How to fold out and remove the rear seats on a Niva Chevrolet: location of the latches


To watch online, click on the video ⤵

Removing the rear seat on a Niva.
Read more How to sleep comfortably in a 3-door Niva or Read more

How to make a sleeping place in a 3-door field Read more

How to quickly make a sleeping place in a three-door field Read more

Overnight in Niva quickly. 5 minutes and I'm asleep. Without removing the rear seats NIVA 21214 2nd part Read more

Buying used NIVA part 4. Inspection of the NIVA interior. Was the car drowned or not? Read more

Modernization of the rear seat of the VAZ 21213 Niva Read more

VAZ 21213 NIVA. Installing the rear seat. More details

I bought a Niva 2121 and installed seats from a foreign car. I advise you to watch it. More details

How to spend the night together in a short Niva More details

How to fold the seats into beds on a Chevrolet Niva More details

Niva. Upgrade of the rear sofa on Niva. More details

Rear seat locks. More details

Niva Starling. Rear row and luggage compartment. #YADDRIVE Read more

SHOCK. WHAT I FOUND FOR NIVA 2121 ON ALIEXPRESS! + COMPETITION Read more

Sleeping place in Niva 2131. Shushmor, great and terrible! More details

THE REAR SEAT BACK LOCK IS BROKEN IN A CHEVROLET NIVA. THE BACK IS JAMMED. FULL REPAIR TOUR. More details

Reupholstery of the rear row of seats on Niva More details

Source

Seats

To adjust the front seats longitudinally, pull the locking lever 1 up.

After moving the seat, release the lever. The tilt of the seat back is infinitely adjustable by rotating the handle. 6.

Diagram “A” shows the layout of the front seats for relaxation. To install the child module, the passenger seat must be set to the penultimate rear position.

Do not adjust the driver's seat while driving. It may move suddenly, causing you to lose control of the vehicle.

seat lock button

This moves the entire seat forward, increasing passenger access to the rear seat.

There is a place under the driver's seat for attaching a fire extinguisher 4 using an elastic belt 5 .

The rear seat is foldable.

Passengers boarding the rear seat

Diagram “B” shows the increase in luggage compartment area:

– remove shelf 7 and tilt the backs of the front seats forward;

– press out the handles 8 of the locks of the backrest 9 of the rear seat and place the backrest on the cushion 10 (position I);

– move the folded seat to position II;

– lift the seat up and slide it back to position III;

– after loading luggage, place shelf 7 in the luggage compartment and adjust the angle of the backrests of the front seats to a position convenient for travel.

Rear seats (five-door body (VAZ-2131))

LADA 4×4 cars with a five-door body are equipped with an original transformable rear seat, which allows you to increase the luggage compartment area. The rear seat folds out when the rear doors are open.

Before folding the rear seat, the seat belt buckles must be installed in special holders on the backrest. When returning the backrest to a vertical position, you should tuck the shoulder branches of the side belts behind the special guide elements so that they do not fall behind the backrest. After returning to the working position, the seat cushion must be straightened so that it fits evenly with the backrest. After returning the seat to its working position, the buckles of all seat belts, as well as the tapes, must be removed from the holders and guides, bringing the seat belts to the user position (see figure).

WARNING! Since the rear seat cushion in the car is equipped with a dynamic lock, incomplete fixation of the seat can lead to its spontaneous reclining. The rear seat cushion must be lowered completely!

– Pull loop 3 and place the pillow in a vertical position. The hinge is located in the middle part of the seat cushion;

– by moving handle 2 to the right, release the backrest and lay it down. If necessary, move the front seats forward.

In the variant version (for a 3-door car), the rear seats are equipped with head restraints. The rear seat head restraints are height adjustable. The head restraints are adjusted up and down by directly pressing the head restraint.

How to fold out and remove the rear seats on a Niva Chevrolet: location of the latches

Car seats in all cars are primarily designed to carry passengers, thanks to their special anatomical shape and softness. However, the rear seat in tandem with the trunk can also be used as a place for transporting large cargo and other things. In this article we will take a detailed look at the design of the rear seat and the procedure for dismantling it to increase space and cargo.

