What is the best way to open a VAZ-2109 car using improvised means, that is, without a key? A question like this comes up relatively rarely. In such a situation, many motorists simply do not know what to do. The worst thing is if the trouble happens somewhere along the way, far from the garage and the tools in it.
Most often, the door does not open when:
- the driver absent-mindedly leaves the key in the car;
- the alarm system fails;
- the battery is discharged, etc.
Fortunately, in the model of the Volzhsky Automobile Plant in question, it is quite easy to open a locked door without damaging it completely or only slightly damaging it.
How to open a VAZ 2110
How to open a jammed door? First of all, you need to check if your trunk is closed. If it is open, then you will not have to break the car and you will easily get into the interior. And the question of how to open without a key will be removed from the agenda.
How to open a VAZ 2110 without a key
If you are thinking about how to open a car without a key using a rough but quick method, you can break out the car window with a stone or other heavy object, but you need to remember that replacing glass is expensive.
Another option for rough opening is to drill out the lock with a drill. But this method is applicable only when there is access to electricity and a tool.
How to open the door of a VAZ 2110
How to open a car with minimal effort? In this situation, there is only one way out and it consists in contacting a specialized company for emergency opening of automobile locking systems.
It is worth noting that masters never resort to radical methods. They will try a lot of ways, but will keep your property intact. Their assortment includes not only modern master keys, but also many other special tools.
Moreover, the services are much cheaper than replacing broken glass or completely replacing the locks on your car. Another very important advantage of this service is that specialists respond to your call as quickly as possible.
Emergency opening companies are located in every city, so no matter where you are, you will always receive qualified assistance.
Door opening method
If the VAZ-2109 door does not open from any side, then the cause of the breakdown is difficult to determine, since there is absolutely no access to the lock mechanism.
A somewhat simplified version of the breakdown occurs when the door does not slam shut completely and gets stuck in that position. Then it is possible to reach the latch from the outside with a sharp object.
To open a jammed door, you must first perform the following steps:
When simple means do not produce results, the door will have to be opened from inside the cabin, which will require removing its trim.
In practice, this is not easy to do, because the casing is pressed by the sash and it is difficult to pull it out without damage. But there is still no other way out: it is better to damage the inner panel than to mutilate the door itself.
To dismantle the decorative panel, you need to unscrew the armrest handle with a screwdriver, and then the storage shelf located at the bottom of the door card. Then the button that secures the lock from above is unscrewed and removed. Lastly, the window lifter handle and the opening handle frame are removed. Now you need to carefully separate the lining from the body using a pair of flathead screwdrivers and another suitable tool. You may be able to remove the trim without visible damage.
When the decorative panel is removed, access to the lock mechanism from the inside opens, although getting to it is inconvenient. Immediately check whether the rod running from the handle to the lock has fallen off. This is a fairly common malfunction that can be fixed with little effort. Put the rod in place and open the door.
If there are no visible reasons for the breakdown, simply try to open the door from the inside by working on the mechanism with various tools. If necessary, enlist the services of an assistant who will press or pull the door from the outside. Experience shows that such procedures for opening jammed doors can take a lot of time, so you will have to be patient.
How to open a VAZ 2109
One of the simplest ways to answer the question of how to open without keys is to use a piece of rigid but flexible wire up to one meter long. You need to make a hook at the end of the wire, this structure needs to be inserted between the glass and the seal and find the door rod. Once you succeed, you need to pull the hook towards yourself and you will no longer have problems.
How to open a VAZ 2109 without a key
If you understand locking mechanisms and know how to use master keys or knitting needles, then you will not have any problems. You just need to install the master keys in the keyhole and, carefully operating them, carry out the necessary actions to open it.
The only disadvantage of the method is that not every motorist can boast of having such skills.
How to open the door of a VAZ 2109
If you keep spare keys at home or your friends or relatives have them and you are close enough to them, it would be wise to just go and get a duplicate.
