Technical information VAZ / Bogdan / 2110 / 2111 / 2112

Vehicle identification numbers

Location of identification numbers in the engine compartment:

1 — vehicle identification number; 2 - summary plate with vehicle nameplate data; 3 — engine number (at the end of the cylinder block under the thermostat housing)

According to existing legislation, each vehicle has an identification number (VIN code).

This number is recorded in
the vehicle passport (PTS).
The identification number and other passport data of the vehicle are indicated in the summary plate.

Summary plate:

1 — number for spare parts (corresponds to the serial number of the car that came off the assembly line); 2 — vehicle type approval number; 3 — identification number (XTA — manufacturer code; 211240 — car model; 6 — year of manufacture; last seven digits — body number); 4 — engine model; 5 — load on the front axle; 6 — load on the rear axle; 7 — codes of vehicle version and configuration; 8 - total permissible weight of the vehicle; 9 - total permissible weight of the vehicle with trailer.

Note. The model year of manufacture can be indicated by a number or a letter of the Latin alphabet (see Table 1.1).

Table 1.1. Symbols for the year of manufacture

An identification number

stamped on the body in two places: in the engine compartment on the amplifier (support cup) of the right mudguard.

. and on the luggage compartment floor reinforcement next to the spare wheel mounting bracket.

The engine number is stamped on the end of the cylinder block above the clutch housing (under the thermostat housing).

To read the number, you must remove the air filter housing.

Note. The model year may not be the same as the calendar year.

Source

Decryption features

The information table and VIN code of a VAZ car allows you to find out the following information:

• the manufacturing plant where the vehicle was produced;
• model;
• body number;
• year of issue;
• maximum permissible weight;
• engine model (the technical features of the “ten” will depend on it);
• the maximum weight that is allowed for the car together with the trailer;
• numbers of original spare parts installed initially;
• load allowed on the axles used (must be indicated separately, because the permissible value is different);
• modification;
• car version.

The Lada 2110 model is designated by a letter of the Latin alphabet or a number. All information specified above must be placed on the certificate issued for the vehicle.

Currently, the VIN number consists of 17 characters; designations that are used to separate information are stamped in the form of five-pointed stars. Each character must have a height of up to 0.1 mm.

On the “ten”, the engine number is applied using the impact method, which allows you to maintain ease of reading information for a long time. Considering the location of the engine number, body number and VIN code on the Lada, it will not be a problem for experienced drivers to find out complete information about the vehicle.

Identification numbers of cars of the VAZ-2110 family.

Identification numbers of cars of the VAZ-2110 family.

The vehicle identification number (VIN) is stamped on the right cup of the telescopic strut support.

Also stamped on the luggage compartment floor reinforcement (number shown by arrow, spare wheel removed).

Vehicle data is given on the plate attached to the right cup of the telescopic strut support.

The engine number is stamped on the cylinder block above the flywheel (for clarity, the gearbox has been removed).

An example of car data designation.

XTA – manufacturer code; 211040 – car model; 5 – model year of the car (here – 2005); 0819624 – body number; 21124 – engine model; 1515 kg – permissible weight of the car with trailer; 1-780 kg – load on the front axle (780 kg); 2-780 kg – load on the rear axle (780 kg); 0810206 – number for spare parts; Н02 – execution option; 011 – modification.

Source

Engine number VAZ 2112

Finding a table with engine data designation often requires a lot of time and effort for novice car enthusiasts. This is due to the fact that the metal is covered with a thick layer of dirt or changes under the influence of corrosion. Constant exposure to external factors is considered dangerous, because they lead to corrosion of the metal used or serious contamination. Visual perception of the number becomes impossible without prior preparation. It is often necessary to pre-clean the table.

Advice! Usually, cleaning measures are carried out before checking. To do this, use a metal brush and a special cleaning agent. After the preliminary procedure, it becomes easier to read the symbols to resolve vehicle-related issues.

The engine number on a VAZ 2112 can be seen after removing the air filter of the power unit. Two rows of digital designations (model and serial number) are traditionally stamped on the unit block.

