How to make a cool tuning of a Lada Priora with your own hands

The first Lada Priora rolled off the assembly line in 2007. A couple of years later, this car became very popular among domestic car enthusiasts, mainly because of its affordable price. At the same time, many car owners strive to give their Priora individuality. Make it look more solid and more expensive. Tuning helps them with this. Let's figure out what this procedure is.

• Chassis
• Improved appearance
• Interior tuning

  Video: painting the interior of the Priora black

Lighting system

Trunk

Photo gallery: tuned Priors

Interior tuning of Lada Priora sedan in the photo: main directions

Many motorists already have an idea of ​​how to organize the modernization of the chassis or power plant. For example, some owners successfully installed daytime running lights on the VAZ-2170, which increased not only the level of exterior appearance, but also safety.

There are many opinions regarding interior design. Some particularly “spiritualized” individuals manage to change their internal environment beyond recognition. Such Priora and do-it-yourself interior tuning in the photo look, in their opinion, like the dream of an Arab sheikh. However, there are quite reasonable options, including:

1. Replacement of covers and trim.
2. Modernization of seats and dashboard.
3. Acoustic noise insulation and installation of a powerful audio system.
4. Interior lighting tuning and painting of standard plastic elements.

When looking through the options, we must not forget that even for a substantial amount of money, the VAZ environment cannot turn into a Mercedes one. Therefore, you should plan modernization without much fanaticism; do everything modestly, but with taste.

Options for upgrading the VAZ-2170 dashboard

The dashboard of the Lada Priora sedan and the tuning in the photo looks quite decent, and even moreover, it is justified, since the factory lighting of the devices is not enough for many. There are several implementation options:

• Disassemble the panel and remove the standard coating from the lining numbers. After this, the signs on the shield will acquire a bright white glow.
• Stick red or any other inserts on the back of the glass for certain numbers. This focuses attention on the temperature scale and speedometer.
• Attach pieces of LED strip of certain sizes to the back side of the glass on the dashboard board. It is important to observe polarity when connecting the circuit to standard wiring.

What else can be done? VAZ 2170 owners can only dream of a full-fledged HUD projection screen , but something can be done. If you don’t like the green color of the display, you should disassemble it and remove the filter. This will make the backlight bright white, but you can install any other filter.

Some fans of tuning, at the same time as the general illumination of the instruments, also change the illumination of the speedometer needle. To implement this project, 10 SMD LEDs are sufficient: four to illuminate the tachometer and speedometer, and three each for the fuel consumption and coolant temperature scales.

How to soundproof the interior ceiling?

Another useful upgrade, because the acoustic comfort of the VAZ-2170 leaves much to be desired. High-quality sound insulation on the Lada Priora in the form of tuning the interior with your own hands may not be visible in the photo, so we will consider the issue in more detail. Craftsmen recommend starting from the ceiling; for work you will need 4-5 hours of free time and materials:

• Two sheets of splen 1.20 x 1.0 m, 4 mm thick.
• Two sheets of bitoplast.
• Three sheets of vibration damper.
• Mounting roller.
• Stationery knife and scissors.

The procedure begins with the dismantling of the ceiling cladding and standard sound insulation, after which the roof surface is degreased and vibrating material is laid as the first layer. The second stage is the installation of splen sheets, and only then – laying the bitoplast. The convenience lies in the fact that the sheets of material have an adhesive base, which needs to be heated with a hair dryer and “rolled out” with a roller.

Soundproofing the glove compartment and doors would be a good idea. The materials you will need are the same as for working with the ceiling; the technology is simple and quite accessible to anyone. It should be noted not only the improvement in acoustic comfort, but also the thermal insulation characteristics of the car.

Refinement of the interior lamp

Almost all available reviews from Lada Priora owners indicate that the standard navigation lamp does not provide good interior illumination. There are several practice-tested methods:

• Installation of a self-made platform according to the size of the lampshade, onto which the LED strip is glued. The wires are connected to the standard wiring.
• Replacing the stock ceiling lamp with an LED one.
• Replacing the standard lamp of a lamp with a module of LEDs, the brightness depends on the type and number of light elements in the block.

The last two tuning options for the domestic Lada Priora sedan are not noticeable in the photo, but this does not mean that they are ineffective. Modernization is simple, since you do not need to completely remove the lampshade, and does not require special devices and tools.

