Which brake discs for Lada Vesta, XRAY, Largus are better to choose

12 February 2020 Lada.Online 99 876 7
Checking the condition of brake discs refers to control and inspection (diagnostic) work that is carried out at each scheduled maintenance. When the thickness of the brake discs becomes less than acceptable, or the wear is uneven, the discs are replaced with new ones. Let's figure out which brake discs are best to buy for Vesta, Largus and XRAY.

Top 5. TRW GDB3332

Original products are used to complete the Lada Vesta on the automaker's assembly line.

The use of TRW GDB3332 linings for the Lada Vesta brake system allows car owners to achieve greater efficiency from its operation in urban driving conditions. The choice of the manufacturer also speaks in their favor - along with pads of other brands, TRW is included in the number of factory components. Frequent braking and heating do not affect the performance of the friction material. Replacing consumables on the front and rear calipers (the latter is possible in premium configurations with disc systems on the rear axle) in some cases causes conflicting reviews. This largely depends on the originality of the product, as well as the plant. Pads produced in China for the Asian market can squeak and reduce their performance when overheated.

Source

Causes of Brake Wear

According to modern rules for monitoring the technical condition of vehicles, disc brake pads must be changed once every 10,000 kilometers. But this figure cannot be a single standard for everyone, since the wear of consumables greatly depends on driving style.

If you brake smoothly and not often (the mileage is mainly on the highway), then you can change the pads after 20,000 kilometers. On the contrary, if you brake frequently and sharply (aggressive driving style in the city), then the pads may wear off after 5,000 kilometers.

An important factor is the quality characteristics of the pads themselves. Some manufacturers openly save on raw materials. The same manufacturer may have several models of pads - more expensive and cheaper, softer and harder.

Everyone is different, so it is important to check your brake wear from time to time.

Front brake discs

Tuning center Dop Shop brings to your attention ATC brake discs. These are Russian wheels that are produced in our country and are a worthy alternative to BREMBO wheels.

The ATS company has developed a special version of the ATS-SPORT, on the working surface of which holes and grooves are applied, providing additional cooling and serving as indicators of wear on the working surface of the brake disc.

For many years, owners of LADA cars have been using wheels from this manufacturer, and recently they appeared on Lada Vesta and Lada XRAY. There are also these for Lada Granta, Kalina, Niva, etc.

You can buy these discs in St. Petersburg without overpayments for delivery. Link to the product.

Brake discs for VAZ (Lada) Vesta

for repair of VAZ (Lada) Vesta

I replaced the brake discs with ATE discs with HI-Q pads, the result: after 1000 km, as soon as it got below +5 they whistled (you could really start dancing).

The new Brembo Max wheels started squeaking after about 1000 km.

Stock brakes are crap from a Nissan Micra. The brake discs are 40,000 km old and are in the trash. 1mm wear on each side.

The front brake pads are 60% worn, and when replacing them I will also change the discs. The wheels could have been supplied better from the factory!

I took Zimmerman wheels 470241620, quite a good option.

I installed Galfer wheels and nibk pads. Everything is fine.

Replace discs and pads today. I came and talked and discussed everything for 20 minutes. I've already driven about 50 km, the brakes are good, but they haven't gotten used to it yet, you can feel it, well, nothing, judging by the silence in the cabin, everything will be fine.

I definitely recommend installation!

I changed the brake discs and pads in pairs. I drove 14 thousand kilometers on them. Changed it in the summer. What can I say, the brakes are clear, the car brakes well, there is no runout, during this time they have never squeaked, and there are no extraneous noises either.

Causes of Brake Wear

According to modern rules for monitoring the technical condition of vehicles, disc brake pads must be changed once every 10,000 kilometers. But this figure cannot be a single standard for everyone, since the wear of consumables greatly depends on driving style.

If you brake smoothly and not often (the mileage is mainly on the highway), then you can change the pads after 20,000 kilometers. On the contrary, if you brake frequently and sharply (aggressive driving style in the city), then the pads may wear off after 5,000 kilometers.

An important factor is the quality characteristics of the pads themselves. Some manufacturers openly save on raw materials. The same manufacturer may have several models of pads - more expensive and cheaper, softer and harder.

Everyone is different, so it is important to check your brake wear from time to time.

Front brake discs

Despite the fact that on the SV Cross version the wheels are installed with a larger diameter than on the sedan or SV, according to the catalogues, the wheels have the same number.

