Hello, dear readers! The popularity of a machine is determined by its price, build quality, technical and operational characteristics. The combination of such parameters largely determines the fate of the model. There are many popular vehicles on the auto market. And among them is the Ford Focus.
The 2nd generation Ford Focus does not have many inherent problems or malfunctions. That's why the car became a bestseller. But many people have one problem. A common problem with the Ford Focus 2 car is that the trunk does not open.
It is especially unpleasant when the trunk of a Ford Focus 2 sedan does not open. The unit is more difficult to access compared to the station wagon and hatchback.
Yes, the Ford Focus 2 is not one of the cars with the largest trunk. But it has a number of other advantages.
And the problem with the car trunk can be solved with your own hands. Now you will learn how to do this.
How to open the trunk on a Ford Focus 2 sedan video: we explain in detail
Why won't the Ford Focus trunk open?
Ford Focus. This is a reliable and modern car. But it has no design flaws: often these cars do not open the lock with either a button or a key. Installing xenon on a Ford
focus 2 procedure, how to install xenon on a ford focus 2. Car enthusiasts use several ways to open the trunk, depending on the generation of the car and its body type. There can be several reasons for jamming of the locking device: rubbing of the wires that go from the button in the interior to the lock, failure of the electric drive that is responsible for opening the mechanism, or mechanical wear of the latches, latches and other parts. Let's look at real ways to unlock the rear door lock on different Ford Focus models.
Add a comment:
Sort comments: Latest on top
| First on top
2016-01-05 19:29:53 | Igor Thank you for the article. I also encountered a similar problem. But in my case, the alarm does not see that the trunk is closed. The service people where I installed the alarm say that the limit switch is dead, the lock needs to be changed. But when the trunk is closed, the open door lamp on the dashboard does not light up, but when it is open, it does. Does this mean the limit switch is working or am I missing something about the design of this lock? There are 2 thoughts in my head, either the service technicians don’t want to figure it out, or there is still something in the lock that could have gone wrong and given the wrong parameter to the signaling.
Other trunk problems
The trunk of a vehicle includes a certain amount of space, a lid and a lock in the overall central system. The locking mechanism on the Ford Focus 2 is quite reliable, but problems can still arise. For example, if the mechanism is stuck and the door cannot be opened.
It is important here to gain internal access to the mechanism, but this depends on the body type. The best option would be if your car allows access to the trunk from the inside - this is often possible on hatchbacks and station wagons without a dividing partition. But if you have a sedan, the situation will be more complicated. Most often, trunk lid locks fail when foreign objects get into the mechanism. Forcing the system to open and close several times will help solve the problem. If the lock still doesn’t work after this, it’s time to seek the help of professionals. And in general, it is better to trust such actions to qualified specialists.
Another infrequent problem that can make it difficult to open the trunk lock is frost. You can wash your car and go about your business, but the weather has worsened, and next time you won’t be able to unlock the lid.
The situation arises due to the fact that after washing the seal absorbed moisture, and under the influence of frost it turned into ice and froze the trunk. The problem can be solved quite easily - find a warm place and warm up the car. After just 20 minutes the trunk can be opened. You can prevent the situation from recurring by wiping all seals after washing the car. It would also be a good idea to treat them with a special product from time to time.
Opening the trunk of a Ford Mondeo 3
In this car model, the trunk lid contains a remote opening motor, which, like other parts, sometimes fails. The opening button located on it does not fit tightly to the surface, as a result of which water from precipitation or when washing the car gets into these cracks. Severe chemical corrosion leads to failure of the mechanism. Contact an authorized dealer, he will help you open the trunk of a Ford Focus from inside, disconnect and replace the motor under warranty.
To open the trunk of a Ford Mondeo 3 from the inside, you will need to remove the rear row of seats. After getting inside, check the microswitch in the lock itself, because moisture often gets into it. The most possible reason for a tightly locked lock. broken wires in the corrugation.
Opening the trunk: the real way
So, you are faced with an unpleasant situation, and you cannot open the trunk on the second Focus. The trunk button does not perform its function, the lid does not respond to the remote control. What to do? Unfortunately, there is no emergency opening option on the car. It comes to mind to take a crowbar and get to the salon by force, but we are not considering this option, since it will be very expensive. In order to open the fifth door on your own, you need to recline the rear seats of the car and take out all the things that might interfere. Next, we climb inside and perform the following actions:
- remove the plugs near the lock hinge and unscrew the fastening bolts;
- remove the pistons securing the trim;
- we pull the trim and the cover, after which the fifth door should open.