Upgrading seats

It is possible to radically transform the interior at minimal cost by changing car covers, which are sold in huge quantities. Leather products will cost a little more, but whether they make sense is up to the owner to decide. An alternative can be eco-leather, which has good breathability.

Appearance

Currently, tuning for VAZ cars has a wide range of choices. Since Russian-made cars are quite inexpensive, this attracts their buyers. Tuning for Lada cars is also available and can be found in almost any city.

Tinted glass

To give your car a beautiful appearance, the first step is to tint it. Car tinting is relatively inexpensive, ranging from 2,000 to 3,000 rubles. But after tinting, your car will shine with new colors. It is legally possible to tint car windows only from the rear. Since the light transmittance of the film is not so high, viewing in the evening will be difficult.

Lip installation

To give the car a stylish look, you can install a lip on the front instead of the standard fangs under the bumper. There are several types of lips. The rubber lip “Samurai” and the plastic lip from the Chevrolet Cruze fit perfectly on the Priora bumper. The lip should be secured under the bumper with self-tapping screws. The price of the lip is from 500 to 1000 rubles.

Guba Cruz Guba Samurai

Lipspoiler

In the days of the nines, when our fathers raised the rear of the car by installing spacers under the rear shock absorbers and installing huge spoilers like in Need For Speed. Nowadays, it is stylish to lower a car; by the way, you can read how to properly lower a car on our website, and install a small spoiler that is glued to double-sided tape. The price of such a spoiler varies within 1000 rubles.

Alloy wheels

Everyone knows that the wheels of a car are the floor of the car, so the wheels of your car should be beautiful and you like them. On the Lada Priora you can install wheels with a radius ranging from R14 to R17. When installing R16 and R17 wheels, you will have to buy low-profile tires, which is very expensive and not practical, but at least beautiful. When installing disks with a large radius, comfort is lost and the chassis begins to work rougher since the rubber does not “eat up” minor road irregularities.

It is best to install R14 and R15 wheels. Such wheels are relatively inexpensive and the tires for such a radius are high profile. It follows that the comfort of driving a car will not be lost.

SE caps and mirror repeaters

In order to give your car a little luxury, you can install turn signal indicators in the prior mirrors and turn signal plugs in the wings on the SE. This modification is relatively expensive, but it significantly changes the appearance of the car and gives it a certain “richness”.

Sabers and bars

This is an amateur modification and is most often suitable for cars with a dark body color. The rear chrome-plated trunk saber and the front chrome-plated hood saber are painted matte black. This modification is very cheap and simple, but it has its own zest and is relevant when the chrome on sabers begins to swell, which is very common on Priors.

Antishildik

This modification consists of removing all nameplates from the car, but it also falls under the category of amateurs. Some car enthusiasts like their cars to look like they came from the factory. The nameplates must be removed using a hairdryer; they are glued with double-sided tape. After removing the nameplate, the remaining tape must be removed with gasoline or solvent.

Do-it-yourself technical tuning of the Lada Priora car interior and photos of implemented options

A large field for experiments in the field of individual auto tuning is provided by RGB strips complete with drivers. The bright footlights for the front passenger and driver look good. Due to the control driver, the lighting intensity and color are adjusted. Is there any rational grain in this revision? Without fanaticism, such illumination will help you get out in the dark, but otherwise...

Audio tuning VAZ-2170

The standard VAZ audio system, as our audiophiles assure, does not meet high sound standards. Seriously, this is the case, and it would be nice to increase the diameter and install branded speakers by 16 cm. In some photos of tuning the interior of a Priora car with your own hands, you can see that the seat for the speakers in the doors will have to be cut. It is imperative to perform noise and vibration insulation of the door walls to avoid resonance phenomena in the future.

In addition to wideband speakers, experts also recommend installing tweeters. They are located on the dashboard or at the top of the door card. Broadband speakers are also installed for rear passengers, and to emphasize low frequencies, space for a subwoofer can be arranged in the luggage compartment.

Other technical options

If you are going to start upgrading your audio system, then it is advisable to turn your attention to some kind of full-fledged multimedia center with monitor outputs. This will already be a guarantee of high-quality playback of music tracks.

