Replacing the bearing on the front hub of a VAZ 2110, 2111, 2112 with your own hands

What bearings are installed on VAZ 2110, 2111, 2112

Analogs and modifications

Despite the fact that this bearing is specialized, it has a full-fledged imported analogue. Its marking is 532066DA. The weight and dimensions of both parts are identical, technical characteristics directly depend on the manufacturer and country of production.

Another analogue can be considered a double-row roller bearing with the same dimensional characteristics 537907. Due to the peculiarities of its design, it has a significantly higher load capacity, but a lower maximum operating frequency.

Among the modifications of the ball bearing 256907 are products with different types of cages and different materials used for the manufacture of plugs.

Wheel bearing VAZ 2110, 2111, 2112

Front wheel wheel bearing

Designations:

1. For VAZ - 21080-3103020-01 or 21080-3103020-02;
2. According to the classification of the bearing plant (GPZ) - 6-256907 AKE12L19 or 6-256907EK12.

Dimensions of wheel bearing 21080-3103020-01 for the front wheel of VAZ 2110, 2111, 2112:

1. Outer diameter D - 64 mm;
2. Inner diameter d - 34 mm;
3. Thickness B - 37 mm.

Installation location of the wheel bearing 21080-3103020-01 of the front wheel of VAZ 2110, 2111, 2112:

Rear wheel bearing

Designations:

1. For VAZ - 21080-3104020-00 or 21080-3104020-01 or 21080-3104020-02;
2. According to the classification of the bearing plant (GPZ) - 6-256706E1S17 or 6-256706E2S17 or 6U-537906E.

Dimensions of wheel bearing 21080-3104020-00 rear wheel:

1. Outer diameter D - 60 mm;
2. Inner diameter d - 30 mm;
3. Thickness B - 37 mm.

Installation location of the wheel bearing 21080-3104020-00 for the rear wheel of VAZ 2110, 2111, 2112:

Stories from our readers

“Fucking basin. "

Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.

Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet. You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, they call it Forex. But when I started delving into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums, studying trading strategies. I tried it on a demo account, then opened a real account. To be honest, I didn’t manage to start earning money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day. I managed to get the car buy after half a year, but in my opinion this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, I have more free time for myself and my family. You’ll laugh, but I work directly on the phone)) If If you want to change your life like me, then here’s what I advise you to do right now: 1. Register on the site 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY! I also advise you to download the application to your phone, it’s much more convenient to work from your phone. Download here.

Checking the wheel bearing. There is something humming in the cabin and the hum intensifies as the speed increases. Instructions for checking bearings.

Removing the VAZ 2110 wheel bearing. It is worth noting that replacing a wheel bearing on an old car is quite difficult.

Front bearings VAZ 2110, 2111, 2112

Front strut bearing VAZ 2110, 2111, 2112

Accepted designations:

1. For VAZ - 21080-2902840-02 or 21100-2902840-00 or 21100-2902840-01;
2. According to the GPZ classification - 348702L20 or 348702K2L19 or 348702KL20.

Bearing dimensions 21080-2902840-02 front strut:

1. Outer diameter D - 52 mm;
2. Inner diameter d - 14.5 mm;
3. Thickness B - 14 mm.

Installation location of bearing 21080-2902840-02 front strut VAZ 2110, 2111, 2112:

Diameter and number of balls

Number of rolling elements in bearing 256907 – 28 pcs. These are balls of regular spherical shape with a diameter of 9.525 mm. They are made of special grades of steel (usually ShKh-15) and undergone heat treatment.

Wholesale supplies of bearings!

Flexible system of discounts depending on volume; There are certificates and passports. Own production; Complies with GOST and ISO!

Send applications for calculation: [email protected]

The separator can be steel, made by stamping from an alloy with a high carbon content (without additional designation), cast polyamide (E5), made of textolite (E1C17).

Attention! Some car enthusiasts consider bearings with cages made of plastic materials to be unreliable, but in reality this is not the case. Modern industry offers composites that are in no way inferior to conventional steel.

