Fuel filter on a Chevrolet Aveo: where is it located, replacement

Operating a car on gasoline requires its maintenance. So, every 20-25 thousand km on a Chevrolet Aveo it is necessary to replace the fuel filter. For the second (T250) and third (T300) generations of this model, the process is identical, since only the body and some interior elements have been updated, but the main functionality has remained untouched.

Video about replacing the fuel filter on a Chevrolet Aveo:

The video will show how to quickly and effortlessly replace the fuel filter on a Chevrolet Aveo, and will also tell you about the nuances and tricks of the process.

Fuel filter replacement process

FinWhale fuel filter for Chevrolet Aveo T250 and T300.

Before you begin the actual process of replacing the fuel filter element, you need to find out where the product is located.

As in many other modern cars, the fuel filter is located under the rear right wheel.

The next stage of preparation is collecting everything necessary for a successful procedure. So, you will need a pit or a jack, a wrench or a 10mm socket, a new filter, and also, in most cases, WD-40 and a metal brush. Now that everything is at hand, we begin the procedure for replacing the fuel filter on a Chevrolet Aveo.

Chevrolet Aveo T300

For T250 and T300 they will be slightly different, so let’s look at the third generation first:

Open the hood and look for the mounting block.
Opening it, we see the fuses. It is necessary to pull it out with the marking F16 (blue for 15A). Remove the fuel pump fuse.
Now jack up the rear right wheel. Of course, everything is done from the pit much faster and more conveniently, but if there is none, then you will have to suffer. For greater convenience, you can remove the rear right wheel, then there will be more space.
Remove the ground wire.
On one side it is connected through a male-female terminal, and on the other it is screwed onto a bolt. Remove the ground wire.
For T300, you need to unscrew the protective bracket and dismantle it.

Unscrew the fastenings of the plastic protective clamp of the fuel filter.

Remove the protective cover from the filter.
We unclip the white gas line clamp, and then the blue one.

Using a screwdriver, unclip the plastic retainer for the fuel line.

Remove the white fuel line clamp. Unclip the blue fuel line clip from the filter.
Now that the filter is free, it can be removed from the mounting groove.
We remove the fuel filter for replacement.
Reassembly must be done in reverse order.

Chevrolet Aveo T250

Now let's look at how the fuel pump changes on the second generation Chevrolet Aveo:

The first three points completely coincide with the replacement with the T250.
In the engine compartment we find the mounting block and remove the fuel pump fuse.
For T250 - find the 8 bolts that hold the fuel filter mounting bracket and unscrew them. Find the fuel filter mounting bolts. Unscrew the bolts of the fuel filter mounting bracket.
Unclip the pipeline clamps and remove the filter with bracket.
Remove the fuel line clamps on one side and the other.
We install the grounding bracket on the new filter, and also do not forget about the grounding wire.
Install the mounting bracket onto the new filter.
We carry out the assembly in the reverse order.

Selecting a fuel filter

The fuel filter for the Chevrolet Aveo of the second and third generations is no different, therefore they will have the same catalog number. But, in addition to the original product, you can find analogues on the car market.

Original

Many car enthusiasts agree that only original filters should be installed on a vehicle, since it is also an American brand, the quality should be excellent, but this is not always the case. So, what original filter is suitable for the Chevrolet Aveo:

Original fuel filter 96537170 GM.

96537170 (manufactured by General Motors) – original fuel filter element. The average cost is 500 rubles.

Analogs

In addition to the original spare part, several of the world's leading analog manufacturers offer their filter elements, namely:

Bosch 0 450 905 976 is perhaps one of the most famous replacement brands.
A high-quality and inexpensive filter that is ideal for the Chevrolet Aveo. The average price is 400 rubles. Fuel filter manufactured by Bosch 0 450 905 976.
Mahle Original KL 470 – German filter with a price of 450 rubles.
MANN-FILTER WK 55/2 is another well-known German brand that has won the hearts of many domestic car enthusiasts and won over with its quality.
A filter element from the company will cost 400 rubles. Fuel filter manufactured by MANN-FILTER WK 55-2.
Nipparts J1330908 the cost of the Japanese substitute will be 300 rubles.
Starline SF PF7812 - a fuel filter from this equally well-known company will cost about 250 rubles.
Ufi 31.850.00 - the most expensive filter among analogues will cost the car enthusiast 500 rubles.
Daewoo 96537170 - a fuel cell from a Korean manufacturer will cost 450 rubles.
Onnuri 96537170 – average cost is 500 rubles.

conclusions

The process of replacing the fuel filter on a Chevrolet Aveo of different generations is almost the same.

Some design changes made to the T300, compared to the T250, had almost no effect on the technological process of changing the filter element.

It is worth noting that in addition to the original part, there are a number of analogues that can be used for installation on a vehicle.