That's all, as you can see, opening the fifth door is quite easy. After this, it will be quite simple to remove the lock, disassemble it and find out the cause of the malfunction. For example, repair the trunk lock. We have already talked about some of them. There are other options. For example, if the trunk can be opened using the remote control, but there is some kind of malfunction with the alarm. In this case, you need to reprogram it, after which everything should work correctly.
Ford Focus two is a modern and reliable car, but the presence of a large amount of electronics leads to the fact that some system may fail. For this reason, a problem arises when the car trunk cannot be opened. If you encounter such a problem, then you need to act in the following sequence: open the lid, disassemble the lock, find out the cause and eliminate it.
The trunk does not open - logbook Ford Focus Hatchback Purple HEDGEHOG 2008 on DRIVE2
The beginning of the story happened back in the summer. The trunk could not be opened using either the button or the key. Mentally, I had already buried the castle. Actually, I took everything apart and reassembled it and the problem went away. But then history repeated itself. As luck would have it, with a whole trunk of things. I took it all apart again. There is no emergency opening of the lock. To open the trunk you need (I didn’t take a photo): - take out all the contents including the spare wheel and the jack. - next to the lock loop there are two black plugs. We remove them and see the bolts that hold the hinge. Unscrew it. -Next, remove the 4 pistons from the black trim. -Pull the trim and at the same time pull the fifth door. Hurray, the trunk is open. -Next, remove the trunk trim and unscrew the lock. We have the lock in our hands, a black lining and a bracket. This whole thing has grown into one detail))) Next we need to open the lock. If you look at the lock from the interior, there is a lever for the mechanical part on the right inside the lock. This is what you need to press. I did it with wire.
Hurray we have the castle in our hands. Next, remove the plastic pad of the lock. We see that the lock consists of two parts - mechanical and electrical. They are connected by an unknown bolt - an internal pentagon with a pin in the middle.
The same bolt
We drill out the pin and then unscrew it using improvised means. We clean the mechanical part from dirt. And it turns out that it all works. Next I started checking the electrical part. And it turned out that the motor was jamming. Let's disassemble the electrical part.
Ford Focus 2 trunk release button
As a result, the trunk will open along with
Trunk release button
In this case, train the alarm according to the instructions attached to it. And maybe this will be interesting:
So, we have a Ford Focus 2nd year, June, sedan. Symptoms: The trunk lid lock opens with
How to remove the trunk button from the trunk lid lining of a Ford Focus In order to remove the button panel, you need to squeeze the two latches along the edges of the button housing. This will help maintain the integrity of the fasteners.
The only option here is to unscrew the lock mate from inside the trunk, and this is very difficult to do, especially in cramped conditions and without a special tool.
We pay special attention to this point: In order not to break them, you need to stick your hand between the casing and the cover and carefully try to press the latches. The decorative strip, located on the outside of the lid, is attached to it using four nuts. Using a socket wrench of the specified size, preferably with an extension, unscrew these same nuts.
They have plastic inserts inside, so there is no fear of their threads becoming rusty.
Methods for opening the trunk of a Ford Focus 1
Check first to see if the locked trunk is related to problems with the alarm. If this is not the reason, we move on to dismantling the rear row of seats and entering the locked trunk from the inside.
- We remove the Ford Focus 1 trim, which is held on by pistons.
We remove the lock from the fastenings and the trunk is open.
Try to open the casing in which all the wires are hidden. Ford designers laid the wires in a corrugation between the trunk lid and the body so that when opened, the wires are slightly stretched, which leads to their abrasion and breakage.
- Restoring the integrity of the wire ensures the functionality of the locking mechanism.
- Remove the child seat cover located in the center of the rear panel, as shown in the photo.
- Lower an iron pin more than 40 cm long inside.
- Find the latch that allows the rear seat to simply recline.
- Pull the opening mechanism and unlock the fifth door.
open the trunk of a Ford Focus in a hatchback body from the inside using a similar principle, you just have to remove the liners before finally dismantling the lock.
