Door trims (cards) for classic VAZ 01-07 (1 part)

All videos New videos Popular videos Video categories

Main newsThe State Traffic Inspectorate is looking for eyewitnesses!”>Results of the preventive event “Safe Road””>Fire safety rules during the spring-summer fire hazard period”>Verkhnyaya Salda firefighters took part in the All-Russian open lesson”>Fire inspections and briefings in churches before Easter”>Results promptly -preventive event “Tinting”>About new opportunities and prospects for the development of “Titanium Valley”>Salda residents are increasingly becoming victims of scammers from ad sites”>Representatives of the veteran organization of the Ministry of Internal Affairs of the Russian Federation “Verkhnesaldinsky” laid flowers at the Monument to the heroes-liquidators of the Chernobyl accident NPP”>Salda police ask citizens to hang up if money is discussed”>Let’s play 0707 = Tele2 = (:HoHmA:) we’re going to Moscow”>Compact irrigator RL 210 from Revyline with fast delivery to Sochi”>Can I buy it inexpensively laptop for corporate purposes”>Orthodontic wax “Revilane” in stock in Izhevsk”>How to gain the trust of the audience? How can an expert gain the trust of the audience at a webinar?”>Compact irrigator Revyline RL 650 is available in Orenburg”>Exclusive furniture to order”>Employees of the Belgorod linear department uncovered the theft”>The day must not come►SWAN: Chernobyl Unexplored►Walkthrough►Part 3″> Is it possible to do an MRI with dental implants? Is it possible to undergo an MRI if you have dental implants? pvpu2g, pvvng-ls, pvkp2g, asbl, sbshv, aabl and others in Russia”>I will buy fluoroplastic FUM tape, FUM harness, fluoroplastic film, surplus stock in Russia”>We buy power cable in Yekaterinburg, region, surplus stock in the Russian Federation”>Fluoroplastic F4 pipe, F4PN tape, I will buy from storage, unclaimed in the Russian Federation”>I will buy fluoroplastic powder throughout Russia, illiquid stock, from storage”>I will buy insulated wire SIP-2, SIP-3, SIP-4, SIP-5, unclaimed, illiquid stock in the Russian Federation” >Fluoroelastomer SKF-26, 26 ONM, SKF-32 I will buy all over Russia, surplus, unclaimed”>Photo LASTOCHKA-OMSK”>Photo”>Photo [email protected] “>Photo west o.”>Photo Olga Gantseva (Nazarova)” >Photo VALERY TSARKOV”>Photo Sergey Reva”>Photo God is love”>Photo lalapta108″>Photo Svetlana Vlasova (Verkhunova)”>Studio headphones32 min. backDarkside is an excellent choice for all hookah connoisseurs45 min. backSteroids1 h. 2 min. backShop for manicure and pedicure1 h. 22 min. backHow to choose the right tonometer?2 hours 58 minutes. backDestruction of cockroaches3 hours 22 minutes. backtax code3 hours 41 minutes backSights of Moscow5 hours 7 minutes backMotorcycles8 hours 27 minutes backoffice with normal output9 hours 52 minutes back Last comments Anna Volkova As it turned out, the task was not so simple: to get the product certified as quickly as possible. Somewhere the cost is just exorbitant...23 hours 49 minutes. agoanna0303good afternoon! I used this article as a recommendation and ordered a portable computer from the website https://my-gadget.com.ua/ May 12, 2022 15:42:39 Website creation in Krasnodar SeoZhdanovCleaning of apartments from the cleaning service https://total-cleaning. ru/ #totalcleaningru #cleaningcompany...May 12, 2022 11:31:07 rom kov Thanks for the article! May 11, 2022 15:18:02 Igor It must be said that the Zlato brand is very praised, at least by my friends who bought jewelry from this company , but what...May 10, 2022 12:53:24grischaeva From the company you can purchase certified desigo software, Siemens controllers, sensors and other equipment...May 8, 2022 22:31:27rom kov I will say that you definitely need to study as much information as possible and read reviews on the Internet about different bookmakers, by... May 7, 2021 9:40:28 rom kov Unfortunately, banks only issue loans to those with a high salary, local registration, and official income. If you don’t have this, then... May 7, 2022 6:46:35 Lilia Razumovskaya Nice young man and educational video! My niece just wants to go to study to become a dentist)?) It seems to me that this... May 6, 2022 9:34:35 Alex1985 I recommend ordering flowers in trusted stores, I buy from Roses Delivery. , I really like Dutch and Kenyan roses....5 May 2022 13:49:44