Source: https://carfrance.ru/zamena-toplivnogo-filtra-shevrole-aveo-t300-i-t250/

Part selection

Many motorists doubt which fuel filter should be installed. Some say that it is only original, others say that there are analogues that are in no way inferior in quality. Experienced and professional motorists support the latter. You can install the original or a high-quality analogue on your car.

Original

96537170 Order from us (manufactured by General Motors) - an original fuel filter element. The average price at Russian car markets is 800 rubles.

List of analogues

Now let's move on to the list of analogues that can be installed on the Aveo T300:

Hi all. I'll tell you about replacing the fuel filter.

We buy the filter itself:

I also advise you to purchase clips that secure the hoses to the fuel filter (they are very fragile). Code 96 434 270

. They cost about 100 rubles each. They look like this:

We put the car on a pit (overpass), open the hood and take out the fuel pump fuse (blue, 15A):

Next we climb under the car to the area of the rear beam. The fuel filter is located near its right side.

The filter is held in an iron “clamp”, which is fastened with two 10mm bolts. It is impossible to get to the fastening of the clamp itself, so I decided to remove the entire structure and further disassemble the already removed one.

Next you need to remove the above-mentioned clips. I used a thin screwdriver to pry them off from the edge and pull them by the central part:

Now you need to remove the filter. You need to prepare a container in advance for draining gasoline (a little, 300 grams). Remove any hose from the filter and drain the gasoline. Same thing with the other hose. Remove the filter and unscrew the clamp bolt:

We replace the filter with a new one and assemble it in reverse order:

I broke one clip, so I put everything on a clamp. A couple of days later I bought clips and changed them. Actually, that's all.

The management clearly consisted of foreign specialists who find it difficult to imagine the quality of our fuel, so in reality such a replacement should be carried out no more than 30,000 km. mileage on roads using native gasoline.

Replacing the Chevrolet Aveo fuel filter, as on other passenger cars, is primarily triggered by chemical reactions between various impurities and fuel components.

Dust is sucked in through microcracks in the fuel supply, dirt from the fuel tank or containers where the fuel was stored, condensing moisture, various types of resins, added additives, impurities mixed by the gasoline supplier - all this when found in the fuel filter

begins to interact violently.

Need for replacement

In the case when the fuel filter reduces its performance characteristics and cannot fully function and cut off impurities from the fuel, then:

Resins contaminate spark plugs and disrupt the smooth operation of the ignition system;

Condensation, in turn, contributes to the development of corrosion processes, and is also a significant obstacle to starting the engine in winter;

The engine begins to overheat, the load on the mechanisms increases, the speed drops, and the power decreases;

As the load increases, fuel consumption increases;

Prolonged overheating of the engine can lead to it jamming with all the ensuing consequences.

If you ignore replacing the fuel filter to save money, or due to a lack of understanding of the seriousness of the problem, you can sometimes encounter serious damage.

Eliminating any of them, even replacing spark plugs, will cost him much more than replacing the filter, which can be done on his own.

Replacement procedure and measures

When starting work, it’s a good idea to take precautions. Keep a clean, dry rag on hand to quickly remove any buildup or gasoline stains.

A class B fire extinguisher should be within easy reach and use. Do not throw rags soaked in gasoline on the ground next to the car, but put them in a special iron container.

On a Chevrolet Aveo, the fuel filter is located in the rear of the right rear wheel

, so it is better to carry out work from the inspection hole.

Work order

First you need to turn off the power. This is best done by removing the fuse and disconnecting the supply circuit of the fuel mixture pump;
To relieve pressure in the gas system, for this purpose the two filter mounting bolts are unscrewed and the fitting tubes are disconnected. After this, the engine starts and is expected to turn off due to lack of fuel supply;
Since on this model the fuel filter is located in close proximity to the engine, there is no need to wait for it to completely cool down, which is at least 3 hours;
Having disconnected the “minus” from the terminal, the old filter is dismantled and a new one is installed in its place in the reverse sequence of operations.

A mandatory procedure that completes replacing the fuel filter on a Chevrolet Aveo, as well as on other brands of cars, is checking the tightness and quality of the fitting connections. To do this, start the engine and visually inspect the filter and its connections for leaks or leaks.

. Finally, the filter housing and connecting hoses are wiped with a dry, oil-free cloth.

We remind you that you need to buy auto parts only in trusted stores. The savings are not worth the breakdowns.

The technical documentation for the Chevrolet Aveo states that the fuel filter should be replaced every 30,000 km. mileage However, if we take into account the quality of fuel in our country, I would recommend changing the fuel filter at least every 15-20 thousand km.

Today I want to talk about how to replace the Chevrolet Aveo fuel filter with your own hands. There is nothing complicated in carrying out this operation, so I don’t see the need to go to a service station and overpay.

Chevrolet Aveo T300 – Changing the fuel filter

The Chevrolet Aveo T300 model does not have a fine gasoline filter in the usual sense of the word. There is only a mesh. It is located in the fuel module in the gas tank and performs the function of cleaning gasoline. To replace the mesh you will have to remove and disassemble the fuel module.