To all that has been said, it’s a good idea to add a good monitor that will not let you get bored in traffic jams and will allow you to relax in the parking lot during long trips. It wouldn't hurt to take a closer look at the range of on-board computers for Lada Priora.

Updating the appearance

How to do tuning of the instrument panel of a VAZ-2107 with your own hands
The field for tuning in relation to this model is quite voluminous. The car is subject to both external and internal tuning.

In terms of external tuning, the following is most often installed in a car:

• Wheels of increased diameter and a different pattern. The manufacturer has provided the possibility of installing larger disks (up to 16 inches). Most often, the owner improves the car by purchasing light alloy wheels - their cost is quite affordable, and the choice of wheel designs is huge. Forged wheels are less common, since the number of patterns is limited, and the price is almost twice that of alloy wheels;
• Installation of additional linings, spoilers, bumpers for the car. Many auto component manufacturers produce special kits for external tuning of the Priora hatchback. The average cost of a complete set is about 15,000 rubles;
• Installation of new optics. To radically change the appearance, owners install bi-xenon units and change the color of the reflectors;

In the photo, tuning Priors hatchback:

Some car enthusiasts change the headlight units to LED ones and tint the taillights. All of the tuning examples given are suitable for both black and white cars, however, to achieve the best effect, the color scheme of innovations (spoiler, bumper, wheel color) must be in harmony with the body color.

In the video - tuning the interior of a Priora hatchback:

But the information from the article will help you understand what reviews about chip tuning Lada Vesta currently exist.

It will also be interesting to learn about what kind of tuning you can do with your own hands for a Lada Granta car in a liftback body.

Hinged roof rack

For lovers of outdoor activities and avid summer residents, a hinged roof rack will be of great help in completing their tasks. There are many models available for purchase, both from famous manufacturers and low-quality Chinese products.

Hanging roof racks are divided into several types:

Products from heaven. The most budget option (2000 rubles), a universal trunk. Installed using cross bars. The workmanship and durability leave much to be desired (although there are exceptions). The load capacity does not exceed 60 kg, and installation often involves fine-tuning the part for the car;

High quality Chinese products. The cost starts from 3500 rubles. Unlike their cheap counterparts, they are made of higher quality material, in compliance with production technology. Their load capacity reaches 75-80 kg, and installation is simple and convenient;

Expensive luggage racks from famous manufacturers. They are distinguished by their high cost (from 7,000 rubles), excellent quality and ease of installation. The maximum load capacity reaches 100 kg.

Installation of the hanging roof rack is simple and not particularly difficult.

You can do everything yourself:

• Cross bars are installed on the roof of the car.
• Using special fastening devices on the arches, they are securely attached to the body.
• Then the roof rack itself is installed on top. Typically, the arch mounts are locked with a locking device to prevent theft.

On video tuning Lada Priora hatchback:

https://youtube.com/watch?v=_V3_80T7L_M

Body kits

Installing body kits for this model is a common method of external tuning. Installation of body kits will require the owner to have a simple set of tools - a screwdriver, a meter, a level, a drill with a set of drills, double-sided tape, and degreaser.

On video 3D tuning of Lada Priora hatchback:

But how tuning the interior of a Lada Kalina is done, and what you can do with your own hands, is described in great detail in this article.

It will also be interesting to learn more about how tuning a Kalina sedan car is done with your own hands.

The installation process of body kits occurs in several stages:

• First, you need to try on the part at the installation site (side body kit - trim) and mark the attachment points to the body;
• Then the place of contact with the body must be degreased;
• Using a drill, make additional holes (if molding is being mounted, using double-sided tape will suffice);
• Using self-tapping screws, secure the new part to the body.
• When installing the bumper, it is necessary to dismantle the factory part and if all the holes match the tuning one, then install the new one on the standard mounts.

Decor of plastic components

The sedan is equipped with a lot of plastic parts in the interior; fortunately, many of them have light colors and can be easily repainted. The process of painting plastic from an aerosol can requires not only a respirator and gloves, but also a degreasing liquid and a primer. During operation, it is important to prevent the formation of drips.

Another way to improve the appearance of plastic elements is to cover them with carbon film. According to many car enthusiasts, this material is durable and looks impressive. The blanks are cut with a margin of 20-25 mm at the edges, after which the film is glued to a degreased surface. Edges and curves are blow-dried to prevent kinks and kinks.

