Keychain Starline B9: complete instructions for setting up and binding


Advanced security system with key fob Starline B9 (English article Starline B9 Twage) not only protects the car from theft, but also has a large number of additional functions. So, the owner of this car alarm can set:
  • silent security mode;
  • activate the “anti-robbery” or “panic” command;
  • install a turbo timer;
  • set up automatic engine start based on temperature, alarm clock, timer, etc.

The set includes a complete set for installing the system, a main key fob with an LCD display, as well as a second remote control in case the main one is lost (without display). Additionally, you can install a GSM module, which makes it possible to control many functions from your phone. Programming and linking the key fob is a relatively easy procedure. You can learn about these capabilities, as well as the system setup procedure, from this article. About the Starline B9 alarm unit.

Buttons and symbols

The Starline B9 Twage (W807) or Starline B9 Dialog (W809) alarm kit includes two key fobs. The main one has a liquid crystal screen with color and sound indication. There are also many icons on the display to help you understand the capabilities of the system and understand which functions are currently enabled (active icons will be highlighted).

The second remote control is designed in case of loss of the main key fob or its complete discharge. It is not equipped with a screen, but there is an LED lamp on the body for indication. The number of buttons is three, just like on the main remote control. The decoding of symbols and the main functions of the keys are presented below.

  1. Button 1, as a rule, is responsible for activating the main options - those that have already been programmed.
  2. Button 2 usually acts as a deactivator of these tasks.
  3. Key 3 helps set additional modes, activate the search option or view the current engine temperature.

Depending on the combinations of presses, as well as their duration, a large number of tasks can be performed. The main key fob has a ton of different indications to help you navigate through the alarm's capabilities.

A clock icon with the caption Clock Start or Fixed Start – auto-start mode using an alarm clock or timer.

Thermometer – autostart based on temperature.

Wrench with Valet inscription - service mode.
Extra Run – turbo timer option.
Auto ARM - autonomous arming.

Auto Immo – immobilizer.

Key Lock – locks the key fob buttons from accidental pressing.

Alarm management

A complete B9 alarm manual in Russian comes with the system and describes in detail all possible manipulations. All main options are activated by pressing buttons or a combination of them.

Starting and disabling the security mode

The security option is activated in a car with the engine turned off, the doors, hood and trunk tightly closed, and the hand brake raised. To activate protection, click on the first button. The system will notify you of the completed action with a signal, and a closed lock icon will appear on the control panel. Deactivation is performed by the second key, a sound signal and an icon will confirm the deactivation of the function.

Starting security mode without sound

This function is launched under the same conditions as protection activation. The difference is that you will need to press the buttons twice: to turn on silent mode - button No. 1, to turn off - button No. 2.

Opening and closing doors with the engine running

The option is activated by the following procedure:

  • the engine starts, the car is put on the handbrake, one of the doors opens;
  • button No. 2 is pressed until the siren signal appears and the smoke pipe icon appears, the engine operation timer appears;
  • the key is removed from the ignition, the driver gets out of the car and closes the doors;
  • security is activated and deactivated in the standard way.

Remote engine start and stop

Remote engine start is performed by sequentially pressing buttons 1 and 3. In this case, 1 button must be held down a little longer than 3. Activation of the motor will be confirmed by a sound and light signal. To turn off the engine from a distance, you need to click on keys 2 and 3 in the same way.

Warming up the engine at a given temperature

During the cold season, you can set the engine to warm up on a schedule. The option is activated by switching the cursor on the key fob screen to the thermometer icon, where the automatic engine start temperature is set. The function is activated after clicking on the second key.

Automatic engine start according to schedule

Autorun has a number of additional settings, which determine the adequacy of the option’s operation. First, set the current time and alarm clock. If the alarm clock rings at exactly the set time, the cursor is hovered over the bell on the pager display, and buttons 1 and 3 are pressed simultaneously. To turn off, hover the cursor over the clock icon and click button 2.

Activating the vehicle search function

It is recommended to register the GPS search function for the B 9 model immediately after installing the alarm. The option is launched after double-clicking the 3rd key within a second. If successful, the siren and headlights will sound six times.

Triggering of alarm sensors

Alarm sensors are activated when there is an impact or external impact on the vehicle. Startup occurs automatically, and shutdown by pressing key No. 2.

VALET mode

The service mode is started by holding down key No. 3 until the siren sounds. Using the same button, the pointer moves to the Valet inscription, then click on 1 button.