The replacement period depends on the quality (purity) of gasoline, approximately 30-50 thousand mileage. The main sign of contamination of the filter element is a decrease in traction; in particularly advanced cases, the engine begins to stall. Today we will figure out how to carry out the replacement operation yourself.

Selecting and purchasing a cleaning mesh

The Fortech FTP05 mesh has proven itself well. It costs about 2 dollars. As an alternative, you can choose to install a Longho FT05 cleaning mesh, the average price is $1.

Replacement procedure

You'll have to lift up the back seat to get to the filter.
Now use a screwdriver to pry up the cover and move it to the side.

Next, you will need to remove the chip with the wires (shown with a finger in the photo), start the car and wait until the engine stalls. This is required to reduce pressure in the fuel system.

Remove the terminal from the battery. This needs to be done for several reasons. Firstly, we de-energize the car for safety, and secondly, the system needs a reset so that the error message does not appear on the driver’s panel.

Now you can remove the pipes

. They are held on with clips. The photo above shows where you need to press with a screwdriver to remove the pipes.

Next you need to unscrew the metal washer. Workshops have special keys for such purposes. In your garage, you can get by with a screwdriver and a hammer. There are recesses on the outer perimeter of the washer; carefully place a screwdriver and tap with a hammer. Place the screwdriver in the opposite recess and continue until the washer gives way. We remove it and put it aside.

Now carefully lift the entire pump up. There is a float on the pump. It interferes with the pump output. Therefore, the entire structure must be tilted. Gasoline will flow from the pump - stock up on rags for wiping.

Let's summarize.

It is necessary to change the mesh on the fuel pump when installing (repairing) the fuel filter.
Fill your tank only with high-quality fuel from reliable gas stations.
Buy original spare parts from trusted manufacturers.

And most importantly, do not delay replacing a dirty filter. Otherwise, there is a high risk of serious consequences for the car.

The main task of a fuel filter device is to clean the fuel from unnecessary particles that have entered it. The presence of water in the fuel system causes rusting of the injectors, leads to the development of corrosion, and this leads to engine dysfunction and clogs the fuel system. This element of the car helps clean low-quality fuel from particles of resins and all kinds of additives that are added to fuel by unscrupulous manufacturers.

The fuel filter can become dirty as a result of:

accumulation of dust and dirt due to a possible chemical combination of gasoline with air and metal;
corrosion caused by water condensation;
accumulation of tarry sediment;
clogging of fuel equipment pipes with frozen water crystals at low temperatures.
using low quality fuel.

Replacing the Chevrolet Aveo fuel filter - instructions

You already have 30 thousand km on the speedometer (recommended by the manufacturer for replacing the fuel filter to replace the fuel filter during scheduled maintenance . However, if you are not afraid to get a little dirty, then you can do this simple procedure yourself and save some money.

Changing the fuel filter on Aveo T 250

To replace the filter, we will need a jack, WD-40 spray, a screwdriver and wrenches (it is more convenient to use tubular wrenches).

The fuel filter on the Chevrolet Aveo T 250 is located behind the right rear wheel, next to the fuel tank. You can get to it if you drive into a hole, or crawl into this place, lifting the rear right side with a jack (remember about safety!).

Before removing the fuel filter, find the fuse in the engine compartment fuse box (article on the topic “Aveo fuse diagram”), which is responsible for the operation of the fuel pump (read “Replacing the fuel pump grid”), and remove it.

Removing the fuel pump fuse

Then start the engine and let it run until the fuel system runs out of gas. This procedure will help relieve pressure in the fuel system.

Now you can crawl under the car and look for where the fuel filter is. Once you reach the filter, spray the bolt that secures the protective casing and ground wire with WD. Then disconnect the "ground" wire,

Disconnect the fuel filter ground wire

unscrew the fixing clamp bolt

Unscrew the fixing clamp bolt

and remove the fuel filter protective cover.

Remove the filter protective cover

Now carefully use a thin screwdriver to remove the plastic retainer from the tip of the fuel pipe

Remove the plastic retainer

and remove it.

Remove the plastic retainer from the filter

On the other side of the filter, the plastic retainer is removed by squeezing the antennae.

Remove the clamp on the other side of the filter

Remove the fuel filter from the mounting bracket and insert a new one in its place (pay attention to the direction of fuel movement through the filter).

Chevrolet Aveo fuel filter is ready for replacement

We perform all steps to install the filter in reverse order.

After connecting the fuel pump fuse, turn on the ignition and crawl under the car again to check the connections for leaks.

Advice: if you often refuel with fuel of poor quality, and this is not uncommon in our country, it is recommended to reduce the replacement interval for the Chevrolet Aveo fuel filter by half.

What, you haven't read it yet? Well, it's in vain...

