Subwoofer Lada Granta: manufacturing, installation and connection

All devices have the same ISO and mini-ISO connectors on the back.

The amplifier can have two groups of inputs:

1. linear
2. high level input

We make the connection according to any of the schemes proposed below.

There are three options for connecting a subwoofer to a standard radio: output a linear output from it, use a separate high-level converter, or connect to the high-level inputs of the amplifier. Let's look at them below.

First option

In the first option, a procedure is performed that is called “ unsolder the rulers .” In this case, the head unit is removed from the car, disassembled, and linear low-level outputs are output from its board.

They look like two regular RCA connectors. After this operation, you can connect an amplifier to them, and a subwoofer to the amplifier.

A person far from electronics is unlikely to be able to do this on his own. Therefore, it is easier to remove the head unit and take it to people who repair car audio. After the phrase “I need to desolder the rulers,” specialists usually don’t have any questions.

The process of removing the standard radio may be a little difficult. At first it seems like an impossible task. In fact, everything is simple here. You just need to read the instructions, if there are any. Or find a guide on the Internet for removing the GU. Often people post photos or videos that will help you with this.

Usually, in order to remove the standard radio, you need to disconnect the adapter frame, if necessary. Then, using two or four knitting needles, which are inserted into small holes on the radio, the latches are snapped off and the control unit is removed. Instead of knitting needles, you can use other available means, for example, thin metal strips or something else, depending on the model of the head unit.

Second option

The second option is even simpler. For an amount that can range from $20 to $100, you purchase a high-level converter , which is a plastic box with wires sticking out of it.

On one side there are “tulips”, on the other there are wires for acoustics. For example:

• Audio Control LC7i,
• Connects 2
• Hollywood HLC 3,
• Helix AFC Competition,
• Helix AAC Active,
• Carpower FGA 22HQ,
• Stinger SG N12 and other similar models.

Then you need to find the wires going to the rear speakers. They can be detected directly at the output of the head unit. To find out what wires you need, look for the pinout for your GU model.

You can also find them in the area of ​​the central pillar, before they pass through the door, this will be even easier. Wires for acoustics are connected to the transducer on one side. And the “tulips” are connected to the linear input of the amplifier using an interconnect cable.

Third option

The third option is to connect the wires going to the rear speakers to the high-level inputs on the amplifier, if available. If the subwoofer is active, that is, with a built-in amplifier, high-level inputs may also be present in it.

You can find the speaker wires that go to the rear speakers in the same way as in the second option. Moreover, cutting them off completely is not necessary. It is enough to remove the insulation and, without cutting the cable, connect the subwoofer amplifier.

Of course, if the speakers are in the rear parcel shelf and the subwoofer is in the trunk, then it is better to choose one or the other. Working together with the subwoofer and rear speakers is not recommended, as the subwoofer will interfere with the bookshelf speakers, worsening their sound.

If the speakers are in the rear doors, you don’t have to turn them off, but listen to them first.

Connecting a Lada Granta subwoofer

Connecting the subwoofer directly to the standard Grant radio will not work due to the design features of the product. In order to achieve the best sound reproduction properties, it is necessary to use an additional amplifier. Auto ULF can be of any type and design. If a single-channel device is used, then only a bass speaker is connected to it. When using multi-channel ULF, you can completely change the interior acoustic systems, which are not of the highest quality, and install the highest level acoustics with crossovers. Connecting the amplifier to Grant's standard radio begins with determining the location for its installation. Typically, a car's low-frequency unit is located in the luggage compartment, next to the low-frequency speaker.

After installing the unit, it is necessary to connect power wires and audio signal strips to it. The power is connected by a special power cable, the cross-section of which is selected depending on the power of the amplifier. At a distance of 10-15 cm from the car battery, it is necessary to install a fuse block. Its rating should not exceed 50 A. The negative power terminal is connected to the ground of the vehicle. The signal from the radio output can be supplied using 2 methods. On the back wall of the car radio there are regular rectangular connectors.

To connect LF (low frequencies)

devices can be used with contacts from blocks “B” and “C” of yellow color. They are designated ISO and mini-ISO respectively. On block “B” there are contacts for connecting the front and rear speaker systems, and on block “C” there are linear ULF outputs of the standard radio. The low-frequency auto block can be equipped with linear inputs and high-level inputs. The connection of the amplifier to the standard grant button radio can be done through the contacts of the ISO block with the index “B”. The signal created for the operation of speaker systems cannot be applied directly to the input of the low-frequency system. The output voltage is very huge and can destroy the semiconductor devices of the input circuits of the external system. To correctly connect a car radio and an external power amplifier or unit, it is necessary to use level converters. They can be purchased at any specialty store. The front panel of the converter indicates how the connecting wires should be soldered. The device connects the front and rear channels twice and reduces the output voltage level to a non-hazardous value.