Removal and installation

Just like with the front ones, there are many situations where it may be necessary to remove the seats. The most common thing besides repairs is the installation of covers. To perform this procedure, the following procedure is required:

  1. You need to empty the trunk, pull out the rubber mat, then unscrew the six nuts holding the backrests.
  2. The backrests can be removed from the seat and pulled out through the side doors.
  3. The seat cushion is raised enough so that you can unscrew the bolts securing it to the body.
  4. Assembly proceeds in reverse order.

Purpose and design of the rear seats

Rear seats view from the trunk.

The voluminous design in the form of a wide cushion for seating and a backrest with soft filling provides all passengers with a comfortable position in it.

These elements are very rigidly fixed inside the cabin, and the profile, rigid frame on the back is not only designed to increase elasticity, but also to hold the padding inside it. The backrest can be folded, increasing the space in the rear of the car.

Headrests

To make it easier to unfold or dismantle the chair, you must first remove the headrests, adjusting their position with special pins.

This is what the headrests on a Niva Chevrolet look like.

Rear seat removal process

It may be necessary to dismantle the rear seats for several reasons, such as the need to replace some parts, modernize them, install covers, or reupholster the seats in general.

Step-by-step removal procedure

  1. Open the trunk door and remove the rubber mat.

    Trunk mat and trunk itself on Niva Chevrolet.

  2. We unscrew the six nuts that secure the backrest.
  3. After this, you can take it out and start unscrewing the pillow nuts.
  4. In order to dismantle it, you need to lift the pillow up and unscrew the bolts that hold it to the floor.
  5. Installation should be done in reverse order.

How to fold out the rear seats on a Chevrolet Niva

If from all of the above it became clear to you that the entire seat can be easily removed from the interior, it can also be simply unfolded.

In order to do this, you need to find a special lock that holds it in a locking position, pull the loop and release the lock. However, before this, make sure that there is free space under the backrest; to do this, we slightly raise the backrest and move it straight to the front seat, and the backrest simply reclines, thereby providing free space for transporting all kinds of cargo.

To disassemble them, you need to pull the latches.

After you have laid out the entire structure, make sure that all locks are securely fastened.

This is what a folded sofa looks like.

What to do if the backrest lock is broken?

Owners of the Niva Chevrolet from time to time complain about such an unpleasant situation as the failure of the backrest lock. Despite the fact that the price barely exceeds 100–150 rubles, a breakdown at the most inopportune moment will leave the most unpleasant sensations. Therefore, it is sometimes worth paying increased attention to this part, and at the slightest sign, replace it, and this is done as follows:

The bolts are marked with a marker.

Installing head restraints

Headrests provide a more comfortable fit. This is especially true for long trips. As a rule, they have an L-shape, which allows you to select the optimal height position and, when recessed, are almost completely hidden without obstructing the driver’s view. But, unfortunately, at the moment they are not available in minimum configurations.

If necessary, they can be purchased separately. The standard headrest has two pins that are inserted into corresponding holes in the backrest. The pins have special notches that allow them to be fixed in height.

How to fold the rear seats of a Chevrolet Niva

Car seats in all cars are primarily designed to carry passengers, thanks to their special anatomical shape and softness. However, the rear seat in tandem with the trunk can also be used as a place for transporting large cargo and other things. In this article we will take a detailed look at the design of the rear seat and the procedure for dismantling it to increase space and cargo.

Niva Chevrolet: rear seat, headrests

Car seats serve primarily as places to board and transport passengers. Thanks to their soft covering, the seats provide a comfortable ride for passengers. It's time to pay attention to such an important part of the interior of the Niva Chevrolet as the back seat. Let's consider its design, purpose and procedure for removal for repair work. We will also pay attention to the additional design of the rear seats - the headrests.

Purpose and design of the rear seats

The voluminous design in the form of a wide cushion for seating and a backrest with soft filling provides all passengers with a comfortable position in it.