PopularSpare parts, detailsRepairSpare parts, detailsRepairTipsAbout carsLawMandatory surveyHow much does your car cost?

IN

Re-upholstery of door cards for VAZ 2107

Elements of the interior trim wear out over time and lose their attractive appearance. The door trim of the VAZ 2107 especially suffers during operation. Door cards become frayed, deformed and begin to poorly stay in place. You can simply replace them with new “stock” ones, or you can modernize the interior by installing homemade door cards based on thicker plywood. This solution improves the durability of the upholstery and the acoustic characteristics of the interior. The base can be sheathed with leatherette (leatherette).

Dismantling the door trim of a VAZ 2107

Old VAZ 2107 door cards are removed as follows:

1. remove the window handle by pulling out the fixing bracket;
2. Unscrew the bolts under the plugs and remove the door handle (armrest);

3. remove the trim from the door opening handle;
4. remove the speaker (if installed);
5. remove the door card by pulling it towards you.

Door trims (cards) for classic VAZ 01-07 (1 part)

Restoring door trims or cards VAZ 2101 2102 2103 2104 2105 2106 2107. Today my story will be about re-upholstering cards on a plastic base and the difficulties that you may encounter. First we need to find new cards with plastic bases. Next we will need a construction stapler and staples for it. Preparing door cards for installation on the door... recommended modification ♻ - give a like/thumbs up...

Making a door card for VAZ 2107

The old sheathing should be used as a template for marking out the new one. You just need to attach it to a sheet of plywood and, using a pencil, mark the outline of the door card and the holes for the handle fastenings, the door opening lever and under the window handle axis. The latter need not be done if the car has (or will be installed) electric windows. Particular attention should be paid to the correct marking of the mounting holes. If you make a mistake, the door trim will not hold well and knock when the body vibrates.

After this, you can cut out the plywood base of the sheathing along the marked contour and drill the necessary holes. The edges of the casing and holes must be sanded.

The foam backing is cut along the finished contour of the skin, taking into account an allowance of approximately 10 mm. It is better to use a two-layer backing consisting of foam rubber and a fabric lining. This material is easier to glue to the plywood base of the upholstery. If you glue foam rubber directly, it, due to its porous structure, intensively absorbs the glue. As a result, it is not possible to achieve a uniform layer and high-quality sizing.

You can sheathe the base with a single piece of leatherette or vinyl leather, cutting it according to the size of the door card. The pattern must be made so that there is an allowance of 50 mm. This ensures that “bald” areas around the edges are avoided in case of an error. This is especially true for vinyl leather, which is subject to deformation and heating with a hairdryer during stretching.

To give a more original look to the covering, it can be made from several multi-colored pieces of leatherette, sewing them together. It is best to sew with a “French seam”, which is distinguished by good strength and attractive appearance.

When everything is ready, you can start gluing the foam backing onto the plywood. MAH glue, which is used in professional tuning studios, is well suited for this.

After gluing the backing, you need to cut it to the size of the plywood base and cut holes in it for attaching the door handle, speakers and the axis of the window handle.

Leatherette upholstery is stretched as follows:

• Place the leatherette blank on a flat surface face down;
• cover the upholstery with the door card blank, laying it down with foam rubber;
• Fix the trim with a stapler on one edge of the trim, stretching the leatherette so that folds do not form;
• make sure there are no folds;
• secure the opposite edge of the upholstery, remembering to stretch it well;
• Secure the side edges of the upholstery with a stapler.

