the side of the lock to insert the rod and connect it to the lock tongue. The rod will need to be bent (secured), it should look something like the one shown in the photo below.

After fixing the rod to the lock, the latter can be installed in place. It is advisable to remember the tilt level of the lock and install it as well, so that you do not have to adjust it during installation. Now you can attach the activator to the trunk. To do this, you will need 2 self-tapping screws and a special plate, which comes with the product. After this, you can manually try to see if the lock will work when opening. When the activator is installed on your VAZ 2107 car, you can proceed to the next stage - connection.

Connecting the product

Before carrying out connection work, be sure to disconnect the negative terminal from the battery. To begin with, we present the diagram according to which the product will function.

The electric lock will be supplied with 12V power directly from the battery, although you can also use a wire from the cigarette lighter. First, connect the wire to the “+” terminal of the battery.

Why doesn't the trunk open from the button on the VAZ 2110 and 2112? 4 popular reasons

Car enthusiasts are often interested in why the trunk does not open with a button on the VAZ 2110 and 2112. For modern cars, opening the trunk with a button is quite common. Even on models that were not originally equipped with such an option, it can be found. Usually, the button is installed simultaneously with the installation of the central locking or alarm system. In the second case, the trunk lock is integrated with the security system. Failure of the trunk lock is quite an unpleasant phenomenon. For example, if necessary, you will not be able to get a spare tire. Therefore, it is important to fix the problem as quickly as possible.

Why come to us?

• We respond instantly to your call. We perform emergency trunk openings 24 hours a day.
• Free consultations.
• A team of specialists from DM-Master LLC will arrive as quickly as possible, check the documents and open the trunk using special tools.
• We have fair prices for urgent trunk openings and no damage.
• Professionalism of the craftsmen - employees of zamokzamkov.ru have extensive experience in opening car locks of foreign and domestic production.

To order a trunk opening, fill out an application. We work seven days a week. You are required to provide your address, information about the car and the availability of the necessary documents. A guarantee for the safety of your car and excellent discounts await you, call!

Installing an electric trunk drive

In the latch it is necessary to drill several technological holes with threads intended for fastening screws under points 3 and 4. With such screws you can secure the end of the cable. One question remains unresolved: how to get rid of the lock latch from the trunk lid? This can be realized by making a hole in the trunk lid, the diameter of which will be 1.15 cm. To knock out the axle in it, you need to insert a dense drift into it and remove the rod. It is necessary to ensure that the roller recess and the two screws are located symmetrically to each other. When removing the axle, the plate moves and the inside is removed along with the pusher. To make it impossible to open the lock with a key, it is enough to reduce the size of the end of the pusher by approximately 10 millimeters.

Who can you trust to re-equip closing devices?

This modernization can be offered to “tuners” who will save you from unnecessary locks and keyholes and handles located on the outside of the luggage compartment lid and car doors. In order to control the trunk locking device, you will need an electrical contact device.

This system will work as follows: by pressing a button, which is located in any convenient place for the driver, an additional contact system is activated, which starts the main relay, after which the core is retracted and the trunk lock latch is opened. In this case, we cannot do without auxiliary parts and fasteners, for this reason we will have to make a fastening device for the roller. This wheel, with the help of a screw, is easily attached to a bracket, which is held on the body by a special screw.

Faulty key fob or button

The problem is often hidden in the control panel. If the lock is activated using a remote control, then diagnosing the problem is as easy as possible. In this case, not only the trunk drive will fail, but also the central locking system. Try replacing the battery in the key fob; if this does not help, it makes sense to replace the remote control.

The control button located in the cabin rarely fails. Most often the reason is in contacts. To check, remove it from the car. Then check in the simplest circuit together with the lamp. In case of malfunction, you will have to buy a new button.

• Relay. Check the trunk release relay. To do this, while being next to it, you need to press the key fob button (an assistant will be required when installing the button in the cabin). A working relay should make a click. If there is no click, then most likely the reason is in the relay, replace it.

• Battery. Sometimes the trunk lock does not work only when the engine is running. The reason for this is a weak battery. When the engine is running, the motor is started from the generator. In its absence, the battery simply does not have enough energy. This usually happens with expired batteries.

Conclusion. As a rule, the trunk lock was not standardly installed in the “tenth” family. All available options are installed by the owners themselves. In this regard, the official manuals do not contain information on repairing this element. Why the trunk does not open from the button on the VAZ 2110 and 2112 is a question often asked by car enthusiasts. There are quite a few reasons for this problem. To troubleshoot and fix the problem, you will have to go through all the elements of the electric drive of the lock.

If you find an error, please select a piece of text and press Ctrl+Enter.

DIY installation

We adjust the cable tension for proper unlocking and locking of the trunk.

After that, we connect the button itself; for this purpose, there is a special place in the car panel under the instrument panel on the driver’s side.

It would be wrong to place a button near the cigarette lighter or a drawer for small items when there is a regular place for this in the car.

Rice. The simplest connection diagram for the electric drive of the trunk lock.

If you don’t have an additional brake signal, or for some reason you want to use it, then, as mentioned above, we pull a new wire to the bottom of the instrument panel on the driver’s side and connect it to the closer and to the battery through the fuse.