If the rear seats in your car do not fold down, you can use the following method:
Brief description of the model
Ford introduced the new second-generation Focus in 2004 in Paris. Assembly started at the main factories in Germany, Spain, and from the beginning of 2005 in Russia. The basis for the new generation was the C1 platform, on which the famous Mazda 3 and Volvo S40/V50 cars were also assembled.
Thanks to the new base, Ford engineers managed to create a modern sedan with optimal suspension settings. The chassis performed well on asphalt and dirt roads, and the response to the steering wheel satisfied even the most demanding drivers. The second generation exceeded the first in length and width. The wheelbase was increased by 25 millimeters; even 17-inch wheels easily fit into the arches.
Body types were offered to choose from: 3 or 5-door hatchback, station wagon, sedan. Power plants with variable valve timing of 1.4 volume; 1.6; 1.8 and 2.0 liters. The transmission was divided into a 4-speed automatic and a 5-speed manual.
The most common versions on the road are those with a 1.6-liter unit paired with an automatic transmission in sedan and 5-door hatchback bodies.
The car is characterized by a decent reserve of power and reliability, but sooner or later the owners are faced with a popular problem: the trunk lid of the Ford Focus 2 does not open. Let's look at the main reasons.
How to open the trunk of a Ford Mondeo 4 sedan?
Usually the problem with a closed compartment lies in the lack of power to the lock located on the lid itself. To unlock the trunk you will need to get into it from the passenger compartment, follow the instructions:
- Recline the seat backs and free up your work area.
- After unscrewing all the pistons (usually their number is from 13 to 16), remove the trunk trim. If you peel back the top of the trim, you will see the lock mechanism itself.
Next, if you are not sure of the reason, you can try two methods.
- The first method is to restore power to the lock. We connect the cigarette lighter for rear row passengers and the trunk lock with a wire. If the problem was a lack of power, then with such a makeshift scheme, the trunk should open when you press the button.
- The second method, traditional for Fords of any generation, is to remove the lock from the sedan trunk lid by unscrewing the fastening screws. It will open after removing the last screw.
Opening the trunk of a Ford Mondeo 3
In this car model, the trunk lid contains a remote opening motor, which, like other parts, sometimes fails. The opening button located on it does not fit tightly to the surface, as a result of which water from precipitation or when washing the car gets into these cracks. Severe chemical corrosion leads to failure of the mechanism. Contact an authorized dealer, he will help you open the trunk of a Ford Focus from inside, disconnect and replace the motor under warranty.
READ This Custom DBA Speedback GT Features a Picnic Area and Personalized Beverage Package
3 ways to open the trunk on a Ford Focus 1
To open the trunk of a Ford Mondeo 3 from the inside, you will need to remove the rear row of seats. After getting inside, check the microswitch in the lock itself, because moisture often gets into it. The most possible reason for a tightly locked lock is broken wires in the corrugation.
Troubleshooting
When you have tried all the methods for opening the trunk from the outside, and nothing has helped, you should try to get to the lid from the inside. This work can be successfully completed by teenagers if they are properly guided and all actions are monitored. Fortunately, the volume and dimensions of the trunk of the second generation Focus will make it easy to carry out these events.
First you need to unlock the rear left door of your Focus II, then recline the 2-seater seat and fold the backrest. Before entering the trunk, you need to take with you a T25 key with a wrench, a socket wrench and a long screwdriver. First you need to remove the button and move the trim away from the body element, but you won’t be able to do this entirely with the lid closed.
The trim is secured to a metal base using latches and a series of bolts, two of which are located in the upper corners of the decorative element, and the other two are located in the handle on the trim.
To remove the bolts, use a T25 wrench with a wrench. Carefully disconnect the decorative element from the trunk door using a screwdriver, first unfastening the upper hooks and gradually going down. Behind the upholstery you will see a wire lever that allows you to open the mechanism - it is located in a vertical position behind the electric windshield wiper.
To unlock the structure, all you have to do is press the lever from top to bottom and push the lid away - for this you can use the wooden handle of a hammer or simply push with your hand. After opening the door, continue removing the trim and check the lock to determine the problem.
How to unlock the trunk of a Ford Focus 2 hatchback?
