Replacing the cabin filter (for use on Hyundai Accent / Verna models)

Hyundai Accent owners change the cabin filter element based on mileage, but this must be done twice a year - in spring and autumn. This will allow for better filtration of the cabin and avoid many negative consequences for the human body.

Video

The video will tell and show how to change the cabin filter in a car, and will also tell you about some of the subtleties and nuances of the procedure.

Article number and cost of the original cabin filter and its analogues

The Hyundai Accent uses several types of cabin filters, depending on the year of manufacture of the car and its configuration. On early versions of the car, a consumable was used, the article number of which is 971331E000. According to reviews from car owners, it is produced at the TagAZ plant. The price of a filter ranges from 800 to 1500 rubles.

On later versions of the Hyundai Accent, a cabin filter with catalog number 971332H001 is used. It is not interchangeable with the old consumables. The cost of the filter element ranges from 1000 to 1800 rubles.

A completely different cabin filter is installed on vehicles equipped with air conditioning. This air purifier has article numbers 971331E100 and 976171C000. The filter goes on retail sale at prices ranging from 880 to 2100 rubles.

Third-party manufacturers produce cabin filters for Hyundai Accent of all years and in various trim levels. The tables below contain selections of the best analogues that perform excellently on the Hyundai Accent.

Table - Analogs of the original old-style cabin filter

Table - List of analogues of the new branded cabin filter

Table - The best analogs of the original filter for Hyundai Accent with air conditioning

When to change, what interior to install

To perform scheduled maintenance operations, there are regulations, as well as manufacturer recommendations. According to them, replacing the cabin filter of the Hyundai Accent II LC heating and air conditioning system should be done every 15,000 kilometers or once a year.

Considering that the operating conditions of the car in most cases will be far from ideal, experts advise performing this operation approximately twice as often, in spring and autumn.

Characteristic symptoms:

1. Windows often fog up;
2. the appearance of unpleasant odors in the cabin when the airflow is turned on;
3. deterioration of the stove and air conditioner;

They may make you doubt that the filter element is coping with its tasks and an unscheduled replacement will be required. In principle, these symptoms should be relied upon when choosing the correct replacement interval.

Suitable sizes

When choosing a filter element, owners do not always use products recommended by the car manufacturer. Everyone has their own reasons for this, some say that the original is unreasonably expensive. Some people in the region sell only analogues, so there is a need to know the sizes by which you can subsequently make a selection.

2 elements with dimensions:

• Height: 12 mm
• Width: 100 mm
• Length: 248 mm

As a rule, sometimes analogues for the Hyundai Accent II LC may be a few millimeters larger or smaller than the original, there is nothing wrong with that. And if the difference is measured in centimeters, then of course it’s worth looking for another option.

Selecting an original cabin filter

The manufacturer recommends using exclusively original consumables, which, in general, is not surprising. They themselves are of good quality and are widely available in car dealerships, but their price may seem overpriced to many car owners.

Regardless of the configuration, on all second-generation Hyundai Accents (including the restyled version), the manufacturer recommends installing a cabin air filter with article number 97617-1C000 (976171C000). But you can also install the original analogue with number 97617-1C001, the dimensions are the same, the width and height are the same.

The salon in this model is composite and consists of 2 parts. They are completely identical in size, the only difference being the so-called tongue-and-groove system on the side plastic edges.

It is worth noting that sometimes consumables and other spare parts may be supplied to dealerships under different part numbers. Which can sometimes confuse those who want to purchase an original product.

When choosing between a dust and carbon product, car owners are advised to use a carbon filter element. This filter is more expensive, but it cleans the air much better.

It is easy to distinguish - the paper filter accordion is impregnated with a carbon composition, and therefore has a dark gray color. The filter cleans the air flow from dust, fine dirt, germs, bacteria and enhances the protection of your lungs.

Which analogues to choose

In addition to simple cabin filters, there are also carbon filters that filter the air more effectively, but they are more expensive. The advantage of coal SF is that it does not allow foreign odors coming from the road (street) to penetrate into the car interior.

But this filter element also has a drawback - air does not pass through it well. GodWill and Corteco carbon filters are of fairly high quality and are a good replacement for the original.