Currently, the engine number is taken into account when a traffic police inspector becomes suspicious. The main information is the VIN code. Engine and body data are taken into account selectively, as this is due to the weakening of the current legislation of the Russian Federation. Inspectors try to look at license plates on older vehicles or in specific situations.

What to do if the engine is dirty and the license plate is not visible

In unfavorable operating conditions of the vehicle, the engine becomes dirty. The inscriptions become invisible if you do not clear them. Rust eats away the metal to such an extent that the embossed information turns into a mess of incomprehensible symbols.

If the car's engine code or data plate is simply dirty, then you need to take a metal brush and clean the dirty area. If the dirt does not come off, then it is necessary to use acetic acid or an alcohol solution. WD 40 often becomes a car owner’s assistant in overcoming dirt and rust. Use a WD-ashka to remove dirty deposits.

To prevent corrosion, it is necessary to lubricate the surface with the symbols with lithol. Many will say that then dust will stick to it faster. But lithol will save you from rusting and eating important symbols.

Location of VAZ 2112 engine number

The following tables are located in the engine compartment:

• identification code;
• summary table with vehicle passport data;
• engine number.

At the legislative level, it is determined that the VIN of the VAZ 2112 is basic information.

Fact! The VIN code is recorded in the vehicle passport.

The code combination is stamped in the engine compartment on the mudguard amplifier. They are looking for her on the right side.

VIN is deciphered as follows:

• initially there are three - the index of the automobile manufacturer: continent of production (X - Europe), country (T - Russia), automobile is encrypted in the letter A);
• the next six digits are the car model (in this case, VAZ 2112);
• then comes a Latin letter symbolizing the model year of the vehicle;
• the last digits are a symbol of the car body number.

The summary plate is also important. It encrypts basic information about the released VAZ 2112:

• number for spare parts (the number corresponds to the serial number of the vehicle produced);
• vehicle approval data;
• identification code;
• model of the installed engine;
• permissible axle load: front and rear (indicated separately in the appropriate order);
• technical version and equipment used for the vehicle;
• weight of the vehicle with an installed trailer, permitted by technical parameters;
• the weight of the vehicle that is permitted for safe movement.

The model year of a vehicle is indicated by numbers and Latin letters. In other cases, there is a direct connection of numbers and letters to the corresponding information.

What to do if the number is unreadable

If the VAZ 2110 engine number is not readable, you should contact the traffic police. Employees will order an examination. The procedure itself is free. But experts should be paid for their work.

Similar article Technical characteristics and reviews of the Gazelle Evotek engine

A similar problem is often encountered when removing or registering a car. But, if the car owner independently noticed that his license plate has rotted, he should contact the traffic police.

The examination procedure consists of the following steps:

1. Employees will check to see if the number is truly unreadable. Then they will give you a ticket.
2. According to the date specified in the coupon, the car owner will need to come for the procedure.
3. Experts will come and remove all the parts from under the hood to make the job easier.
4. For about an hour they will lubricate the rotted number with various reagents in order to find at least some clue.
5. They will take photographs of the place where the encoding is located from different angles. Then they will compare photos and try to read the engine code.

If you still manage to read the engine coding after exposure to chemical reagents, then the car owner will write this number in the vehicle’s technical passport. Now it must be lubricated with lithol so that it does not rot completely after exposure to chemical reagents.

Attention! The procedure time can be extended to a month or even two months. Not all employees do their jobs as expected. Therefore, the car owner needs to call the traffic police on his own once a week to find out how the matter is progressing with determining the encoding of the VAZ 2110 engine.

If the number has completely rotted, then it will take experts about half a month to check. When it is determined that the car is not registered as stolen, when they can determine the actual engine number, it will also be registered in the car owner’s title. The passport will indicate that the encoding has rotted naturally.

If it turns out that the VIN code is different, then a criminal case may be opened. What to do if the engine identification code is broken is written in the block above.