If there is a problem with the hatchback wiring, the sequence of actions is the same. You should open the corrugations as carefully as possible and find the frayed wire.
To open the trunk of a Ford Focus 2 from the inside, you need to:
- Remove the trunk trim by unscrewing the pistons. They must be handled with care, as they often break when pressed.
- Unscrew the lock plate and disconnect the wires from it.
- Use a screwdriver to press out the latches, remove the earbuds and pull out the button.
- After unlocking the lock, you can begin to diagnose the problem.
For station wagon owners
There is a simple but effective way to open a jammed trunk. But this option is suitable only for owners of the 2nd generation Ford Focus station wagon.
The sequence is:
- insert the awl into the protective casing of the lock in the right corner from the end side;
- pierce the plastic;
- push the awl as deep as possible;
- turn the awl handle to the right;
- wait for the desired sound of the lock opening.
The advantage of this method is that you don’t have to drill or unscrew anything.
How to open the trunk lid on a Focus 2 sedan
If the vehicle does not have an emergency trunk release button, you will have to drill out the lid. To ensure easy access, you must fold down the rear seats and remove all contents of the luggage compartment. Unlocking will be done with a 6mm drill. To do this, you need to drill the plastic cover of the lock, install a screwdriver in the hole and move the cover as far to the left as possible until the mechanism straightens. Next, the lock should be replaced.
If your car does not have the ability to manually unlock the trunk using a key, and it is only possible to unlock the mechanism from the passenger compartment using a servo drive, the problem of a jammed mechanism lies in damaged wires. Test the wiring and hold down the button at the same time. If there is no reaction, perform the following steps:
- Remove the trim fasteners;
- Unscrew the screws holding the locking mechanism;
- We open the lid and carry out further repairs to the lock structure.
List of all car service services and prices for themDownload price list If you do not know the nature of the breakdown of your car, we will help you figure it out. Leave a request and we will contact you to resolve the problem. Submit your application
How to open the trunk of a Ford Focus 2 sedan from the interior - we explain the essence
Opening the trunk from the passenger compartment on a Ford Focus 2 car
The second generation Ford Focus has quite a few congenital diseases. This is probably why it became a blockbuster in our market. How to open the trunk of a BMW E39 without a battery
. The video shows how you can open the trunk from inside the cabin. And yet there are some dirty tricks that the 2nd Focus is capable of. One of them is a tightly and completely locked trunk. This especially angers the owners of sedans, since in hatches and station wagons it’s easy to get to the trunk lock. The battery is dead, how to open the trunk of a BMW, how to open the X5 if the battery is dead. The battery is dead. The situation is further complicated by the fact that during numerous upgrades the Focus received different designs of trunk locks, and if we add to this the abundance of equipment, the task becomes even more complicated. But we will try to figure out how to open the trunk from the passenger compartment on a Ford Focus 2.
Call a specialist to open the trunk
Does the fifth door lock on your Ford jam from time to time? The trunk of a Ford Mondeo won't open, even though outwardly everything looks the same as always? You can fix a lock breakdown yourself, but if you don’t want to delve into the technical details, the problem caught you out of town and you don’t have the experience to properly eliminate it, use. Our technician will arrive on site as soon as possible, diagnose and fix the lock fault, regardless of the model and configuration of your Ford Focus.
Trunk won't open
If the Focus stops responding to the fifth door open button, then the reason may be several main factors:
- The cable loop leading from the passenger compartment to the trunk has become frayed.
- Water got inside the opening button, causing rust to form on the contacts.
- The protective fuse has blown.
If the trunk of a Ford Focus 2 sedan does not open, then the problem is most often in the connecting cable, which comes out of the passenger compartment and is responsible for the license plate illumination, the central locking on the trunk lid and the key itself that activates the lock. This problem is quite common in regions with cold climates. The reason lies in low-quality wires, which become “plastic” at low temperatures and break during bending when opening or closing the trunk.
If the trunk of a Ford Focus 2 hatchback does not open, in this case the reason is most often the penetration of moisture into the body of the key, which is responsible for opening the fifth door. Water dries over time and leaves a rust coating on the working surfaces of the contacts.
If the cable is not broken and the key is dry inside, then the cause may be a blown fuse. If the trunk of a Ford Focus 2 does not open and the license plate light on the trunk lid does not light up, this is a sign that there is no power as a result of a blown fuse.
