Parameters of stamped wheels for the VAZ 2114 car


The VAZ 2114, which is a restyling of the iconic car of the 90s of the last century - the “nine”, was produced in Russia for 12 years - from 2001 to 2013, and during this period won the hearts of hundreds of thousands of Russians. Even today, on the roads of the country you can find this car in good condition, and often with tuning to suit the taste preferences of its owner. Of course, all mechanical parts sooner or later become unusable, and the driver needs to replace the disks for his “iron horse”. Many wheel manufacturers offer potential buyers a wide range of these products for the fourteenth Lada model.

Wheels for VAZ 2114

Restyling of the VAZ 2109 from 2001 took place only in some parts of the body, so the entire base, including the suspension, wheel arches, hubs, etc., remained untouched. Therefore, the wheels on the VAZ 2114 that the manufacturer equipped its cars with were also the same.


VAZ 2114

In the simplest configuration with a 1.5 liter engine, the car came off the assembly line with 5.5J x 13 ET35 wheels, which corresponded to a radius of 13 inches and was suitable for high-profile tires with parameters 175/70/R13 and a bolt pattern of 4x98, and the drill diameter was 58.6 mm.

All other modifications from later dates (since 2003 with a 1.6 liter engine and since 2007 - 1.7 liter) were equipped with 15 radius wheels. Depending on how the car was equipped with various options, the dimensions were 5.0J x 14 ET35, 5.5J x 14 ET35, 6.0J x 14 ET35, tires came with parameters 175/65/R14 and 185/60/R14. This shows that the wheel offset does not change, and its width varies within 10 mm, which does not affect the stability of the car at all. However, with a tire width of 185 mm, maneuverability in difficult road conditions became slightly better.

Important!

The listed wheel sizes for the Lada 2114 satisfied few people, both in size and in terms of visual characteristics - in simple versions the stamped wheels were simply painted in metallic color, and in more expensive versions these same products were covered with decorative plastic caps. That is why car enthusiasts have always independently replaced factory wheels with options that are more acceptable to them, up to 17 radius in cast or forged versions.


R16 wheels for VAZ 2114

Car wheels in Yekaterinburg

A car rim is one of the main components of the wheel, which is in direct contact with the car’s hub.
Choosing car wheels that are ideal for your car is not easy, since each model has its own set of different technical characteristics that must match the technical characteristics of the car. You can easily select wheels for your car in the catalog of the Express-Tire online store: you can set all the characteristics yourself - car model, wheel brand, price range, size, wheel type and other characteristics. If you have any difficulties selecting components for your car, please contact our specialists. Our managers will help you choose from the entire huge range of products exactly those wheels that will fit perfectly on your car.

What wheels are suitable for the VAZ 2114

When choosing wheels for any budget car, the fundamental criterion that motivates the purchase is the price. Expensive wheels (from 10 thousand rubles and more) on a VAZ 2114 with the same tires could amount to 25 to 30% of the price of a new car. This means that not every car enthusiast could decide on such an expensive purchase.

If we consider the parameters of the wheels on the VAZ 2114, without paying attention to the price, here you can also find a number of limiting factors, in particular:

  • First of all, the owner must know where he is going to use his car, because driving on the highway at high speeds implies the danger of using high-profile tires. A product under pressure may accidentally become deformed or even come off the wheel at too high speeds. In this regard, when operating a car on smooth asphalt, it is permissible to install tires with a profile of 55 mm or lower, which corresponds to a radius of R15-R17.
  • If a car enthusiast drives more outdoors, on dirt roads, then, on the contrary, he should leave the factory version on the car, and the replacement will only be with an increase in the width of the wheel. This is due to the fact that the side surface of the rubber also contributes slightly to traction on soft ground.
  • For the same reasons, a car enthusiast should choose winter wheels with a smaller radius, since loose snow often has the same characteristics and composition as dirt.

You may be interested in this About the original wheels on the Ford Focus (Ford Focus)


R15 wheels on Lada 2114

If we consider the color of the disc, then the market today offers a wide range of different colors with predominant black and white shades. However, the price of such products is high, and often, when purchasing cast or forged wheels, the owner simply takes them to a car tuning studio, where professionals paint them in the color of his choice. So, a black VAZ 2114 on white wheels will look very impressive on the road.