Generator bearing VAZ 2110, 2111, 2112

Generator rear bearing

Accepted designations:

1. According to the GPP classification - 80202.

Bearing dimensions 80202 rear generator support:

1. Outer diameter D - 35 mm;
2. Inner diameter d - 15 mm;
3. Thickness B - 11 mm.

Installation location of bearing 80202 of the rear support of the VAZ 2110, 2111, 2112 generator:

Generator front bearing

Accepted designations:

1. According to the GPP classification - 80302 (6302).

Bearing dimensions 80302 front generator support:

1. Outer diameter D - 42 mm;
2. Inner diameter d - 15 mm;
3. Thickness B - 13 mm.

Installation location of bearing 80302 (6302) of the front support of the VAZ 2110, 2111, 2112 generator:

Symptoms of failure

We replace the bearing when the following symptoms appear:

1. Noise and knocking noise in the front hub.
2. Severe play on the bearing.
3. Leakage of grease from under the bearing seal.
4. Mechanical damage to the unit.

Release bearing 2110, 2111, 2112

Accepted designations:

1. For VAZ - 11110-1601182-00 or 21090-1601182-00;
2. According to the GPZ classification - 6-520806KECHS30 or 76-520806К1УL20Ш1.

Dimensions of release bearing 21090-1601182-00:

1. Outer diameter D - 55 mm;
2. Inner diameter d - 31 mm;
3. Thickness B - 19 mm.

Installation location of release bearing 21090-1601182-00 VAZ 2110, 2111, 2112:

Popular manufacturers

The production of these ball bearings is established at several domestic enterprises. These are: Saratov SPZ, Vologda 23 GPP (VBF) and Samara SPZ-4. There are products labeled Kursk 20 GPZ; most likely, these are goods from storage.

The range of imported products of the same standard size is extremely wide. Products bearing the FAG, SKF, SNR and KOYO marks can be considered the best in all respects.

Do you have any questions about bearing 256907 or something to add? Then write to us about it in the comments, this will make the material more complete and accurate.

Wholesale supplies of bearings!

Flexible system of discounts depending on volume; There are certificates and passports. Own production; Complies with GOST and ISO!

Source

Bearing of the input shaft VAZ 2110, 2111, 2112

Transmission input shaft front bearing

Accepted designations:

1. For VAZ - 21080-1701031-01 or 21080-1701031-02 or 21080-1701031-03 or 21080-1701031-04;
2. According to the GPZ classification - V66-42205AEM1SH1 or 6-42205A1EUSH1 or 6-42205A1E1USH1 or 6-42205A1E1USH1.

Dimensions of the front bearing 21080-1701031-01 of the gearbox input shaft:

1. Outer diameter D - 52 mm;
2. Inner diameter d - 25 mm;
3. Thickness B - 15 mm.

Installation location of the front bearing 21080-1701031-01 of the input shaft of the VAZ 2110, 2111, 2112 gearbox:

Rear gearbox input shaft bearing

Accepted designations:

1. For VAZ - 21080-1701033-00 or 21080-1701033-01 or 21080-1701033-02 or 21080-1701033-03;

Dimensions of the rear bearing 21080-1701033-00 of the gearbox input shaft:

1. Outer diameter D - 62 mm;
2. Inner diameter d - 25 mm;
3. Thickness B - 17 mm.

Installation location of the rear bearing 21080-1701033-00 of the input shaft of the VAZ 2110, 2111, 2112 gearbox:

Bearings for the secondary shaft of the VAZ 2110, 2111, 2112 gearbox

Front bearing of the secondary shaft of the gearbox

Accepted designations:

1. For VAZ - 21080-1701180-01 or 21080-1701180-02 or 21080-1701180-03 or 21080-1701180-04;
2. According to the GPZ classification - 6-42305AEUSH1, 6-42305AE1USH1, V26-42305AEMSH1, 6-42305AE1USH1.

Dimensions of the front bearing 21080-1701180-01 (6-42305) of the secondary shaft of the gearbox:

1. Outer diameter D - 62 mm;
2. Inner diameter d - 25 mm;
3. Thickness B - 17 mm.

Installation location of the front bearing 21080-1701180-01 (6-42305) of the secondary shaft of the VAZ 2110, 2111, 2112 gearbox:

Rear gearbox secondary shaft bearing

Accepted designations:

1. For VAZ - 21080-1701033-00 or 21080-1701033-01 or 21080-1701033-02 or 21080-1701033-03;

Dimensions of the rear bearing 21080-1701033-00 of the secondary shaft of the gearbox:

