Currently, many car enthusiasts are asking the question: why doesn’t the driver’s door open (despite efforts) on a new or not so Priora? It is worth noting in this regard that all problems mainly arise from the fault of the central locking. The situation is aggravated by the fact that the owners simply do not find the necessary information.
The main signs of a malfunction in the locking system installed by the manufacturer on Priora are as follows:
- the door does not close;
- does not open;
- unlocks on its own.
Moreover, car enthusiasts often complain that it is impossible to open the lock with a key, from a key fob or from the inside.
In reality, in about 90 cases out of a hundred, the culprit of the malfunction is the lock installed directly inside the driver's door.
Device
The weakest point of the Priora locking system is the microswitch. The electrical package itself, used on the model in question, is a rather complex device. It is his responsibility to receive the owner’s command to unlock or lock the door. Having received a certain signal, it activates certain electrical networks that supply the drive. In this case, the electrical package can perceive orders in two ways at once:
- from the key fob;
- from microswitch.
Operating principle of the central lock
The system of this device consists of the following elements:
- main electronic control unit;
- push-button door switches;
- door electronic control devices;
- window lift drives;
- limit switches for closing windows and doors. When closing, the central locking sends signals here to prevent arming of a car with open windows. Therefore, often failures when closing doors are associated with violations of the window control.
For example, the domestic one installs a central locking system on all versions of the Kalina model, which works with a remote control. Inside the cabin, on the driver's door handle there is a central locking button. It can be controlled from the driver's seat.
In addition, the ignition key can be used as a remote control. One press will open the driver's door, two will open the other locks. To lock the car, you need to hold the button once for a long time.
Trunk control is not available on all models. In addition, there is also a rear door locking feature designed to protect children.
The door does not open in cold weather
Most often this happens after washing a car or driving in the rain, when dampness gives way to negative temperatures. Usually the larva freezes completely in the lock. Sometimes the lubricant in the drive or rod also hardens.
Knowledgeable car owners advise warming up the constipation (for example, with a hairdryer) and then lubricating it with WD-40. Moreover, the procedure must be repeated after each significant wetness of the car.
In addition, it will also help:
- turning on autostart with constant heating of the interior;
- disassembling the door and adjusting the lock components;
- use any silicone-based lubricant.
Repair of electric central locking
Central locking systems with solenoids are factory installed on domestic cars. Such systems begin to malfunction after a year or two, for example, the passenger door does not close from the central lock, or the central lock closes and opens immediately. The reason for this is the sensitivity of the system to humidity and temperature changes. The solenoids begin to “stick,” which subsequently leads to their complete failure. The way out of the situation is to disassemble each of them, clean and apply new lubricant. It is better to immediately replace the solenoids with drives with motors.
If the central locking does not close the rear doors, or other incomplete operation is noted, the reasons can be sought in the following:
- broken contact in the supply circuit;
- relay problems;
- poor contact on the motor/solenoid;
- wear of gears or other moving elements of the activator;
- burnt motor/coil winding.
In this case, it is optimal to start repairs by testing the power supply to the drive that does not operate. When you turn on the “close” mode on the remote control, power should flow to the first wire - this moment is recorded with a multimeter. When you try to open the central locking system, the voltage disappears on this wire and appears on another. If the test results are exactly like this, then the problem is in the drive itself, which is easier to replace with a new one, since not every malfunction can be eliminated, especially on your own.
If the problem is in the wiring, you will have to test the entire circuit up to the activator separately. The most common problem is a break in the wire running between the door and the body. Despite its placement in additional corrugated insulation, a break or break in this place is commonplace. Therefore, checking the wiring can be started from here, but if after restoring the wiring the power is not restored, the problem may lie in the relay or the wiring after it. Possible problems with central locking are described in the video:
If the door does not open with the key fob
First of all, you should make sure that the button itself is working. The battery often runs out.
Further, if the indication goes off after using the key fob, then most likely the wires leading to the lock installed directly in the door have simply frayed.
This, in particular, is also indicated by non-working window regulators.
In such a situation, you will have to disassemble the door (that is, remove the trim from it) and check the integrity of the chains. It will also be necessary to inspect the fuses - they usually blow out from the slightest overload, and their damage leads to failure of the locking system.
Another common factor is a poorly charged battery, because it is from it that all systems installed on the car are powered. In cold weather, as you know, the battery discharges the most. Moreover, if the battery is disconnected for a while, then the immobilizer often starts to work incorrectly.
Sometimes mechanical problems can interfere with opening, but in this case the door cannot be unlocked with anything.
Electronics
In addition to the reasons described above, the problem may lie in small electronics. The check should begin with the key fob. First of all, the battery and the condition of the buttons are checked. Perhaps they stick and do not work at the right time. If the board itself is faulty, the key fob simply will not respond to external stimuli. The LED on its body will not light up. It's good if you have a spare key fob. Otherwise, you will have to change the alarm, or find exactly the same key fob.
Next, the alarm control unit is checked. The verification method is usually indicated in the instructions. Lastly, they check the microboard located on the central locking drive motor. At the same time, they look at the condition of the drive itself. All failed parts are replaced. The most difficult thing is with the control unit. It is practically beyond repair. Therefore, it is much easier to install a new alarm. Sometimes the key fob loses synchronization with the unit, then it will have to be reprogrammed.
What to do if it doesn’t unlock from the inside
Experts say that, most likely, such a nuisance occurs due to a slipped rod. The thing is that at the end of the cable that unlocks the lock, there is a white plastic lock. This part is very unreliable and often breaks or simply falls off. The problem is easy to fix - just remove the casing and replace the damaged element or put the cable on the rod.
Peculiarities
Unlike other models coming off the assembly line of the Volzhsky Automobile Plant, the Priora does not have a separate control unit on the central lock. Its functions are performed by a single electrical package controller. In addition to this unit, the vehicle protection system installed at production also includes an APS-6 type immobilizer. Thanks to this, the car owner does not need to install an additional security system on his car.
In reality, there are quite a lot of reasons for the central locking malfunction. Problems often arise due to:
- controller;
- keys;
- immobilizer;
- driver's door lock;
- broken wiring;
- shorting it to the ground of the car, etc.
If this or that problem occurs, you should pay attention to the window regulators, as well as the adjustment of the mirrors. If they do not function, then, most likely, the failure occurred due to a malfunction of the signal wiring coming from the 5th pin of the driver's door module or from the 5th pin of the HZ terminal, which supplies the controller itself.
Also, quite often, the failure of the central locking is caused by a malfunction of the immobilizer itself, because both of these elements are interconnected.
A breakdown in such a situation will be indicated by an audible alarm and flashing indicators.
Below we describe the most common breakdowns with central locking in Priora and ways to eliminate them.
How to remove the rear trim on a Priora
If the car has a full power package (front and rear electric windows), the procedure is practically no different from dismantling the front panels. If manual window drives are installed on the rear door trims, proceed according to the following scheme:
- Prepare a thin flat-head screwdriver. Use it to pry the handle lock and press it away from the round socket (it is located right next to the casing).
Important! Gently apply force with a screwdriver to the plastic elements. They “don’t like” strong pressure.
- Move the latch so that it comes out of the socket. Take it off.
- Pull the window handle and the base itself out of the mechanism shaft.
- Unscrew the screw securing the door opening housing with a Phillips screwdriver.
- Slowly pry up and remove the panel.
- Using a Torx T20 bit, unscrew the inner panel handle. We remove it from the latches.
- We unscrew the cap of the locking mechanism by hand.
The casing is freed from attachments, you can begin to dismantle it from the plastic clips. The procedure is the same as for the front door, except there are no screws at the bottom of the trim.
Product delivery options
Note! Below are the shipping methods available specifically for this product. Payment options may vary depending on the delivery method.
Detailed information can be found on the “Delivery and Payment” page.
Parcel by Russian Post
Available payment methods:
- Cash on delivery (payment upon receipt)
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Shipping throughout Russia. Delivery time is from 5 to 12 days.
Parcel by Russian Post 1st class
Available payment methods:
- Cash on delivery (payment upon receipt)
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Shipping throughout Russia. Delivery time is from 2 to 5 days. More expensive than regular delivery by Russian Post, approximately 50%. Parcel weight up to 2.5 kg
Express Parcel EMS
Available payment methods:
- Cash on delivery (payment upon receipt)
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Shipping throughout Russia. Delivery time is from 3 to 7 days. More expensive than regular delivery by Russian Post, approximately 100%.
Transport companies
Available payment methods:
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Delivery is possible to any locality where there is a representative office of the transport company. Delivery time is from 2 to 10 days. Sending large parcels is approximately 50% more profitable than by Russian Post.
Courier delivery in Togliatti
Available payment methods:
- Cash upon receipt
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Delivery time from 1 to 12 hours.
Pickup from our warehouse
Available payment methods:
- Cash upon receipt
- Credit, installments
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Pickup times must coincide with store opening hours.
Are you going to buy door cards or disassemble the existing door trim on your Lada Priora, Kalina 2, Granta, Datsun? Before carrying out this procedure, make sure to purchase new fasteners for the door trims. Otherwise, you may find yourself without these fasteners, since standard fasteners are usually disposable.
As a replacement for the standard hedgehogs, we recommend you reinforced Raymond upholstery fasteners, which are suitable for use on Lada Priora, Kalina 2, Granta, Datsun cars. These door card latches are currently the most expensive and high-quality among those that exist on sale.
If you need to replace the clips on all four doors, you will need four sets of these door trim clips. Therefore, be careful when placing your order. Reinforced latches are designed for use with both standard and tuning door cards. for example, like the new factory black door trim for the Lada Priora.
Article rating:
Which pistons are better for PrioraLink to main publication
Related publications
How to make the Volga more economical
VAZ 2170 | Removing, installing and adjusting doors
Removing, installing and adjusting doors
Car doors have significant weight, so it would be wise to enlist the help of an assistant.
REMOVAL AND INSTALLATION
1. Remove the interior trim panel and the film insulating screen (see Section Removing and installing interior door trim panels). Disconnect the contact connectors and push the electrical wiring through the technological holes in the door frame, thereby ensuring the possibility of free dismantling of the latter. 2. Open the door all the way and support it with a jack or wooden blocks. Note: To avoid damage to the paintwork, place a layer of rags between the jack head and the edge of the door.
Open the Lada Priora. Price
Finding yourself in a hopeless situation, when access to the car is blocked by a locked door, and the key is left in the car along with a spare pair, only one quick solution comes to mind - break out the window. However, this is not so easy to do, and possible damage and inserting a new one will be expensive. You should not fall into despair and resort to such drastic measures. This is not the only solution to how to open the Lada Priora.
Contact a professional company
. Our price for opening the door of a Priora is low, the exit is carried out promptly
and the work is done
quickly
.
Our technicians have all the necessary equipment in their arsenal that will allow them to perform auto opening procedures efficiently and without damage
.
Before you open the Priora yourself, think about the possible consequences and cost of restoration work. It is best to trust the specialists. We provide our services to residents of Moscow and the region around the clock.
Removing and installing the door opening limiter VAZ 2170 Priora
Door closers, door stops with 3 fixing positions for Lada Priora (also called door stops)
Car door stops are special devices that serve to protect car doors from various types of damage. This app. the part is simply necessary in the door mechanism, since with its help the doors open and close silently, and also increases the service life of the structure. If previously the limiters had only 1 fixation mode, now there are 3 of them. That is, a middle mode has appeared in which the door is fixed in a half-open state, which is very convenient if you had to park close to a neighboring car or other obstacle. Replacing old door closers with new ones is not difficult for any car owner.
Includes: 4 door closers.