When choosing a material and method of manufacturing a disk, in addition to the price, you need to pay attention to the grille pattern of the product (the owner of the VAZ should like it), as well as to the manufacturer who guarantees the strength of the product. “Stamping” cannot have a greater thickness of steel and has less strength than “casting” or “forging”. In addition, it looks much less impressive than other wheels, but the low cost often attracts car enthusiasts, and they purchase various decorative caps made of plastic, steel or rubber to cover the unaesthetic appearance.

Important!

Experts recommend changing wheels either in pairs, that is, on the entire front or rear axle, or completely, if the driver’s budget allows for buying a set of four discs.

Drivers often have 2 sets available at once - one for the summer, with a large radius and high-quality low-profile tires, and the other for the cold season, when the radius is smaller, the profile is higher, and the tire surface is softer. Of course, these are additional costs, and not every person can afford such a step, but over 5 years of operation, tire fitting will cost the owner much less, and the procedure itself will go faster, which will allow him to compensate for the extra costs twice a year.


Alloy wheels R15 on 2114

Discs "Torus"

Wheels "Torus" R15 and the entire series have a modern design. Imported priming and varnishing, three-layer nanocoating on a special conveyor make car wheels from “KiK” almost invulnerable to UV rays and rust, wear-resistant and durable.


Discs "Torus"

Domestic is one of the leaders in the country's market among light alloy wheels. However, Torus disks are in demand not only within Russia, but also abroad. This is explained by the highest quality of wheel components, excellent design and quality of products created by the KiK brand.

Replica and original alloy wheels for cars are in demand among consumers. They are beautiful and do not require replacement for a long time. Even under difficult operating conditions, there is no need to take special care of the casting. Unlike a die, a cast replica is lightweight. This guarantees:

  • improved maneuverability;
  • improved acceleration dynamics;
  • reduction in gasoline consumption.

“Torus” wheels made of aluminum alloy are more in demand. Thanks to the special qualities of the metal from which the discs are made, the products have the highest wear resistance and protection from the aggressive action of the atmosphere. This is explained by the fact that the aluminum surface is covered with an oxide film, which creates protection. Dirt can negatively affect aesthetics, which is why the discs are varnished.

Typically, the sale of aluminum castings is carried out for certain brands of cars. In order not to cause harm, you need to study the car's instructions before purchasing rims; car rims must match the vehicle. Knowing the make of the car, as well as the year of its manufacture, you can choose car wheels that meet all the criteria. When selecting components, relying solely on the eye, you can make a mistake with labeling.

Magnesium is also used to make alloy wheels. True, such products are not so in demand. They quickly rust and are destroyed by chloride compounds used by utilities on roads in winter. Because of them, stains can form on magnesium models, and the discs will quickly begin to deteriorate.

Rules for choosing R13 wheels on a VAZ 2114

Wheels on 2114 with a radius of 13 inches, as a rule, are installed not for aesthetic purposes, but when replacing worn or damaged wheels.

Thus, it is important for VAZ 2114 owners to know the following features of this product size:

  • 95% of R13 wheels are sold only in a stamped version, and their price rarely exceeds 1.3-1.5 thousand rubles*
  • In order to cover the unpresentable exterior of the wheels, the driver is often offered wheels along with a set of caps that perfectly imitate “casting”. However, when choosing, it should be taken into account that the less perforation on a plastic or rubber product, the worse the brake system will be ventilated, which can lead to overheating and deformation.
  • The main dimension of R13 wheels for this car is 5.5J x 13 ET35, however, if desired, the driver can increase the width by 1 dimensional step - up to 5.5J.
  • Brands that produce similar products in both ventilated and basic versions are AvtoVAZ, as well as friendly domestic enterprises K&K and SKAD. It simply doesn’t make sense to consider more expensive manufacturers in the case of 13 radius in “stamping”.

Important!

The K&K and SKAD companies are large enterprises that produce inexpensive and high-quality products for VAZ drilling and bolting up to R17, and all “stamping” can be purchased from these brands, since the automaker itself trusts them.


R13 wheels for VAZ 2114

Rules for choosing R14 wheels on a VAZ 2114

Wheels with a radius of R14 are also installed at the factory, but owners change them not only when absolutely necessary, but also to improve the appearance of the car, so “cast” options are widely available on the market at an affordable price - 3-5 thousand rubles.