1. Outer diameter D - 62 mm;
2. Inner diameter d - 25 mm;
3. Thickness B - 17 mm.

Installation location of the rear bearing 21080-1701033-00 of the secondary shaft of the VAZ 2110, 2111, 2112 gearbox:

Steering bearing VAZ 2110, 2111, 2112

Steering column bearing VAZ 2110, 2111, 2112

Accepted designations:

1. According to VAZ classification - 21080-3401120-01 or 21080-3401120-02 or 21080-3401120-03;

Steering column bearing dimensions 21080-3401120-01:

1. Outer diameter D - 37 mm;
2. Inner diameter d - 21.65 mm;
3. Thickness B - 11.5 mm.

Installation location of the steering column bearing 21080-3401120-01 VAZ 2110, 2111, 2112:

Upper steering gear bearing

Accepted designations:

1. According to VAZ classification - 21080-3401123-00 or 21080-3401123-01 or 21080-3401123-02;
2. According to the designation GPZ - ,80-903E.

Dimensions of the upper bearing 21080-3401123-00 of the VAZ 2110, 2111, 2112 steering gear:

1. Outer diameter D - 35 mm;
2. Inner diameter d - 17.7 mm;
3. Thickness B - 8 mm.

Installation location of the upper bearing 21080-3401123-00 of the VAZ 2110, 2111, 2112 steering gear:

Steering gear lower bearing

Accepted designations:

1. According to VAZ classification - 21100-3401104-00 or 21100-3401104-01;
2. By designation GPZ - 1-SK152112E, NK 1512 V

Dimensions of the lower bearing 21100-3401104-00 of the VAZ 2110, 2111, 2112 steering gear:

1. Outer diameter D - 35 mm;
2. Inner diameter d - 17.7 mm;
3. Thickness B - 8 mm.

Installation location of the upper bearing 21080-3401123-00 of the VAZ 2110, 2111, 2112 steering gear:

Differential bearing 2110, 2111, 2112

Accepted designations:

1. According to VAZ classification - 21080-2303036-01, 21080-2303036-02 or 21080-2303036-03;
2. According to the designation of the GPZ - 6U-7207AK, 6U-7207AK1

Dimensions of bearing 21080-2303036-01 differential VAZ 2110, 2111, 2112:

1. Outer diameter D - 72 mm;
2. Inner diameter d - 35 mm;
3. Thickness B - 18.25 mm.

Installation location of bearing 21080-2303036-01 differential VAZ 2110, 2111, 2112:

Diameter and number of balls

The rolling elements of this bearing are placed through a special groove. Balls with a diameter of 9.525 mm are used as moving elements of the product. In the space between the clips they are placed in two rows, the total number per unit is 28 pcs.

The balls are held at specified positions using a separator. Its task is to position the rolling elements, but not to interfere with their free rotation.

Wholesale supplies of bearings!

Flexible system of discounts depending on volume; There are certificates and passports. Own production; Complies with GOST and ISO!

Send applications for calculation: [email protected]

There are ball bearings 256706 with a cage made of steel (without additional designation) and plastic materials: textolite (E, E1, E2) and polyamide (E9).

These features significantly affect the characteristics of a particular product, and therefore, before buying a replacement, you should learn more about the pros and cons of a particular separator.

Important! The use of composite materials for the manufacture of wheel bearing cages can significantly reduce their weight without compromising consumer characteristics. In addition, if such parts fail, they do not create solid debris that can aggravate the situation.

Timing belt tensioner bearing

Accepted designations:

1. According to VAZ classification - 21080-1006120-00, 21120-1006120-00, 21120-1006120-01, 21120-1006135-00, 21120-1006135-01;

Dimensions of bearing 21080-1006120-00 of the timing belt tensioning mechanism VAZ 2110, 2111, 2112:

For 21080-1006120-00:

1. Outer diameter D - 63 mm;
2. Inner diameter d - 10.1 mm;
3. Thickness B - 27 mm.

Or for 21120-1006120-00, 21120-1006120-01, 21120-1006135-00, 21120-1006135-01:

1. Outer diameter D - 63 mm;
2. Inner diameter d - 10.1 mm;
3. Thickness B - 32.4 mm.

Installation location of bearing 21120-1006120-00 of the timing belt tensioning mechanism VAZ 2110, 2111, 2112: