It is impossible to describe detailed instructions for installing a Starline alarm system, since it cannot be universal: the cars are different, and the alarm models are different.
Over the past 10 years, Starline has produced so many different alarm systems that only a professional auto electrician can count their exact number.
The article provides superficial information on the main details that an ordinary car enthusiast will encounter if he decides to independently install an alarm system of this brand on his car. You should not despair and start planning the costs of visiting a service station, because it is quite possible to install an alarm yourself, you just need to have minimal tools and documentation. No matter what model you purchased, installing a Starline alarm system is impossible without the main document - a pinout diagram for all wires; for example, the picture below shows the StarLine A91 diagram.
Typical connection diagram for Starline a91 dialog It is sold together with the alarm system. In addition to this diagram, you will need the official wiring diagram. If there is no installation map for your car model on one site, keep searching and you will find it, you can ask around for a good site with maps on the forums. If you have found a mounting card for your alarm model for your car, consider that you have made the installation process much easier for yourself. Below we provide a screenshot demonstrating that the card contains the most detailed instructions, following the points of which there should not be any significant problems. But let's move on to the installation.
Tools and additional materials you will need
You should immediately purchase all the necessary tools so that the Starline installation takes place in one go. It is worth warning that the standard set of wires will most likely not be enough, so buy additional ones in advance.
- Multimeter – preferably electronic, as it is more convenient to use;
- Additional wires;
- Foam rubber for packaging the central unit, as well as tape;
- Good electrical tape and high-quality double-sided tape;
- A set of keys and screwdrivers for dismantling panels and doors;
- A normal knife for stripping wire contacts;
- Soldering iron, solder, rosin - it is better to solder the contacts of the wires.
Review of car alarm StarLine A91
This alarm has a high sales rate and good reviews from users with different backgrounds and different needs.
Starline 91 set
The kit is sold standard, including only a few components:
- Central block StarLine A91.
- Shock sensor.
- Wires to the alarm.
- Light-emitting diode.
- Control key fobs for Starline A91.
Keychain Starline 91
The main keychain has an ergonomic, modern shape. The displayed information is clear and accessible to any user, including the Russian-speaking owner of Starline A91.
For many, support for individual encryption and protection against extreme interference, even in urban environments, will be sufficient reasons to purchase. The increased control range will also be a pleasant surprise, as confirmed by the operating instructions.
Installation of the central unit
Installation of the Starline alarm system begins with the installation of the central unit; it is best to place it under the dashboard - this will save on the length of the connecting wires. It is necessary to choose the driest place so that drops of water do not flow onto it. At the same time, the central unit should not be located next to a heat source - a stove or air conditioner. Below is a list of recommendations for choosing a location for installation:
- It is unacceptable to install the unit near a source of radio wave radiation: radio station, telephone, antenna cables.
- The unit must be in a securely hidden place so that intruders cannot in any way get to it, at least without the need to hack the dashboard.
- There is no need to stop the central unit close to moving parts: cables, rods, and so on.
The block must be secured securely using self-tapping screws, but in extreme cases, high-quality double-sided or regular tape will do.
It is very important that the vibration is minimal, so most car owners first wrap the central unit with foam rubber, then wrap it with tape, and then attach it under the dashboard, often using homemade fasteners - this method is the most reliable.
Setting up autorun
Setting up and enabling automatic engine start via the M31 module on the StarLine A61 signaling occurs via a mobile phone. If you need to start the engine remotely using a bell:
- call the number of the SIM card that is inserted into the module;
- dial the password set by the manufacturer or chosen independently on the phone and wait for the system greeting;
- dial command 21 or 26 - in the first case, after starting the engine, you must stop the call manually, and in the second case, the connection is disconnected automatically.
To stop the car plant, command “20” is sent after the call. In addition to calls, it can be configured and controlled via SMS messages. That is, the required command is not typed during a call, but is sent in a message using a predetermined algorithm. So, to start the engine, the standard type of SMS will be as follows: 21004321. The number “21” is the code - the digits separating the command values, and “4321” is the individual password.
Autostart by time
Using the M31 module, it is possible to start the engine at a predetermined time - using an alarm clock. To do this, use a simple command 0067+3#ttmmd1-d7 , where:
- ttmm — time when the function should be enabled in hours and minutes;
- d1-d7 — days of the week from Monday (1) to Sunday (7).
To turn off the alarm, enter or send in a message the command 0067+3#0000.
Autostart based on temperature
The Starline A61 car alarm boasts a temperature sensor. Therefore, it is allowed to automatically turn on the motor according to its data. In order for the power unit to start warming up, you need to dial or send the command 0067+2#t to the module number, where:
- t is an indicator of the temperature at which activation will occur and which can range from -1 to -30 degrees Celsius.
The option can be disabled with the simple command 0067+2#0.
Autorun by timer
Automatic engine start can be carried out at certain intervals throughout the day. This function is called timer triggering. To activate it, use the telephone command 0067+1#н , where:
- n is the period during which the engine will start, which is from 1 to 24 hours.