First, let's get acquainted with the parameters of the front brake discs; they are especially relevant when selecting analogues, since the specified compatibility is not always accurate; some discs may either not be suitable or need some modification. Therefore, it would be a good idea to compare the parameters in the catalog when ordering, or on the packaging when purchasing.

Disk optionMeaning
TypeVentilated
Thickness22
Minimum thickness19.8
External diameter258
D location of mounting holes100
Number of mounting holes4
Bolt pattern100*4
D centering61
Height44
D mounting holes13.5

Original

The original spare part has article number 8450031577 . Users are accustomed to the fact that brake discs are usually sold in pairs, however, in this case, most often you can find them on sale individually. One original brake disc on the front axle will cost approximately 4 thousand rubles.

Analogs

Analogues are installed for three reasons: when it is not possible to purchase the original, when you want to save money, or if you want to purchase discs with greater efficiency and an increased resource. Among analogues, users note the following options; they are shown in the table.

Namevendor codeEstimated cost per pair (rubles)
Renault77012077957000
Swag609241654000
NFNF16991313000

Reviews

Delivery of goods is carried out throughout Russia and the CIS:

1. Russian Post (from 350 rubles and above)

Delivery to all regions of the Russian Federation and CIS countries

2. Transport Companies (from 350 rubles and above)

Delivery throughout Russia and the Republic of Kazakhstan

  • TK Energy (nrg-tk.ru)
  • TC Business Lines (dellin.ru)
  • TC SDEK (www.cdek.ru)
  • TK PEK (pecom.ru)
  • TK KIT (tk-kit.ru)

3. Pickup

The order can be picked up at the office at Tolyatti, 40 Let Pobedy 38, TD “Malachite”, 1st floor.

The waiting time for sending an order in our online store is approximately 2-7 working days, large orders 7-14 working days. days; color of bumpers, mirrors, body parts, spoilers, etc. 7-14 work. days; sewing covers, upholstery, steering wheels, gear knobs, EVA mats, etc. 7-14 work. days.

During this period, we will send you a tracking number by email. email to track the parcel en route.

Payment can be made in the following ways:

1. Payment to a Sberbank card

You can pay using the SBERBANK-Online application and other Bank applications.

After placing an order, making payment, do not indicate comments , we ourselves will understand by the amount of the order and the name of the sender. After receiving the funds, the status of your order will be changed to paid until 17.00 of the current day, or from 9.00 of the next Moscow time.

2. By bank card

Automatic acceptance of payments using MIR Bank cards, VISA International, Mastercard.

You can also pay with credit cards with a grace period.

To select payment for goods using a bank card, on the corresponding page you must click the “Pay for order by bank card” button.

2. Payment to QIWI wallet 89272115207

3. Payment on Yandex.Money 410013993950891

5. Payment to a bank account for legal entities and individual entrepreneurs (commission 6%)

Send your organization's details to [email protected] for invoicing. After paying the bill, be sure to send a payment order.

4. Cash on delivery of Russian Post (commission from 4%)

IMPORTANT! When sending by cash on delivery, RUSSIAN POST will take a commission for providing the cash on delivery service of 150-300 rubles, and the delivery cost also increases due to the evaluation of the goods.

Cash on delivery delivery is possible only within Russia.

ATTENTION! When choosing cash on delivery, the delivery cost is paid in advance before shipment, for the product itself upon receipt.

The amount of the order by cash on delivery should not exceed 5000 rubles; also, painted parts, goods made to order, covers, upholstery, door inserts, EVA mats, steering wheels, etc. are not sent by cash on delivery. (minimum 50% prepayment).

Be sure to save the payment receipt or a screenshot of the transfer.

The best guarantee of order fulfillment and quality is the feedback from our customers.

Rear brake discs

The table below shows the parameters of the rear disk.

Disk optionMeaning
TypeHollow
Thickness11
Minimum thickness9
External diameter260
D location of mounting holes100
Number of mounting holes4
Bolt pattern100*4
D centering66
Height45.7
D mounting holes13

Original

The original rear brake discs have part number 8450031131 . Discs are also sold individually rather than in pairs. They cost less than the front one and will cost about 3-3.5 thousand rubles per disc.

Analogs

The table shows analogs of disks that users most often respond positively to, and they also cost much less than the original.

Namevendor codeEstimated cost per pair (rubles)
Valeo2977642000
Jurid561997 jc2000
N.K.2022641500

Most owners of these cars note that it is best to use original discs, as they cause fewer problems and work efficiently.

Replacement procedure

Briefly described, the procedure for replacing the front disc is as follows:

The rear brake disc can be changed in almost the same way, however, you will need a special device to remove the disc from the hub. Its operating principle is simple - the center of the device rests on the axis, and the remaining one exerts pressure on the disk.

You should pay very close attention to the procedure for unscrewing the disk mounting bolt to the hub; it is better to use WD40 to ensure that nothing is damaged. After removal, a new disc is put on and assembly is carried out in the opposite sequence.

Brake discs and drums Lada Largus FL 2021

Lada Granta brake discs: originals and best analogues

Brake pads Lada XRAY: front, rear

Which brake discs to choose for Lada Vesta

The automaker and dealers recommend changing brake discs at approximately 60,000-80,000 kilometers. Sometimes they can wear out sooner or a little later. It depends on the quality of the parts, the condition of the brake pads, driving style and some other factors.

Replacing the front discs is necessary when their thickness is 19.8 mm, which is critical. The rear ones, if they have a disc system, are replaced when worn down to 9 mm. But it is better to replace parts a little earlier, without reaching the limit values.

When choosing products, it is advisable to know their parameters. For front discs they are:

Related Posts

What tires and wheels are suitable for Niva Travel

Lada X-Ray dashboard: the realities of a budget car

Rear characteristics :

Before replacing, many motorists think about which brake discs to buy. At the same time, most dealers and AvtoVAZ itself advise installing original products. Experienced car owners often share the same opinion.

These parts were developed specifically for Lada cars and Russian conditions. They have gone through many tests. Products are made using modern equipment from cast iron of the highest quality.

Thanks to this, they should not become deformed after overheating or sudden braking. But in practice, sometimes you come across defective spare parts from Avtoreal LLC, which are also installed at the factory. Some car owners note their excessively rapid wear and the appearance of squeaking when braking.

The article number of the original front discs is 8450031577. They are usually sold one piece at a time. The cost of the kit is about 4500-5000 rubles.

The rear discs have article number 8450031131. The cost of a pair will be about 4,000 rubles.

By the way, the Vesta SV Cross or SV uses the same brake discs as the sedan.

As an alternative to factory products, many sports driving enthusiasts often purchase BREMBO brand products. The article number for the front discs is 09907875. The kit costs about 10,000 rubles. The parts are considered reliable, more durable than the originals and wear-resistant.

They can withstand extreme loads better. But this opinion is controversial, since spare parts with such characteristics are not needed for normal operation. And their durability is not so high for the money. In addition, there are many low-quality fakes on the market. Therefore, if you buy them, do so in trusted places and do not buy them at a suspiciously low price.

Renault front wheels with article number 7701207795 are perfect for Vesta. The set costs about 7,000 rubles. It is believed that they wear out somewhat slower than the original ones. In addition, the percentage of defects is not so high.

ATE front discs (article number - 24012202701) cost about 8,000 rubles as a set. They are of good quality, but in no way superior to the original ones. Therefore, it makes no sense to overpay for them. The same can be said about ATS-SPORT products.

Owners often buy Swag products (catalog number 60924165). You will have to pay about 4,000 rubles for the set. German spare parts are quite high quality. They do not creak, but can sometimes rust and cause beating. But perhaps their increased wear is associated with the driving style of individual motorists. Also, fakes are not excluded on the market.

Thrifty car enthusiasts choose NF spare parts with catalog number NF1699131. A set of disks will cost approximately 2,500 rubles. They attract attention because they are cheap. But the quality often leaves much to be desired. At the same time, some motorists claim that such products serve well.

Original or analogue?

This is what AVTOVAZ writes about the original LADA brake discs.

Original brake discs meet high LADA standards and guarantee quality, for this:

  • Each batch of brake discs undergoes random inspection and checks of the metal structure using special equipment, excluding porosity and other casting defects
  • The disc is made from high-quality cast iron, which guarantees no warping effect during sudden braking or overheating.
  • Brake discs undergo high-precision processing to ensure the absence of runout and imbalance
  • All original LADA spare parts undergo numerous tests confirming the reliability and quality of each part.

Where can I buy

: in our online store (categories Vesta Front Brakes, Vesta Rear Brakes, XRAY Front Brakes, XRAY Rear Brakes, Largus Front Brakes, Largus Rear Brakes).

We invite you to determine the best manufacturer. Take the survey and leave your feedback in the comments.

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]