The cabin filter cleans the air coming in from outside. It traps dust, pollen and foreign bodies. Using a carbon filter allows you to clean the air from odors and harmful impurities.
During the operation of the car, the filter element gradually becomes clogged. As a result, its throughput is reduced. The stove and climate system begin to work less efficiently.
The problem with a clogged filter can be solved by cleaning or replacing it. If you are installing a new product, you must purchase an original filter element or follow the recommendations of experienced owners on choosing a consumable. In order for the filter to perform its intended functions efficiently, maintenance intervals must be strictly observed.
The importance of having a cabin filter
Experienced drivers are often very conservative.
In their opinion, a cabin air purification filter is an exaggeration, which also requires additional costs and maintenance efforts. After all, the cabin analogue, being the same consumable item as a standard air filter, requires periodic replacement, but concern for the health of people inside the car is not comparable to the effort spent on replacing it. The fact is that about 100 cubic meters of air pass through an average passenger car per hour (this is approximately 100 thousand liters), and even if we assume that the dust concentration does not exceed the maximum permissible concentration (0.5 mg / cubic meter), then in 120 minutes the filter settles about one gram of suspended particles measuring 2.5 micrometers. The greatest danger to humans is microscopic dust (a fraction up to 10 microns in size easily penetrates the respiratory tract, and even smaller particles - into the lungs). Considering that on country dirt roads and on busy city highways the concentration of pollutants is many times higher than the maximum permissible dosage, the presence of a cabin filter becomes a prerequisite for creating the most comfortable and safe microclimate for health.
Conventional dust filter elements successfully cope with the task of capturing up to 90% of suspended particles of various sizes, which are usually invisible to the naked eye. Carbon cabin filters can also absorb many volatile substances, preventing unpleasant odors and carbon monoxide from entering the cabin.
Note that the Toyota Corolla 120 cabin filter can usually be made impervious to any substances in the air, but in this case its ability to pass air will also suffer, so designers are forced to strike an optimal balance between these two most important characteristics of the filter material.
Replacing the cabin filter on a Toyota Corolla with a 110 body with your own hands
In general, the scheme of work does not differ from the first one, but there are certain features. Procedure:
- Find the filtration element in the car interior behind the glove compartment, open the glove box, unclip the fastenings on the left and right at the top.
- Find the cabin body, closed with a plug.
- Unscrew the cover and remove the filter.
- Compare old and new parts, if there are no serious discrepancies, install the item.
If necessary, clean the mounting mounts of the filtration elements - napkins and rags will be useful. Assembly is carried out in the reverse order of disassembly.
Beginners sometimes have difficulty attaching the element. You need to make sure that it fits in size; if not, you will have to make adjustments. It is also important to get into the grooves and make sure that there is a click. If the matter is not brought to fruition, the element will not fit securely enough, which will affect the quality and service life of it.
Choosing the right filter
Before you think about the correct installation of the purifier, you must first purchase it. We recommend purchasing filters and other auto parts from official Toyota dealers. Of course, the price at the dealership will be higher than if you bought it at a regular store, but products purchased at authorized retail outlets are covered by the manufacturer's warranty.
To make the right choice of filter, you need to know the make of your Toyota engine, year of manufacture and chassis number. All this information can be gleaned from the state registration certificate of the car. Based on this data, use the catalog - finding the right product will not be difficult. If you have any questions regarding your selection, please contact the store consultants.
Replacing the filter yourself
If your hands are growing, replacing the Toyota Corolla cabin filter element is not a problem. Before replacing the cabin air filter on your Corolla 150 without assistance, empty the glove box.
How to replace the interior shock absorber:
- Empty the glove compartment;
- When the cold season changes, it is better to insulate the car in advance, because fresh plastic is fragile, so it often breaks when pressed;
- To remove the glove box, carefully slide the side walls and open the locking elements of the box slide;
- Remove the glove box from the hooks at the bottom of the glove box;
- At the back there is a cover covering the cabin filter. To remove the part, simply press the side latches attached to the body
- Pull out the dust protection element. Beware of debris getting into the air duct and heating fan, handle it very carefully, do not shake the filter too much;
- Connect the new filter.
Once the installation of the new absorber is complete, install the filter cover, then install the glove box.
How often should I change the filter element?
In accordance with the manufacturer’s recommendations, scheduled work to replace the filter in the cabin of the Toyota Corolla 150 should be carried out every 20 thousand kilometers.
However, in our realities, such an interval is not justified: in the vast majority of cases, filters stop performing their cleaning function much earlier. Therefore, it is really better to change the cabin air filter every 10 thousand kilometers.
The exception is for cars used in northern regions, where low temperatures last much longer, which means that the filter becomes dirty much less often.