Excess material must be trimmed after attaching the upholstery, leaving a few millimeters so that it does not begin to tear near the staples.

Interior noise insulation

A significant drawback of the VAZ 2107 is the increased noise in the cabin when driving. To eliminate it, it is necessary to soundproof the interior. This is a somewhat costly procedure, although not complicated. Sound insulation materials can be divided into three groups: heat insulators, sound insulators and vibration dampers, but on the modern market there are universal products that combine all the properties.

Note that for ease of installation, virtually all materials are made on a self-adhesive basis. Some of them must be heated with a hairdryer during installation. The first to install is a vibration-insulating material (vibroplast), which dampens vibrations of the body, engine and suspension. Next comes a sound-absorbing layer (bitoplast), which prevents extraneous sounds from entering the cabin. In order not to separate into two layers, you can take a universal material.

In addition to soundproofing materials, you will need:

• Screwdrivers.
• Hair dryer.
• Degreaser.
• Roller.
• Scissors.

Sound insulation of the underbody and wheel arches

For external treatment of the bottom and wheel arches, you must do the following:

1. Wash the car thoroughly, especially the parts being treated.
2. Let the car dry, blow out the cavities with an air stream.
3. Prepare the surface by degreasing it with special solvents, for example, white spirit.
4. Apply sound insulation to the required surfaces of the car using a spray gun or a paint brush.
5. Do not leave gaps; the mastic layer should be uniform.
6. Install fender lockers in the wheel arches and secure them with self-tapping screws.

Soundproofing doors

Soundproofing of doors is carried out in order to get rid of external noise and improve the sound quality of the acoustic system . This process is quite painstaking and requires dismantling the door trim and interior elements.

Do-it-yourself soundproofing of VAZ doors

The sound insulation kit includes only damping material, but surface treatment with sound absorbers will not be superfluous.

1. After dismantling the door trim and interior parts, treat the surface with a degreaser.
2. The first layer is to apply vibration insulation. The material is glued to the inside of the door through special technological holes. Silver vibroplast has proven itself well here. The material must be glued tightly, without missing a single millimeter.
   

   As a rule, anti-corrosive coating is applied to car doors. Remove it, otherwise the vibroplast will not stick. Before gluing the material, adjust all locks and rods to avoid rattling.

3. Next we glue the bitoplast, its thickness should be four millimeters.
4. Then you need to tape the outside of the door under the cards. This is good for audiophiles. Completely seal the access holes to seal the part of the door where the speaker is located.
5. Treatment with a vibration filter will make it possible to increase the rigidity of the door, which has a good effect on the sound of acoustics.
6. Cover the outer sides with Visomat and then with Splen.
7. After gluing, heat the vibroplast with a hairdryer, smoothing the material with a roller or palms.

Video: soundproofing door cards

Soundproofing of the engine compartment

The engine is one of the main sources of noise in a car. The work order is as follows:

1. First of all, clean the inside surface of the hood from dirt and dust.
2. Next, degrease the surface with solvents.
3. Attach a sheet of finished sound insulation to the hood and cut along the contour.
4. If you purchased material on a self-adhesive basis, simply stick it on the required surface, having first removed the protective film.
5. Be sure to add a layer of foil to improve heat reflection, protect the soundproofing layer and increase the engine warm-up rate in winter.

VAZ 2107 hood treated with vibration material

More about sound insulation of the VAZ-2107: https://bumper.guru/klassicheskie-modeli-vaz/salon/shumoizolyatsiya-vaz-2107.html

Need to replace door trim

Considering that the latest version of the VAZ 2107 rolled off the production line in 2012, the standard upholstery has long expired. VAZ 2107 door cards dry out and crack. The inner panel breaks through the outer skin; due to deformation, it does not stay in place on the door and not only spoils the appearance of the interior. A deformed panel makes it inconvenient to close the side windows.