Click the buttons and share with your friends!

Source: https://chevy-aveo.ru/remont-dvigatelya/zamena-toplivnogo-filtra-shevrole-aveo/

KINDS

The fuel filter is one of the elements of the fuel supply system. Its task is to filter rust and dirt that is in the fuel tank. In addition, at domestic gas stations, the quality of fuel also leaves much to be desired. Quite often, the fuel that is poured into a car tank contains particles of metal, sand, etc. The filter is also responsible for removing water from the fuel.

Depending on the type of power unit and the fuel supply system to its cylinders, fuel filters are distinguished for:

diesel engines;
engines equipped with fuel injection systems;
carburetor engines.

Structurally, different types of filter elements provide different degrees of fuel purification. For example:

filters for carburetor engines must prevent large solid particles with a size of at least 20 microns from entering the cylinders;
filter elements of injection power units protect the cylinders from particles with sizes of 10 microns or more;
diesel engines require more thorough cleaning (particle size about 4 microns). In addition, such filters should remove water as much as possible.

How to change the fuel filter on a Chevrolet Aveo

Any car is equipped with several types of filters - air, oil and fuel. They belong to the so-called consumables and are changed at almost every service. Some manufacturers, however, set higher mileages. A typical example is Chevrolet, which recommends changing this part on its Aveo model every 30 thousand km. But in Russia, alas, gasoline is not always of high quality, and the filter actually breaks down earlier - at the turn of 15 or 20 thousand. Ideally, to replace it, you need to go to a service center (where they will ask for 1000-1500 rubles for the work), but In practice, you can do everything yourself. In this article we will describe in detail how this procedure is carried out, its subtleties, and also where the fuel filter is located on a Chevrolet Aveo.

Tools and materials

Jack (optional);
WD-40;
Screwdriver;
Set of wrenches;
New original GM filter (catalog number 96537170).
A few liters of gasoline and a funnel.

Also, don’t forget to prepare clothes that you don’t mind getting dirty. If desired, you can use gloves.

Before starting work, drain all gasoline from the tank or leave the car idling for a while so that it uses up all the fuel.

1) If you have the opportunity to park your car on an overpass or pit, do it. Otherwise, after completing step 3, use a jack - you need the right rear side of the car.

2) Stop the engine if it was running.

3) Open the hood, find the fuse box. There are tweezers on the back of its lid (if not, tweezers will do). Use them and pull out the blue fuse (15A). There is an arrow pointing to it in the photo.

4) Then crawl under the car and find the fuel filter.

5) Its mounting bolts are usually covered with dirt and are difficult to unscrew. Spray them with WD-40.

6) First, you will need to disconnect the ground from the filter housing.

7) Take a 10 mm wrench or a socket and unscrew the bolt that secures the clamp. Ready? Remove the ground wire.

Now remove the protective cover.

9) Get to the pipes. Take a screwdriver and carefully try to remove the retainer from the tube tip. Be careful, it can break easily!

10) Remove the tip of the light tube.

11) Repeat steps 9 and 10 for the dark tube.

12) Now you can remove the filter itself. To do this, unscrew the 2 bolts located on the side of the beam (see photo).

13) Remove the old filter and install the new one.

14) Assembly is carried out in reverse order. Remember, tube clamps are fragile and must be handled with care!

15) Reinstall the removed fuse.

16) Remove the car from the jack (if one was used), fill with 3 or 4 liters. gasoline. Start the car and observe if there are any leaks or wet spots of fuel anywhere. Correct leaks if necessary. If all is well, then the filter replacement can be considered successful.

On average, replacing a fuel filter on a Chevrolet Aveo takes about 1 hour if all the tools are ready and there is no fuel in the tank.

In conclusion, I would like to say that this procedure requires strict adherence to fire safety. Do not smoke near the car, remove all sources of open flame and have at least a fire extinguisher handy from the car. Remember, it is better to take a little time and protect yourself, otherwise tragedy may occur.

conclusions

All of the instructions described above are designed so that even the most unprepared car enthusiast can independently remove the fuel pump on his Lada Kalina; the most important thing is not to rush, do everything consistently and carefully!

Welcome! Fuel pump - is responsible for supplying fuel from the tank to the car engine; if it fails, fuel stops being supplied to the engine and therefore the car will not start, or over time it may simply start to work worse and in this case the car will twitch when driving and it will lose dynamics (the fuel pump in such a situation will still pump fuel into the engine, but it will do it very much), besides this, the fuel pump no longer serves anything, although if you think about it, it goes first together with the Fuel Level Sensor , secondly, there is still a mesh on it that cleans gasoline from dirt, so we can say, thanks to the gas pump, we also find out how much fuel is left in the tank and even before this fuel goes into the engine, it is cleared of small particles of dirt, by the way, we will give advice, If you don’t want to change the fuel pump very often, then try never to bring the gasoline in the tank to the very minimum and especially do not drive the car until it runs out of gas (Only do this in rare cases or because of the situation), otherwise such trains will not lead to anything good and soon the fuel pump (this is its second name) will become unusable.