Signs that require replacing the air purification filter in the Toyota Corolla 150:
- persistent unpleasant odors, the intensity of which increases when the air conditioner is turned on;
- reduce the power of the outgoing air flow through the deflectors;
- increased appearance of dust in the cabin even with frequent wet cleaning;
- fogging of windows for no apparent reason.
Substitution rules
On the Internet you can find many different videos about how to install and choose the type and number of filter for cars in the back of E 100 and others. Usually there are no strict restrictions; the main thing is to choose a high-quality element that is suitable in size. In a Toyota Corolla, the process of replacing the cabin filter does not require special tools and can be quickly completed without going to a service station. Typically, the cabin air filter is located behind the glove compartment.
Before changing the cabin filter, you should prepare your work area by freeing up space in the front passenger seat. Empty the glove compartment and open the front passenger door.
While working, you may need to lie down, and in order to avoid getting dirty, it is recommended to spread something both on the floor of the car and on the ground in front of the open door.
The replacement step by step looks like this:
- It is necessary to open the glove compartment and press the latches on the right and left on which it is held, thus removing the lid and gaining access to the filter container.
- The container located behind the glove compartment must be opened; to do this, press the buttons on its lid and remove it.
- After that, the used old consumable is removed from the compartment, and its location is wiped with a damp cloth.
- After the location of the filter element has dried, you should begin installing a new one. It is very important to consider the correct installation method. Most often, arrows on the consumable itself indicate the direction of installation.
- Then you should install the covers in reverse order, first on the compartment with the filter, and then on the glove compartment.
Typically, all elements are simply and tightly inserted into their grooves, and the process does not take much time.
What are car filters?
All interior cleaners can be divided into two types: dust-proof and carbon. Dust protection devices are a rectangle of corrugated cellulose paper or synthetic fibers laid in rows. The fiber, in addition to dust particles, is capable of retaining soot, pollen, and heavy compounds. The paper on some models is pre-treated with chlorine and may prevent the spread of bacteria.
More on the topic:
- How to choose the right auto parts
Cabin dust filter
The carbon version is a more “advanced” continuation of the anti-dust version. The filter fiber contains formed carbon particles, which are known to be excellent absorbents. The carbon filter element has a higher density and is able to capture smaller particles such as nitrogen and sulfur oxides, benzenes and phenols. These carcinogens are very dangerous to human health and can cause the development of diseases of the respiratory system. When carcinogens interact with charcoal, the charcoal particles absorb and partially neutralize them.
Carbon cabin filter
Article number and cost of the original cabin filter for Corolla 150 and its analogues
Filters with different catalog numbers are installed on the Toyota Corolla 150; the set depends on both the country to which the car is exported and the year of manufacture. At the same time, the replacement filter cassettes are completely interchangeable. The cost of standard brand filter elements varies from 450 to 800 rubles. Below are the catalog numbers of cabin filters:
- 8713952020;
- 87139YZZ20;
In addition to the original filter for the Toyota Corolla 150, a number of analogues are produced from third-party manufacturers. The best are presented in the table below.
Table - Analogues of the cabin filter on the Corolla 150
Director | Seller code | Cost, rub |
Sakura | CAC1112 | 280-320 |
Knecht-Mahle | LA395 | 300–350 |
Starline | SFKF9470 | 200–220 |
Planimetry | ADT32514 | 240–260 |
Dense | DCC1007 | 360-400 |
Spare parts-Mall | PMF081 | 180-200 |
Masuma | MC2038 | 300–340 |
The carbon filter is also used on the Toyota Corolla 150. Its cost is from 700 to 1200 rubles. Here are the article codes of the original carbon filters installed on the car:
- 8713902020;
- 87139YZZ16;
- 17801YZZ06;
- 0897400820;
- 871396080;
- 8713950100;
- 87139YZZ08;
- 87139YZZ10.
Third-party manufacturers produce branded analogues of carbon-based products that are not inferior to the original in terms of characteristics and quality. The table below provides a list of the best brands.
Table - Analogues of the carbon filter on the Corolla 150
Business | Article number | Estimated cost, rub |
Nipparts | J1342027 | 320–370 |
Planimetry | ADT32522 | 240–280 |
Benefit | 15203112 | 220–260 |
Spare parts-Mall | PMF077 | 200–280 |
Parts of Japan | FAATY13 | 140-200 |
Brother star | XDK113 | 160-1900 |
Interparties | HICP107 | 190–240 |
Cabin filter location
The cabin air filter on the Corolla 150 is located directly behind the glove box on the passenger side. Unlike previous Toyota models, the filter does not have a special frame, but is installed in the body.
Cabin filter position
The filter element is located in the path of the air flow, which enters the radiators of the stove and air conditioner. For this reason, it directly affects the creation of a comfortable climate inside the car.
How often should I replace it?
In accordance with the manufacturer's regulations, the cleaning element is updated every scheduled maintenance - after 20,000 km .
