AutoNews / Reviews / Tests
How to Remove the Door Trim of a VAZ 2107 Video
Replacing the door trim on a VAZ 2101-VAZ 2107
door trim certainly gives a different look to the car when you sit in it inside the cabin, because if you remove it, you can see the inside of the door, as well as the wires (If the door has electric windows), and this is often not very beautiful, but like there are people who do not pursue beauty and thus make a sports car (In this case, everything is removed from the interior and only the steering wheel and one driver’s seat remain), but still not many people need this and therefore the trim in the car it will take its place in the cabin for a very long time (one could say even a lifetime), while covering all the parts on which it is installed.
In order to change the trim, you need tools, specifically: You will need a screwdriver, in addition to this, we also advise you to immediately purchase holders at the auto store that hold the trim on the car door (There are seven holders in total that secure only one trim on the door, Accordingly, if you decide to change the entire door trim, you will need to stock up on 28 holders, they very often break because they are disposable and the broken ones are replaced with new ones, which cost a penny in the store)
When should you replace your door trim?
Everyone decides for himself when he needs it, someone changes it in this case if the casing is torn, and someone changes it because it is very dirty (In paint, for example), but in this case, if it is very dirty, then don’t rush go to a car store and get a new one, try to wash off traces of dirt with the old one, if necessary, use special plastic cleaners or car interior leather cleaner, they clean well, in addition, they refresh the color of the part and give them a new look, and if you use them often, then they protect parts from early aging and the appearance of small cracks on them.
How to remove the door card on a VAZ classic 2106
After watching my video
, You will see “How
to remove
door
panel (
trimming
) on
a VAZ
classic 2106”, how not to break the clips,...
Soundproofing door cards. Replacement of factory pistons. VAZ 2107
Noise insulation: insulating tape 3008v 1mx1.20m 4 mm -256 rubles Piston for trunk upholstery double 2 rubles Installation…
How to replace the door trim on a VAZ 2101-VAZ 2107?
1) To remove the trim, at the beginning of the operation you will need to remove all the plugs that cover the screws securing the door handle to the car with a screwdriver, and after the plugs are removed, pick up a screwdriver and use it to remove all the screws that secure the handle and then remove it from the car door.
2) After the handle has been removed, proceed to removing the handle that raises and lowers the window at the car door. To do this, use a screwdriver as shown in photo number 1 to press the socket away from the lining, then slide the lining along the handle for lowering and raising the glass and remove it. (see photo 2), then remove the handle itself from the slots on which it is put on (see photo 3) and finally remove the socket itself, which is located under the handle and which you pressed out a little earlier (see photo 4).
3) Next, use a screwdriver to pry up the door handle trim in the place indicated by the arrow and then remove it by threading it along the handle itself.
Communities › Car audio › Blog › Door cards in 2101
Since they write about Zhiguli here, I’ll post what I did last winter, not great of course, but at least that’s it)
Please don’t kick me too hard, I haven’t been a member of the community for even a month, I didn’t know a lot of things when I did it, and actually the car is for every day, not for competitions, that’s why everything was done in a simple way =) since we bought a Kicx GFQ 6.2 for the front, and my front cards are molded from fiber into ovals, and you can’t redo them, in general, I had to think again... I said one thing right away - no fiber, I’m tired, it’s not realistic to breathe this muck when you’re sanding - then everything itches, I don’t want to... climbed I looked at different options on the net, mostly nothing normal, either heavily stuck on, or some kind of garbage... I came across a link to how someone made maps for the field, I liked the design, it looks like the podium fits the din, it’s not just straight, and the shape itself is similar to something more or less standard, without super-duper bells and whistles, so I settled on it, but with my own modifications) since I wanted to install the music normally, I had to make cards from plywood so that there would be rigidity, and not hang on the snot... cut it out according to the dimensions of the 9mm plywood frame, marked out the main components and shapes of the convexities
Next, we take extruded polystyrene foam and cut it out the way we want to blow out the cards.
well, attaching dins to polystyrene foam is a perversion))) after all, we want it to sound normal, we took normal components, now we must not spoil them with installation) in general, I took 10mm plywood and sawed a ring, under the din there were two spacers of 10 each and on the outside there were mesh another 10mm ring, total under the din itself is 29mm of plywood + the top ring around the mesh also I think will help them, that means another +10 mm bonus) I’m just kind of tired of the meshes sticking out, somehow it looks like a collective farm, with recessed ones it’s much better, closer somehow to the factory or something)
Then we grind the polystyrene with a belt sander to what we like, the corners are easily rounded with ordinary sandpaper, we cut out a hole for the podium and screw it on, we fill the cracks with foam...