Car reviews
Car owners note that the car is reliable and can travel more than 300,000 kilometers without problems. The engine does not require special attention other than timely maintenance. The suspension does not fail until the 100,000 kilometer mark, the body does not rot.
Among the minuses, it is worth noting the low ground clearance and plastic mud flaps, which break off when driving over uneven surfaces.
Judging by the comments of customers, in the new Ford Focus 2 restyling models the trunk does not open much less often. The manufacturer takes care of consumers and changes the composition of the sheath for moving wiring. All bugs related to key flooding have also been fixed.
Electrical cause of trunk lock failure
In those configurations of the second Focus that do not provide for manual opening of the lock, it opens using a servo drive. Failures occur most often due to wiring faults. Sat down Akum how to open sat down Akum how to open the trunk on the E39 opened the trunk. The designers laid the wiring harness into the trunk lid so that when the lid is open, the wires are slightly stretched. In what cases is it necessary to replace the alternator belt in a Ford Focus 2 car? Which belt is better to choose, how to replace it correctly? Naturally, this cannot continue indefinitely, and at one point they simply grind together. Then the lock does not respond to the unlock button, the servo is silent.
We try to close and check the integrity of the wiring harness.
If we are dealing with just such a case, then it makes sense to try to move the corrugated hose in which the wiring harness is laid, while simultaneously pressing the release button. How to open the gas tank flap? How to open the gas tank flap? Ford Fusion Guru. The harness is located in the upper left corner of the trunk lid, and can be reached through the gap between the body and the trunk lid. How to open the trunk from the inside of a Ford Mondeo 4. If this option does not work, then you will have to remove the back of the rear seat as described above and get into the trunk from the inside.
After unloading the trunk, we will remove the trim. It is attached to 13 pistons, but after removing the fasteners, the casing will remain hanging on the lock latch. We lift the casing and get to the lock and unscrew the fastening screws with a powerful screwdriver. After this, you can open the trunk, the lock will remain in the latch. We find out the reason, find the place where the wires are frayed and restore their integrity. Good luck in troubleshooting and good luck to everyone!
Ford Focus. Trunk lock malfunction
One fine fine day, when I decided to open the trunk of a Vsevolzhsk Ford Focus I using the key fob, the motor made a strange sound like “Quack” and fell silent.
The trunk opened, but I couldn’t close it. The trunk lock did not work. I tried to press the trunk release button again, but other than the clicking of the relay in the GEM unit behind the glove compartment, nothing disturbed the ominous silence. Along the way, it suddenly turned out that the central locking stopped working. Without thinking twice, I, imagining myself as an average European who doesn’t know what a wrench and a sledgehammer are, went to a Ford service center. After 2 hours I received the car back with a terrible verdict - replacing the trunk lock. What about central locking? The central locking was done by replacing the fuse. Replacing the fuse at a company service cost me 700 rubles. The order included a line: control of electrical circuits. Then it turned out that there was no trunk lock available, and it costs 4,100 rubles. In response to a stupid question about the part code, I was told with an arrogant look that the office does not provide certificates and that this is a military secret!, which they will not reveal even under torture. This is strange, since almost all branded parts from Motorcraft are cheaper on the branded service than on exist. What's the point of hiding? The price of 4100 rubles (fincod 4398070) for some kind of lock seemed blasphemous to me and I decided to figure it out myself.
To gain access to the lock mount, you need to open the trunk and unscrew the three plastic screws with dowels on which the trim hangs.
Now you need to disconnect the terminal block, for which you need to pry off the tab with a thin screwdriver.
Terminal block: Bottom right contact is ground. The upper right contact is 12V to power the motor. The tester's measurement seemed to show the presence of voltage at the +12V contact, but since the GEM powers it for less than a second, it was difficult for the digital tester to determine exactly what voltage was being supplied. Mechanical problem with the lock?
In order to remove the lock, you need a torx screwdriver. I found this in some Chinese set for 70 rubles
These two screws need to be unscrewed.
The screw tightening torque at the factory is high, so I had to use this simple device.
Next, you need to remove the sealing ring of the lock cylinder from the outside of the trunk lid.
You just need to pull out the ring without damaging the rubber part.