Note! To replace this pump on a car, you will need a set of tools in which: Screwdrivers will be lying around, a hammer and a drift, but in principle, the help of screwdrivers will be enough (But this is only if you don’t have a hammer with a drift, if you do, be sure to take them)!

Where is the fuel pump located? It is installed inside the tank and through fuel pipes it pumps fuel from the tank to the car's engine, but not all people know where the tank is located on front-wheel drive cars, let's explain briefly, on classics many people even saw it when the trunk was opened (It's just that on classics it's in installed in the most visible place and if the trunk is not covered with a trim, as for example on a VAZ 2101 car this is done, there is no trim unlike the same 2107, for example, then the gas tank can be easily seen), but with regards to front-wheel drive, the gas tank is located under the bottom , and the fuel pump is inserted into it from above, so in order to get to the pump it will be enough to remove the rear seat cushion and then, by folding back the standard carpet and unscrewing the fuel pump flap (Indicated by a red arrow), you will immediately see the pump itself, for clarity it is indicated by a blue arrow in the photo below:

Replacing the Chevrolet Aveo T250 fuel filter with your own hands

We will show you photo and video instructions on how to replace the fuel filter on a Chevrolet Aveo T250 with your own hands.

The fuel filter is located behind the rear right wheel. Before unscrewing the fasteners of the bar, lubricate all the bolts with WD-40 penetrating lubricant; due to constant exposure to sediment, the fasteners become sour and can be very difficult to unscrew. Using a 8mm head, unscrew 2 small bolts:

The filter will move down a little. It remains to unscrew the last 8 bolt, which we compress the filter housing. Next, press the plastic clip and twist it with your hands:

Fuel will flow, you can, as in our case, simply place a bottle to drain. If you don’t want to get dirty, then with the car running, pull out fuse F16, which is responsible for the operation of the fuel pump, wait a couple of minutes until the remaining fuel in the system burns out and get to work.

On the other side, press the latch in the same way and pull:

If you cannot press normally, you can use pliers. We couldn’t unscrew 1 bolt, so we cut it off with a grinder and installed a through bolt in its place. Attaching the new filter:

We snap the fuel pipes, tighten the bolts, I recommend lubricating them with copper grease so that there are no problems during further replacement.

Video of replacing the Chevrolet Aveo fuel filter

Backup video on how to replace the Chevrolet Aveo fuel filter:

Read times: 439; Today: 1

Source: https://remontautohelp.ru/zamena-toplivnogo-filtra-shevrole-aveo-t250-svoimi-rukami/

Security measures

If you decide to replace the fuel filter in your car yourself, then you must adhere to some rules:

It is best to carry out the replacement in a well-ventilated area, because in a closed space, explosive fuel vapors can accumulate, which can ignite at the slightest spark; Just in case, you should keep a fire extinguisher near you; Smoking is strictly prohibited when replacing the fuel filter;

After the engine is turned off, accumulated ghosting still remains in the fuel line. It must be completely bled before you begin to remove the fuel filter. In order to prevent sparks from forming, it is best to remove the terminals from the battery. These are simple precautions, but they are best adhered to.

Replacing the Chevrolet Aveo fuel filter

When I purchased the car, there were already 82 thousand km on the odometer, and this is a sign that I urgently need to go over the replacement of consumables. In this article I talk about replacing the fuel filter.

You can change the fuel filter in a garage, but with the money saved, I would recommend buying a high-quality filter. Every car enthusiast knows that the life of the engine depends on the quality of the filter.

I recommend that those who change the filter themselves - change clothes and take gloves! I didn't take this into account and got very dirty.

Fuel filter replacement tools

You won't need too many tools:

Jack or inspection hole
WD-40 (I recommend carrying it with you always and everywhere).
Two screwdrivers.
Tubular keys. I didn't have any, so I used regular nuts.
Dress in such a way that you don’t mind getting dirty.
Gloves.

Instructions for replacing the fuel filter

The fuel filter is located under the right rear wheel, near the gasoline tank. The only way to get to it is to drive onto an overpass or jack up the rear RIGHT side of the car. Also, before replacing the fuel filter, it is necessary that there is a minimum of gasoline in the car! More precisely, that he wasn’t there at all.