When repairing, you can change the entire panel of the skin, replacing the old elements with a new card with stock skin. There is an option to modernize the interior and install homemade cards, choose the material that best matches the overall design of the interior.

Materials for upholstery

Drivers have hundreds of options available to them regarding which door trim material to choose for tuning their car. Most often chosen:

• auto fabric;
• thick textiles;
• genuine leather;
• leatherette option, euro leather, Alcantara.

The most affordable artificial materials remain: vinyl and leatherette. The advantage of the set is its durability and the ability to be treated with leather detergents.

Luxury door upholstery involves the use of expensive materials: genuine leather, artificial Alcantara or almara. The material is soft, stretches well, and is highly durable. The price depends on the brand and production features; rough natural leather is cheaper than processed and dyed almara with an additional layer of insulation.

Textile upholstery only has the advantage of a variety of colors. You can choose colored upholstery that will harmoniously fit into the overall style of the interior. The disadvantages of textiles include difficulty in cleaning; not all stains can be removed.

Features of dismantling

Before work on reinstalling the door trim, you need to prepare a tool. You will need:

1. Plywood sheet up to 4 mm.
2. Door latches and clips are sold as a set, matching the interior color.
3. Foam rubber, sheet up to 10-15 mm thick.
4. Material.
5. Glue.

To cover doors 2107, you can use an old part; if the factory plywood is not deformed, this will make the work easier.

Dismantling the panel proceeds in steps:

1. Pull out the bracket securing the window regulator.
2. Remove the window lifter handle. If the mechanics were reinstalled on the power window, remove the clamp covering the standard hole.
3. Remove the plugs on the door handle, unscrew the armrest bolts, and remove the element.
4. Remove the trim panel from the door handle.
5. Remove speakers and adjacent electrical appliances, if installed.
6. Carefully pull the door card towards you and remove the panel.

Dismantling takes up to 10 minutes, it is important to unscrew the bolts sequentially; if the interior has been modernized, and the door has additional clips along the edge of the card, remove them first.

Additional lighting for the VAZ 2107 interior

Changes to standard lighting

– this is an opportunity to embellish the interior and make it unique. We took the lampshade from the new Priora. It looks good and has the necessary characteristics, both in size and in lighting effect. You will need regular masking tape, a knife with a sharp blade, a marker or pencil, and screwdrivers with a 12mm wrench.

We recommend running new wiring along the right pillar. Make the wire exits in the glove compartment area. We connect the minus to the body, and the plus, respectively, to the contact of the lamp. If you want the light to come on when the doors are opened, then you just need to throw an additional wire to the limit switch in the door and that’s all.

Door card manufacturing process

The old textile or leatherette covering is used as a template when marking the new one. It is necessary to attach the old cladding to the new material and mark with a pencil the cutting lines and places for the standard holes:

• door handle fastenings;
• places for armrest bolts;
• stereo system speakers.

If you plan to replace a mechanical window regulator with an electric one, do not mark the location for the hole. At the preparatory stage, do not make any holes in the door trim.

Making a door card, which is a plywood sheet of a certain size, follows the steps:

1. Clearly outline the contours on the new sheet according to the old template.
2. Mark the locations for the holes.
3. Using a jigsaw, cut the card around the perimeter, drill holes, and process the nipple to the required size.

Prepare foam rubber. The backing can be glued directly to the art, but it is better to use a fabric backing and glue a sheet of foam rubber to the textile base. This will allow you to clearly stretch the foam and avoid overuse of glue, which is quickly absorbed. Work process step by step:

1. Glue the foam rubber in several places onto the fabric base. Let dry.
2. Using the finished card, mark the backing from the base side, leaving an allowance of up to 1 cm along the edge.
3. Glue the foam backing onto the plywood.
4. Cut the marked holes in the foam.
5. To clearly and quickly cut through the foam rubber from the door card side, pierce the center of the future hole with an awl and cut through the fabric side.
6. Trim the backing, leaving up to 10 mm allowance around the perimeter of the card.