The most gentle options
You should use a rope if your car has mushroom-shaped internal locking buttons. A not too thick twine about a meter long will suit you. At worst, take a lace from your shoe. The main thing is that it reaches with a margin to the bottom of the window.
At one end of the twine, make a loose loop. Its size should be approximately twice the diameter of the lever.
Next, the driver's door needs to be pressed away from the body in the upper right corner. We push the prepared noose into the resulting gap and throw it on the button. It is unlikely that you will succeed the first time, but sooner or later, with due diligence and patience, everything will work out.
Then the rope, slightly stretched, is moved very carefully and slowly downwards (towards the door handle) and only then is it tightened tighter on the “fungus”.
After this, the string is returned to the upper corner of the door and the latch rises.
You can also use a piece of fairly stiff wire or an old electrode. A hook is made at one end of it. Further:
- move the glass seal on the driver's door directly opposite the lock button to the side;
- a hook is inserted inside;
- they put him under traction;
- they grab it and pull it up.
It is not difficult to open a closed car with a student's ruler. Very thin steel would be more suitable. The plastic one will most likely break and part of it will remain inside the door. It is inserted in the center of the glass - in this place there is a lock rod, which should be pressed. Before doing this, the door is pressed more tightly against the body of the car, leaning with the whole body - this way the bolt will move easier.
How to open a VAZ 2112
If you don’t know how to open a car if the lock has frozen in the cold, you will definitely find the instructions below useful.
The essence of the method is to heat the key with a lighter and insert it into the keyhole, thus melting the ice. It is quite possible that you will not succeed the first time. If the door of the VAZ 2110 still does not open, you can repeat the procedure several times.
Important: in order not to suffer with the lighter in the future, it is worth purchasing a special liquid from a car dealership intended for defrosting the lock.
How to open a VAZ 2112 without a key
Another method that will help those who do not know how to open a car without a key is the method based on the use of a ruler. To use it you will need to get a long, thin and strong metal ruler, pushing it under the glass, you can apply pressure to the locking mechanism and open the door.
How to open the door of a VAZ 2112
If you don’t have special equipment on hand, even an ordinary lace will help. You need to tie a loop on it and push it into the cabin by lowering the glass with your hands. Then all you have to do is hook the lock, tighten the loop and pull the cord towards you.
Therefore, the answer is very simple. Use a lanyard!
More traumatic options
The method described below is suitable if you need to get into the trunk and there is a cylinder on its door. You can open the lock here with a strong flat-head screwdriver. In particular, it is inserted into the well as deep as possible and turned with a sharp, strong movement towards the opening. Usually the mechanism works the first time. It is almost guaranteed that it will then have to be replaced.
A trunk with a standard lock can also be opened using a more barbaric method. It will only work if the metal is still strong enough. A rotten one will most likely just break. To do this, you need to grab the edge of the door with both hands on both sides of the locking device and pull it very strongly and sharply towards you. The problem is that with this method of opening the trunk is often deformed, so you should use it with the utmost caution.
How to open a VAZ 2114
If you have a VAZ 2114, how can you open it with the help of specialists?
You can call the nearest service station and find out if they have a locksmith who knows how to open locks. The service station has all the tools that will help solve your problem. All you have to do is thank the master by paying for his services.
How to open the door of a VAZ 2114
If the door of the VAZ 2109 does not open and conventional methods do not produce results, you can resort to rough ones.
For example, you can forcefully insert a screwdriver into a keyhole and then turn the lock. Even if you cannot remove the lock, there will be no problems opening the door. Consider the fact that it is almost impossible to insert a screwdriver without a hammer.
Causes of malfunctions
There are several types of malfunctions that prevent the doors of a VAZ-2109 from opening from the outside or from both sides:
- The outer key, made of silumin, broke off. This happens when you try to open the door in severe frost, applying a lot of force. Breakage is not considered a big problem, because the sash can be opened with a handle from the inside.
- The silumin pusher, which is activated by the opening key, has broken. The reasons are the same: low temperature outside and strong pressure. In this situation, the door can also be unlocked from inside the car.
- The rod that connects the handles with the locking mechanism has disappeared. The door does not unlock from either side.
- Wear of parts of the locking device.
- The screws securing the lock have come loose and it is hanging freely inside the door card. It is impossible to open the door using the handles.
The latter malfunction sometimes occurs due to the fault of the car owner himself, who has decided to change or repair the door lock. Having put it in place and not fully tightened the screws, the owner of the VAZ-2109 accidentally slams the door, after which it will not be possible to open it with the handle.
How to open a VAZ 2115
It happens that the battery unexpectedly runs out for the owner, the alarm goes off and leaves the door locked. How to open it in this case?
It’s quite simple, you need to put a special pad between the body and the hood of the car, inflate it and make a small hole.
After this, you just need to connect the positive terminal of your car’s battery with a wire to the positive terminal of another, fixing the “minus” on the disk, and after connecting, press the key fob button. It is best to have someone help you with this procedure.
If you are confused and don’t know what to do, you can call the Ministry of Emergency Situations. However, the specialists of this service are not familiar with careful opening methods, and your car will definitely suffer.
As you can see, there are no hopeless situations.
How to open the door to a VAZ-2109 without a key?
Most car owners are faced with a simple situation: the keys are inside and the car doors are locked. And the second keys, which no one has, are far from the scene of the incident, and you don’t have much time. Don't panic - you can open the car door without a key.
How to open your car if the key is inside? To do this you need to hack it. But remember, before you start this action, try to explain to the people who are nearby (employees of nearby cafes and shops) that you are trying to open your car. Because some citizens may call the police to figure out what you are doing near an unknown car. At the same time, it is difficult to prove to law enforcement officers that this is your car without having documents for it, because the documents most likely remained in the same place as the keys, or rather, in the interior.
After we carried out the explanations and listened to a dozen tips to break the glass with a brick from especially witty people.
How to open a VAZ car without a key
A situation where the car door is closed and the keys are left inside can happen to every car owner. Don't panic and take rash actions. In fact, opening a domestic car is not as difficult as it seems.
Open the VAZ door without a key
Of course, the easiest way to open a car door is to break the glass and lift the treasured button, which will unlock the lock and allow you to enter the car. But this method of getting into the car is extremely unproductive and leads to additional expenses associated with installing new glass and a significant loss of your time. But if there is no other way to open the door and you still decide to deliberately “damage” your four-wheeled friend, then remember that breaking glass with your bare hand is quite dangerous. You risk cutting yourself badly and, in addition to the unresolved problem with the door, you will also end up with a bloody hand. To break the glass, find a heavy, hard object.
Aphorism
Sometimes you need to get drunk. To feel exactly where the brain is the next morning.
Option #2. We use wire and rope
This option, of course, is free, but it requires a certain skill, which is shown by the heroes of action-packed films. There are several ways to open the door yourself:
- Using a wire hook. It is important that the wire has medium stiffness and a length of about 70 cm. It needs to be bent so that you get a 7-centimeter hook at an angle of 45 degrees. The wire should fit freely into the space between the seal and the glass. You should insert the “tool” into the indicated space and hook it to the opening button. Pull until the pusher rises. Opening time is about 15 minutes.
- Rope loop. The method is suitable only if the car has an internal button protruding above the door panel. So, first you need to bend the corner of the door. Wind the rope, hook it to the button and pull. Requires maximum concentration and dexterity.
How to open the door to a VAZ-2109 without a key?
Most car owners are faced with a simple situation: the keys are inside and the car doors are locked. And the second keys, which no one has, are far from the scene of the incident, and you don’t have much time. Don't panic - you can open the car door without a key.
How to open your car if the key is inside? To do this you need to hack it. But remember, before you start this action, try to explain to the people who are nearby (employees of nearby cafes and shops) that you are trying to open your car. Because some citizens may call the police to figure out what you are doing near an unknown car. At the same time, it is difficult to prove to law enforcement officers that this is your car without having documents for it, because the documents most likely remained in the same place as the keys, or rather, in the interior.