It can either be drained or rolled out. Personally, I arrived and according to calculations, I had 1-2 liters left (I didn’t specifically fill it up). I left it running at idle and after an hour it died. That's when I realized it was time to get started. Replacement procedure:

First you need to remove the fuse that controls the operation of the fuel pump. It is located in the fuse box under the hood. What will happen if it is not removed - I will remain silent.
Climb under the car and find the fuel filter. We immediately use WD-40 - spray it on the bolt that secures the protective casing and ground wire.
Disconnect the ground wire.
Unscrew the bolt of the fixing clamp.
Remove the fuel filter protective cover.
Now you need to remove the plastic retainer from the tip of the fuel pipe. Here you will need a thin flat screwdriver.
On the other hand, the plastic retainer is removed by squeezing the antennae. There, everything immediately becomes clear on the spot.
Remove the old fuel filter from the mounting bracket.
Install the new one into the seat. Pay attention to the direction of fuel flow through the filter. There are arrows there, you need to navigate by them!
After installing the filter, install all parts in the reverse order of dismantling.
Connect the fuel pump fuse.
Pour in a little gasoline (3-4 liters, no more, otherwise you might have installed something wrong and have to take it apart again).
Start the engine and check for fuel leaks anywhere.

That's all, replacing the fuel filter took me no more than 1 hour (not counting the hour of waiting for the gasoline to run out). In general, I recommend changing the filter every 10-15 thousand km, like the oil and air filters.

I justify this by the fact that the manufacturer, which recommends changing the fuel filter every 30 thousand km, has no idea what quality our fuel is. God protects those that are taken care of, especially since they don’t cost exorbitant amounts of money, and replacement takes a little time.

Source: https://grandrepairauto.ru/zamena-toplivnogo-filtra-chevrolet-aveo.html

Fine filter for Chevrolet Aveo: replacing the Aveo fuel filter in a sedan and hatchback

Many drivers do not attach due importance to the condition of the car's fuel filter. Most novice car enthusiasts do not even think about the fact that the Aveo fuel filter should be replaced from time to time, and they remember this only when the condition of this element of the fuel system is already so deplorable that it makes itself felt by interruptions in engine operation.

But even in this case, many car owners begin to look for the cause of the malfunction in the engine itself (in particular, in the operation of the gas distribution mechanism), in the gas pipeline, in the operation of the gas pump, and even blame the quality of gasoline.

Trying to understand the reason for the decrease in engine power, they examine the gas line centimeter by centimeter, without seeing the obvious: the fuel filter is so clogged that it does not allow gasoline to pass through in the amount required by the engine.

Fuel system design

Another thing is the fine filter. It is a sealed capsule with inlet and outlet holes, inside which the filter element itself is placed - as a rule, it is micro-perforated parchment paper folded like an accordion. This filter filters out significantly smaller foreign particles from the fuel. And since there is nowhere for them to settle, once in the filter, they accumulate in it, gradually clogging it until it becomes completely obstructed. So, when it comes to the fuel filter, we mean replacing the Aveo fine filter.

Design features of the Aveo fine filter

The fact is that on this car the unit we are considering is located extremely poorly, so replacing the Chevrolet Aveo fuel filter is a very difficult procedure. The designers of this car, apparently, considered that the service life of the part we are considering is endless and assembled the main elements of the fuel system - both filters and the fuel pump - into a single module, placing it on the gas tank. Theoretically, this module is a non-separable structure, so if the filter becomes clogged, you will have to replace the entire unit completely.

This is what will most likely be offered to you at the branded service. At a multidisciplinary service station, the craftsmen know perfectly well that in practice the fuel module can be disassembled and, if necessary, repaired.

So a separate replacement of the fuel filter on an Aveo is quite feasible. True, this requires some experience of the master.

It is extremely undesirable to undertake this procedure yourself - you risk damaging other components of the module, which will increase the cost of subsequent repairs.

Reconstruction of the fuel system or replacement of the Chevrolet Aveo fuel filter?

It makes sense to do this when the entire fuel unit fails. In this case, the original fuel pump can easily be replaced with almost any other one of similar power, and with it the filter.

Troubleshooting the Kalina fuel pump

If the electrics are working correctly, the fuel pump remains the object of close study. Replacing the fuel pump assembly is an extreme, and not at all mandatory, measure.

If the fuel pump does not turn on during normal electrical operation, remove the device to check the fuel pump. To check the functionality of the fuel pump, you need to remove the cover, which is located in the rear of the car, and remove the unit itself.

If the pump does not pump or pumps intermittently, it may be necessary to replace the Kalina fuel pump mesh. We remove the cover, disconnect the hoses and wires, use screwdrivers to press out the retaining ring and gain access to the pump. The device itself is located in the gas tank and takes gasoline directly from the tank.

Routine work, which would include replacing the mesh, is not specified in the operating instructions for the Lada Kalina. Repairing the fuel pump in order to replace the mesh should usually be carried out after 50 thousand kilometers, since the fuel at Russian gas stations is generally of low quality.

During dismantling, this can be assessed visually; the mesh turns from white to dirty brown interspersed with mechanical residues of metal, dirt and oil. At the bottom of the glass, when dismantled, you can see solid particles of unknown origin, which could only get into the tank when refueling.

