Description of car alarm Starline A63 instructions for installation, configuration and operation

02/26/2022 2,328 Alarms

Author: Victor

The Starline A63 car alarm works with non-scannable dialogue encoding, which eliminates the possibility of hacking. The system provides a notification function for the car owner, as well as an optional automatic engine start.

[Hide]

Features of the Starline A63 car alarm

The basis of this model of the security complex is the fourth generation platform. Unlike previous versions, the Starline A63 system is characterized by the use of light signals and new power relays. They are used to control the central locking system. Alarm developers have introduced options designed to provide better protection and comfortable control. New opportunities in terms of condition control and monitoring of vehicle location are provided thanks to the presence of GPS and GSM modules.

Specifications

Properties that the Starline A63 budget system has:

  • information is sent via a radio channel, the operating frequency of which is 433-434 MHz;
  • the largest operating range of the main communicator in command transmission mode is 800 meters;
  • if the key fob operates in signal receiving mode, then its range will be up to 2 km;
  • the operating range of the spare pager will be no more than 15 meters;
  • The sensitivity and tilt controller belongs to the category of integral three-axis sensors;
  • operating temperature range is from -50 to +85 degrees;
  • to power the security system, 9 to 18 volts are required;
  • in protection mode, the current consumed by the system will be no more than 17 mA;
  • if the security complex is supplemented with a GSM module, then the current consumption will increase to 25 mA.

The range of the Starline A63 alarm key fob depends on the presence of interference in the area, as well as weather conditions.

Degree of protection

To ensure maximum security, this system model uses conversational encoding with 128-bit AES encryption. This indicates the impossibility of hacking a security complex using code grabbers. Increased resistance to burglary is ensured thanks to the possibility of installing an additional Starline P3 blocking relay. This device does not have a physical connection with the microprocessor module; therefore, it is impossible to determine its presence by wires from the control unit. Even if the ECU is physically disconnected, the relay will remain operational.

The ExpressShina channel talked about the degree of protection and technical characteristics of the A63 anti-theft system.

Advantages and disadvantages

The advantages of this security system:

  1. The presence of a security code Dialogue allows you to prevent interception of signals.
  2. The versatility of the device. This system supports more than 300 different cars including the latest models.
  3. The alarm system is equipped with a CAN+LIN digital interface, which significantly simplifies and speeds up the installation process. During installation, the car owner will not have to seriously interfere with the vehicle’s electronics.
  4. Availability of flexible service management channels. With their help, the consumer can configure additional functions without using external devices.
  5. Reducing the number of false positives. During development, the manufacturer implemented technologies that made it possible to obtain a product that practically does not work without a reason.

According to reviews, malfunctions in the alarm system usually occur as a result of incorrect installation. There may be a problem with the low range of the key fob, but this is caused by external factors.

Malfunctions specific to A63

Despite the stability and reliability of the system, the A63 alarm sometimes malfunctions. This most often happens if the system was installed by yourself, but a factory defect is also possible.

We will consider the most common breakdowns and methods for dealing with them below:

Related link:

Car alarm APS 1550.

1. The alarm does not respond to key fob commands. Possible causes of failure:

  • Problems with the remote control software.

Solving the problem: if the remote control transmitter malfunctions, removing the batteries and reinstalling them will help temporarily solve the problem. In this case, it is recommended to visit a service center and replace the key fob, as the problem may soon recur. You need to take a spare key fob with you so that the technician can set up the alarm for both remote controls at once. You can do this yourself, using the Starline A63 operating instructions.

2. The shock or tilt sensor is triggered. Possible causes of failure:

  • unreliable fastening of the unit with sensors;
  • the required sensor level is not set;
  • manufacturing defects.

Solution to the problem: since in the A63 and A63 Eco models the sensors are built directly into the central unit, it is very important to securely fasten it. Each device is configured using the remote control buttons. A description of the process can be found in the security system operating instructions.

Functional features of the model

All functionality of the security complex can be divided into several categories:

  • anti-theft options;
  • service functions;
  • comfort options.