After we carried out the explanations and listened to a dozen tips to break the glass with a brick from especially witty people.
9 years on the forum
Auto: 21093 1995 carb + MMC P2 1993
How to open a VAZ 2114 without a key: necessity and possible options
Every experienced fourteenth car owner has at least once (and absent-minded ones more than once) lost their car key. This is the situation when only two thoughts flashed in my head: “how to open a VAZ 2114 without a key?” and “how did this even happen?”
When something like this happens according to the “as luck would have it” principle, a whole string of accompanying troubles happens: the second set of keys is far away (at home, at mom’s, etc.) or is missing altogether, there is a lot of fuel in the car and waiting until it stalls is not an option, it’s completely at hand there are no tools, because everything is locked in the trunk and others.
So let's look at what to do and how to get into the car.
IMPORTANT! We raise the question: “how to open a VAZ 2114?” only in the context of a situation where you cannot get into YOUR car and in no case do we call for illegal actions or describe them.
Review of simple methods
Before you get nervous and fall into a stupor, think about the fact that the domestic auto industry, in principle, is not particularly airtight. In most metal joints, this characteristic is achieved with rubber bands, plugs and other elastic sound-absorbing nonsense.
At the same time, the design of the door plugs in models older than the VAZ 2110 does not allow the use of a fishing line (string), so trying to lower the glass with weight is pointless.
The following methods immediately come to mind on how to open the door of a VAZ 2114:
- We remember where the car keys are and think about how to deliver them to it. Leaving the car running (with the ignition on) is dangerous: firstly, the gas may run out, and secondly, the battery may die. In both cases, the doors will open and the car will remain open until you arrive. Therefore, it is better for someone else to bring them.
- We call a door opening company - specialists will arrive quickly and do everything instantly and inexpensively, but under two conditions. In the West, this problem is not so acute, but with the dominance of our compatriots, registration documents and licenses began to be checked there too. When the specialists arrive, they will want to make sure that the car is your property, for this they will check the specified documents. If they are not there or the car is on another person (godfather, matchmaker, etc.), they will not help you, because no one wants to be accomplices in the theft.
Backdoor
Rear door of VAZ 2109
1.
Open the door and remove the two bolts securing the limiter bracket to the B-pillar.
2.
Open the bolts securing the upper and lower door hinges to the B-pillar and remove the door.
3.
Install the door in the reverse order of removal. Before final tightening the bolts securing the hinges to the B-pillar, close the door and position it so that the gaps in the openings around the entire perimeter are the same. Then carefully open the door and finally tighten the fastening bolts.
Rear protective film with mounting holders.
1 – nuts securing the window lifter guide 2 – nuts securing the window lifter mechanism
1 – window lifter marking place 2 – slider 3 – guide 4 – window lifter mechanism
1.
Lower the window all the way down and remove the rear door trim in the same way as removing the front door trim. The photo shows the location of the rear door trim mounting pins.
2.
Remove the inner lower glass seal.
3.
Remove the three holders (two on top and one on the bottom) by prying them up with a screwdriver. Remove the rear protective film from the door (see note).
4.
Unscrew the two bolts securing the glass frame to the window lifter slide, holding the glass. Carefully lower the glass down.
5.
Unscrew the two lower and one upper nuts securing the window lifter guide.
6.
Unscrew the three nuts securing the window lift mechanism.
7.
Remove the window regulator from the door.
8.
Remove the outer lower glass seal.
9.
Remove the top seal.
12.
Install the glass and window regulator in the reverse order of removal.
10.
Turn the glass back and remove it from the door.
11.
Check the tightness of the glass in the frame. If the clip does not fit tightly, replace the glass along with the clip.
1 – outer handle rod 2 – outer handle 3 – intermediate locking rod lever 4 – locking rod 5 – internal lock 6 – inner handle rod 7 – inner handle
1.