Programming Starline B9 key fob

To program custom parameters convenient for the car owner, the driver must enter the appropriate mode. To do this, you will need the Valet service button. If the car alarm is new, then the driver should know where it is installed. If the car was bought secondhand, then you need to inquire about its location. As a rule, installers place it in hidden places so that an attacker cannot reach it and reset the settings.

  • under the decorative cover of the front panel, near the fuse box;
  • on the inside of the storage compartments on the front doors or inside the glove box;
  • near the pedal assembly or around the steering column from below;
  • on the central tunnel between the front seats;

To switch to this mode, you must turn off the ignition and press the Valet service button 6 times. After turning the key to On mode, six beeps will sound and the car will blink its headlights six times. Now you need to press the Valet button a second time. The number of presses will indicate the number of the function that needs to be reprogrammed. For example, three presses allow you to configure autorun by timer, and three – by temperature. After this, by pressing the button on the key fob, the corresponding parameters are set.

Starline A9 alarm connection diagram

Below is a help video on how to enter the mode and configure or reprogram custom functions.

How to register an alarm key fob

To correctly configure and control all additional functions, registration of the remote control is required. This is how the system will “understand” that the signal is sent by the owner and not by the attacker. It is best to record several remote controls at once - both standard, with an LCD display, and additional. If the procedure was unsuccessful or the already linked key fobs cannot interact with the system, then it is necessary to flash the alarm. If even the firmware did not help, and all the glitches remain, you need to give the car to specialists for diagnostics. Below are instructions on exactly how to register a key fob.

How to attach an alarm key fob to a car

The Starline B9 system has two versions: Dialog and Twage. Depending on the option, the connection has its own characteristics. Binding the key fob The dialogue is carried out as follows:

  • the ignition key is turned to the Off position;
  • The Valet service button is pressed seven times. After turning on the ignition, the car emits seven sound and light signals;
  • The second and third buttons on the remote control are pressed simultaneously. They are held until a melodic signal sounds, indicating that the binding was successful.
  • The spare remote control is registered in the same way. The main requirement is that the interval between bindings should not be more than five seconds;
  • the ignition turns off again. The successful completion of the procedure will be indicated by the dimensions of the car blinking five times.

To connect the key fobs of the Starline B9 Tweig system, you need to complete the following steps:

  • With the ignition off, press the Valet button seven times;
  • turn on the ignition, listen to seven signals;
  • press the first and second buttons simultaneously until the sound signal sounds. Attach all existing keychains;
  • exit the binding mode by turning off the ignition.

How to set the time on a key fob

There is a clock on the Starline B9 alarm remote control. It is very important to set this parameter correctly, otherwise many functions will not work correctly. For example, autostart on an alarm clock will occur at the wrong time. To set the clock you need:

  1. Press and hold the third button for a few seconds, until it emits a melodic signal. Afterwards, another sound should sound, and two melodies should also be played. Now the owner has entered the time settings mode, and the clock indicator blinks on the display.
  2. Using the first and second parameter buttons, the “Clock” is changed. In the first case, it increases, in the second, it decreases. After setting the correct parameter, you must press the third button again. The “Minute” indicator now starts flashing. Its adjustment is carried out in the same way, by pressing keys one and two.
  3. The next click on the third button switches to the alarm setting mode. The procedure for programming it is exactly the same - the first button is responsible for increasing the parameter, the second - for decreasing it.
  4. Pressing key three again allows you to activate or deactivate the alarm. In this case, the first button turns it on, and the second button deactivates it.
  5. Another click of the third button allows you to go to the alarm timer setting menu. Parameters are reduced or increased in the same way.
  6. It’s very easy to finish setting the clock on the Starline remote control - just don’t press anything for 5 seconds. The system will remember and save the changes made.

How to set up auto start on alarms

The system also has additional options that allow you to start the car automatically at a specified time or upon reaching a specific temperature value. Setting up automatic start based on temperature is as follows:

  • turn the ignition key to the OFF position, press the Valet service key 6 times;
  • turn on the ignition, listen to 6 sound and light signals from the car, confirming entry into the programming mode;
  • press the Valet button four more times;
  • Now on the key fob we press the buttons corresponding to the required value (1st key = -5 degrees, 2nd = -10 degrees, 3rd = -18 degrees, long press of the first button = -25 degrees);
  • confirmation of the received command is the corresponding number of sound or light signals (from 1 to 4). Memorizing this function will be automatic; you just need to not press anything for five seconds.

Temperature-based autostart can also be activated from the key fob - you need to use buttons 3 and 1 to move the cursor to the thermometer icon and activate this option. As confirmation, one beep from the key fob will sound and the headlights will flash several times.

If you need to start the car at a certain time in order to get into an already warmed-up car, then it is better to use an alarm start.