Ways to clear a table

Number tables often become dirty and corroded. Do not use coarse sandpaper for cleaning. The exception is very fine sandpaper (2500 - 2000).

Gasoline is often used to clean the table. The printed information will become more contrasting over time. For convenience and speed of the procedure, a dish sponge is usually used. When cleaning, be careful to preserve the metal. When the engine, car body, or VIN tables are corroded, problems often arise and more time is required to carry out registration procedures.

Car body and engine numbers, VIN code - basic information identifying the vehicle. Number combinations must match the data in the documents.

Technical information

dimensions

Engine compartment layout

1. Adsorber.
2. Generator.
3. Decorative engine cover.
4. Intake manifold (on engine 21124 the intake manifold is plastic).
5. Throttle valve assembly.
6. Brake system reservoir.
7. Cooling system expansion tank.
8. Washer reservoir.
9. Accumulator battery.
10. Air filter.

Identification information

The vehicle identification plate is located under the hood on the suspension strut shell on the front passenger side.

identification plate:

1. Identification plate:
2. Number for ordering spare parts.
3. Manufacturer.
4. Engine model.
5. Execution option.
6. Equipment option.
7. Rear axle load.
8. Front axle load.
9. Permitted maximum weight of the vehicle with trailer.
10. Permitted maximum vehicle weight.
11. An identification number.

The vehicle identification number is a combination of seventeen alphanumeric characters (for example: XTA21103020528829), which are deciphered as follows:

• The first three letters (XTA) are the manufacturer's index. The first symbol is the geographical area (X – Europe); the second is the country (T – Russia); the third is the manufacturing plant (A – JSC AVTOVAZ).
• The next six digits (211030) are the car model.
• A letter of the Latin alphabet or a number (2) is the code of the model year of the car.

• The last seven digits (0528829) are the body number.

The body identification number is stamped under the hood on the strut cup on the front passenger side.

Note

: The body identification number is duplicated on the floor of the luggage compartment next to the spare wheel mounting bracket.

The engine number is stamped on the end of the cylinder block under the thermostat housing. In order to read it, you need to remove the air filter or use a mirror.

Note

: For clarity, the engine has been removed.

Source

The engine number for the hatchback is 2112 3 doors: 1 6 – 89 hp and 1 8 – 120

On eight-valve engines, the corresponding markings are applied on a flat panel, directly next to the thermostat. To gain access to the inscription, the driver will need to remove the air filter - this will allow access to the required area of ​​the engine.

Next you need to use a special cleaner and a metal brush. The socket is located in a place that is highly susceptible to contamination and sludge formation.

Where is the VIN number for the VAZ 2110

Location of identification numbers in the engine compartment: 1 – vehicle identification number; 2 – summary plate with the vehicle’s passport data; 3 – engine number (at the end of the cylinder block under the thermostat housing)

According to existing legislation, each vehicle has an identification number (VIN code).

This number is recorded in the vehicle passport (PTS).

The identification number and other passport data of the vehicle are indicated in the summary plate.

Summary plate: 1 – number for spare parts (corresponds to the serial number of the car that came off the assembly line); 2 – vehicle type approval number; 3 – identification number (XTA – manufacturer code; 211240 – car model; 6 – year of manufacture; last seven digits – body number); 4 – engine model; 5 – load on the front axle; 6 – load on the rear axle; 7 – codes of vehicle version and configuration; 8 – total permissible vehicle weight; 9 – total permissible weight of the vehicle with trailer.

The model year of manufacture can be indicated by a number or a letter of the Latin alphabet (see Table 1.1).

Table 1.1. Symbols for the year of manufacture

What awaits a motorist with a rusty license plate?

From January 2022, car owners are required to apply special police markings to the body or frame of the car if the original VIN number is rotten or difficult to read. Previously, because of this, the car owner had difficulties selling the car and registering it with the traffic police. The new Government resolution eliminates this problem.

Why do you need a VIN number?

Cars differ from each other not only by make and model, but also by VIN code, which is a unique number of the car. It usually consists of 17 characters, letters and numbers. Each vehicle must have at least one unique identification number. Moreover, it is applied to the frame or part of the body, which simply cannot be replaced.

This code is entered in the vehicle passport (PTS), in the MTPL insurance and in the vehicle registration certificate (SRC). In the future, this will allow law enforcement officers to quickly establish the entire history of the car. A VIN check will show whether the car is under arrest or pledged, whether there are restrictions on registration with the traffic police, how many owners it has had, whether it has been in an accident and whether it is listed as stolen. Therefore, an unreadable or interrupted VIN number resulted in serious problems for the car owner.

“Then the rules were changed, allowing cars with rotten VIN numbers to be registered after passing a forensic examination,” said the deputy. “True, this was also a half-measure.”

If the check did not reveal anything illegal, the owner was given a special paper certifying that the number was lost or partially lost naturally. At the same time, a refusal to initiate a criminal case for falsifying a vehicle identification number was issued, and a photo with a readable part of the number was inserted into the vehicle title.

With this “indulgence,” the driver continued to drive until corrosion, after some time, destroyed, say, another digit of the license plate. And the procedure had to be done again.

“This is a waste of time and nerves for the owner, as well as an endless distraction of the efforts of the employees conducting these checks,” explained Vyacheslav Lysakov. “The Government decree, which approved the possibility of installing a special police marking on a car from January 2022 to replace the rotten one, actually puts an end to the ordeal of owners of old cars.”

Where is the VAZ-2112 16 valve engine number: photo, video

Car: VAZ-2112. Asked by: Denisov Roman. The essence of the question: Where can I find the engine number for a VAZ-2112?

Good afternoon I have the following question: where is the engine number on the VAZ-2112? I want to buy a car second hand and I want to check all the data with the documents. Please tell me!

Location of the engine number on the VAZ-2112

It happens that unknowing car enthusiasts are able to spend more than one hour under the hood of a car looking for the required identification number. The thing is that during operation, some of them can become covered with a thick layer of dirt, which makes them simply unsuitable for visual perception without prior preparation.

The following two tabs change content below.

Layout of identification numbers under the hood

The photo below shows schematically where all the identification numbers are located under the hood.

The numbers indicate the location of the ID numbers.

1. The car number marking (VIN code) is located here.
2. Under the number two, all the installation passport data.
3. The engine number is located under the thermostat housing, on the cylinder block. For convenience, you will have to move the air filter housing to the side.

In order to check the engine number, you need to have a wire brush and WD-40 on hand in advance to make it easier to read dirty or corroded symbols.

VIN code

The vehicle identification number, in addition to being on the support cup under the hood, is also stamped in the niche for the spare wheel in the trunk. As a rule, they are always readable after a little cleaning with a rag.

Engine number on 16 valve

We have already written more about the engine diagram here!

They changed the thermostat and checked the engine number!

The same cannot be said about the engine number, since its location is subject to constant exposure to road salt, reagents and high moisture. To make it easier to clean and read this number, you need to remove the air filter housing with the corrugation and you will see 2 rows of numbers on the block.

Clean numbers are much easier to read.

The top row indicates the engine model, and the bottom row directly indicates its number.

Engine number on 8 valve

What to do if a replacement is refused

Unfortunately, this also happens. If you refused orally, it is recommended to apply in writing, doing it like this:

• First provide the vehicle for inspection;
• Then prepare a paper with an appeal;
• Request from the authorities a written refusal with the reasons stated in it and a seal.

We must be prepared for the fact that in most regional traffic police the ceremony of action will have to be pushed through several times. Almost always, the car owner is checked, roughly speaking, for a “sucker”, requiring an allegedly “mandatory” set of certificates. These, for example, include various certificates or documents confirming the native engine of a foreign car, prepared in the country of the manufacturer.

If the traffic police's actions proceed in this direction, the car owner will have to take risks in the name of truth. You will need to submit a statement of claim and a collection of documents to go to court.

Today, the courts are simply inundated with claims and statements regarding the replacement of the body and various elements. Considering the sad experience, the arbiters of legal affairs, unfortunately, do not dare to take the liberty of putting a final point. Citizens are denied some questions, while others are referred to an incomplete collection of documentation.