Unscrew the two screws securing the outer door lock and remove it. The threads of the screws are sealed with sealant, so we recommend using an impact screwdriver when unscrewing.
2.
Remove the two screws securing the inner handle.
3.
Unscrew the nut securing the intermediate locking rod arm.
4.
Push the lock lock rod inside the door.
5.
Disconnect the outer handle rod from the inner lock.
6.
Push the inside handle in and remove the lock from the door.
9.
Install the lock with drives in the reverse order of removal, having first lubricated all rubbing parts with grease. Check the ease of opening and the reliability of closing the door lock. If necessary, adjust the lock in the same way as adjusting the front door lock (see subsection 10.8.).
7.
Remove the locking clips to disconnect the rods from the lock levers.
8.
Unscrew the two nuts and remove the outer handle.
Radical approach
If there is no time, and nerves are at their limit, some car enthusiasts resort to them, but these are the worst ways to open a car. Imagine that you decided to sell your car in a year, and the buyer you came across was attentive and meticulous. Traces after an approach by brute force will remain with a 99% probability, and such a car will be sold for a very long time, because no one will believe that it was not in an accident.
If you decide then:
- We break out the lock - take a screwdriver and hammer it into the lock cylinder, and then turn it. This method is incredibly expensive, because further repairs are required. You will be faced with the fact that instead of one cylinder you will have to change all 5 (doors + trunk), and after the repair you will have two keys. In order to have only one key, you will have to order expensive locks and wait a long time, dooming yourself to the inability to use the car always open.
- We break the glass - when you damage the lock, but do not open the car, break the glass. It is necessary to break the rear door glass (preferably the right one). There are several reasons for this decision: firstly, a window sealed with tape will not spoil visibility, and secondly, if after breaking it turns out that the back door of the VAZ 2114 does not open, and you have to knock out all the glass to get through, you will have less wind later. And don’t break the glass with your hands - find a hammer, otherwise, in addition to a car mechanic, you will also need a surgeon.
WORTH KNOWING! Another tip is to buy the tape in advance, because if the fragments hang on it, you will not have to clean the interior. Imagine the area you are going to hit as a square and cover it with tape on only one side.
Method #1: Use a lanyard
First, make a loop in the rope, which should tighten if you pull the ends of the rope in different directions. Hold the ends of the rope in each hand and pass the rope through the corner of the door from the top, using a back and forth motion to advance the rope to the inside door lock release button.
Next, throw a loop over the button and, after tightening it, pull the rope up to unlock the car door.
However, please note that such a life hack will not help if the door lock button in your car is recessed into the door trim, since you will not be able to put a loop over the button. Also, this method is not useful if the door lock button is located on the inside side of the door (for example, next to the door handle).
Adequate methods
This will surprise many, but there are much more adequate methods to get into an automatically locked car without damaging it than radical and expensive ones.
So, the car is locked from the inside with the keys in the ignition, it’s a long drive to get the keys, and I don’t want to spend money either on a special company or on subsequent repairs:
1. Open the trunk to get into the cabin. There are several methods to perform this task:
- We apply a strong impulse blow with an open palm just below the lock, and the vibration will complete everything for you and the latch will open;
- take an awl (a woman’s nail file or manicure scissors) but not a screwdriver. We insert the existing object under the seal and press the tongue.
2. Open the hood and disconnect the battery. This is the simplest of the methods:
- we crawl under the car and find the cord leading to the hood lock; if that doesn’t work, we look for the lock tongue through the radiator grille;
- press the tongue mechanically or pull the cable and the hood opens;
- We approach the battery and knock down the negative terminal, and click it several times on the mount. The car body, which is a minus, is a large consumer and turning it on abruptly will create a small soft drop. It’s better not to touch the right one, because you can burn the ECU.
3. Open the door with wire. The sequence of actions is as follows:
- we find a stiff wire and an analogue of a woman’s nail file and get to work;
- use a thin object to pry out the glass seal near the lock;
- we insert the pre-bent wire into the prepared hole and lower it until it rests;
- the wire rests against the lock latch, so we turn it and turn it until it goes around it, when it “falls through” we pry it back;
- The opening procedure will take 2-5 minutes, and the door will be open; all that remains is to hammer the seal back.