You need to position the cursor on the corresponding clock icon (using the third button). Then you need to press the first button and hear a melodic signal. The time on the key fob should blink, and the car's dimensions should blink once;

Instructions for autostarting the Starline B9 key fob

Now the corresponding icon is displayed on the remote control, and the system has begun the countdown to autostart. The alarm clock indicators themselves are set in the same place as the clock parameter.

After this, autostart by alarm can be activated from the key fob:

  • You need to successively press keys 3 and 1 to move the cursor to the clock icon. Afterwards, a melodic signal from the remote control will sound;
  • To turn off this mode, you now need to press the second key.

How to turn off the engine

If the car has warmed up, but the trip is cancelled, then it can be easily turned off remotely. To do this, you only need to press the second button for a long time, and then again briefly press the third key. The motor will turn off, and the key fob will emit a melodic signal.

How to open the trunk with the key fob

Optionally, the system can be equipped with a remote lock for the luggage compartment. An additional channel is responsible for this, which is programmed according to function 13. The function is activated as follows: on the key fob, press the third button for a long time, and then press the first key again briefly. The car emits three sound and light signals, and the trunk door opens.

Factory reset

If the car was purchased secondhand or the system periodically fails, then it makes sense to reset the Starline B9 settings to factory settings. To do this you will need:

  • turn off the ignition, press the Valet service button nine times;
  • turn on the ignition, listen to nine sound and light signals;
  • press the service button again, listen to another signal;
  • click on the first key on the remote control to confirm the factory reset;
  • turn the ignition off and on again. Confirmation of a successful procedure will be five light signals from the car.

Functionality of key fobs

Main features and functions of the remote control of the Starline A91 Twage and Dialog key fob with auto start:

  1. Activation and deactivation of protective mode.
  2. Forced activation of alarm signals by a command from the communicator.
  3. Transferring information about an alarm from a microprocessor device to a pager equipped with a screen and capable of two-way communication.
  4. Anti-robbery option. If configured correctly, the car owner will be protected from car theft in the event of a violent seizure or robbery. The option is intelligent and is developed by Starline. When a car is forcibly seized, the anti-theft complex analyzes data coming from the sensors of the parking lever, brake pedal and ignition system. When the attacker leaves the crime scene with the car at a safe distance from the owner (usually after 40-60 seconds), the engine is blocked. This happens when the car speed decreases to 30 km/h. When braking, the system will warn other road users about the maneuver using lights.
  5. The communicator display shows an indication of the complex and activated security zones. There are nine in total.
  6. The system status is indicated by a diode lamp located on the screen.
  7. If, when the protective mode is turned on, one of the zones does not work, information about the problem is displayed on the device screen with a specific indication of the zone.
  8. Using the communicator, the car owner can turn on silent protection. When zones are triggered, the alarm will not sound; information about the problem will be sent to the communicator in the form of signals or vibration.
  9. Enabling the protective function on a machine with the power unit running. Before programming this function on a car, we recommend that you carefully study the service manual for operation and control.
  10. When the driver turns on the security system, the system performs automatic diagnostics of the main devices. This allows you to detect problem areas in a timely manner.
  11. Using the remote control, the driver can remotely deactivate the sensitivity controller by level.
  12. The Starline B9 car alarm communicator can be registered to control the standard central locking system.
  13. The remote control allows you to configure the comfort option. If adjusted correctly, activation of the protective mode will be accompanied by the closing of the electric sunroof and power windows, if they are installed in the car.
  14. Packet data between the communicator and the microprocessor device can be transmitted over four additional channels. They can be configured to implement auxiliary options.
  15. Using the remote control, you can enable the option to search for a car in the parking lot. When you press a certain combination of communicator buttons, the car's lights will blink, showing the car owner where it is located.
  16. Pager key lock. Will prevent accidental pressing of buttons in the pocket of the car owner.
  17. Thanks to feedback and the installation of sensors, the driver can use the data on the device display to learn about the temperature in the cabin and engine compartment.
  18. The pager is characterized by using an energy-saving mode. This helps prevent the battery from draining quickly. Only the main communicator has this mode.
  19. The ability to remotely record new communicators on the B9 Dialog alarm system, as well as delete old devices from the device’s memory.
  20. Option to quickly remove customized options to default values.
  21. Automatic start of the internal combustion engine upon a command sent by the owner.
  22. Current time. Correct setting of this parameter will ensure timely remote start of the internal combustion engine based on time and alarm clock.