For CIS countries, it is rational to reduce the replacement interval to 10,000 km. We take into account the level of dust and gas pollution in regions and megacities. In summer, the resource is reduced by fallen leaves and poplar fluff, which is absorbed by the air flow. In winter there is excess moisture, which contributes to the emergence and development of pathogenic bacteria.
Most motorists follow the recommendations in the operating instructions, which is also true.
The problem of choosing a cabin filter
The SF standard installed on the Toyota Corolla is a regular dust-proof product with catalog number 87139-YZZ07, the cost of which is within 400 rubles. Analogues of comparable quality can be found for half the price, so even if the presence of foreign odors is not a problem for you, using a non-original filter element may be preferable from a financial point of view. The original coal product (catalog number 88568-52010) costs much more - 1000 rubles, but here you can find analogues with a much lower price. We invite you to familiarize yourself with the list of cabin filters suitable for installation on Toyota Corolla cars in both body styles (120/150):
- Asam (catalog number 70345, price from 210 rubles);
- Agautoparts (catalog number AG5099, price from 220 rubles);
- Ashiika (catalog number 21TY-TY2, price from 220 rubles);
- BIGFilter (catalog number GB9859, price from 220 rubles);
- Denkerman (catalog number M110060, price from 220 rubles);
- AMCFilters (catalog number TC1006, price from 310 rubles);
- Amd (catalog number AMD-JFC111, price from 310 rubles);
- BluePrint (catalog number ADT32505, price from 310 rubles);
- Champion (catalog number CCF0123, price from 320 rubles);
- Jakoparts (catalog number J1342001, price from 320 rubles);
- JapanParts (catalog number FAA-TY2, price from 320 rubles);
- JcPremium (catalog number B42002CPR, price from 330 rubles);
- Asakashi (catalog number AC101J, price from 330 rubles);
- Meyle (catalog number 30-12-3190001, price from 330 rubles);
- Nipparts (catalog number J1342001, price from 340 rubles);
- Four (catalog number QF20Q00002, cost from 340 rubles);
- SCT (catalog number SA1209, cost from 350 rubles);
- Starline (catalog number SF / KF9198, price from 350 rubles);
- Tamok (catalog number F406101, price from 350 rubles).
We also provide a list of coal SF:
- Alco (catalog number MS6188, price from 400 rubles);
- Delphi (catalog number TSP0325173, price from 400 rubles);
- Denso (catalog number DCF357P, price from 400 rubles);
- Filtron (catalog number AP142/1, price from 400 rubles);
- Fortech (catalog number FS-070, cost from 400 rubles);
- Fram (catalog number CF9466, cost from 400 rubles);
- Goodwill (catalog number AG162CFC, price from 450 rubles);
- InterpartsFilter (catalog number IPCA107, cost from 400 rubles);
- Kolbenschmidt (catalog number 50013944, price from 400 rubles);
- Kortex (catalog number KC0014S, cost from 400 rubles);
- Cartridge (catalog number PF2095, cost from 400 rubles);
- Profit (catalog number 1521/2144, cost from 400 rubles);
- Bosch (catalog number 1987 432084, price from 500 rubles);
- LYNXAuto (catalog number LAC-105, price from 500 rubles);
- Knecht (catalog number LA 109, price from 500 rubles);
- Mapco (catalog number 65550, price from 500 rubles);
- Mann (catalog number CU1828, price from 550 rubles);
- Nac (catalog number 77190CH, price from 550 rubles);
- Febi (catalog number 24433, price from 700 rubles);
- Micro (catalog number RCF1801B, price from 700 rubles);
- Avantech (catalog number CFC0108, price from 1000 rubles);
- Corteco (catalog number 80000419, price from 1000 rubles).
When replacing the cabin filter on a Toyota Corolla 2008 and other model years, it is advisable to pay attention to its dimensions: they may differ depending on the year of manufacture, the number of power units and its volume. In total, filters of the following sizes (length / width / thickness) are suitable for Corolla, starting from the eighth generation:
- 0x219.5×20.5;
- 0x215.0x19.0;
- 0x221.0x20.0;
- 0x217.0x16.0.
You can find out the size of your SF by referring to the owner's manual or by measuring it after disassembly.
Criterias of choice
The filter must be the correct size for the car's socket. Dimensions may vary slightly depending on the year of manufacture and manufacturer. If a parameter mismatch is detected, the element cannot be installed. Standard options are suitable for Toyota Corolla, marked with article number 87139-YZZ07. Coal models mounted on this vehicle are designated No. 88568-52010.
Pros of a carbon filter
Carbon models have a layer of activated carbon. It blocks not only dust particles, but also vapors:
- sulfur dioxide;
- benzene;
- ozone;
- carbon monoxide, etc.
The carbon version is capable of trapping many harmful compounds that make up exhaust gases, as well as trapping unpleasant odors. It is believed that pathogenic microorganisms cannot multiply in it.