However, in some retail outlets the price of the original second-generation Hyundai Accent cabin filter may turn out to be greatly inflated. In this case, it makes sense to purchase a non-original consumable item. In particular, cabin filters are considered quite popular:

Conventional dust cabin filters

• Mann Filter CU 2506-2 – high-tech consumables from a well-known manufacturer
• BIG filter GB-9839 – popular brand, good fine cleaning
• Nevsky filter NF-6159-2 - Russian manufacturer with an affordable price

Carbon cabin filters

• Amd FC17C – high-quality and thick carbon coating
• BIG filter GB9839/C – activated carbon
• Nevsky filter NF6159C-2 – normal quality, affordable price

It makes sense to take a closer look at the products of other companies - they also specialize in the production of high-quality consumables for passenger cars:

• Corteco
• Filtron
• SCT
• Sakura
• GoodWill
• Fram
• JS Asakashi
• Champion
• Zekkert
• Masuma
• Nipparts
• Purflux
• Knecht Mahle
• RU54

It is quite possible that sellers may recommend replacing the Accent II LC cabin filter with non-original cheap substitutes with a much smaller thickness. They are not worth buying, since their filtering characteristics are unlikely to be at the proper level.

Replacement frequency

The frequency of replacing the cabin filter directly depends on the operating conditions of the vehicle. On average, installation of a new consumable is required every 10-15 thousand km. There are a number of factors that make it necessary to shorten the interval. These include:

• the route runs along dusty dirt roads;
• the machine is operated in places with abundant flowering plants;
• The path often runs near production with harmful emissions;
• the vehicle often gets stuck in traffic jams or moves in dense city traffic.

Comparison of old and new cabin filters

Step-by-step replacement instructions

Activities to replace consumables do not require any tools - just take a thin screwdriver.

1. To access the SF cover, open the storage compartment.
2. Take out all the things from it, find two plastic seals.
3. To remove them, you need to pry them off with a screwdriver.
4. After all the seals are removed, the compartment will fall down.
5. The cover is easy to find, but access to it is blocked by the air valve rope.
6. If you remove it from the bulge on the cover, you can then remove the cover from the clamps, but a single consumable will not allow you to get free movement of the rope. Therefore, we remove its end from the valve and remove the rope down.

On machines with a double filter, both parts can be removed one at a time without unfastening the valve rope. In any situation, installing a new part is not difficult.

Description of replacing the cabin filter on a Hyundai Accent

Instructions for replacing the cabin filter on a Hyundai Accent are presented below.

• Open the glove compartment.
• Press the latches.

Location of glove box latches

• Remove the glove box clips and fold it down.

Removed clips

• To make it easier to replace the filter, many car owners recommend completely removing the glove compartment. To do this, unscrew a couple of its fasteners.

Mounting location

• Use pliers to disconnect the cable.

Disconnecting the cable

• Remove the filter housing latch.

Latch

• Remove the cabin filter cover.

Cabin filter cover

• Clean the seat.

Seat

• Insert new filter element.

Installed new cabin filter

• Reassemble everything in reverse order.

Replacing the Hyundai Accent clutch: removal, installation, adjustment

This Korean car is equipped with three clutch mechanism options. They are not interchangeable, so it is extremely important to know exactly the modification of the Accent. Hyundai Accent clutch replacement is carried out at a mileage of 90-100 thousand km.

Signs of clutch malfunction and breakdown

There are several main signs of problems with this mechanism on a Hyundai Accent:

• slip;
• jamming;
• switching on jerkily.

All this is accompanied by a characteristic grinding and crackling sound in the clutch area. It becomes extremely difficult to change gears, vibrations appear, and the car's dynamics drop. In some cases, the smell of burnt friction linings is felt.

The wear of the release roller can be determined by the characteristic sound - rustling at idle.

THIS IS INTERESTING: Is it possible to pour water into antifreeze?

A damaged input shaft bearing has a similar symptom.

To accurately identify a malfunction of the clutch release element, you need to start the engine and set the gearshift lever to the neutral position. Then open the hood of the car and attach a pry bar to the connecting plug at one end.

If, after pressing the mechanism towards the engine, the noise disappears, and when released it increases again, this will indicate damage to the release mechanism.

Features of clutch replacement

Replacing the clutch on a Hyundai Accent is a very labor-intensive operation that involves hanging the engine and gearbox. In Moscow and other large cities there are specialized car services ,

where there is a lift, pit and other necessary equipment.

Important features you need to know about.