Lada 2105 Serebryanka › Logbook › Removing the trim of VAZ 21054

A little introduction. Lada 21054 has been produced since 2005. An injection engine is already installed in the car, which delights many car enthusiasts)) There are also changes in the interior trim)) They are installing seats from the VAZ 2107 and door cards from the VAZ 2106 and 2107 cars)) There are also other innovations)) We will talk about door trims of VAZ 21054)))

Quite often, due to problems with the locks and closing mechanism of the front doors, it is necessary to remove the trim. In fact, this work is very easy to do and will take a maximum of 5 minutes to complete. The main thing is not to rush and not to break the rivets that are located on the door trim) For this we need only 2 screwdrivers: a Phillips and a flathead (preferably a longer one). 1)

It is necessary to pry off the plastic insert with a flat screwdriver, which is a decorative plug for the internal door opening handle, after which we remove it completely, since in the future it will interfere with removal:

Then you need to remove the window lift control handle, having first freed it from the plastic retainer (the retainer is visible in the photo). Removing the retainer may cause a little difficulty, but knowing what it looks like, you will not have any problems

Next, unscrew the three bolts securing the door handle, which are clearly shown in the picture. In the upper part of the handle, in order to unscrew the bolt, you need to free yourself from the plug (it is usually round). Using a screwdriver, remove it and the plug has 2 latches on top and bottom.

Now all that remains is to carefully use a thin screwdriver to pry off the door trim from any angle, and carefully

, overcoming the resistance of the clamps, remove the casing - tear it off the clips.
We read carefully.
The clips are located on the top right at the edge from the inside of the casing and on the top left and in the middle at the edge from the inside of the casing,

The door trim has been removed. As you can see, this procedure on VAZ 2105-2107 cars is performed quite simply and does not require much effort. Installation is carried out in reverse order. If anyone is interested in the price of new trims, then a set for all doors costs about 300 rubles

How to trim doors on a VAZ 2107 with your own hands

Tuning a car's interior by reupholstering the interior surfaces with leatherette makes it cozy and allows you to eliminate some of the shortcomings. Decorative door panels of the VAZ 2107 model and plastic parts are mounted on disposable polymer pistons. This installation method is cheap and technologically advanced, but is not reliable enough; over time, the panels begin to emit a strong creak. Tuning with modifications to the interior will make it possible to eliminate this problem.

It is proposed to use a sheet of plywood 4 mm thick as the basis for the door panel of a VAZ 2107 car. To make a part with your own hands, you will need the following materials:

1. leatherette in one or two colors,
2. foam rubber 10 mm thick as a backing;
3. decorative bolts and fastening units with appropriate internal threads.

The panel usually houses the speakers of a music center, for which purpose overlays of the desired shape are made on them. If you have certain skills in working with the material, additional tuning is possible with the installation of very convenient pockets.

Installation of silent locks VAZ 2107

Probably every owner of a VAZ 2107 noticed how poorly the standard door locks work. Sometimes they close poorly or make characteristic sounds. In general, you want the doors to work perfectly and with the least noise. There is a way out of this situation and let's look at it. Below is a brief instruction on how to replace standard locks with modern ones, similar to those of a foreign car, using the rear doors as an example. Similar operations are performed for the front doors.

Procedure. Materials

You should prepare in advance:

— Locks from figure eight (they are cheaper and of higher quality) — A set of silent locks, which are popularly called chocolates. — There are four bolts. — A drill and a set of drills for it. — A hacksaw for metal — A set of files — A couple of meters of cable — Rods from the “Constructor” set — Aluminum or plastic plates 10 x 6 cm. Thickness two millimeters. — Tools for cutting threads in metal.

Manufacturing of panels

Refinement of the VAZ 2107 interior begins with the dismantling of interior parts; the upholstery is removed from the internal surfaces of the body using a regular screwdriver. First, the window lifter and lock opening handle, as well as the large plastic handle, are removed from it. A flat screwdriver is inserted between the panel and the body and, acting as a lever, the resistance of the piston is overcome.