Anti-theft functions

Description of anti-theft options of the Starline A63 Dialog system:

  • protection mode with sound and light alarms;
  • transmission of alert signals about the activation of an alarm to a remote control equipped with a display;
  • silent activation and deactivation of protective mode;
  • silent security function (when the alarm is turned on, the siren does not work, alerts are sent to the control panel);
  • the ability to activate the protective mode when the engine is running;
  • option to turn security on and off without using a remote control;
  • presence of engine blocker mode;
  • anti-robbery function, which allows you to block the internal combustion engine in the event of a forcible seizure of the car;
  • option to automatically return to protective mode if it is accidentally turned off;
  • the “Panic” function will allow you to temporarily activate the alarm mode upon command;
  • customizable personal password for emergency shutdown of protection;
  • the ability to block the power unit and preserve it when dismantling the anti-theft system;
  • customizable two-stage immo shutdown.

Auto electrician Sergei Zaitsev spoke about the functionality of the Starline A63 car alarm.

Service functions

Overview of service options:

  • bypassing door zones and delaying the activation of controllers until the interior lighting is turned off;
  • ability to select the volume of confirmation signals when activating and deactivating protection;
  • option to remotely disable the sensitivity and tilt controller by level when security is activated;
  • remote control of standard central locking;
  • possibility of two-stage opening of door locks;
  • the presence of eight channels for controlling additional devices and equipment;
  • two-stage door locking;
  • the ability to control the voltage level of the vehicle battery;
  • option to control the central locking from the ignition switch;
  • separate indication of engine and passenger compartment temperature levels;
  • availability of the option to call the car owner from the car;
  • light alarm for unlocked doors;
  • presence of a turbo timer mode;
  • remote configuration of options and remote controls;
  • emergency control mode;
  • the ability to control the vehicle interior lighting system;
  • the communicator is equipped with special protection against accidental key presses;
  • the ability to link new remote controls and delete information about old devices from the memory of the microprocessor module;
  • the communicator display displays information about the current time, a timer and an alarm clock are also displayed;
  • presence of a low battery indicator in the key fob;
  • possibility of additional installation of external modules.

Comfort functions

Separately, we should highlight the comfort options of the autostart system:

  • control function of the pre-start heating device, thanks to it, the procedure for starting the power unit in the cold season is simplified;
  • automatic adjustment of the position of electric mirrors and seats in the car;
  • light path function when the security mode is turned on in the car;
  • the ability to control the security complex using a mobile device;
  • The presence of a wireless blocking relay will allow you to install a security system in any hard-to-reach place.

The channel “AutoAudioCenter” spoke about the main options of the system of this model.

For this product we recommend installing

StarLine 2CAN+2LIN-Master

The universal module StarLine 2CAN+2LIN Master is designed for installing car alarms with flexible architecture on cars equipped with CAN buses and LIN buses.

Dynamic siren

Single tone dynamic siren. A component of a security complex necessary to provide sound notification.

StarLine Power module

The starting kit is designed for connection to the StarLine A63 and StarLine A36 and StarLine S66 security and telematics systems that support the function of automatic and remote engine starting.

StarLine GSM master

The GSM module is designed for use in StarLine models: E60, E90, A64, A94, B64, B94, A63, A93, A93 CAN+LIN, A93 2CAN+LIN, A36, A39, E61, E91, E93, E63, E95 2CAN, E95 CAN+LIN, E65 CAN+LIN, E95 BT 2CAN+LIN, E65 BT 2CAN+LIN, A94 CAN+LIN, B94 CAN+LIN, T94. Allows you to manage security functions and receive notifications about security status on your mobile phone without distance limitation throughout the coverage area of ​​GSM networks.

Equipment StarLine A63

The Starline A63 alarm system must be equipped with the following parts and elements:

  • service manual for use;
  • warranty card;
  • consumer reminder;
  • main alarm control panel equipped with a display;
  • battery for installation in the main communicator;
  • spare pager without screen;
  • additional relay with connection block;
  • microprocessor module of the system;
  • a set of wires and adapters with which the consumer will install the security system;
  • LED status indicator light;
  • antenna module;
  • limit switch for installation on the hood with diodes, two screws, and a connector for grounding.

Main alarm unit

The main microprocessor module is designed to control the security complex. It is made in the form of a small block in a plastic case. This device is the “brain” of a car alarm.