To choose the right wheels of this size, the owner should know some facts:

  • If the choice fell on “stamping” with hubcaps, you need to make sure that the perforations in the wheels correspond to the clips on plastic or rubber products, otherwise the hubcaps simply will not fit and they will have to be secured with cable ties.
  • It is best to choose ventilated wheels, that is, those that have a sufficient amount of perforation, because the brake disc or drum, as a rule, especially during long driving, gets very hot and can deteriorate.
  • Alloy wheels should be purchased with the same offset ET35, which is set by the manufacturer at the factory, since otherwise the wheels will either be too recessed or, conversely, protrude beyond the transverse dimensions of the car.
  • The rubber must have a profile of no more than 65 mm, otherwise it will touch the fender liners or wheel arches on sharp turns or when driving on uneven roads.
  • Among the most popular brands, you should choose K&K, SKAD, IFree, VSMPO Aurora, YST and some other domestic manufacturers. It makes no sense to consider importing a VAZ with a similar size, since the aesthetic appearance will not be achieved, and the price will be 2 times higher.

Important!

If the owner decides to put low profile tires on 14-radius wheels, the vehicle’s ground clearance will be significantly reduced, and the bottom will hit obstacles on the road at every bump, which will quickly lead to wear and tear of parts.

Cast

The second most popular are alloy wheels. They have a number of advantages over “stamped” ones. One of these advantages is the weight, which can be several times less than that of a stamp. Alloy wheels are made from aluminum and magnesium alloys.

Such substances are characterized by fairly low weight and good thermal conductivity, which ensures better heat dissipation from the car’s brake components. Also, these accessories can be of any shape, which gives a more elegant and presentable look to the VAZ-2114 on alloy wheels.

The disadvantages of alloy wheels include their cost and fragility. As a rule, the price is approximately 3000-4000 rubles for the option with a 14 radius. This is 1.5-2 times more expensive than a stamped disk. Fragility lies in the impossibility of difficult restoration of disks after they split.

Rules for choosing R15 wheels for 2114

Wheels 15 by 2114 are the most popular replacement option for every owner of this brand of car, since the price/quality ratio and the appearance of larger wheels largely encourage the purchase.

You might be interested in this About wheels for winter - cast, steel and stamped

First of all, it is necessary to say about the versatility of the size, since the 60 mm tire profile suitable for these wheels is usually made in the off-season version, that is, the wheels will have the necessary characteristics both for high-speed driving on asphalt and when traveling in winter .

Such discs are no longer standard, so they are often made both in “stamping” and in cast or forged versions, and the right of choice remains with the owner, depending on his aesthetic considerations and the size of the budget.

The main size recommended by the manufacturer is 6.0J x 15 ET45, 6.5J x 15 ET40 or 5.5J x 15 ET45. The maximum tire width can be 205 mm, and the offset can be 45 mm, and it must vary depending on the thickness of the rim in order to center the position of the wheel under the wheel arch.

Companies offering these cast wheels on the market are Venti, Tech-Line, Aero, Neo and others.

Important!

When choosing such wheels, you need to take into account that the standard factory bolt pattern 4x98 is often replaced by the European standard 4x100, which is quite common in many compact cars from the world's leading manufacturers. However, there is no need to worry here, since these parameters are absolutely interchangeable.


Exclusive R17 wheels for VAZ 2114

Classification of disks by manufacturing method

Wheels for VAZ 2114 cars can be manufactured using different technologies, so before purchasing it is important to consider all the options available:

  • Stamped. This is the most common option, which combines various technical and practical features. Low cost combined with high quality are the main advantages that made the products popular in the automotive market for the VAZ 2114.

Among the advantages of stamped discs, we can highlight such qualities that have become the basis for the development of wide consumer interest: due to their softness, such discs are smoothly deformed, so the driver will not encounter unexpected cracking of the disc while driving; Considering that the discs do not burst, but bend, they can be easily restored.

  • Cast. You can even more often find cars on die-cast ones, since they are the personification of durability, reliability, quality and attractiveness. But you will have to spend a lot of money on such a model, since, taking into account the peculiarities of the technological process, the cost increases significantly.

The high cost makes such wheels not affordable for every buyer, but you can count on the following positive aspects: low weight, which makes the car easier to drive;

fuel consumption is slightly reduced; there is a large assortment of shapes to choose the most attractive option; The integrity of the tire is preserved, as it is protected from negative external influences.

  • Forged. Such discs are created by mechanical forging, so they have a solid structure. As a rule, these are white models with characteristic stylistic features.

Photos and technical characteristics of each option are an opportunity to choose the most attractive and high-quality type for equipping your vehicle.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]