The inexpensive Russian Lada Priora sedan has replaced the generation of the famous VAZ “nines”. Its updated design appealed to admirers of the domestic automobile industry, but still tuning the interior of cars of this class of VAZ models is necessary.

Refinement of doors

Adjusting the headlights of a Lada Priora with your own hands: video instructions

To add brightness and uniqueness to the Lada Priora, some fans cover the doors, and specifically the handles, with Diamond Chip vinyl film. This material is durable and shiny, which is especially noticeable in the sun.

To cover interior elements with diamond chips, you need to outline and cut out the required piece of material. Glue it using Moment glue. Carefully smooth it out with your fingers, working through each protrusion.

As a result, the appearance of the tuned interior will change under the influence of sunlight. On a cloudy day, diamond chips look like an ordinary matte surface, but on sunny days they will shimmer with light and light up with a million lights.

Tuning the Lada dashboard

Changed panel backlight color

Changes to the instrument panel will be the least noticeable visually, but will greatly help the driver set the buttons in the position in which he is comfortable. Doing this manually is quite problematic and extremely difficult without special skills. Therefore, it is better to order new panels in the store. What even a beginner can do is install LEDs.

Norma

A richer version, such a car will cost 417 thousand and include the following:

• Engine 1.6 liters with a power of 106 hp.
• Five-speed manual transmission.
• The driver will be protected by one airbag.
• The rear seats will have two headrests.
• The rear row has an ISOFIX system for installing child seats.
• The car already has an immobilizer installed.
• A modern alarm system is provided.
• Running lights for daytime use.
• ABS, BAS, EBD.
• The engine is protected from below by a solid steel sheet.
• The instrument panel includes an on-board computer.
• There is an armrest for rear passengers, and between the front seats there is a container for storing small items.
• The rear seats can be folded down.
• The passenger visor has a mirror.
• There is a 12 V socket in the cabin.
• There is a case for storing glasses for the driver.
• The steering rack and seat belts are adjustable, and power steering is installed.
• The windows are tinted from the factory.
• Central locking is installed, which can be controlled from the alarm key fob.
• Audio preparation is provided.
• The side mirrors are electrically heated.
• The front door windows are raised by electric windows.
• The wheels are size R14, steel sheets, decorated with caps.
• All door handles will be painted to match the body color.

Lada Priora: new interior to suit your taste

The most noticeable thing in the interior of the Lada Priora is, of course, the seats. Selecting them is very problematic, since the factory models practically do not differ from the basic configuration. Therefore, you just need to improve the existing seats by upholstering them with new material. But it won't last long, especially if you want a leather interior. Therefore, it is better to partially replace the upholstery. For example, make inserts from a material of a different color. The interior of the new Priora driver's seat may have an irregular orthopedic shape. Therefore, it is worth replacing completely. The driver's seat should stand out from the rest of the interior. This will emphasize the importance and solidity of the Lada owner. Leather is best for this. For a sporty style, interior tuning must include the installation of a high racing seat.

For the convenience of passengers during long trips, there are special stands for a variety of items. The standard set includes a hole for a plate, a glass holder, and an additional hole of any shape. If this is available in the front seats, then the creators of the Priora deprived the rear passengers in this regard. Therefore, it is possible to install a mounting board on the front seats.

Eco-leather in the cabin

To separate passenger seats, install an armrest. You can install a cup holder in it. But it’s better not to do this, because in this case the armrest will lose its intended purpose. In addition, if you have a leather interior, the fabric on the armrest will quickly become unusable.

Engine change

The Priora engine provides ample opportunities for tuning. Most often, car enthusiasts bore the cylinder block and install shortened pistons in the engine. Such pistons, in turn, require replacing the crankshaft. As a result, the characteristics of the engine are completely changed, and its power can increase by 35%. But there is a minus: fuel consumption will also increase. Therefore, not all car enthusiasts decide to undertake such radical engine tuning. Many people limit themselves to installing mechanical compressors in the engine, which can increase engine power by 10–15%.

Cylinder boring is one of the most labor-intensive engine tuning options.

Another inexpensive way to increase the dynamic parameters of the Priora is to work with a carburetor. In this device, the jets and acceleration pump are changed (most often, parts manufactured by BOSCH are installed in place of standard spare parts). Then fine adjustment of the fuel level is performed. As a result, the car accelerates twice as fast.