Deactivate the option by dialing and sending the command 0067+1#0.
Nuances of operating the Starline A94 car alarm
Installation of the transceiver with antenna
Mounts on the windshield or under the dashboard, but you need to follow strict rules.
- Do not install the transceiver in such a way that the antenna is no closer than 5 cm to metal parts of the car body. Otherwise, the range of the key fob will not be as large as possible due to the interference created.
- The transceiver must be placed at a great distance from the heat source, because it has a built-in sensor for measuring the interior temperature. It is also not recommended to install it in a place exposed to direct sunlight.
The picture is an example of a transceiver installed on the windshield near the center mirror.
Siren and shock sensor
The siren should be placed under the hood away from a source of heat and moisture. The siren horn must be pointed downward, otherwise water may accumulate in it. You also need to make sure that there is no access to the siren from under the car, so that intruders will definitely not get to it.
The sensor must be securely mounted in the vehicle, it is better to rely on the mounting card to be sure that the most suitable place for its installation is used.
Principle of operation
At its core, the Starline system, like any other alarm system, is a device that transmits a message about a car being broken into for the purpose of theft or theft.
A special feature of Starline is the use of cellular communication channels to notify the car owner. The most important part of the system is the GSM module, which is structurally similar to a mobile phone without a screen and keyboard.
The module is equipped with connectors for connecting various sensors, with the help of which the vehicle’s condition is monitored. When you try to open a door, break a window, or otherwise enter the cabin, the sensors are triggered instantly. They send a signal to the base module, which, in turn, redirects this signal to the phones of the car owner and other subscribers connected to the system and to the security console.
Laying wires and connecting all components
Wires must be laid away from the ignition coil, high-voltage wires and other sources of electrical noise. Installation is carried out with the battery disconnected. All wire contacts must be soldered, then wrapped with electrical tape.
In general, that’s all, if you try to describe in more detail the nuances of laying the wires, you will only confuse the car enthusiast, so here we can only give the only correct advice: when installing the wiring, keep the installation card and the wire pinout diagram nearby, otherwise the installation of the car alarm will take a long time and is not a fact. that everything will end successfully.
The photo below is an example of the correct routing of wires inside a car.
This may seem obvious, but it would not hurt to say that when installing the wiring, nothing should stick out anywhere; each wire should be neatly laid under the interior trim.
It takes an average of 8-10 hours to lay wires and connect all components. The specialists at the service center will do this work faster, but will they do it efficiently? To install an alarm system in your car yourself, you will have to work hard, and any car owner who has once gone through this stage will tell you this. In addition to installing the alarm, you will also have to spend time and effort programming it if the factory settings do not work correctly or you do not like. For example, you have a Starline model with auto start, but it doesn’t work as well as you would like.
Auto alarm STARLINE ; Alarm STARLINE; Connection diagram STARLINE; STARLINE instructions
It is advisable to install the sensor next to the cylinder block itself.
Setting the time on the Starline a91 key fob There are clock icons on the alarm remote control. The black wire is the negative power supply; connect it to the car body, ensuring reliable contact. Below are instructions for installing the Starline A alarm system
If you want to turn off silent security, double-click.
It is necessary to check and reduce the indicator. For convenience, the wiring can be wrapped in some places with electrical tape. Set the required warm-up time or set up an auto-start timer. The block is securely secured with self-tapping screws or plastic clamps and additionally wrapped in foam rubber.
Instructions have already been given in the review. According to the instructions, the Valet key allows you to enter the car and start the engine if the alarm key fob is lost.
The horn should be pointing downwards to prevent moisture from getting into it. Recommendations for use and installation The Starline A91 car alarm can be used on any car with a gasoline, diesel or turbo engine, with manual or automatic control. Connect the wires going to the door sensors to the corresponding contacts on the instrument panel. The instructions say that the Starline alarm system has a turbo timer function.
Comments and reviews
Even if the alarms are similar to each other, you cannot use a diagram from another alarm, because they may have different location points, and the safety zones of different cars are different. A short press on button 1 allows you to select the 1st option, a long press - the 4th. However, it is better to give preference to qualified technicians, because many will carry out diagnostics for free and determine the cause of the problem. Closed doors, hood and trunk. The anti-robbery mode will turn on: the doors will be locked; the engine will be blocked, first pulsed and then permanently; sound and light signals will turn on, their duration is not limited; Corresponding icons will appear on the keychain, and it will vibrate and make sounds.
The information on the key fob is not updated constantly, but only when an alarm occurs in the armed mode or by pressing the asterisk button in the disarmed mode. If there is a gasket, the device will not work correctly. It is very important, as it is responsible for programming and settings of the entire system. The consequence of the error is that the car turns off the engine on command from the key fob, when the doors are closed, 4 beeps sound, and then the system does not respond to the autostart function. Engine blocking via CAN Bus - Immobilizer Starline i96 CAN LUX - Review and Installation
