Brake discs are replaced when their thickness becomes less than permissible (17.8 mm). Replacement is also carried out if they are damaged (cracked), unevenly worn, or when they are a source of runout. Let's figure out which brake discs are best to buy for the Lada Granta, Kalina and Priora family of cars
What front brake discs should be installed on the Lada Granta
The front wheels of the Lada Granta are equipped with disc shoe brakes. What makes the pedal informative is that it makes it easy to calculate where to stop.
ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"
The power reserve with original parts can range from 50 to 120 thousand km. But sooner or later the need for replacement arises.
You can divide all supplied spare parts into two main categories: original and analogues. The former are more expensive. But at the same time, their maximum mileage is usually an order of magnitude greater than their analogues. There is multi-stage quality control in production. The downside is the high cost. Sometimes it is 2-3 times more than analogues.
The latter are distinguished by their availability. But not all parts are reliable. It is best to give preference to well-known brands that have proven themselves on the positive side.
Granta 4 new size
According to the maintenance regulations, we check the condition of the brake system every 15 thousand km.
We carry out the work on an inspection ditch or overpass.
To check the functionality of the vacuum brake booster when the engine is not running, press the brake pedal 5-6 times and, holding it down, start the engine. If the vacuum booster is working properly, after starting the engine the pedal should move slightly forward. If this does not happen or the braking is not effective enough (you have to press the brake pedal with great force), you need to check the tightness of the connections of the vacuum supply hose to the vacuum booster and the serviceability of the booster itself.
We check the condition of the brake pipes. The tubes must be securely fastened in the holders and have no dents, mechanical damage, deep corrosion, or signs of brake fluid leakage. If necessary, we tighten the connecting fittings or replace faulty parts.
Original
The advantage is exact compliance with the specified dimensions. After purchasing the part, there is no need to adjust it to size or grind it down:
| Name | vendor code | Cost per 1 piece, rubles |
| AvtoVAZ | 11180-3501012-10 | From 2 thousand rubles |
Various manufacturers can be the manufacturer of original parts of this type for cars. But the products are labeled as AvtoVAZ. The quality is up to the mark. A special alloy of cast iron is used. It is allowed to use pads whose friction linings include ceramics.
Where can I see the VIN code?
It's not difficult to do.
The code can be found:
- on a plate installed on the central pillar in the lower part near the driver's car seat;
- under the hood;
- on the threshold of a car;
- on the windshield;
- under the spare tire;
- in vehicle documents.
Once the code is detected it can be read. How to do it?
Analogs
The selection of replacements for original parts includes several dozen items. The highest quality and relatively inexpensive are the following:
| Name | vendor code | Cost, per 1 piece, rubles |
| Alnas Sport, ventilated perforated | 2112-3501070-03 | From 1 thousand rubles |
| Notched, “PowerDisc”ATE | 24.0320-0142.1 | From 1.5 thousand rubles |
| BREMBO MAX | 09.8903.75 | From 1.2 thousand rubles |
What rear brake discs can be installed on the Lada Granta
Despite the fact that this car belongs to the budget class and is one of the cheapest among those sold in the Russian Federation, it is equipped with rear disc brakes. Which implies the need to replace individual components. The price of parts depends on their type, as well as other factors.
It is important to remember: the front and rear discs differ in the diameter of the mounting holes and other parameters. Installation can be done by yourself. The process itself is simple. But it requires some preparation. It is important to decide on a budget for parts in advance. All of them are divided into two main categories - analogues and originals. They differ in price and quality.
There are many types of discs. These are ventilated, with notches and various others. If the driver practices an aggressive driving style, then you should opt for ventilated models. They cool faster. They have more resources. The replacement process is no different from the others.
Granta 41 2 new size
If, as a result of wear, a high shoulder has formed on the maximum diameter of the disk, which prevents an accurate measurement, remove the shoulder using a file or other method, or measure the thickness of the disk with a micrometer. We replace a brake disc with defects in the working surfaces or extreme wear.
The degree of wear of the brake pads of the rear wheel is assessed by the condition of the front pad, which wears out faster than the rear one.
What size brake discs are on Grant 13 or 14
Good evening everyone
by Adminrive · Published 01/07/2015
In America, when you stop at a gas station, your gasoline may be pumped out and missed
by Adminrive · Published 08/21/2013
Analogs
The cost of original components is an order of magnitude higher than analogues. Therefore, the choice of many vehicle owners falls on substitutes. The most advantageous offers:
| Name | vendor code | Cost, rubles |
| A.S.P. | 2702220 | 2 thousand rubles. for 1 piece |
| B.M. | BDV 885 | 1 thousand rubles for 1 piece. |
| Hella | 8DD355109331 | 1.6 thousand rubles for 1 piece. |
Replacing front brake discs
The replacement algorithm includes the main steps:
- it is necessary to remove the wheel and jack up the car;
- the old brake pads are removed - to do this, the guide bolts are unscrewed and the caliper is folded back;
- The bracket is carefully hung on the suspension, after which you can begin to remove the disk - two nuts are unscrewed;
- if for some reason the disk cannot be removed from the bolts, you need to lightly hit it with a hammer from the reverse side;
- The new disk is carefully installed.