And here he is. Sore tooth. Just in case, I decided to check the operation of the drive again and connected it directly to the battery. Imagine my surprise when the motor worked. Now the mechanical part of the lock began to work normally. How so. Blown fuse, but running motor. Yeah, the problem is somewhere in the wiring.
The obvious problem area is the passage of wires from the body to the trunk lid. Isn’t this where the su is buried? dog?
After cutting the tube, it became obvious to me that the reason was a broken wire.
One of the exposed wires went to the license plate light. Are there any problems with it? That's right, the backlight doesn't work, the fuse is blown.
This is how the comic turned out. After repairing the damaged wires and replacing the backlight fuse, I found that everything began to work as before. The whole procedure took me 30 minutes. The question arises, in a sense rhetorical - what exactly did they do at the Ford service center for two hours and how was the electrical circuits monitored? Why did they charge me 700 rubles? And why did they try to replace a working trunk lock that cost as much as 4,100 rubles? I think everyone can make up their own answer to the best of their knowledge in the field of Russian obscene language.
Author: Andrey_B Any use of site materials is possible only with the permission of the author and with the obligatory indication of the source.
How to fix the problem yourself
If one of the listed methods helped open the trunk, then the cause of the breakdown will immediately become clear. If moving the wires helps, the cable is broken; if the fuse helps, the problem is the button is closed.
If a wire from a cable breaks, the following operations must be performed:
- move the boot;
- replace damaged wires with new ones, preferably large cross-section with a soft sheath;
- return the boot to its place.
If replacing the fuse helped, then you must definitely find out the cause of the short circuit; it can be hidden in the button or also in the cable.
Important! If you manage to open the trunk door, you cannot close it until the problem is fixed.
Why doesn't the trunk open on a Ford Focus 2?
On the simplest and first modifications of the second Focus, the lock did not have an access restriction button.
Some Focuses since 2004 (with 1.8/2 l engines) have already received this button. In the first case, without a button, it is almost impossible to open the lock without a key. The only option here is to unscrew the lock mate from inside the trunk, and this is very difficult to do, especially in cramped conditions and without a special tool. Here is a photo of the new and old style trunk latches.
Here is a diagram of the castle.
As you can see, there is no obvious difference, but the emergency trunk release button is located in different places. It is indicated by arrows in both figures. First, let's open the lock with a new latch option.
Opening the trunk without a key. Method No. 1
Let's look at what needs to be clicked.
To get into the trunk, we need to fold back the rear seat. This is not easy to do, but it is possible. The fact is that the backrest fastening latches should, in theory, be opened from the trunk. Therefore, we will shamelessly bend the back until we reach the latches. Next we do this:
- We remove the rear backrest and unload the trunk through the interior to free up maximum space for work.
- The photo above shows the plastic lid, and there is a blue area marked on it that needs to be cut out with a sharp knife.
- Remove the plastic cover.
- Using a thin screwdriver, activate the emergency trunk release system, as shown in the figure below.
How to open the trunk yourself
Unfortunately, Ford has not provided an emergency cable or hatch to open the trunk lid in the event of a malfunction.
- If the car comes with a flip key with trunk opening keys, then the first thing you need to do is try to open it using the remote key. This method helps in about 60 percent of cases. The fact is that two different wires are responsible for the electrical signal to the lock: from the radio channel and directly from the lock key. If the wire responsible for the button on the trunk is broken, then the key fob will cope with opening the fifth door.
- The next step is to check the fuse in the cabin. To do this, open the car’s operating instructions and find out the number of the fuse link, which is responsible for powering the trunk lock. The fuse box is located under the glove box and is held in place by two latches.
- If the radio channel and the fuse do not help, then you need to recline the rear row of seats and look into the luggage compartment. On the driver's side, a thick plume comes out of the cabin, which you need to actively move, and then try to open the fifth door again. You can invite a friend who will press the button while trying to move the train. This method often helps if broken wires come into contact and a signal passes through them.
- The last and most difficult option is to remove the trim from the inside of the fifth door and unscrew the bolts that hold the saber with the key. The removed saber will allow you to access the button for cleaning from water and rust.
Methods for opening the trunk of a Ford Focus 1
Check first to see if the locked trunk is related to problems with the alarm. If this is not the reason, we move on to dismantling the rear row of seats and entering the locked trunk from the inside.