There is also the opinion of some experts about the possibility of washing the mesh without replacing it

But taking into account the cost of this part, which does not exceed 100 rubles, the advisability of flushing during the rather complex procedure of removing and installing the fuel pump is highly questionable. It is also worth pointing out the culture of repair work: after disassembly, all parts must be cleaned of dirt and foreign impurities , thoroughly washed and installed in their original place without using excessive force. When replacing the mesh, it is advisable to replace the fine filter, which is located in the rear right wheel arch near the jack cup

Routine work to replace the filter is provided for during maintenance every 30 thousand km.

When replacing the mesh, it is advisable to replace the fine filter, which is located in the rear right wheel arch near the jack cup. Routine work to replace the filter is provided for during maintenance every 30 thousand km.

Separately, it is worth pointing out the culture of repair work: after disassembly, all parts must be cleaned of dirt and foreign impurities, thoroughly washed and installed in their original place without the use of excessive force. When replacing the mesh, it is advisable to replace the fine filter, which is located in the rear right wheel arch near the jack cup. Routine work to replace the filter is provided for during maintenance every 30 thousand km.

When pumping gasoline to the nozzle, 2 more grids are installed along the way to clean the fuel. One is located in front of the fuel pressure regulator, and the last cleaning line is installed before the injector inlet. But before these filters, gasoline arrives in a dirt-free state and fault diagnosis based on these barriers is practically not carried out, due to the low probability of the need for replacement.

The fuel system of the Lada Kalina car is a reliable and well-functioning combination of units that can ensure uninterrupted operation of the car for a long period of time with timely and correct maintenance. They include a mandatory replacement of the fine filter every 30 thousand km and, highly desirable, replacement of the fuel pump mesh after approximately 50 thousand km.

Stable engine operation is ensured by a number of systems and mechanisms. One of such systems, including for the Lada Kalina, is the power supply system. Among the components of this system, the key role is played by the fuel pump, which ensures an uninterrupted supply of fuel to the gasoline injection parts - special nozzles.

Chevrolet Aveo fuel filter replacement interval: technology

Many car enthusiasts are wondering what is the interval for replacing the fuel filter on a Chevrolet Aveo. Is there a generation difference? What factors influence the service interval.

Video

The video will tell you how to change the fuel filter on a car, and also tell you about the features of the process and the change interval

Replacement interval

Depending on the region of sale and marketing trends, Chevrolet Aveo is also known as Chevrolet Sonic, Zaz Vida or Ravon Nexia. In different years of production, the car was equipped with engines of 1.2, 1.4, 1.6, 1.5 liters. There were even configurations with a 1.3 liter diesel engine, but it is quite difficult to find such an Aveo in the domestic open spaces.

Fuel filter.

How often should I replace it? The manufacturer regulates the replacement of the fine fuel filter on a Chevrolet Aveo every 45 thousand kilometers or once every three years, whichever comes first. If you refuel at proven gas stations, then, as practice shows, there is no need to reduce the intervals for replacing the fuel filter (FF).

Maintenance table.

Constant refueling with low-quality fuel will lead to critical contamination of the filter element, which can be recognized by the following symptoms: the engine is reluctant to develop speed; When you sharply press the gas pedal, the increase in speed occurs with a delay.

It is typical that during sharp acceleration from low speeds the engine may begin to “choke”; Difficulty starting the engine. If the fuel pump is working properly, but normal pressure does not develop in the fuel rail, the fine filter filter and the mesh bag inside the tank should be replaced.

Conclusion

Quality control of the Chevrolet Aveo fuel filter is carried out during each maintenance or every 15 thousand km. The fuel cell is replaced after 45,000 km or once every three years.

Source: https://koreanautoreview.com/chevrolet/aveo/pri-kakom-probege-nuzhno-menyat-toplivnyj-filtr-na-aveo.html

When to change, what interior to install

To perform scheduled maintenance operations, there are regulations, as well as manufacturer recommendations. According to them, replacing the cabin filter of the Chevrolet Aveo II T300 heating and air conditioning system should be done every 15,000 kilometers or once a year.

Considering that the operating conditions of the car in most cases will be far from ideal, experts advise performing this operation approximately twice as often, in spring and autumn.

Characteristic symptoms:

Windows often fog up;
the appearance of unpleasant odors in the cabin when the airflow is turned on;
deterioration of the stove and air conditioner;

They may make you doubt that the filter element is coping with its tasks and an unscheduled replacement will be required. In principle, these symptoms should be relied upon when choosing the correct replacement interval.

Suitable sizes

When choosing a filter element, owners do not always use products recommended by the car manufacturer. Everyone has their own reasons for this, some say that the original is unreasonably expensive. Some people in the region sell only analogues, so there is a need to know the sizes by which you can subsequently make a selection:

Height: 35 mm
Width: 204 mm
Length: 240 mm

As a rule, sometimes analogues for the Chevrolet Aveo II T300 may be a few millimeters larger or smaller than the original, there is nothing wrong with that. And if the difference is measured in centimeters, then of course it’s worth looking for another option.