The converted signals of the right and left channels are output to the “Flower” type connectors. They can be supplied to the inputs of an additional low-frequency block. There may be a problem with the laying of cable lines to the amplifier. To do this, it is necessary to use high-quality shielded wires with central copper cores. It is not recommended to use copper-plated iron wires to connect the converter and the amplification unit.

Instead of a total

• If we install a simple radio, the size should be no more than 178 * 50 mm. Installation requires plastic spatulas or a screwdriver. Adapters and slides are included .
• To install 2 din, you need a new overlay on the console, a decorative frame on the GU itself, wire cutters and a metal blade to adjust the installation location.
• Are we replacing the standard speakers with another of the same size? Still need a new decorative frame . Otherwise, gaps in the panel will be visible.

More articles about Granta here.

• How to enable aux on a Sony radio

Connecting a Grant subwoofer

The amplifier can be connected to the standard Grant Lux radio via a mini-ISO connector. This connector, located on the rear panel of the radio, carries four sound signals from the linear outputs of the built-in unit. An adapter with connected “Flower” type connectors is inserted into it. Connection of the Grant MMS subwoofer (multimedia system) is carried out through the linear inputs of the external LF (low frequencies)

block.
When connecting a low-frequency speaker, difficulties may arise with the configuration of the entire sound system. You can use standard car speakers that will work through the ISO connector. Linear outputs from the mini-ISO connector must be connected through an adder and a signal sent to the input of a single-channel block. It will only work on a bass speaker. In the adder, you can connect only the outputs to the front speakers, leaving the two rear channels free. You can use two rear channels for the LF (low frequencies)
system, and feed the two front channels to a separate low frequency unit, which is loaded onto massive broadband speakers.

Source: dinamikservis.ru

Flashing process

The most popular among motorists is the firmware of the Granta head unit. This has no effect on the sound, but adds some features that the standard interface does not have. For example, a convenient touch keyboard appears, called up from a number of programs, and the ability to access the Internet. In order to reflash the media system, you will need an SD card using FAT formatting; you can use the same card, but formatted in exFAT.

First you need to download the firmware, having first carefully searched for it on the Internet. It’s easier to find it on thematic auto forums. After downloading, copy the necessary files to the root directory of the card, having previously written them to a flash drive. Then we install the card in the slot on the radio and reboot it. Once the reboot status bar is full, you can use the expanded interface. It's worth noting that to return to features such as radio and Bluetooth, you need to remove the SD card with the alternative menu and reboot the system again.

Also on car forums you can find craftsmen experimenting with firmware that does not remove the radio and some other modes from the menu. There is information that they have somehow learned to read and decrypt data from a KAN bus suitable for the MMC. The firmware may also require screen calibration before you can work with the alternate menu. Follow the instructions and everything will be quick and easy.

How to install a subwoofer in Granta with your own hands

The sound that comes out of Grant's conventional multimedia system does not suit all car owners. And even if you like the radio screen visually and functionally, the sound quality usually leaves much to be desired.

Therefore, almost everyone is looking for different options on how to correctly install the main or additional subwoofer in the Grant in order to get the most exciting sound, in accordance with their musical preferences.

The most popular space for installing a subwoofer among Granta owners is the trunk or rear parcel shelf. This installation option is preferable because the distance from the listener to the subwoofer must be at least half a meter. Otherwise, the sound breaks and loses its acoustic properties.

Types of subwoofers

First, subwoofers are divided into active (with an integrated amplifier) ​​and passive (with an external amplifier). There are subwoofers that can be purchased completely assembled with a box; you can only purchase speakers. Almost every box is made independently, especially since its production does not take much time and speakers are installed in it.

Standard size

The most important feature of a subwoofer is its size. The subwoofer's size is the diameter of its speaker, measured in inches.

Usually in car audio they use LF (low frequencies)

speakers for 10, 12, 15 inches:

• A 10-inch speaker is 25 cm in diameter;
• a 12-inch speaker is 30 cm in diameter;
• speaker 15 inches - diameter 37.5 cm.

Subwoofer box

There are several types of sub boxes:

The most common one is a closed, sealed box, which is easiest to make with your own hands.

A case with a bass reflex is more difficult, but the sound is stronger.