New covers - new seat

The covers are easy to install and at the same time significantly change the interior of the Lada device. Most often, they are used in a new car, so that when later sold, the seat upholstery remains in its original condition. A new cover will easily “update” the atmosphere and can add comfort. The most popular are fur covers. In winter, they warm the driver, and they are also much softer than the standard Priora seat upholstery.

It is not recommended to use bright white covers. After a short time they will become dirty, and it will be very noticeable.

It is also better to refrain from installing leather covers. They do not allow air to pass through well and cause active sweating in the driver. At low temperatures, such covers will “tan” and quickly become unusable. Therefore, the best option is universal covers. They will fit any seat model. You can purchase “station wagons” in almost any store at a relatively affordable price. The disadvantages include the likelihood of wrinkles appearing, which cause discomfort. Therefore, if you want to get maximum comfort, it is better to order a model case from specialists.

Interior

Tuning UAZ 469 with your own hands

There is also a lot that can be changed in the interior space of the cabin. The interior of the Lada Priora is transformed as a result of tuning.

What does interior modernization consist of?

1. Replacing the steering wheel braid with leather;
2. Refinement of the instrument panel;
3. Parts are manufactured according to personal orders or sold in sets;
4. Replacement of door trim components, handles;
5. Replacement of factory plastic on the dashboard, inner surface of the doors;
6. Lada Priora interior reupholstery;
7. Installation of lighting on the inner surface of the doors, in the driver’s and front passenger’s foot areas;
8. Installation of LED strip in the area of ​​the rear row of seats;
9. The seats are covered with covers.

The luggage compartment occupies a special place - it can be equipped with an additional protective floor covering. It is made of plywood and chipboard. Such flooring will perform a protective function and serve as the basis for placing additional acoustics. Installing independent operation of lighting accessories also plays an important role. The standard option is to turn on when the dimensions are on. Changing the trunk lid upholstery is carried out in order to provide additional sound insulation and smoother, softer closing of the compartment lid.

Ceiling reupholstery

The ceiling is one of the weak points in a Priora car. It is easy to damage, scratch, burn and smudge. As a result, when tuning the interior of a Priora hatchback with your own hands, you must redo the ceiling.

The simplest way is to cover it with artificial suede - a self-adhesive velvet non-woven film. Tuning includes several stages:

We disassemble the interior, remove all rubber bands, seals and interior elements. To remove the ceiling, it is necessary to dismantle all racks, clips, passenger handles, visors, and other fasteners. It is necessary to disconnect the power supply to the backlights. We pull out the ceiling that is sagging

We need to be careful, so we lower all the chairs. We paste the plastic ceiling using self-adhesive tape. We install the ceiling in place.

Thus, our efforts in tuning the car will not be in vain. We will update the interior and give the car its own character.

What devices can be connected to the cigarette lighter?

Knowing the current rating for which the Prior's cigarette lighter fuse is designed, you can calculate what power devices can be used. To do this, we multiply the current strength of 15 A by the rated voltage in the cigarette lighter - 12 V.

We find that the power of the connected devices should not exceed 180 W. And the list of devices is very wide, because technological progress does not stand still, making the life of the driver and his passengers much more comfortable. Here are some of them:

1. Compressor;
2. Air purifier and ionizer;
3. Electric kettle or boiler;
4. Fridge;
5. Massage cover or pillow;
6. Navigator, video recorder, etc.;
7. Seat heating pad;
8. Lamp or lantern;
9. Fan;
10. Vacuum cleaner;
11. Splitter.

Start your work with new soundproofing. What is the reason? Why from her?

Everything is elementary: what can you do, but the developers and the plant saved on soundproofing material, and therefore, while driving, the car acquires the qualities of a “rattle.” It is quite possible to upgrade the Lada Priora yourself. What should be done first? Decide which parts of the cabin need to be soundproofed.

If you take it seriously, it is best to install sound insulation over the entire area of ​​the cabin. The first stage is working with the ceiling. There was initially no sound protection there except for thin padding. When you drive along the road in the rain, you get the feeling that you are sitting in a trough. Work in this direction will not take much time. No more than three or four hours. You need: two sheets of splen, 2 sheets of bitoplast, 3 sheets of vibration isolator, a hard roller, a hair dryer and a stationery knife.