Selecting an original cabin filter

The manufacturer recommends using exclusively original consumables, which, in general, is not surprising. They themselves are of good quality and are widely available in car dealerships, but their price may seem overpriced to many car owners.

Regardless of the configuration, on all second-generation Chevrolet Aveos (including the restyled version), the manufacturer recommends installing a cabin air filter, a dust filter with General Motors GM number 13271190 or a carbon filter with General Motors GM number 13271191.

It is worth noting that sometimes consumables and other spare parts may be supplied to dealerships under different part numbers. Which can sometimes confuse those who want to purchase an original product.

When choosing between a dust and carbon product, car owners are advised to use a carbon filter element. This filter is more expensive, but it cleans the air much better.

It is easy to distinguish - the paper filter accordion is impregnated with a carbon composition, and therefore has a dark gray color. The filter cleans the air flow from dust, fine dirt, germs, bacteria and enhances the protection of your lungs.

Which analogues to choose

In addition to simple cabin filters, there are also carbon filters that filter the air more effectively, but they are more expensive. The advantage of coal SF is that it does not allow foreign odors coming from the road (street) to penetrate into the car interior.

But this filter element also has a drawback - air does not pass through it well. GodWill and Corteco carbon filters are of fairly high quality and are a good replacement for the original.

However, in some retail outlets the price of the original second-generation Chevrolet Aveo cabin filter may be greatly inflated. In this case, it makes sense to purchase a non-original consumable item. In particular, cabin filters are considered quite popular:

Conventional dust cabin filters

MANN-FILTER CU 2442 – technologically advanced consumables from a well-known manufacturer
BIG Filter GB-9941 – popular brand, good fine cleaning
TSN 9.7.764 is a good manufacturer with a reasonable price

Carbon cabin filters

MANN-FILTER CUK 2442 – high-quality and thick carbon coating
BIG Filter GB-9941/C – activated carbon
TSN 9.7.765 – normal quality, affordable price

It makes sense to take a closer look at the products of other companies - they also specialize in the production of high-quality consumables for passenger cars:

Amd
Bosch
Denso
Filtron
Fortech
JS Asakashi
Knecht Mahle
Kortex
Masuma
Miles
Raf filter
SCT
Sakura
Stellox
Valeo
Zekkert
Nevsky filter

It is quite possible that sellers may recommend replacing the Aveo II T300 cabin filter with non-original cheap substitutes with a much smaller thickness. They are not worth buying, since their filtering characteristics are unlikely to be at the proper level.

How to Replace the Fuel Filter on a Chevrolet Aveo ~ AUTOTEXNIKA.RU

How to replace the fuel filter on a Chevrolet Aveo

No matter what kind of car is equipped with several types of filters - air, oil and fuel. They belong to the so-called consumables and change at virtually every service. Some manufacturers {domestic, but, set higher mileages.

A common example is Chevrolet, which recommends replacing this part on its own Aveo model every 30 thousand km. However, in our country, as annoying as it may sound, gasoline is not often of high quality, and the filter actually burns out earlier - at the turn of 15, or, in other words, 20 thousand.

Fortunately, to replace it, you need to go to a service center (where they will ask for 1000-1500 rubles for the work), but in practice, what remains to be done is for our client to do himself.

Next, we will carefully explain how this procedure is carried out, its subtleties, and of course where the fuel filter is located on the Chevrolet Aveo.

Tools and materials

Jack (optional);
WD-40;
Screwdriver;
Set of wrenches;
New unique GM brand filter (catalog number 96537170).
A few l. gasoline and funnel.

You also need to think about preparing clothes that you don’t mind getting dirty. If desired, use gloves.

How to change the fuel filter on a Chevrolet Aveo

Before work, drain all the gasoline from the tank or leave the car idling for a couple of weeks so that it runs out, leaving fuel for our client.

How to replace the fuel filter on a Chevrolet Aveo

1) If you can park your car on an overpass, or in other words, a pit, you can do it. Otherwise, after completing step 3, use a jack - you need the right rear side of the car.

2) Turn off the engine if it was running.

3) Open the hood and you will find the fuse box. There are tweezers on the back of its lid (if not, tweezers will do). Use them and remove the blue fuse (15A). In the photo there is an arrow pointing to this address.

Replacing the fuel filter Chevrolet Aveo (Chevrolet Aveo)

Video about replacing the fuel filter

by car
Chevrolet Aveo
.
replace the fuel filter
on
a Chevrolet Aveo
.

4) Then crawl under the car and find the fuel filter.

5) Its mounting bolts, you, are covered with dirt and are difficult to unscrew. Spray them with WD-40.

6) First, it will be enough to disconnect the grounding from the filter housing.

7) Take a 10mm wrench, or the head, and unscrew the bolt that secures the clamp. Ready? Remove the ground wire.