- We remove the Ford Focus 1 trim, which is held on by pistons.
Remove the lock from the fastenings. and the trunk is open.
Try to open the casing in which all the wires are hidden. Ford designers laid the wires in a corrugation between the trunk lid and the body so that when opened, the wires are slightly stretched, which leads to their abrasion and breakage.
open the trunk of a Ford Focus in a hatchback body from the inside using a similar principle, you just have to remove the liners before finally dismantling the lock.
If the rear seats in your car do not fold down, you can use the following method:
- Remove the child seat cover located in the center of the rear panel, as shown in the photo.
- Lower an iron pin more than 40 cm long inside.
- Find the latch that allows the rear seat to simply recline.
- Pull the opening mechanism and unlock the fifth door.
Ford Focus Fan
Monitor the condition of the cover. The trunk does not open or only opens with the key, which means the Ford Focus 2 trunk button has fallen off or the wires have broken.
Perhaps we should start by checking the wiring. On the second Focus, most often they break off at the junction between the trunk door and the exit to it. Remove the wiring harness cover next to the shock absorber, first pull it halfway down or up and check the integrity of the harness, and then remove the cover on the other side, also pull it in the opposite direction and check there. The problem is the worst wiring, first of all, secondly, in this place the wires fold straight when closing the trunk, and when opening they straighten out again. The result is a broken wiring, a short circuit, the trunk of the Ford Focus does not close or opens on its own...
I bought my 2005 sedan and there was no trunk release button on my Ford Focus 2, as such. She was “gnawed out”.
To begin with, I ordered a Ford Focus trunk lid handle, then it turned out that there was no handle at all. And the price of the Ford Focus 2 original trunk release button was an unpleasant surprise: 2000 rubles. And so, let's start replacing the button.
How to remove the trunk lid trim for a Ford Focus 2 sedan
We unscrew the 13 plastic clips and, overcoming the resistance of the clamps, pull out the plastic handle of the trunk lid.
As you can see in the photo, plastic screws are screwed into the pistons, which are initially inserted into the holes under the casing.
By the way, often a sticker with information about the car’s paint can be found here.
But these grooves accommodate the latches of the inner handle of the lid. They are easy to break during dismantling. So, when removing the casing, you need to put your hand under the casing and try to squeeze out the fasteners.
The Ford Focus 2 trunk lid molding is secured with 4 x 10 nuts; the photo below shows their location.
Removing the molding-lining for the number plate illumination of the trunk lid Ford Focus 2 sedan
We unscrew them using a ratchet with an extension or a socket wrench.
The nuts on the trunk lid have a plastic sleeve inside, so they will not rust or stick.
There are two plastic clips at the edges of the license plate illumination strip. It is also advisable to squeeze them out from the inside so as not to break them, while simultaneously pulling the bar outward. Personally, I just pulled the molding towards myself more strongly.
Before disconnecting the license plate light wires, disconnect the trunk release button connector.
Then, you need to squeeze out the rubber seal in the hole for the button wire.
Now, disconnect the plugs of the license plate lamps and pull out the bar.
Immediately check to see if the lining clips are intact.
Be careful when dismantling so as not to damage the paint layer.
How to remove the trunk button from the trunk lid trim of a Ford Focus
In order to remove the button panel, you need to squeeze the two latches along the edges of the button body.
Let's start from one end. We pressed the ear tightly against the body of the button, and at the same time, press the button down so that the latch no longer straightens and rests against the bar. We do the same on the other side.
Ford Focus trunk lid button code number: 3M51-19B514-AC DOTA A 2
The button will come out tightly, so pry it around the edges with a flat-head screwdriver and remove it. For some reason, my Ford trunk button is like this, apparently everything was pulled out.
In general, we throw it away and buy a new one.
Ford Focus trunk release button, price
They cost from 700 rubles for the analogue and as much as 2000 rubles for the original.
In appearance, the Ford Focus 2 or 3 trunk lid button is a piece of rubber and a wire.
Until we put everything back in place, we have the opportunity to replace the trunk lid license plate lamps or even change the license plate lamps altogether.
Make sure the gasket is intact, otherwise it will get covered in dirt and dust.
Ford Focus 2 trunk lock replacement
While the trunk door trim is removed, we can also replace the trunk lid lock.