These elements are very rigidly fixed inside the cabin, and the profile, rigid frame on the back is not only designed to increase elasticity, but also to hold the padding inside it. The backrest can be folded, increasing the space in the rear of the car.

Headrests

To make it easier to unfold or dismantle the chair, you must first remove the headrests, adjusting their position with special pins.

This is what the headrests on a Niva Chevrolet look like.

Design and purpose

On a Chevrolet Niva, the rear seat is a removable structure consisting of a backrest and a seat cushion. During operation of the vehicle, these two elements are rigidly fixed, which increases the perseverance of passengers when the vehicle is moving. The rigidly fixed structure has a profile frame for the back and cushion, to which a steel mesh is attached to hold the internal padding. The reverse side of the backrest design has a steel base, which is located in the luggage compartment.

The seat back has the ability to fold, thereby increasing the volume of the luggage compartment. The rear seat padding on the Chevrolet Niva consists of molded foam, which provides comfort and elasticity for seated passengers.

Main functions of the product:

So, the back seat performs not only a convenient function, but also an important one, ensuring safety while the car is moving.

Removing and installing the product

Removal of the rear seat is carried out due to repair work: replacement of a product part, modernization, installation of covers, etc. Also, sometimes this product interferes with repair work on other components, so you must first remove the seat. So, the removal procedure is as follows:

How does the rear seat back fold down?

From the above it is known that the backrest can not only be removed from the passenger compartment, but also folded, thereby increasing the volume in the luggage compartment. To fold the back of the rear seat, you need to find the lock that locks it in a stationary state and pull the loop to release the latch. But before this, space is first cleared to place the backrest: the seat cushion is raised slightly upward and moved forward to the front seat. Further, the backrest folds completely freely and provides space for transporting cargo in a Niva Chevrolet SUV. To unfold the product, you simply need to recline the backrest and the lock itself will lock it in the desired position, and return the pillow in the same way to its original position.

Important! It is imperative to ensure the quality of the lock’s fixation after the structure has been unfolded.

Broken back lock

Very often, Niv Chevrolet owners complain about the short service life of the backrest lock. Although the design of this product is primitive, and it costs around 50-100 rubles, it is still not very pleasant to discover such a breakdown at the wrong time. The fact is that this lock is made of low-quality steel and plastic, which become unusable after a while. What to do about it? The best option is to replace the lock. This is done as follows:

Backrest lock design

Headrests are one of the components of the rear seat back of a Chevrolet Niva SUV. They are designed to fix the passengers' heads, that is, to create complete comfort while driving. It is worth noting that not all Chevy Nivas are equipped with such a product, but only cars in some trim levels. The headrests are L-shaped, which allows them to be recessed into the seat when there are no passengers. They also have special pins with three notches that allow you to adjust their position (higher/lower).

The Chevrolet Niva has two headrests, located on the left and right. The headrest is not placed in the middle, as it will interfere with the driver’s view in the rearview mirror.

So, concluding the above, it is worth noting the need for rear seats and their benefits. When there is a need, the backrest can be easily folded, thereby adding free space in the trunk of the car. The presence of a lock makes the seat easy to control, and the headrests make it more comfortable for passengers in the back seat, although only for two!

Is your Shniva reliable?

How to fold out the rear seats on a Chevrolet Niva

If from all of the above it became clear to you that the entire seat can be easily removed from the interior, it can also be simply unfolded.

In order to do this, you need to find a special lock that holds it in a locking position, pull the loop and release the lock. However, before this, make sure that there is free space under the backrest; to do this, we slightly raise the backrest and move it straight to the front seat, and the backrest simply reclines, thereby providing free space for transporting all kinds of cargo.

After you have laid out the entire structure, make sure that all locks are securely fastened.

What to do if the backrest lock is broken?

Owners of the Niva Chevrolet from time to time complain about such an unpleasant situation as the failure of the backrest lock. Despite the fact that the price barely exceeds 100–150 rubles, a breakdown at the most inopportune moment will leave the most unpleasant sensations. Therefore, it is sometimes worth paying increased attention to this part, and at the slightest sign, replace it, and this is done as follows:

    The old lock must be dismantled by first removing two bolts from its body.