• The bandpass housing can limit the frequency response of the subwoofer. It builds more power than a bass reflex cabinet.
• Free air is a method of installing a subwoofer speaker in the horizontal rear parcel shelf of a car. The efficiency of this installation for us is lower than that of a cabinet subwoofer and a special speaker is required for this type of installation.
• A stealth body is a self-fabricated body whose rear wall follows the curves of the trunk wall. This type of installation is convenient due to its compactness and freeing up more space in the trunk.

Installation of Lada Granta car radio

Tools:

• Open-end wrench 10 mm
• Small flat screwdriver
• Knife (if necessary)
• Soldering iron (if necessary)

Parts and consumables:

Notes:

Initially, in this car model, the calculation is made for a 1-DIN radio. If the owner wants to install another type, a newer one, for example 2-DIN, he will need to start sawing the partitions in the console itself. And if the size is not suitable, then a suitable cantilever frame will have to be cut into the panel. This is much more complex than the first type of installation listed. In the second option, it is better to entrust the installation to a specialist, because there is a high risk of damaging the interior trim.

Here is a description of how to install a 1-DIN radio.

1. Remove the negative terminal from the battery.

2. Remove the plastic pocket installed in place of the future radio using a flat-head screwdriver.

• Guide for connecting radios on Toyota models

3. Having taken out the pocket, on the reverse side you will find slots where ISO connectors will be inserted to connect the radio. Disconnect the connectors to completely remove the pocket.

4. Now remove the metal frame from the radio and install it in the place where the plastic pocket was. Unbend the frame's tendrils to lock it securely in place.

Preparing MMC for connecting an amplifier for Lada Granta

Installation of acoustics for Lada Granta

Components of the future audio system:

Front: Morel Tempo 6 component. Before them there were coaxial Morel (Morel Tempo 6 Coax). I didn’t take the Dins, I had them installed on the seven. I just swapped them.

Amplifier: Blaupunkt GTA-470. This system has been tested by me and time - far and wide.

I found it specifically on the market, and specifically the newest one. It was hard to find it, because this model is no longer produced. But after a long search, I finally came across one copy. Here he is handsome:

Here it is, packed

Blaupunkt GTA 470

Blaupunkt GTA 470

Blaupunkt GTA 470 for installation on Granta

Wires: Mystery MAC 4.04. I ask you not to immediately throw tomatoes, I understand that the wires are not very good))) But I took them with a huge supply of cross-section (Naturally for my system).

Wires MYSTERY MAK 4.04

Power cable - 4 Ga (25 mm2).

Positive cable with a cross section of 25 mm2

Negative cable with a cross-section of 25 mm2 and control cable 0.75 mm2

Speaker cable - 12 Ga (3.5 mm2).

Speaker cable with a cross section of 3.5 mm2

I really liked the interconnects in this kit! They are made perfectly, unlike a similar set of MAC 8.04.

The 60 A fuse is normal. Well, the terminals.

60A fuse and terminals

I haven’t bought a sub yet, I’m still looking around and saving money. So far I've been stuck on the Audio System MX-15. There will be 25 liters in ZYa. The box drawings for it and the material are already there.

Subwoofer audio system mx-15 plus for Lada Granta

It won't be a candy bar literally. I'll power it with a sub bridge.

Well, now I would like to tell you about my unconventional method of connecting an amplifier to a standard MMC. Anyone who has already been interested in the topic of connecting an amplifier to an MMC understands that a mini-ISO connector is needed for connection. I couldn't find him. I didn’t want to wait a month from China. I decided to simply bring the flowers out with separate wires. I bought the wires at an electronics store. They look like this:

So, I immediately decided to output the video input for the rear view camera. I bought this wire for it:

The radio is easy to disassemble. I won’t describe it at length, because the disassembly process is quite common. After disassembly, we see the central board:

We need connector contacts:

To pin out the contacts, I used a diagram downloaded from the internet.

After soldering, I carefully laid the wires into a bundle. In addition to the flowers and video input, I also brought out a wire for turning on the amplifier, a wire for the reverse sensor, CAN-H and CAN-L for displaying additional functions. info.

In order to pass the wires through the body, I made a small recess in it.

After assembly it looked like this:

This way I didn't have to find a mini-ISO connector.

Amplifier connection.

Simply screwing the screws into the back (as for example on 08-09) will not work in the grant. The base at the backrest consists of welded wire (cage). I decided to secure the amplifier in the following way: I took an iron strip 40 x 4. I cut out two blanks slightly longer than the length of the amplifier. I marked 4 dots on these strips along the holes in the amplifier. According to the markings, I drilled holes and cut an M5 thread for mounting the amplifier.