To do this, disconnect the power plug using a flat screwdriver.
We pressed the locking tab, push it inward and, at the same time, pull the plug down. Next, unscrew the three bolts of the star lock.
After that, we simply remove the lock.
If you need a code or finish for a factory Ford Focus trunk lock, then here it is...
How to open the trunk of a Ford Focus without a key
Do-it-yourself: Again the trunk did not open.
Now this morning I couldn’t open the trunk again, I go up to the car, the lock clicks, but does not open, I did it about a year earlier, I think well, I’ll do it later, I start the car, I drive off and right there on the dashboard the message “Trunk is open” appears and a loud sound sounds alarm, and so on every 15-20 seconds. My head had already become square after 20 minutes of such a disco. I braked, took everything out of the trunk, folding back the rear seats.
Trunk access
And he climbed inside the trunk, armed with a screwdriver) It is necessary to carefully remove the trunk trim
Trunk trim
We take a screwdriver and unscrew the bolts from the plastic clips, then take out the clips themselves, bend the casing from top to bottom, because it cannot be completely removed, the closed lock gets in the way
Unscrew the bolts
Then we just pull all the wires that are there)), it helps me from time to time)), well, it’s better to ask someone to press the trunk button at this time), it’s better to pull the harness that bends when you open the trunk, which is usually where wires break If the trunk still does not open, then you will have to either remove the lock itself (which does not always help, because when removing it you can simply break it), or drag 2 wires from the battery and remove the chip from the lock to open it like this...)
We tear off the trunk and pull the harness off the wires
And here we are looking for damage to the wires, usually they are visible to the naked eye, but because I have already repaired them more than once, they are already all insulated, and even partially replaced with more elastic ones) I had a break in the black and white wire, just at the point where the connection was repaired. I lengthened it slightly and insulated it with blue electrical tape. Let’s check if everything works...
The cliff was here
Then we put everything back together and voila, everything works like on a new machine)) Thanks for your attention!)
Trunk lock repair
To troubleshoot problems, it is necessary to remove the lever that connects the door mechanism with the electric drive - to do this, turn the plastic stopper to the left and remove the curved part of the lever.
The lock is secured to the trunk with two nuts that can be unscrewed with a 8mm socket. When removing the assembly from the door, do not forget to remove the lever connecting the system with the locking mechanism itself. After an external inspection of the assembly, you can remove the retaining ring and carefully remove the rotating part. Try not to lose the small key mounted near the lock cylinder. Now you need to clean, lubricate and reinstall everything. Turn the lock to the right and back with the key. If rotation is difficult, use WD40 fluid.
The mechanism is installed in the reverse order. Thus, the problem of locking the lock can be eliminated in just half an hour, but be careful with the design of the mechanism and the casing to maintain the integrity and functionality of all parts.
Approximate cost of the service
If the trunk of a Ford Focus 2 does not open, then the official service may require 3,000 rubles for work, plus 2,000-3,000 rubles for new spare parts.
In third-party workshops, the cost of work is not very different, however, spare parts may not be available, and delivery times can reach 30 days.
Sources
- https://AutoMotoKit.ru/avtodvigatel/ne-otkryvaetsya-bagazhnik-ford-fokus-3.html
- https://max-lada.ru/ford/kak-otkryt-bagazhnik-ford-fokus-2-hetchbek-iz-salona.html
- https://avtograf70.ru/uhod-za-avtomobilem/kak-otkryt-bagazhnik-ford-fokus.html
- https://FokSevmash.ru/elektronika/ne-otkryvaetsya-bagazhnik-ford-fokus-2.html
- https://AvtoSotka.ru/motor/ne-zakryvaetsya-bagazhnik-ford-fokus-2.html
- https://2bro-service.ru/article/chastye-problemy-s-bagazhnikom-ford-fokus-2-i-ih-reshenie
- https://MySummerCar.ru/marki-dvigatelej/ford-fokus-2-ne-otkryvaetsya-bagazhnik-predohranitel.html
- https://FB.ru/article/427110/ne-otkryivaetsya-bagajnik-ford-fokus—kak-samostoyatelno-otkryit-pyatuyu-dver-i-proizvesti-remont-skolko-stoit-rabota-v-servisnom-tsentre
[collapse]