Autostart control keychain

The package includes two communicators - the main one and the additional one. The main difference between them is the range as well as functionality.

Main keychain

The main communicator comes in a shockproof case. The presence of a display on it provides the possibility of two-way communication. Using the screen, the procedure for setting options will be simpler. In addition, some functions can only be configured using the main key fob. The device is equipped with four buttons.

Using the remote control you can configure the following functions:

  • current time;
  • activation and deactivation of the alarm;
  • alarm time;
  • activation and deactivation of the timer;
  • setting the timer time;
  • adjusting the alarm volume parameter;
  • activating and disabling silent mode;
  • selecting the type of sound signal.

Additional keychain

The spare alarm communicator Starline A63 is not equipped with a display, so visual monitoring of the vehicle’s condition is impossible.

However, the device has feedback. The car owner is warned using sound signals. The device is equipped with three buttons that control the security complex.

User Sergey Kuchynsky spoke in detail about the configuration of the A63 system.

Alarm versions Starline A93/A63 depending on configuration

Since we have already found out that there are no differences between A93/A63 and A39/A36, then everything stated below will be the same for all these systems (unless otherwise stated).


Alarm equipment Starline a93/63 depending on the name

2.1. Alarm delivery set

Initially, the A63 package includes:

  • main key fob with LCD display and simple key fob;
  • the alarm module itself;
  • antenna with built-in shock and tilt sensors;
  • relay with socket;
  • Light-emitting diode;
  • service button;
  • set of wires;
  • installation materials – ties, ground crimp, end switch, 2 screws, 4 diodes, female crimp.


Equipment Starline A63

The A93 package includes everything that is in the A63 and:

  • engine starting module;
  • engine temperature sensor;
  • siren;
  • cable for connecting the launch module and temperature sensor to the alarm unit.


Starline A93 equipment
Depending on the scope of delivery, Starline a93/a63 may be called:

  • eco;
  • 2Can 2Lin, 2Can Lin, Can Lin, 2Can;
  • GSM;
  • Various combinations are possible, for example, Starline A93 2Can2Lin Eco GSM or Starline A63 Eco.

Also, any complex can be added with a GPS module.

Now about these designations in more detail.

2.2. ECO

Starline A93/A63 Eco comes with only one key fob - with feedback. There is no key fob without an LCD display.


Starline A93 Eco

2.3. 2Can 2Lin, 2Can Lin, Can Lin, 2Can

If any of these blocks are installed in the alarm module, then its name is added to the system name. For example, Starline a93 2Can 2Lin.


Starline A93 Can Lin

The presence of these modules allows you to significantly reduce the installation time of the alarm system, simplify its connection to the vehicle circuits, and also bypass the standard immobilizer on some cars without the use of additional costs (manufacturing an additional chip, connecting an analog crawler).


2Can 2Lin module with cable for connecting the unit to the car’s can bus

2.4. GSM

When a GSM module is installed in the alarm unit, the system is called Starline A93/A63 GSM.


Starline A93 GSM

With the GSM module installed, it is possible to control the car through the Starline application installed on the car owner’s phone. You can also change various settings through it, such as engine start temperature and others.


GSM module

With the ZhSM module you can always see what is happening with your car. If any security zone is triggered, the system will alert you with a call.

2.5. GPS

Initially, the Starline A93 does not come with a GPS antenna in any delivery option. But you can always complete the system with this accessory.


GPS antenna

Please note that the GPS antenna only works if there is a GSM module.

The GPS antenna gives you the ability to see the location of your vehicle with an accuracy of up to a meter.

Thus, the most powerful alarm name will look like this Starline A93 2Can 2Lin GSM GPS.

Characteristics of car alarm StarLine A63 ECO

Characteristics of this model:

  • the type of communication is classified as two-way;
  • dialogue encoding is used to encrypt signals;
  • optionally it is possible to connect a CAN interface, as well as a GSM module;
  • it is possible to implement the option of remote engine start;
  • The package includes one communicator with two-way communication function;
  • There is no way to control the security system using the standard key.

A 3D controller is built into the microprocessor module, with which you can determine the theft of a vehicle or any external influences on it. Maximum machine protection is ensured thanks to the built-in engine blocker, as well as encryption of communication channels.