Then there was a problem - how to attach these strips to the skeleton of the seat back?! The most perfect option is to weld them to the skeleton. But for this you need to completely disassemble the back. I made it a little easier. On the sides of the strips I made many holes along the entire length on both sides. Then I pushed these strips through the bars of the back frame (between the foam rubber and the net). Having previously attached the amplifier to the bolts, I secured the strips to the skeleton with plastic ties. Then I unscrewed the amplifier, threw on the fabric covering of the seat back (the back side has a zipper, very comfortable), made four holes in it with an awl, and screwed the amplifier to the fasteners I made. It turned out quite durable. The iron strips were firmly attached to the skeleton of the seat back.

Reviews

Conclusion The opinions of motorists on the functionality and sound quality of the standard radio are divided, which is obvious. Everyone evaluates according to their own criteria. Some people care about sound, others about functionality, and others about control. Regardless of the type of radio: push-button or touch-sensitive, the workmanship is good. No massive breakdowns or defects were recorded. Maintenance is not expensive, parts and components are available both at official representative offices and on the Internet. Now it will not be difficult for the owner to remove the radio on the Granta liftback with his own hands without contacting a service station.

How to connect an amplifier and subwoofer to a Granta radio

Once a year, the standard radio of the Lada Granta is supplemented with new features that have long been used in foreign cars. Now we will tell you how to connect an amplifier and subwoofer to the standard Granta radio with your own hands.

1. Pull a separate reddish thick wire from the battery to the amplifier. We install a pre-flask next to the battery.

2. Ground (black wire) to the body and to the amplifier.

3. Connect the amplifier to the subwoofer (speakers).

4. We stretch the speaker wires (separately from the other wiring of the car) from the amplifier to the radio.

5. Connect the laid wire of the external amplifier to the Granta radio.

Nowadays, the extreme point raises the most questions, so we will dwell on it most carefully. Let us recall that in the previous article we looked at connecting a rear view camera to the standard radio. The camera greatly helps when parking in reverse.

Connector information:

The back of the radio is as follows:

You can immediately see the familiar ISO connector (in the photo there is a brown and grayish pad):

Also the top row of mini connectors (blue, greenish and empty connector). This connector is called mini-ISO and has the following diagram:

Now about amplifiers. Typically, an amplifier has two groups of inputs: line and high-level input. You can use any of them, and here are the details of connecting the amplifier to the standard Granta radio with your own hands.

Connecting an amplifier (via the ISO connector of the radio)

To connect an amplifier using the highest level input, you should take the signal from the output to the radio speakers (regular ISO).

This is the simplest method that is suitable for unpretentious listeners. This is because the signal going from the radio to the external amplifier has many circuits (preparatory amplifier, radio amplifier, external amplifier voltage divider, power amplifier) ​​that introduce their refractions.

Connecting an amplifier (via the mini-ISO connector of the radio)

The most difficult way to connect an amplifier. First, you will need to find a rare mini-ISO connector, which we plug into an empty connector on the back of the radio, and then high-quality shielded wires.

By making connections according to the indicated diagram, you will get the highest quality sound:

Connecting the amplifier and subwoofer to the Granta radio with your own hands has been successfully completed. Enjoy the music!

Source: vazgarage.ru

Removing the device according to the instructions

The algorithm for removing the radio if you have the keys is outrageously simple. It is worth considering in order to understand how to act if they are lost. The order is as follows:

1. Remove the front panel of the player and the decorative plastic frame, prying it up with a flathead screwdriver if necessary.
2. Insert the first key into the gap between the housing and the mounting frame, located at the end. You should feel slight resistance as the tool bends the latch.
3. Repeat the same action with the second key.
4. Grasp the radio with your hands by the protruding parts on the sides of the case and carefully remove it from the niche.

To remove the radio, 2 keys are used

Connectors for the standard radio and MMC Lada

All devices have the same ISO and mini-ISO connectors on the back.

The amplifier can have two groups of inputs:

1. linear
2. highest level input

We carry out the connection according to any of the schemes proposed below.