Backrest lock repair

According to reviews from Chevrolet Niva owners, the rear seat back lock of these cars very often fails. This is a fairly simple device that costs no more than 100 rubles, but it always breaks down at the most inopportune moment. The main reason for failure is the use of low-quality materials in manufacturing. If problems arise, replace:

  1. We need to get the old lock. If it breaks when the backrest is unfolded, you will have to apply force to unlock it. To do this, you need to remove the trim from the lock side and unscrew the brackets.
  2. The device is pulled out of the seat
  3. To avoid unscrewing a jammed seat, you can try to knock out the lock. To do this, you need to kick the seat from the trunk side. The method is more radical, but fast and effective.

conclusions

To sum up all of the above, we can confidently say that in order to make more space in the back seat of a Niva Chevrolet, you don’t need much experience, the main thing is to carefully read our article.

I often have to go on business trips for work, but it’s not always possible to rent a room or a hotel room, so I often have to spend the night in the car. But sleeping in a Chevrolet Niva is not very comfortable, because the seats do not fully recline. In the morning my back hurts as if I had been loading cars all night. But to finalize it, we only need five minutes of time, no more. I tried to sleep on the back sofa, but it’s the same story, you have to bend over backwards, so you can’t get enough sleep.

At first I wasn’t happy with the heating in the car, it was using a lot of gasoline, but it was of little use, and it was still cool in the car. I completely changed all the seals, then changed the thermostat, then replaced the heater radiator. Now we need to modify the seats. For work we need a regular cutting board. However, my wife refused to give it to me, because then she would leave me without breakfast, lunch, and, at the same time, without dinner. So we buy a new cutting board.

After this, we move the seats as far forward as possible and remove the headrests. After this, we lower the back of the seat along the board, and at the same time raise the chair cushion. What else? And nothing else is needed, the modification of the front seats is completed, you can immediately experience the result for yourself.

We also don’t leave the rear sofa without attention. We take a 13-size wrench plus a screwdriver with a reversible head, onto which we place the 13-size head. If you don’t want to suffer in the future, then I recommend replacing the regular nuts with wing nuts, so that later you don’t need a wrench, you can unscrew them with your bare hands.

We put the back of the sofa in the luggage compartment, and fill the voids that remain in the gap between the seats with some material; I personally put clothes there.

Here you have a full-fledged double bed, on which you can not only sleep, if you know what I mean. The smaller back of the sofa fits on the front right seat. On a long journey I take a blanket with me, with it you can generally feel like you are in your bed at home.

Chevrolet Niva 2005, 87 l. With. - accessories

What to do about it? The best option is to replace the lock. Remove the old jammed lock. If it is stuck in the unfolded position, then you will need to apply some physical force and hit the back, preferably with your foot through the trunk.

You can remove the device in another way: The first method is effective and fast, and the second is reliable, but slow. Next, the device is removed from the seat structure and a new one is purchased.

Very rarely do situations arise when car owners are faced with the need to remove seats. But in some cases it is simply necessary - for example, to replace carpet, to put covers on Niva Chevrolet seats, to install heated seats. It is best to perform these operations with the seats removed to gain the necessary access. Removing the front seats is performed in the following order:

Chevrolet Niva | Reclining seats | Chevrolet Niva

Niva Chevy. The lock of the rear seat back is jammed. Disassembly

In order to do this, you need to find a special lock that holds it in a locking position, pull the loop and release the lock.

On a Chevrolet Niva, the rear seat is a removable structure consisting of a backrest and Important!…

To disassemble them, you need to pull the latches. This circumstance allows you to freely use the work, while respecting personal non-property rights - the right of authorship, the right to a name, the right to protection from any distortion and the right to protect the author's reputation - since these rights are protected indefinitely.

As a rule, they have an L-shape, which allows you to select the optimal height position and, when recessed, are almost completely hidden without obstructing the driver’s view.