How to disarm without a key fob

If the remote control is lost, an emergency shutdown of the alarm is provided.
The car owner must open the car door using the key. Next, within 20 seconds, turn on the ignition and press the service button three times. Turn off the ignition again - if everything went well, the car will beep twice. If the emergency shutdown mode is selected by entering a personal code, the action algorithm is different:

  • the door opens with a key;
  • within 20 seconds, the ignition is turned on, and the service button is pressed a number of times equal to the first digit of the code;
  • the ignition turns off. If the code is two-digit, then the procedure is repeated, only the Valet button must be pressed a different number of times (equal to the second digit of the code). If the code is three-digit, then the third stage follows.

How to turn off the alarm from the key fob

Also, if you have a working key fob, you can turn off the alarm using it. Disabling is simple - by pressing the second key. The car will make two sounds. You can disarm it without sound confirmation - this option will be activated if you make two consecutive short presses of the second button. There is also a silent security mode to protect the car without a siren or light indication. First, two presses of the second key are made on the key fob - one long, and the second short. After this, the car will not emit signals, and the owner’s key fob will only receive notifications.

5. How to enable/disable different modes using the cursor

The cursor method of activating and deactivating modes is very easy to understand. The icon for the function you want to set flashes on the screen. The blinking icon is the cursor. You only need to install it on the desired icon. To do this you need:

  1. Press button 3 until 1 long and 1 short beep sounds.
  2. Continue pressing key 3 (press briefly) until the flashing cursor moves to the desired icon.

After you have placed the cursor on the desired shortcut, you can turn the selected mode on or off: key 1 – ON (the mode icon appears on the screen), key 2 – OFF (the mode icon disappears on the screen).

Compatibility of Starline B9 key fobs

There are several different variations of the Starline B9 alarm system - these are Dialog and Tweig. The difference between car alarms is minimal , as is the range of functions performed. Almost everything here is identical - the only differences are in the appearance of the keychains .

The body of the B9 Dialog remote control has a rough structure, while the Twage has a smooth structure. The buttons have different icons, although they perform identical functions. There are also differences in the LCD graphics, vehicle designation and icons. However, these remote controls are interchangeable and are perfect for both versions of the Starline B9 car alarm.

Starline B9 – proven protection for your car

Having studied the reviews of the owners, we can conclude that the B9 is one of the most successful Starline models, which is very popular among the people. This system owes its fame to its advanced protective functions at the time of release, as well as its ease of everyday use and ease of installation.

A huge plus of StarlineB9 is the presence of automatic engine start. This function, although not a security one, is considered practically mandatory for modern systems, as it provides comfort and saves time on warming up. Today it cannot be said that this system provides the most reliable protection, but it can still successfully protect the car, notifying the owner of a possible break-in using feedback from the key fob.

Installation and operation instructions for StarLine B9 alarm key fob

To correctly install the security system, you will need the following set of “helpers”:

  • a set of tools, including spanners, as well as removable heads of various sizes;
  • set for soldering wires: blowtorch, solder kit (tin, rosin);
  • drill, heat shrink tubing, insulating tape;

There are also basic points that need to be taken into account in order to properly install the alarm:

  • the central unit is placed in a place inaccessible to moisture and prying eyes, and the wires are laid in such a way that an attacker cannot reach them from the outside;
  • the transceiver is mounted away from metal parts (at least 5 cm). The wires are also laid at a distance from parts that create interference (armored wires, etc.) for correct signal transmission;
  • the siren is mounted away from high temperatures, and the engine temperature sensor is fixed to its body using M6 bolts (pictured).

Common key fob malfunctions and their solutions

Problems that the consumer will encounter:

  1. Power supply discharge. If this happens, you need to buy a new battery and install it in the device. When replacing, consider the battery standard.
  2. Negative effects of moisture and dust on the device. If the key fob “sinks” or becomes clogged (often occurs during prolonged use), its body must be disassembled and cleaned of dirt. And then dry it from moisture. The device should not be dried in close proximity to sources of high temperatures, as exposure to them will lead to failure of the board. If there is dirt inside the case, it can be removed with a soft brush.
  3. Mechanical damage. If the case or screen is cracked, these components must be replaced.
  4. Software faults. This can be solved by reflashing the device. It is better to entrust this procedure to professionals.

What to do if StarLine B9 does not work

Sometimes the owner experiences problems with the alarm and needs to understand the existing problem. For example, the car does not see the feedback key fob or does not respond to the command. Accordingly, the owner cannot open the car, start the car or select the required security mode. In this case, you need to check the condition of the remote control power supply and replace the battery if necessary.

Moreover, if the car does not receive the remote control well, then the reason for this may be a poor signal from the transceiver located near metal parts that create interference. It needs to be moved to a more protected place.