Specifications

When purchasing a subwoofer, you should pay attention to the following characteristics:

• peak power (W). It is with the help of peak (maximum) power that buyers are attracted. After all, car owners first of all want to know whether the system can “rock” the car with bass in order to attract the attention of others. Peak loads indicate at what level the speaker can operate most efficiently. Most often, they are approximately 3 times higher than the indicators that are optimal for long-term operation, however, devices with such characteristics are often at the very top of the rating of subwoofers for cars;

  
  Table showing the dependence of the peak powers of subwoofers on the volume of the premises

• rated power (W). The manufacturer tries not to focus on the rated power - this indicator is not as impressive as the previous one. But it is this information that tells the buyer what level of sound the selected speaker can produce without distortion. At the same time, it can operate at higher powers in optimal mode. Most car enthusiasts who decide to purchase a subwoofer are not looking for high power. Therefore, the optimal devices are those for which this indicator ranges from 200 to 300 W;

By the way, for expensive high-quality speakers there is no significant difference between peak and nominal loads, which cannot be said about cheap models. This is explained by the fact that a high-quality speaker has the ability to reproduce high-quality bass even at very high powers. This means that its rated loads are close to peak values. At the same time, the peak power of inexpensive speakers can be even higher than that of higher quality speakers. However, the rated power will certainly be lower.

There are sizes that are recognized as optimal, that is, they allow you to produce a sound that suits the majority of car owners. So, 10” is the best option for those who like not very powerful bass, and 12” is for those who like it “hot”.

Connecting the amplifier to the radio via the ISO connector

We connect the amplifier through the highest level input to the radio (speaker output).

This connection method is suitable for the average user. Music lovers are not satisfied with this method because of the huge number of circuits between the radio and the amplifier (preparatory amplifier, radio amplifier, voltage divider of the external amplifier, power amplifier), which introduce their own refractions.

Decoding problems

The main pitfall of the described procedure lies in the security code embedded in the memory of most radio tape recorders. The bottom line is this: disconnecting the music center from the external power supply for 10-15 minutes will lead to the fact that the next time you turn on the car radio, it will require you to enter a security code (usually a four-digit one), without which it will not function.

Advice. Removing the device to replace it with a new one is not a problem, unless you plan to use the old player on another machine. In any case, try not to disconnect the battery for a long time.

The device requests a code after connecting to the on-board network

If the card with the code is lost or missing, the issue can be resolved in several ways:

• when it comes to a standard device, for a certain fee they will help you find the code at a dealership that sells cars of your brand;
• there are companies and individual specialists dealing with these problems;
• the free way is to search for code using various programs.

Serial number location

Regardless of the method chosen, you will have to remove the radio from the socket to find out the serial number. It is printed along with a barcode on a tag glued to the side or top of the case. After taking out the device, rewrite these numbers, and then try to calculate the PIN code using them using various online calculators on the Internet. If it was not possible to determine the required code using this method, then remove the music center and take it to specialists in this field and prepare to pay for their services.

Important point. If you do not know the PIN code of the radio, then when searching on your own, do not enter combinations of numbers more than 3 times! Otherwise, the device will be blocked, and in this state, decoding it will cost much more.

The issue of removing a car radio from its socket is not very difficult and will not require much time. But the consequences can be unexpected for an unprepared motorist. Hence the last piece of advice: find the lost pin code before turning off and removing the player in order to save your time and nerves.

The standard multimedia system 2190 on the Lada Granta has many useful functions, but this does not mean that one day you will not need to connect additional equipment to it (rear view camera, etc.) or remove it altogether. For example, to replace with more powerful multimedia systems or, conversely, to install a double-din radio without a touch screen.

In any case, you may need to dismantle the MMC on Grant, which we will talk about now.

• 10-02-2015
• 204 396

AvtoVAZ equips modern Lada cars (Granta, Kalina, Priora and Vesta) with standard push-button radios, and in the top version (Luxury trim levels) with more modern multimedia systems (MMS) with a touch screen. In this article we will tell you how to connect an amplifier and subwoofer to the standard radio and MMC of Lada cars.

Connecting the amplifier to the radio via the mini-ISO connector

To implement this amplifier connection diagram for us, you will need to find a mini-ISO connector, which should be connected to an empty connector on the back of the standard radio of Lada cars.

Further, it is recommended to use high-quality shielded wires.

The main advantage of this connection scheme for us is the highest sound quality.

conclusions

Thus, you can always install a subwoofer in your car and achieve maximum sound quality. The main thing is to approach the organization of the process correctly, take your time and choose the right woofer (but that’s another story). Good luck.

A subwoofer is an acoustic system that reproduces low sound frequencies, the range of which ranges from 20 to 300 Hz. It is intended for use in confined spaces (for example, in a car). A properly configured subwoofer fits harmoniously into the overall playback system, making its sound richer and more saturated. So which subwoofer is better to choose for your car?