Applicability: Lada Priora VAZ 2170, 2171, 2172
Door closers with 3 locking positions for Lada Priora (VAZ 2170,2171,2172)
Frequent use of any mechanisms leads to breakdowns, wear and other damage. This also applies to vehicle components. To get into or out of the car, you need to open the door. This is done using a special design - a handle, a lock and a latch.
The latter is a part that serves as a limiter. It helps prevent various types of damage to the door. In addition, the spare part serves for the following purposes:
- silent door opening;
- extending the service life of mechanisms;
- maintaining the appearance of the body.
In the absence of a latch, the door opens too much, which can lead to a collision with the fender, a nearby car, a pole or a tree. To avoid this type of damage, clamps are installed on the mechanisms.
practical guide
The right and left front doors of the car are similar in design. The work is shown on the front left door. All right front door equipment is removed and installed in the same way. When removing the upholstery, there is a high probability of damage to the holders. Therefore, we recommend purchasing spare holders (8 pcs.) in advance.
We remove the limiter to replace it, as well as when repairing the door (straightening, painting).
To avoid damaging the door, do not swing it open after removing the door stop.
1. Remove the door trim and remove the plastic film.
2. Using light hammer blows through a drift, knock out the axial pin of the limiter rod upwards.
3. Using a 10 mm socket wrench, unscrew the two bolts securing the door opening limiter.
4. Remove the stopper from the door.
We install the door opening limiter in the reverse order and lubricate it with grease.
We remove the glass when repairing the door (straightening, painting).
VAZ 2170 | Removing, installing and adjusting doors
Removing, installing and adjusting doors
Car doors have significant weight, so it would be wise to enlist the help of an assistant.
REMOVAL AND INSTALLATION
1. Remove the interior trim panel and the film insulating screen (see Section Removing and installing interior door trim panels). Disconnect the contact connectors and push the electrical wiring through the technological holes in the door frame, thereby ensuring the possibility of free dismantling of the latter. 2. Open the door all the way and support it with a jack or wooden blocks. Note: To avoid damage to the paintwork, place a layer of rags between the jack head and the edge of the door.
3. Remove the bolt securing the door opening limiter.
4. Trace the hinge strips with a marker, marking their position on the door.
5. Remove the mounting bolts and, with the help of an assistant, carefully remove the door assembly from the car. Installation is in the reverse order.
1. The correct position of the door in the body opening is critical from the point of view of the proper functioning of the door assembly. First of all, you should evaluate the amount of play of the axial pins of the door hinges. Open the door completely and move it up and down. If the door play exceeds 1.6 mm, the hinges should be replaced. 2. To adjust the door position in the vertical direction, loosen the hinge bolts on the car body (access to some bolts is limited, so a specially shaped wrench may be needed). The door can be considered installed correctly when, in the closed position, its upper edge is parallel to the cut of the car roof, and the lower edge is parallel to the threshold line 3. The door is aligned longitudinally by loosening the bolts securing the hinge strips to the door frame; again, a special key may be needed. The front edge (back near the rear door) of the door should be flush with the surface of the wing. 4. Proper operation of the locking mechanism can be achieved by adjusting the position of the lock striker in the vertical direction. To estimate the amount of displacement, trace the striker base plate with a marker. Loosen the fasteners and make the necessary adjustments - the latch should engage with the central part of the firing pin.
5. Finally, adjust the position of the striker in the horizontal direction - the closed door should be flush with the surface of the rear fender pillar/panel and lock properly.
Stories from our readers
“Fucking basin. "
Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.
Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet. You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, they call it Forex. But when I started delving into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums, studying trading strategies. I tried it on a demo account, then opened a real account. To be honest, I didn’t manage to start earning money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day. I managed to get the car buy after half a year, but in my opinion this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, I have more free time for myself and my family. You’ll laugh, but I work directly on the phone)) If If you want to change your life like me, then here’s what I advise you to do right now: 1. Register on the site 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY! I also advise you to download the application to your phone, it’s much more convenient to work from your phone. Download here.
To be honest, I can’t even imagine how the door will close after these upgrades; apparently silent locks will become completely silent