1. It is necessary to use a special mandrel to center the driven disk, otherwise the box will not fit into place - the usual VAZ mandrel is not suitable here.
2. Removing the starter is somewhat difficult. To gain access to the starter bolts, you need to remove the cable fastenings. The cables themselves can be hooked onto the vacuum brake booster.
3. The release bearing on this car is mounted on a short bell-shaped guide. If the bearing wears out due to heavy load, the Hyundai owner will face repairs at a high price. The guide itself will need to be changed.
4. The clutch on the Accent is installed in the crankcase, connected to the cylinder block and gearbox. The basket is connected to the flywheel using 5 bolts. The latter is equipped with three pins, which, when installing the coupling, enter the structurally provided holes in the casing (basket). Thus, centering occurs.
5. The pressure plate is fixed to the basket by three pairs of elastic steel plates. Replacement of the casing is recommended if there is significant settlement of the diaphragm spring and severe wear of the drive disk and petals to a depth of more than 0.8 mm. However, due to the complex process of removing the transmission on a Hyundai Accent, it is recommended to replace the entire clutch kit, including the discs and release bearing.

The work time depends on the type of mechanism installed on the Hyundai Accent. If this is a regular mechanism, then the repair will take about 1 hour.

Hyundai Accent clutch replacement procedure: step-by-step instructions

The work will require several sizes of wrenches: 12, 14 and 17. You will also need heads, a wrench with an extension, and a dynamometer. As mentioned above, a special type of mandrel will be required.

Removing the clutch

The machine must be installed on an overpass, inspection pit or lift. Further actions:

• drain the gearbox oil;
• remove the battery along with the tray;
• release the air filter housing with the air supply hose to the throttle;
• unscrew the clutch drive from the engine compartment;
• release the gear selection cables from under the car - move the bracket with the cables to the side;
• dismantle the slave cylinder of the clutch mechanism, move it to the side - do not touch the tubes;
• disconnect the wiring from the reverse light switch;
• provide full access to the checkpoint, removing all unnecessary;
• remove both upper gearbox mounts;
• pull out the mudguard;
• Unscrew both outer front wheel drives;
• remove internal grenades;
• remove the left engine support, disconnect the bracket from the gearbox;
• separate the plastic wiring harness holder;
• remove the upper and lower crankcase covers;
• remove the starter;
• suspend the motor or install an adjustable stop under it;
• remove the other two engine mounts along with the brackets;
• separate the gearbox from the power unit by unscrewing the lower fixing bolts - move the box to the left and place it on the stop;
• unscrew the bolts connecting the casing to the flywheel;
• pull out the basket with the disc.

The release bearing is located on the clutch fork. To remove it, you need to remove the boot and rotate the fork - be sure to press with your hand on the sides of its internal spring. Then remove the element along with the rubber gasket.

Installation

Before reinstallation, the basket must be centered relative to the disk and shaft bearing. The mandrel is removed at the very last moment, after all the casing bolts are tightened to the final torque.

Important Tips:

• before installing the gearbox, apply a thin layer of tripoid grease to the splined part of the basket and input shaft;
• the new disk must be placed with the convex part towards the basket;
• the basket bolts are finally tightened with a dynamic wrench with a torque of 22 Newton per meter;
• New fluid must be filled into the gearbox.

Flywheel check

If there are blue spots on the flywheel, this is a reason to measure the runout. You need to make sure that the working surface of the part (mirror) is not damaged. To correctly carry out a measurement, you need a homemade dial indicator on a tripod or other device. It is attached to the flywheel, then the engine is rotated clockwise. At the same time the scale is controlled. The permissible runout is no more than 0.1 mm.

Useful recommendations for spare parts

Here are the clutch parts that fit the Hyundai Accent in terms of diameter and part numbers:

• on models up to 2005 - disc 200 mm 41100-22705, basket 200 mm 41300-22660, release 41424-28000;
• on models after 2005 - disc 215 mm 41100-22750, basket 215 mm 41300-22710 and release lever 41424-28000.

When replacing the clutch on a Hyundai Accent, you need to be extremely careful. When friction linings wear, asbestos dust is formed, which is very dangerous for car mechanisms. It is prohibited to wash it off with gasoline or solvent! Only industrial alcohol should be used.

THIS IS INTERESTING: When should you polish your car?

Source: https://ddcar.ru/blog/remont/zamena-scepleniya-henday-akcent

Making your own filter

The original cabin filter is expensive, and its analogues do not always provide sufficient air purification.

Therefore, in order to save money, some car owners make their own consumables. To do this, you must follow the instructions below.

• Take an old cabin filter from a Hyundai Accent.
• Using a utility knife, cut out the used work area.

Getting a frame

• Make a new work area from a kitchen hood filter element.
• Glue the frame and filter area together.

Self-made filter

Filter selection

The choice of a cabin filter should be taken quite seriously, since this will determine how high-quality the air filtration in the cabin will be, as well as the direct impact on the human body.

Cabin filter.

971333SAA0 is the original catalog number of the Hyundai Accent cabin filter. The cost of the element is 1500 rubles.

In addition to the original part, there are quite a large number of analogues: