Instructions for replacing the windshield and rear glass on a Lada Granta

The cost of delivery to Chekhov » » will be rubles.

Delivery cost to Chekhov:

Windshield: rub. Rear window: rub. Side glass: rub.

(Calculations are based on average sizes and weights for windshields, rear windows and side windows. Actual shipping costs for the glass you need may vary slightly. Rigid box packaging and damage insurance are included in the price.)

Unfortunately, we were unable to obtain data on the cost of delivery to the city you specified. Please select from the list of cities the nearest regional/regional/district center to which delivery is possible. Thank you.

Rubble is the most dangerous and unpredictable enemy for a driver on the road. It is impossible to predict from which side it will bounce, especially on a large-tonnage truck. The consequences of contact of crushed stone with the glass surface are very different.

Much depends on the speed at which the “contact” occurred. Over 75 - 80 km/hour is fraught with the risk of getting a crack, the so-called rosette. At lower speeds, only a strong impact is possible. Ultimately, replacing the windshield on a Lada Granta is guaranteed.

Cost and dimensions of front / rear windows of Lada Granta models

Other parameters of Lada Granta:

The measurement is taken along the widest bottom part of the glass, on the outside.

Caution: in data after which a letter designation is indicated in brackets (for example: Upper length (AB)) indicate the size of the glass opening, in all other cases the data refers to the glass dimensions.

Third-party glass manufacturers for Lada Granta. Price category overview

Preparing for replacement

Preparatory work is necessary so that replacing the windshield on a Lada Granta can be done quickly, in one and a half to two hours. Step-by-step instruction:

1. Wash and dry the car.
2. Install on a flat surface, outdoors or in a ventilated garage, the air temperature is not lower than 10 degrees.
3. Remove the negative terminal from the battery.
4. Dismantle the attachments in the cabin, remove the rain sensors, heating, if any, remove the wipers.
5. Remove the wind cap.
6. Unscrew the side panels of the pillar trim. Cover the torpedo with a piece of canvas or paper.
7. Remove the seal from the top of the door.
8. Pull out the molding and rubber seal installed around the perimeter of the windshield.

If the triplex has significant chips and multiple cracks, cover the damaged area on the interior side with tape.

Required tools and materials

When replacing at a car service center, craftsmen use vacuum suction cups to dismantle and install new glass. It is not advisable to buy a tool for a single replacement, so it is better to remove the old part, try it on and install it with a partner. This will save a lot of time.

For gluing, you can take a special kit, which includes the necessary tools, or prepare it yourself; for work you will need:

• sealant;
• primer (optional);
• primer;
• metal string for cutting, you can take a guitar one;
• construction knife with a round edge;
• scotch;
• awl;
• new glass.

What you need to know when choosing glass for the Lada Granta

Original products are always marked with a barcode that stores information about the manufacturer, date, batch number, and standardization.

Basic and mandatory details:

• manufacturer;
• standard;
• batch number;
• in-plant search index.

It is noteworthy that the date of manufacture is indicated in the form of bold black dots in combination with symbols. So, the number “2” and two dots indicate the year of manufacture 2012, the month of December.

Defects requiring replacement

For car windshields on Granta, standard triplex is used, two layers of 2 mm tempered M1 glass are pressed with polyvinyl butyral (PVB) film, the minimum thickness of the windshield is 4 mm. When hit by a stone that flies out from under the wheels of the vehicle in front at a speed of more than 80 km/h, a deep chip is formed, and cracks spread throughout the area due to vibration. If such damage occurs, the part must be replaced. Replacement will also be required in other cases where there is no direct impact of gravel. These include:

1. Significant wear on the windshield, reducing visibility by more than 15%.
2. A crack that goes from edge to edge. Appears if there is a violation of the geometry due to body deformation.
3. Deep scratches that cannot be repaired, polished or varnished.

Original windshields are installed at the manufacturer's factory, and the part is marked with a barcode with information about the brand, production date, batch number, etc. When choosing a replica, it is recommended to give preference to products from trusted brands.

According to the rules, each manufacturer can put its marking in any place, most often it is the lower right or upper corner on the passenger side.

Glass selection

In addition to the SLGLASS company, licensed Lada Granta glass is produced by the following manufacturers:

1. Bor (RF);
2. BENSON (PRC) – for models after 2011, a rain sensor is provided;
3. SAT;
4. AGC.

When choosing a windshield from manufacturers of licensed replicas, you need to pay attention to the clarity of the silk-screen printing, the presence of a window for the VIN code, the transparency of the glass and cleanliness. The manufacturer labels products not according to GOST, but according to accepted international labeling standards. Glass number in the catalog for various configurations of the Lada Granta:

1. VAZ 2190 - 2190-5206016-05, size 1405x959 mm.
2. Lada Granta liftback, sedan - 2190 SED 4D 2 2011.
3. VAZ Granata 2190 5D HB 2013 - number for five-door hatchbacks.

The dimensions of the windshield are the same for all Grant models; the “Lux” configuration option includes the installation of heated windshield around the perimeter and in the area of ​​the wipers, and the presence of a rain sensor. The cost of a replica with additional equipment is from 3,500 rubles. The average price of an original windshield for August 2022 is 2,400 rubles.

The process of replacing a part is not complicated or expensive; reinstallation can be done independently, with a minimum of equipment. Replacing windshields on all VAZ Granta models is carried out similarly, according to a template.

Sequence of actions when replacing glass on a Lada Granta yourself

Windshield

Before replacing, always carry out diagnostics to identify the breakdown, defect, location. So that during the installation process “hidden” breakdowns are not discovered. The accuracy of the calculation will allow you to avoid unnecessary expenses and the purchase of “unnecessary” spare parts and components.

Tools: soil, based on 50 ml. for one windshield/rear window. For side doses, the dose is divided by half. Next, we prepare the string, which is the name of the special device for cutting the seal. You can buy it either at a car dealership or make it yourself: two screwdrivers, between which a string is stretched, a wire with a cross-section of 0.1 cm.

Algorithm

• We install the machine within the perimeter of the repair area, on a flat platform / inspection channel. There is no need to hang it with a hydraulic lift;
• squeeze the handbrake, engage first gear, open the hood;
• Use a Phillips screwdriver to unscrew the two bolts on the decorative plastic overlays in the frill area.

We extract them;

• remove the standard glass stops, external glass seal Lada Granta liftback (sedan);
• in the cabin we remove the front upper trim, rear-view mirror, antenna transmitter, and other equipment installed on the glass;
• in the upper part, carefully pry up the rubber moldings - seals;
• Use a string to cut the rubber layer between the glass and the body, remove the glass using special vacuum suction cups;
• We clean the surface from any remaining rubber coating. For these purposes we use a scalpel, a stationery knife;
• degrease the new glass, apply primer and special glue along the edge;
• the landing site on the hull is also subject to primer treatment;
• Together with a partner, we apply glass, align the gaps on each side, install stops;
• wait 15 - 20 minutes for the glue to set, put on moldings, decorative inserts, windshield wipers;
• In the cabin we complete the installation, fix the rear view mirror and antenna transmitter.

Removing old glass

Car dealerships always replace the seal. When making repairs yourself, you need to check the part and if there are no creases or stretch marks, then the elastic band can be reused. Dismantling old glass in stages:

1. Make a through hole in the sealant in the side of the windshield with an awl.
2. Stretch the string.
3. Tilt the string towards the glass and forcefully cut out the part around the perimeter.
4. If there is a danger of damaging the paintwork because the string is crooked, it is better to cover the frame with tape.
5. Pull out the windshield.

Owner reviews about glass quality

Post-installation recommendations

Even when replacing it at a service center, the technicians allow the car to “settle” for at least 2 hours and only then allow the vehicle to be used in a gentle manner.

1. The maximum speed for the first two days is no more than 40 km/h.
2. Avoid bad roads; Drive over potholes, potholes, and speed bumps at minimum speed.
3. You cannot brake or accelerate sharply.
4. It is not recommended to slam doors or play loud music.

After self-installation, it is not recommended to start the engine until 8 hours; you can remove the tape only after 36 hours. It is better to leave the side windows open.

Services for replacement and repair of auto glass for VAZ GRANTA 2190 4D 12-

Our company can offer you the most profitable purchase of auto glass for the VAZ GRANTA 2190 4D 12- (LADA-VAZ GRANTA 2190 4D 12-) with heating and rain sensor, install it on your car with high quality and in the shortest possible time. We provide a 2-year guarantee for the work performed related to the replacement of glass with new glass. Our company has been selling auto glass for cars for more than 16 years, during which time we opened 12 service centers and became official distributors of a number of windshield manufacturers. VAZ GRANTA 2190 4D 12 was produced from 2012 to 3000 and from us you can buy auto glass for any year of manufacture and with any options and modifications.

Installation process

Before installation, you need to prepare new glass:

1. Apply a layer of primer around the perimeter and wait 10 minutes.
2. Treat with primer and let dry for 10-15 minutes.
3. Apply a layer of glue 10 mm thick and 10-12 mm high along the edge of the glass. Make sure that the sealant strip is not interrupted.
4. After 15 minutes, apply the windshield to the frame, pressing lightly so that the sealant does not come out too much over the edge.
5. Install molding.
6. Secure the part with tape.
7. Cut off the remaining sealant with a knife.

The sealant dries in 24-36 hours. It is recommended to check the glued areas for leaks after the glue has completely dried. It is necessary to close the doors and pour water onto the front bucket, then carefully look inside the cabin to see if there are any leaks. If a defect is found, wait until the part dries, bend the rubber band and re-glue the leaky joint.

It is recommended to install attachments: mirrors, rain/light sensors, heating after all checks and the sealant has completely dried.