Video instructions: how to fold out the rear seat of a Chevrolet Niva

Owners of Niva Chevrolet from time to time complain about such an unpleasant situation as the failure of the backrest lock. Despite the fact that the price barely exceeds rubles, a breakdown at the most inopportune moment will leave the most unpleasant sensations. Therefore, it is sometimes worth paying increased attention to this part, and at the slightest sign, replace it, and this is done as follows: The old lock must be dismantled, having first unscrewed two bolts from its body.

Next, loosen its clamps and remove it from its seat. We insert the new part in the same order as removal. Conclusions Summarizing all of the above, we can say with confidence that in order to make more space in the back seat of a Chevrolet Niva, you don’t need much experience, the main thing is to carefully read our article.

After this, using a 8 key, unscrew the rear seat fastenings.

Shniva. How to organize a sleeping place in a Chevrolet Niva. Chevrolet Niva.

Then the bolts of the slide located in the middle part are unscrewed. A spring washer will be located under it. After this, you can remove the seat from the passenger compartment and, if necessary, dismantle or repair the front slide of the Chevrolet Niva. In order to remove the slide, you need to unscrew the bolt that secures it to the seat. Now you can unscrew the rear bolt securing it to the seat. If necessary, the slides can be lubricated or replaced with new ones.

This is where the removal work ends. To install the front seats of the Chevrolet Niva in place, you must perform all the steps in reverse order. They are used primarily for boarding and transporting passengers. The rear seat is wide and soft enough to provide comfortable seating for three people. But periodically the mechanism requires repair.

Before folding the rear seats on a Chevrolet Niva and removing them, you need to study the design in detail and understand the purpose of all components. We should also pay attention to the installation of head restraints in the rear seats.

The rear seats of the Chevrolet Niva consist of 2 components - the seat and the backrest. You can remove the cushion and carry out the appropriate repair measures.

Installation of the product is carried out in the same order, only in reverse order. How does the rear seat back fold down?

From the above it is known that the backrest can not only be removed from the passenger compartment, but also folded, thereby increasing the volume in the luggage compartment.

Design and purpose

On a Chevrolet Niva, the rear seat is a removable structure consisting of a backrest and a seat cushion. During operation of the vehicle, these two elements are rigidly fixed, which increases the perseverance of passengers when the vehicle is moving. The rigidly fixed structure has a profile frame for the back and cushion, to which a steel mesh is attached to hold the internal padding. The reverse side of the backrest design has a steel base, which is located in the luggage compartment.

The seat back has the ability to fold, thereby increasing the volume of the luggage compartment. The rear seat padding on the Chevrolet Niva consists of molded foam, which provides comfort and elasticity for seated passengers.

Main functions of the product:

So, the back seat performs not only a convenient function, but also an important one, ensuring safety while the car is moving.

Removing and installing the product

Removal of the rear seat is carried out due to repair work: replacement of a product part, modernization, installation of covers, etc. Also, sometimes this product interferes with repair work on other components, so you must first remove the seat. So, the removal procedure is as follows:

How does the rear seat back fold down?

From the above it is known that the backrest can not only be removed from the passenger compartment, but also folded, thereby increasing the volume in the luggage compartment. To fold the back of the rear seat, you need to find the lock that locks it in a stationary state and pull the loop to release the latch. But before this, space is first cleared to place the backrest: the seat cushion is raised slightly upward and moved forward to the front seat. Further, the backrest folds completely freely and provides space for transporting cargo in a Niva Chevrolet SUV. To unfold the product, you simply need to recline the backrest and the lock itself will lock it in the desired position, and return the pillow in the same way to its original position.

Important! It is imperative to ensure the quality of the lock’s fixation after the structure has been unfolded.

Broken back lock

Very often, Niv Chevrolet owners complain about the short service life of the backrest lock. Although the design of this product is primitive, and it costs around 50-100 rubles, it is still not very pleasant to discover such a breakdown at the wrong time. The fact is that this lock is made of low-quality steel and plastic, which become unusable after a while. What to do about it? The best option is to replace the lock. This is done as follows:

Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]