We can only wait for some progress to be made regarding the issue of replacing the body. In the meantime, to replace the pad for the number, it is better to use the services of service centers.

Engine number VAZ 2112

Finding a table with engine data designation often requires a lot of time and effort for novice car enthusiasts. This is due to the fact that the metal is covered with a thick layer of dirt or changes under the influence of corrosion. Constant exposure to external factors is considered dangerous, because they lead to corrosion of the metal used or serious contamination. Visual perception of the number becomes impossible without prior preparation. It is often necessary to pre-clean the table.

Advice! Usually, cleaning measures are carried out before checking. To do this, use a metal brush and a special cleaning agent. After the preliminary procedure, it becomes easier to read the symbols to resolve vehicle-related issues.

The engine number on a VAZ 2112 can be seen after removing the air filter of the power unit. Two rows of digital designations (model and serial number) are traditionally stamped on the unit block.

VAZ 2111 where is the body number on

Dear visitors of the “Cars” website! We will be very grateful for your comments on the video clip “VAZ 2111 where is the body number located on”; registration is not required for this. We also ask you to let us know if you have any problems playing the video.

Thanks for the answer. Now I’ll start putting the car in order. The Milky Way is a beautiful color. 

Thanks for the review, special respect for the roll bars, otherwise everything is ok on the body, and now I’ll paint the ugly bars with a sponge too. What engine do you have? And how to raise your butt like yours? 

28.11.2017 – 09:20 Alexey Pervomaisky

11/18/2017 – 14:48 Vladimir Ilyin

It’s the frameless ones that scratch, with their ends, where the plastic mask is located. And frame ones DO NOT scratch. 

08.11.2017 – 00:24 Vladimir Ilyin

10/18/2017 – 08:08 Vladimir Ilyin

The roof rails do not rust, they are aluminum. The paint is just peeling off. Aluminum falls apart from salt. 

09/19/2017 – 05:24 Vladimir Ilyin

I pour the waste into the doors and thresholds. and nothing rusts. I do this in the fall, before winter. Can you tell me how to remove the plastic plate from the back door where the wiper sticks out? 

Location of VAZ 2112 engine number

The following tables are located in the engine compartment:

At the legislative level, it is determined that the VIN of the VAZ 2112 is basic information.

Fact! The VIN code is recorded in the vehicle passport. The code combination is stamped in the engine compartment on the mudguard amplifier. They are looking for her on the right side.

VIN is deciphered as follows:

• initially there are three - the index of the automobile manufacturer: continent of production (X - Europe), country (T - Russia), automobile is encrypted in the letter A);
• the next six digits are the car model (in this case, VAZ 2112);
• then comes a Latin letter symbolizing the model year of the vehicle;
• the last digits are a symbol of the car body number.

The summary plate is also important. It encrypts basic information about the released VAZ 2112:

• number for spare parts (the number corresponds to the serial number of the vehicle produced);
• vehicle approval data;
• identification code;
• model of the installed engine;
• permissible axle load: front and rear (indicated separately in the appropriate order);
• technical version and equipment used for the vehicle;
• weight of the vehicle with an installed trailer, permitted by technical parameters;
• the weight of the vehicle that is permitted for safe movement.

The model year of a vehicle is indicated by numbers and Latin letters. In other cases, there is a direct connection of numbers and letters to the corresponding information.

How to check the engine number when purchasing a used car

To independently check the code, it is enough to study the identification table and the main documents issued for the vehicle. This may be a registration certificate or PTS. Next you need to follow this procedure:

• inspect the motor number on its body;
• correlate the symbols on the body of the power unit with the symbols indicated in the vehicle registration certificate;
• if there is none, compare the information with the number indicated in the vehicle passport;
• If we are talking about American cars, the number on the engine may not appear, in which case it must be indicated in the PTS.

Separately, it is necessary to check whether the car is listed as stolen, and whether someone has tried to rename individual combinations of symbols. It is also important that all part numbers correspond to the designations specified in the relevant documentation.

Where is the VAZ-2114 8 valve engine number: photo and video

Car: VAZ-2114. Asked by: Ivan Smirnov. The essence of the question: How to check the engine number?

Hello! Please tell me where to find the engine number on a VAZ-2114 engine? I’m planning to buy myself a car and want to know if it’s necessary to check it, because I think it’s not necessary, anyway, there’s no way to interrupt it, but my friends advise the exact opposite! I would like to hear independent commentary and advice on this matter.

The need to verify the number

The arrow indicates where to look for the engine number

Whenever you buy a car, you need to check the engine number with what is on the documents. This applies to both registration and deregistration of the vehicle. Below, we will tell you where to find the engine number on a VAZ-2114 car.

The following two tabs change content below.

The need to check the engine and body numbers, without exception, on any vehicle is primarily due to the fact that you do not purchase a stolen car.

Further, difficulties may arise if the engine is no longer original. It could have been changed, for example, removed from disassembly. And during verification, unnecessary problems will arise.

All numbers and letters indicated on the unit must completely coincide with those in the documents, excluding cases of correction. It is also necessary to pay attention to their integrity, that is, they should not have any mechanical damage.

Where can I look up the engine number on a VAZ-2114?

In total, there is one place on the car where the engine number is stamped - it is on the cylinder block on the right side, next to the thermostat, right above the clutch housing.

The engine number is clearly visible once you reach it.

The location of the number is indicated by an arrow.

Please note that in order to see it, you may need to dismantle the air filter housing, along with the pipes.

Information plate

The number is duplicated on the information plate on the right side of the front pillar, along with the engine body number, which is stamped below the spare wheel and the front pillar on the right.

Identification plate under the hood

The sign is marked with a red marker.

The above plate is intended to inform the owner about all the information about the car: year of manufacture, manufacturer, etc. As in the case of the engine and body number, pay attention to the integrity of this plate, the absence of damage or chips on it. It itself should be smooth, and have intact rivets holding it in place.

If there are traces of rust on it, then it is best to clean it so that this does not subsequently affect the general condition of the information materials.

Numbers on engines of subsequent generations of Lada cars

Where is the engine number on a VAZ?

Knowing where the car engine number is located is useful for any motorist; it is especially important to know its location when buying a car, as well as repairing and replacing the engine.

Finding the engine number on VAZ cars is not difficult, the main thing is to know where to look. On the first VAZ 2101, 2102, 2103 cars, the engine number is located on a special area of ​​the cylinder block, later on cars 2104, 2105, 2106, 2107, Niva, VAZ began to put the engine number above the oil filter. On the eighth, ninth and tenth series of VAZ cars, the engine number is printed on the top of the rear wall of the block, next to the distributor breaker.

From a verbal description, of course, it is not easy to immediately understand where the engine number is on a VAZ, so I propose to consider the location of the engine number on various car models.

Location of the engine number on VAZ 2101, 2102, 2103, 2104, 2105, 2106, 2107

Location of the engine number on VAZ 2101, 2102, 2103, 2104, 2105, 2106, 2107:

Location of the engine number on the VAZ 2107 and the latest VAZ 2104:

Location of the engine number on VAZ cars of the eighth, ninth and tenth families

Location of the engine number on VAZ 2108, 2109, 21099:

Location of the engine number on the VAZ 2110:

Location of the engine number on VAZ 2111, 2112:

Location of the engine number on VAZ 2114-2115, 2113:

Location of the engine number on VAZ Niva cars

Location of the engine number on the VAZ Niva:

Location of engine number on Chevrolet Niva:

Where is the engine number on a VAZ - video

Engine number for VAZ 2110, 2111, 2112, 2113:

where is the VAZ engine number 2110-2111-2112-2109, etc.

Problems and malfunctions: if the 2112 engine is running differently, it is adjusting differently - measure the compression, is it normal? Inspect the ignition module, high-voltage wires and spark plugs, these are the main tasks in this case. VAZ engine speed fluctuates 2112

1.5, the following should come under suspicion: throttle valve (clean), idle speed control, crankshaft position sensor, throttle position sensor (inspect, change) or not? Then the DMRV will blame. Subsequent malfunction, at idle and when driving (when changing gears), the engine , a problem in the dirty throttle valve, or in the IAC (idle speed controller), maybe TPS (throttle position sensor). Let's look further, the engine

2112 won't start, what's the reason?
1st is the starter and battery, 2nd is the ignition system, third is the power supply system, if you can’t hear the fuel pump running, check its power supply, is this a good period? Check the pressure in the fuel supply system. Another malfunction, engine , in other words, it heats up disgustingly to operating temperature, the thermostat has died, change it and drive without effort. What next, do you hear some knocking noise in the VAZ 2112 ? There is almost always a problem with the hydraulic compensators. On the contrary, they have nothing to do with it, then there is low or very high oil pressure or the connecting rod or main bearings are knocking, and of course the pistons are also knocking. In our example, it is better to go to a service center for diagnostics. It’s better to go for diagnostics and for which the design is intended when the VAZ 2112 engine pulls poorly, then you need to measure the fuel pressure in the rail, maybe it’s the injectors, maybe the filters are clogged, or maybe the clutch has just arrived. That's not all :) Can you feel the vibration of the VAZ 2112 engine? Problem with: idle speed regulator, high-voltage wires, spark plugs, lambda probe, voltage regulator, clogged injectors, incorrect ignition timing. The list is solid, so as not to guess and waste time, let’s go for diagnostics.

About LADA 2112 engines first generation (1999 - 2008)

The LADA 2112 (VAZ 2112) car, popularly nicknamed the two-wheeler, is a front-wheel drive hatchback of the 10th family, along with the VAZ 2111 station wagon, when it was created they relied on the VAZ 2110. These cars differ mainly due to the body. Thanks to the fact that the length of the car was reduced, it was possible to achieve improved steering. This fact, as well as a more attractive appearance, contributed to the popularity of the car. The low-production VAZ 21123 coupe became the most popular due to its more aggressive and sporty appearance. Since 2008, the VAZ 2112 has replaced the Lada Priora hatchback. And since 2010, they replaced the 2112 coupe by releasing the Lada Priora coupe. As part of the article, we will look at the engines that were installed on the first generation of LADA 2112 cars.

The VAZ 2112 (21103) engine can be called a qualitative evolution of the VAZ 2111 power unit. It has 16 valves and not 8 like its predecessors. The main feature of the 2112 engine compared to the 2111 is 4 valves per cylinder and 2 camshafts, due to this, a larger amount of the fuel mixture is supplied at a time, and exhaust gases are removed more quickly. In addition, compared to the 2111, the engine in question has lower fuel consumption.

The VAZ 2112 engine is in-line, injection type with four cylinders, and has an overhead camshaft, as well as a timing belt drive. If the belt breaks, the engine may bend the valves, so you need to monitor the condition of the belt. As an option, you can install pistons from the 124 engine.

The VAZ 2112 engine often trips, so you will have to measure the compression. If the cause is not identified, you should check the ignition module, high-voltage wires and spark plugs. There are problems with speed. You should check the throttle valve, idle speed control, crankshaft position sensor, throttle position sensor and mass air flow sensor. The engine may stall at idle, most likely the culprit is a dirty throttle valve or idle speed control.

If the engine stops starting, you need to look at the starter and battery, or the ignition and power systems. Due to problems with the thermostat, the engine may not warm up well or not warm up to operating temperatures at all. Engine noises and knocks may indicate problems with hydraulic compensators, connecting rod or main bearings, or pistons.

Engine 21114, which has a second index of 11183, is a development of the ideas laid down by the 2111 1.5 liter power unit. and directly, 083 motor. The engine has a taller cylinder block, increased piston stroke, and a volume of 1.6 liters. The engine has improved environmental performance and greater reliability. Compared to VAZ 2111 engines, the VAZ 11183 unit is less capricious, more elastic and high-torque.

how to determine the type of engine where the engine number is stamped

The simplest and fairly standard method to increase the power of a VAZ 2112 engine is to change the camshafts to STI-1 (for a standard receiver), STI-3.1, STI-2 or Stolnikov 8.9 (more expensive than others), to make life easier for the engine, we install a light ShPG from the 126 engine , throttle body 54-56 mm, from an outboard receiver and ejection 4-2-1. At the output we have about 120 hp. Refinement of the cylinder head and evil wide-phase shafts can increase power to 130-140 or more hp. To this it is worth adding a crankshaft with a stroke of 75.6 in order to increase the volume of the VAZ 2112 engine to 1.6 liters, lightweight T-shaped valves, modification of the cylinder head and intake manifold, at the output we get about 140-150 hp. For a small town, these characteristics are enough for almost any car owner. Installing a compressor on a VAZ 2112

compressor for vaz 2112 autoturbo

Another way to modify the 2112 engine and obtain identical power is to install a compressor. In a well-known video clip, it is clearly explained to our client what is required for the successful implementation of the project using the example of an eight-valve engine, this compressor is possibly installed on a 16-valve engine, the output of the engine will be more than 130 hp. Other compressors are also used, but blowing more than just 0.5 bar into a standard engine, without lowering the compression ratio, is risky.

To increase the stability of the engine and the response of the accelerator pedal, install 4 throttles. The essence is that each cylinder receives its own throttle valve and therefore the resonant air vibrations between the cylinders disappear. We have a more measured engine operation from bottom to top; in addition, the intake is shorter and air enters the cylinders very quickly. The most popular way is to install a 4-throttle intake from Toyota Levin on a VAZ. You need to purchase: the unit itself, make an adapter manifold and pipes, in addition to this you need a zero filter, injectors, MAP (absolute pressure sensor), fuel pressure regulator and firmware. There are also ready-made 4-throttle intake kits available for sale that are fully usable. It is recommended to install a light piston engine (from Priora, for example), because turning a languid piston is an additional waste of energy, wide-phase shafts, for example STI-6 or STI-7 Touring Light, a modified cylinder head with light valves and solid pushers, Opel C20XE springs, spider ejection 4-1, as it is also called 4-2-1 on the 51st, or better yet 63rd pipe.

Engine number 1.6 8 and 16 valves injector

Installation blocks 1 6 became higher by 2.3 mm. Due to this, the working volume has increased. The number traditionally remained in the same place. When looking at the photo under the hood, have no doubt: the placement of the markings has not changed.

Characteristics of 8-valve engine 1 6 l:

• Power - 82 hp;
• Torque - 125;
• Acceleration – 13 5 s;
• Maximum speed - 170;
• Consumption - 7 5 l.

• Power 89 hp;
• torque 131 nm;

Differences 16th grade. VAZ engines detailed review

With the correct configuration, the 2112 engine produces about 180-200 hp. To completely launch the car into space, with a volume of 1.5 liters, we install STI Sport-8 shafts. It makes no sense to write a motor configuration for such shafts; very few people decide to assemble something like this. There are such disadvantages as a reduction in the service life of the motor; all this is logical, because the engines on the pipes spin at 8000-9000 or more rpm. So constant breakdowns and frequent engine repairs 2112

The desire to inflate your own engine haunts all owners of a one and a half liter gear; how to implement tried and true methods of supercharging on your engine is described Here, at the very bottom of the article, these principles are applicable to the 2112 engine.

Source

Engine 1.5 l 8 valves carburetor

The ancestor of the ten family, well known to car enthusiasts from the eighth model Lada. Easy to maintain and repair, as a result of a thoughtful, logical layout, dozens moved under the hood, with all the features, including the location of the unit number.

The carburetor four-cylinder engine with a volume of 1 5 liters developed

• Power 72 l s (53 kW);
• torque 104 Nm;
• up to 100 km/h - 14 s.;
• Consumption - 7 6 l/100 km.