The door panel is removed and laid on a sheet of plywood, and its outline is traced using a pencil. To make a durable base for upholstery with your own hands, use a jigsaw; after the workpiece is cut, its edges are processed with sandpaper. The production of two-color sheathing is carried out using a sewing machine, the fabric is stitched, a backing is glued to the base, on top of which leatherette is fixed.

Installation of panels

On the VAZ 2107 door body, you install special bushings with internal threads yourself. Holes are pre-drilled on the panels in appropriate places, and decorative bolts are passed through them. When attaching the bushings, you must carefully follow the installation instructions to avoid turning the part. This mount allows you not only to visually tune the interior, but also to eliminate knocks and squeaks during the trip.

The door panels of the VAZ 2107 car are placed in place and attracted to the base using decorative bolts. This installation method is highly durable and provides optimal conditions for the operation of audio system speakers. Self-tuning by reupholstering the car interior with leatherette transforms the interior into a real work of art.

DIY door trim for VAZ-2107

The standard door trim on the VAZ-2107 is not very attractive and often spoils the whole picture of the interior. Many owners of “Sevens” tune their cars, and one of these types of modernization is replacing the door trim. The VAZ-2107 car is equipped with cheap materials that are not reliable and begin to wear out over time. Let's pay attention to the question of how to replace the door trim on a VAZ-2107 car, what is needed for this, as well as how to dismantle the standard door panels.

Door cards for VAZ classics part 1

When I removed the original ones, old and warped, the caps simply broke off and remained in the holes on the doors. He placed the card against the door and, looking through the crack, carefully punched a hole in the card with an awl opposite this nylon piston. I took a pre-purchased screw (for wood) and carefully screwed it into the hole from the awl directly into the nylon. I bought the screws at a hardware store and chose the prettier ones with wide heads, white ones with a coating, they are called with a press washer. But removing cards is a pleasure - unscrew 4-5 screws and you're done. And by the way, they are almost invisible on the black surface of the card; you need to run your eyes and look for where the screw is.

Soundproofing door cards. Replacement of factory pistons. VAZ 2107

The ideal material for quickly reupholstering VAZ 2101-2107 doors is vinyl artificial leather, which is also called leatherette. However, modern vinyl artificial leather has much greater strength and ductility than the familiar leatherette. In addition, on the market you can see a large number of different types of it, which differ not only in color, but also in texture. When choosing vinyl artificial leather, you need to pay attention to its ductility - vinyl artificial leather with increased ductility is called automotive leather, as it tends to fit decorative protrusions and interior parts well. Noise insulation: insulating tape 3008v 1mx1.20m 4 mm -256 rubles Piston for trunk upholstery double 2 rubles Installation…

Improvements. Door cards in diamond shape for VAZ 2107

In order to install the door card, I advise you to stock up on the latches on which it is attached, since very often they simply break during removal. Next, you should very carefully press the card with a screwdriver until the latches come out of their places. Well, after removing the card, you should wash it as best as possible, clean it from dust and wipe it. To the topic of improvements I decided to add diamond-shaped door cards for the VAZ 2107.

Trim, door cards VAZ 2101 – 2107 red

The standard door trim on the VAZ-2107 is not very attractive and often spoils the whole picture of the interior. The VAZ-2107 car is equipped with cheap materials that are not reliable and begin to wear out over time. Let's pay attention to the question of how to replace the door trim on a VAZ-2107 car, what is needed for this, as well as how to dismantle the standard door panels. Door trim for VAZ 2101, 2102, 2103, 2104, 2105, 2106, 2107, covered with red leatherette. Includes 4 cards. From the back...

Homemade acoustic cards for a loud front (part 1)

After covering the card, you can trim off any excess material. To prevent the upholstery from tearing at the place where the brackets are attached during operation, it is recommended to leave a small margin on the back side. Tuning of this kind is quite simple, and is carried out by analogy for all remaining doors. Below is a photo of car doors with the trim altered. In this video we start making door cards with podiums for a loud front. I'm on VK Instagram...