There are also options when the car alarm constantly notifies the owner about hacking attempts, the key fob regularly vibrates, and the SP error is written on the display. The reason for this behavior is that the shock sensor is too sensitive. Both stages (impact and hacking) can be adjusted using a standard screwdriver, reaching the sensor itself (it has special controls).

If false alarms sometimes occur and additional software glitches appear, then it is best to reset to factory settings. After this, most of the problems should disappear, but if you can’t fix them, it’s better to take the car to a specialized service center, where qualified specialists will sort out the issue and fix all the problems.

Keychain Starline B94

Owner reviews

Positive and negative opinions of drivers who used the B9 were taken from the sites https://mobilradio.ru/, www.autoelectric.ru, www.autoradioservice.ru

PositiveNegative
A very decent alarm for the money. I took the twage version. Good range, even through metal walls, for example, if it is in a garage. Feedback is also a cool thing, you always know if something is wrong with the car. As a fisherman who often leaves his car in a deserted place, this is very convenient for me. I would never buy it a second time! I only ruined my nerves with this alarm. It glitches all the time. Autostart does not turn on, or turns on when she wants. The key fob doesn't work properly. Once I got stuck at a car wash and couldn’t get into the car, the second time at the dacha. I had to unplug the unit to turn it off. I don’t recommend this product to anyone, it’s better not to mess with it!
The Sinhalese turned out to be very tenacious. It has been on an SUV for more than 5 years. It fell into both water and mud. The keychain fell several times from a decent height. And nothing, it works. A reliable system, albeit a simple one. Despite the presence of a hologram, the alarm resembles a Chinese counterfeit. The diagram is kind of clumsy, it’s unclear why everything should be connected like that when everything can be done much simpler. The keychain is very flimsy, the case cracked after a slight fall.
I don’t know why some people write negative reviews, the starline b9 worked great for me for about 4 years. Always opens and closes clearly the first time. It doesn’t work in vain, well, maybe it happened a couple of times. I believe that professionals should install such systems, and those who do it themselves create unnecessary problems for themselves. I installed it at the station, and everything works without problems! I had one like this a couple of years ago. It doesn't work well, it's constantly buggy. It often works, and for some reason at night. I used this alarm for 3 days and returned it back. It’s good that at least the service department agreed to dismantle it.
Simple, reliable and inexpensive alarm system. It has everything you need, and if someone wants to steal a specific car, they will do it anyway, with any security. I am especially pleased with the engine warming up; for our climate this is simply a godsend! I did the repair only once, and even then it was minor - I re-soldered the contacts on the antenna unit. I have it on the Volga. I installed it a long time ago. Overall, it’s not a bad model, but it’s already outdated; there’s no point in installing it on new cars. Firstly, the theft protection is weak, and secondly, it cannot be connected via a digital bus.
I chose the B6 Starline because it has a turbo timer and has auto start. I’ve been using it for 3 years, no serious problems have arisen, with the exception of replacing the key fob, since the buttons on it began to stick over time. I bought it for a Ten for myself and a Toyota for my wife. Cars in our yard began to be robbed frequently, so we decided to install alarms. What can I say about this model? If we get lucky. It started to glitch for me literally after a month or two. It works fine for my wife, sometimes she says it doesn’t work the first time. Installed by the same person, a proven master.

Related link:

Alarm A39 - a unique offer from Starline

How to replace the display on a key fob

Sometimes the Starline alarm remote control receives mechanical damage, due to which the display may crack and a certain number of symbols will simply no longer be displayed. This is extremely inconvenient, especially since this problem can be corrected by replacing it. To do this, you will need a new screen, a screwdriver and a set of soldering accessories (blowtorch, rosin, tin). First you need to disassemble the key fob and unsolder the old display, disconnecting it from the cable. Next, you may need to bend the contacts so that they do not rest against the board itself. Now you need to tin all the contacts on the key fob for better impulse transmission and solder the display to the cable. After assembly, the remote control should work properly.

Connection diagram for Starline B9. How to install an alarm yourself


The security system is connected according to the diagrams presented in the alarm instructions. For experienced car enthusiasts, the connection diagram for the Starline b9 car alarm is quite simple. For those who have never encountered the installation of such equipment, the manufacturer recommends turning to professionals.

Price

The cost of the Starline B9 keychain may vary depending on whether it is an original or a Chinese spare part. Below is a table with approximate prices for two versions of the remote control in various cities of Russia.

CityCost, original (rubles)Price, Chinese equivalent (rubles)
Moscow1800999
Saint Petersburg2000700
Volgograd19001000
Ekaterinburg21001050
Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]