Well, so that the foam wouldn’t stand out, I decided to putty the whole thing... I also smeared it in some places where there were small flaws... but that wasn’t the case (((somehow I screwed up, the putty corrodes polystyrene just like polyester resin, so instead of a smooth surface I got even more holes ((((
and then my crazy nerves began to fail, I didn’t even want to continue anymore, my hands gave up...
a couple of days passed, the toad again began to choke that the speakers had been bought, but I wasn’t listening to them, I went to the garage to try other methods... first of all I started with the easiest thing - soak it in the most ordinary PVA, soak it, everything is dry, the glue really absorbs into the top layer and makes it’s even stronger, it’s a buzz, but it didn’t work with putty (((since it adds strength - I still missed both cards)) then, since polyester dissolves it, and epoxy is a natural product, then you need to try it) mixed it a little, anointed it waste, let it dry, checked - everything is ok, the putty doesn’t eat up anymore, so we’ll do it like this =) the next day I take the same glue
Interior tuning, VAZ 2101-07 (door trim) | Topic author: Hana
Door trims for VAZ 2101-2107 (set).
Andrey (Atilano) Not bad, it’s really cheaper here. a little =) Podiums VAZ 2105, 2106, 2107, from 450 rubles to 1150.00 rubles. Delivery throughout Russia. Both by mail and transport companies https://avto-vs.ru/index.php? category > Dmitry (Newell) how to buy
Alexey (Curumo) We spend a significant part of the day behind the wheel of a car, so the comfort and appearance of the car dealership play an important role for the modern driver. Upholstery of the car interior is something you should pay special attention to. Have you bought a new car, but you are not satisfied with the appearance of the interior? Have you purchased a used car and need to fix any defects? Our company has been reupholstering and tuning interiors for over 10 years! Individual approach to each car! You choose the color and quality of the material yourself! Low prices! https://www.arsenal-sof.siteedit.ru Questions in PM!
Dmitry (Newell) Gregory, is it still for sale? Economy cost with fittings?
Timur (Valerio) Gregory, is it still on sale?
Azat (Leanna) Please tell me where I can buy these? Or who can do it. Describe in PM
Dmitry (Newell) Azat, I’m looking for these myself, but it looks like I’ll have to do it myself
Rasul (Kiriah) good day! Excuse me, but is it possible to order upholstery from you?
Alina (Vayshon) Good afternoon! I have been to the service https://www.grandvitara-club.ru/ many times and really liked it! During the inspection, everything was explained and shown. The car feels great after the service, in general, after the official service it’s just paradise! Now I know where I will be served. I recommend!
Alyona (Kaheka) Gregory,
Andrey (Atilano) How to buy where you are
Nikita (Gallager) No longer made
Dima (Everardo) Grigory, is there delivery throughout Russia?
Andrey (Atilano) How to order or buy euro upholstery
Eduard (Kirandeep) Where do you do it in the Rezan region?
Materials for upholstery
Drivers have hundreds of options available to them regarding which door trim material to choose for tuning their car. Most often chosen:
- auto fabric;
- thick textiles;
- genuine leather;
- leatherette option, euro leather, Alcantara.
The most affordable artificial materials remain: vinyl and leatherette. The advantage of the set is its durability and the ability to be treated with leather detergents.
Luxury door upholstery involves the use of expensive materials: genuine leather, artificial Alcantara or almara. The material is soft, stretches well, and is highly durable. The price depends on the brand and production features; rough natural leather is cheaper than processed and dyed almara with an additional layer of insulation.
Textile upholstery only has the advantage of a variety of colors. You can choose colored upholstery that will harmoniously fit into the overall style of the interior. The disadvantages of textiles include difficulty in cleaning; not all stains can be removed.
Acoustic shelves and podiums for cars. (Saratov) | Topic author: Batilde
⚡⚡⚡ARE YOU LOOKING FOR QUALITY AND CHEAP COVERS (DOOR CARDS) FOR VAZ 2101-2107? THIS IS FOR US! 2500 PER SET! Cards with ECONOMY podiums for 16th speakers. ✅With pockets for small items. ✅Easy to install on standard clips. ✅A simple solution to refresh the interior and improve the sound. ✅We ship within Russia by Post and transport companies. Write in a personal message or ☎☎☎ Calls/Viber/Wats App+79271631611 ➡Site: http: www.autoobshivci-shop.com ➡On Odnoklassniki: https://ok.ru/akustiches ➡In Contact: https://vk. com/obshivki_class