The main difference between the Eco system and the Starline A63 model is that the package of this alarm does not include a spare communicator. But the consumer can independently purchase key fobs or tags.

The AutoAudioCenter channel presented a detailed overview of the functional features and capabilities of the Starline A63 Eco anti-theft system.

Instructions for use of alarm systems Starline A63 and A63 Eco

From the instructions that come with the alarm kit, the driver learns how to operate the security system, configure certain functions and connect additional equipment. The full operating manuals for the A63 and A63 Eco are presented below:

Starline a63 instructions

Starline a63 eco manual

In addition, the instructions contain detailed installation diagrams for the Starline A63 car alarm. You can view the connection diagrams here:

Installation of Starline A63

Installation of the anti-theft system is carried out with the battery disconnected:

  1. The ignition in the car turns off, and so do all energy consumers.
  2. A microprocessor system control module is installed. It is recommended to place it in a hidden place, inaccessible to strangers. Therefore, the unit should be placed under the plastic lining of the interior, for example, behind the instrument cluster, audio system or glove box. Installation must be performed in such a way that there are no electronic devices, sources of moisture or elevated temperatures near the device. During installation, the module is fixed in place using self-tapping screws or plastic clamps.
  3. A siren is installed under the hood of the car. It should not be placed near the cylinder block or exhaust manifold, since high temperatures will have a detrimental effect on its functioning. The siren should be placed with its horn facing down or to the side to prevent moisture from accumulating inside. The device must be installed in a hidden place so that the criminal does not have access to the device and its wires from under the bottom of the car.
  4. A transceiver module is installed on the inner surface of the rear or windshield. It is recommended to place it as high as possible to ensure maximum quality of transmitted signals. The surface of the glass must first be cleaned and degreased. To fix the device, double-sided tape or glue is used; the second option is more preferable due to its reliability. There should be no electronic devices or metal devices near the antenna; the distance from them should be at least 50 mm.
  5. A tilt and shock controller is installed in the center of the body in the cabin. It is recommended to place it on the partition separating the engine compartment. The fixation of the device should be as strong as possible so that the sensor does not vibrate or trigger unnecessarily.
  6. If you will use automatic engine start based on temperature, then you need to install a temperature controller under the hood. It must be embedded in the pipe through which the coolant circulates. The device must be properly fixed so that it is not washed away by the flow of antifreeze.
  7. The locking relay is installed in the area of ​​the ignition switch or in any other hidden place. Since this device is wireless, there will be no problems with its placement.
  8. The Valet button to activate the emergency mode is installed in the cabin. Its installation location must also be hidden, but the consumer must have access to it from the driver’s seat. For better camouflage, the button can be wrapped with black electrical tape.
  9. A Valet limit switch is installed on the hood. The push-button device must be located so that it cannot be accessed when the engine compartment is locked.
  10. The final stage involves laying the wires. They should not be placed near moving components (pedals, steering column), or sources of interference. The latter include electronic devices, ignition coils, and high-voltage wires. Installation is carried out under the interior trim. Additionally, the wires can be wrapped with electrical tape to disguise them and ensure maximum wear resistance.

User manual

Before using a car alarm, you must link the communicators to the control unit:

  1. Protection mode is disabled.
  2. The emergency mode entry button is pressed seven times. The siren will sound several times, indicating that you have entered the binding menu.
  3. On the communicator, press the first and second buttons simultaneously. The key fob should play a melodic signal.
  4. The previous paragraph is repeated for each registered communicator.
  5. After completing the task, the ignition is turned off.


Identification of buttons on the key fob

Remote start

To start the power unit on command, the first button (red) is pressed and held. The key fob should play a melodic signal. Indicators will appear on its display indicating the successful start of the car engine. To stop the power unit, first press and hold the first key, and then click button 4.

Before performing the task, you must ensure the following:

  • The handbrake lever is raised;
  • the car hood is locked;
  • The software neutralization procedure has been completed.

Video “How the security system works”

The Alex Tuning Center channel in its video showed how the Starline A63 anti-theft complex functions.

Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes (66.67%)

No (33.33%)

X

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate this article: ( 6 votes, average: 4.67 out of 5)

Discuss the article:

Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]