4. Open with your phone. The most interesting, and most importantly effective method of how to open the door on a VAZ 2114. It is simple and amazing:
- you need to remember who has the second keys and call this person;
- bring the phone closer to the keyhole;
- the interlocutor at the other end presses the open button and the machine is open.
Search
How to open a VAZ 2114 without a key? VIDEO
There may be situations in everyone's life when, due to an inconvenient coincidence, the car keys remain inside the broken car. As a rule, a spare set of keys is out of reach (at home, at work, in another part of the city) or completely missing. What should an unfortunate motorist do in this case without the help of a locksmith - we will look in more detail in our article.
A creation of the Russian automobile industry. The presented VAZ 2114, unlike its predecessors, is equipped with cylindrical plugs on the doors, which eliminates the possibility of opening the door using a cable or a pin. In this case, We will come to the rescue with the help of ordinary iron wire.
So, the sequence of actions will be:
- It is no secret that the density of the VAZ 2114 cabin is achieved through the use of rubber sealant for glass. To secure the glass, the sealant is placed at its base: between the door frame and the concrete window glass. To get inside the machine, we need to carefully tear off the edge of the seal (from the locking mechanism) and pull it out of the groove. It is most convenient to push the material with a narrow, flat object (a nail file, a flat screwdriver or a narrow stem). There is no need to remove the entire filling, because for the next manipulations we will only have a few cm of free space.
- Next, it will be useful for us to find a suitable piece of metal wire. Its length should be no less than the height of the door. At the end of the rod it is necessary to make a bend 2-3 cm long at an angle of 45 0.
- Now we can move directly to the autopsy procedure itself. Insert the bent end of the wire into the cut slot in the door until it meets the barrier. This is usually a locking mechanism. Next, you need to carefully twist, push, and move the wire to find a path around the lock. When you feel that the rod has failed, you need to carefully move the wire so that the bent end clamps the locking lever. Gently pull the wire up to open the door.
How to open the trunk if the defect is blocked VAZ 2108-09-99-13-14-15
You may also like
- Replacing the Low Beam Lamp for Honda SRV 4 Did you like the article? Get new thoughts about the right car tips on our channel. Subscribe to us on Yandex.Zen. register Any low light bulbs, whether xenon or halogen, will break at some point...
- How to Check Errors on Opel Astra H
Purchasing equipment that allows you to access diagnostic codes is only the first step towards detecting and correcting defects. It's not that hard to learn the code. You also need to know what this means and what direction to look in...
First dynamic images of AllNew Seat Leon
The new SEAT Leon makes its maiden journey to demonstrate a strong design evolution. Latest technologies keep car and driver always connected. SEAT Leon arrives in the UK in spring 2022. Milton Keynes, 19 March 202…
Replacing Rear Struts Lancer 10
Mitsubishi Lancer FAQreplacement rear shock absorbersRear rear springs are best replaced in pairs if the car is not new, so you will need two shock absorbers Kayaba 341368, which costs 1,500 rubles. For those who like unique parts, here's the Mitsubi number...
Replacing the Fuel Filter Ford Mondeo 4 Diesel
How to replace a Ford Mondeo 3 and 4 fuel filter Business date, meeting fuel filter. this traps contaminants and contaminants in the gasoline and prevents them from entering the fuel system. This is why the cleaning element directly affects the production...
How to avoid such situations?
It is unnecessary to advise being less absent-minded, because even the most persistent of us can forget about everything under the pressure of circumstances, but there are still a couple of tips:
- make a duplicate key and keep it at home, or better yet, do not lose the second key;
- Enter into your phone the number of a company you trust and know the price list;
- reflash the ECU and remove this option (tested option);
- warm up the car with an open window or door;
- Try to develop the habit of always taking your keys with you.