Nuances when replacing door trim on VAZ 2106,2101

There are two ways to update the ceiling lining of a VAZ 2101: reupholster the ceiling by removing the old upholstery, or simply glue a new layer of fabric onto the existing one (it is advisable to place a new sound-absorbing layer between them).

Tuning Beard VAZ

It is very easy to make cards on the VAZ-2107 door with your own hands, especially if you have a handy tool. Before starting work, you will need to have patience and time, since it can take up to 3-4 hours to make one upholstery. How to move the gearbox Tuning Beards VAZ 2101 VAZ 2106 VAZ 2107, Lada Lada Kopek central...

Car audio VAZ 2101-2107 installation of front speakers.

Each part of the old cover must be pressed tightly against the new material; it is advisable to place a weight on top or secure it with pins. Installing a sound system in a car. Pioneer car system. Do-it-yourself car audio. Full construction…

DIY podiums. Door cards. Car audio SQ

All that remains is to cut a hole(s) for the door handle (and the window handle, if you have manual ones), and also pierce/carefully cut through the leatherette in the places where the mounting bolts will be. And you can carry it to your VASE to put what was created in its rightful place. In this video I will show you what podiums look like in (car) doors, with my own hands, a 3-lane front in a VAZ 2107. Car audio...

How to Install a Central Lock with Your Own Hands!

Cut a new frame from plywood along the contour with a jigsaw, not forgetting to make holes for the door handle, window handle, etc. I explain in detail and clearly how to install central locking in a car with your own hands. To plug…

I restore your door cards/door trims))))

Thus, with a little time and money, you can not only improve the technical characteristics of your car, but also give it an individual, unique look. Read more about all the methods of tuning the VAZ 2101 on our website. Restoration of door cards, OVA) According to option No. 1, transition near the door opening handle – 800 UAH (for two...

More on the topic

Carburetor adjustment for VAZ 21083 DaAZ diagram

How to open the hood with a screwdriver on a VAZ 2109

Lada Kalina engine does not start 1.6

How to install a kayaba shock absorber on a VAZ 2114

How to make a puller for a VAZ pump

How to install the engine on a VAZ 2109 yourself

Replacing glass on a VAZ 2107 with your own hands video

VAZ 2106 does not respond to carburetor adjustment

How to remove pipes from a VAZ 2107 stove

How to install a second pump on a VAZ 2107

How to remove a VAZ 2106 engine from the cushions

How to clean and lubricate a vase lock

Categories

Welcome! Car door trim - it undoubtedly gives a different look to the car when you sit in it inside the cabin, because if you remove it, you can see the inside of the door, as well as the wires (If the door has electric windows), and this is often very unsightly, but Who knows, there are people who don’t pursue beauty and thereby create a sports car (In this case, everything is removed from the interior and only the steering wheel and one driver’s seat remain), but still not everyone needs this and therefore the trim will be in the car for a very long time (You could even say all your life) take its place in the cabin, while covering all the parts on which it is installed.

Note! In order to change the trim, you need tools, namely: You will need a screwdriver, in addition to it, we also recommend that you immediately buy holders at the auto store that hold the trim on the car door (There are seven holders in total that attach only one trim to the door, respectively, if you decided to change the entire door trim, you will need to stock up on 28 holders, they break very often because they are disposable and the broken ones are replaced with new ones, which cost a penny in the store)

Summary:

When should you replace your door trim? Everyone decides for himself when he needs it, someone changes it if the casing is torn, and someone changes it because it is very dirty (in paint, for example), but if it is very dirty, then do not rush go to a car store and buy a new one, try to wash off traces of dirt from the old one, if necessary, use special plastic cleaners or car interior leather cleaner, they clean well, in addition, they refresh the color of the part and give them a new look, and if you use them regularly, they will protect parts from their premature aging and the appearance of small cracks on them.