The nuts are screwed into place. It is advisable to pre-lubricate the threads with graphite lubricant. This will prevent souring. It is advisable to change the pads along with the discs.
Analogues of brake pads for Lada Granta
The products of the German company ATE enjoy the greatest popularity and positive reviews among analogues. These front pads under article number 13.0460-2965.2 work well in tandem with the original brake disc in all operating modes.
In second place in popularity and quality are Lucas/TRW products. Front brake pads with article number GDB 1446 have a built-in electronic wear sensor for vehicles in the Luxury configuration. Their price is slightly higher than that of TRW GDB 469 pads, which are also an analogue for replacement. lower quality M pads available for sale
Prices and articles of other popular analogues are presented in the table:
| Manufacturer | Catalog number | Average price as of 02/05/2018 |
| TSN | 2.1.4 | 320 rub. |
| Allied Nippon | ADB 0173 | 350 rub. |
| Fenox | BP40006O7 | 370 rub. |
| PILENGA | FD-P 2003 | 370 rub. |
| Finwhale | V 218 | 390 rub. |
| PILENGA | FD-P 2005 | 400 rub. |
| Sangsin | SP 1181 | 470 rub. |
| Valeo | 301 406 | 600 rub. |
| NiBK | PN-0223 | 600 rub |
Replacing rear brake discs
The algorithm for replacing rear brake discs is as simple as the front ones. The process is similar. Its main stages:
- it is necessary to remove the wheel to gain access directly to the part - the car is raised on a jack or lift;
- the caliper is removed along with the pads - you can place it side by side or hang it on a spring;
- use an open-end wrench to unscrew two nuts;
- a new disk is installed.
Assembling the caliper, installing the pads - everything is done in the reverse order. It is necessary to ensure that the thickness of the brake disc corresponds to that specified by the manufacturer. If you have difficulty removing the pads, you need to press in the cylinder with a screwdriver. If difficulties arise with unscrewing threaded connections, you need to use WD-40.
Serviceable brake discs affect the driving comfort, vehicle speed and safety. It is necessary to carry out timely inspection and repair of the main components of the brake system.
I’m thinking of changing to 14th ALNAS (with perforations) do I need to change the calipers?
Change the gasket between the steering wheel and the seat
what's wrong?
Uncle is being insolent...listen, it looks like thirteenth ones. I’ll find out from the mechanic the other day exactly which ones. I want to install 14 discs for myself. But maybe I’ll install Volgov calipers, I don’t know yet.
What does this have to do with brake discs? There are rims and tires of different sizes and the manufacturer usually recommends several sizes, but no one changes the brake discs (wheel hubs)
Actually, I’m asking because the 13th and 14th were installed on the two-wheeler at the same time. But on the grant, I don’t know, there’s nothing in the book about this... I don’t really want to take off the wheel to look at it So Why don’t you be smart since you don’t know anything!
Tires Standard sizes 175/70 R13 175/65 R14 Non-standard sizes 186/60 R14 195/50 R15 185/60 R14
Disks PCD 4×98 DIA 58.6 Standard sizes 5.5 x 14 ET35 Non-standard sizes 5.5 x 14 ET38 6 x 15 ET35 6 x 15 ET38
What does this have to do with it? Don't confuse wheels with brakes!
Good luck learning the materiel
But what’s wrong? If the brake discs are 14th then the 13th calipers need to be changed as I was told. Or is this not so?
but don’t worry, some inadequate felt boots are talking nonsense)) I’m also interested in the standard with automatic transmission, what kind of brake discs they cost, I used to think that from 12, but now I doubt something
But what’s wrong? If the brake discs are 14th then the 13th calipers need to be changed as I was told. Or is this not so?
THEY SAID CORRECTLY TO ME IT SEEMES TO BE 13 I LOOKED AT THE PRIOR THE DISTANCE BETWEEN THE CALIPER AND THE DISC IS MUCH SMALLER AND THE WHEELS ARE THE SAME 14
But what’s wrong? If the brake discs are 14th then the 13th calipers need to be changed as I was told. Or is this not so?
along the way, you still didn’t understand what they told you, maybe you’re a noob, you can install any wheels, at least 13, at least 14, at least 15, and with the tires you can customize yourself
along the way, you still didn’t understand what they told you, maybe you’re a noob, you can install any wheels, at least 13, at least 14, at least 15, and with the tires you can customize yourself
Installing R14 brakes instead of R13
According to the data from the table, you can see that to switch from R13 to R14 brake discs, no modifications are required and the cost of modification is low (buy R14 brake discs and fixed caliper brackets).
Don't forget to check that the rims are at least R14 in diameter. We improve the brakes using the familiar instructions for replacing brake discs.
Most car owners, after installing R14 brake discs, feel a noticeable difference when braking and remain satisfied. However, this is not the limit, the brakes can be made even better!