We tear off the upholstery from the ceiling and isolate the plastic parts. We degrease the roof area and move on. We apply the first layer on the vibromaterial, the second on splen and at the final stage on bitoplast. Use a roller. Spare no time and effort, and therefore stroke, stroke, stroke.

The work is done, you need to select the upholstery and plastic parts. You will feel the thrill of the new changes from your first voyages.

Sound insulation has many other advantages: it retains heat in cold weather and harmonizes heat exchange in the summer. But its condition must be constantly monitored and issues of tightness must be monitored.

Lada Priora is a kind of “people's” car in the countries of the former Soviet Union. Not super chic, but not “disabled” either. With a more or less decent factory interior.

And yet, many car owners are engaged in tuning the interior of the Priora. We will post photos of these experiments below, but for now we will try to answer the question: why?

Why do they do this? What is missing in the interior of a factory-built Lada?

At first glance, everything is elegant and appropriate.

However, everything is not so rosy, you just have to listen to the noise. More precisely, to a roar. Unfortunately, the engine is noisy. Therefore, the first task of tuning is soundproofing the interior. Typically, modelin or vibroplast are used as sound insulators.

If this main drawback is eliminated, you can continue to conjure further.

Possible reasons why the Priora cigarette lighter does not work

Like all other electromechanical devices, the Priora's cigarette lighter may stop working. As a rule, this is caused by various defects in the device, failures in the vehicle's on-board circuit. Also, the most common cause of cigarette lighter failure is improper use by the owner. Therefore, the most common reasons include:

1. Lack of voltage on the contacts or their malfunction.
2. Various types of fuse defects (burnout, loss of integrity).
3. Malfunction of contacts in the connector.
4. Burnout of the spiral or backlight lamp.
5. Recession of ears.

Results

The advantage of this budget car is that there are practically no competitors in its niche. Nowadays it’s difficult to buy a new, decent car for a family for 500 thousand. Therefore, people will buy the Lada Priora car. Options and prices deserve attention.

There is nothing to be done; in a crisis, Priora was forced to turn to the path once taken by the famous “seven” - VAZ-2107. Remember? The once richest and most prestigious model of the rear-wheel drive family has become the latest “classic” in AVTOVAZ’s production program. Toward the end of its release, it was made as cheap and simplified as possible, turning the car from a luxury one into a budget one.

For comparison: the smaller Granta in the basic configuration costs 383,900 rubles. We can assume that we are equal. And not only the price. Both models have an 8-valve VAZ-21116 engine with a power of 87 hp under the hood. With him, Priora does not seem too sluggish. It accelerates well and brakes well, fortunately the anti-lock braking system and electronic brake force distribution were not cut. The small wheels are not visible from the interior, but the Priora handles tolerably well on them.

I think that the Priora will still survive in the “many car for a ruble” scenario. It does not have a fatally outdated appearance, a high-quality interior and a comfortable interior. The former prima donna is let down by the design features of the tenth family platform, originally from the 90s: suboptimal ergonomics of the driver’s seat, a small gas tank and trunk for a car of this size, as well as vibrations and noise. All this shows age and makes no sense in further attempts to design expensive luxury versions. Therefore, Priora cannot avoid the fate of the “Seven” - the affordable modification now has a better chance of finding a buyer.

PLUS:

the interior is still nice

MINUS:

the trunk is smaller than that of the Granta

Lada Priora Standard

VAZ-21116 engine with 87 hp power. instead of the 106-horsepower VAZ-21127, stamped wheels with 175/70 R13 tires instead of 185/60 R14, electric power steering instead of hydraulic power steering, moldings in body color instead of chrome.

Missing: rear seat head restraints, immobilizer, engine splash guard, passenger sun visor mirror, central locking, heated front seats, power and heated exterior mirrors, power rear doors, climate system, fog lights, pocket on the back of the driver's seat, remote trunk release .

Over the entire period of its existence, this factory version has become the most popular among users of this product. This is due to the low cost, as well as the practicality of the new car. Let's look at Priora Norma Plus: what's included and how it differs from Lux.

Front of the car

To make a car bumper, you can use your own project, or find something suitable on the Internet. The manufacturing material is fiberglass with epoxy resin, or polyurethane foam, or polystyrene foam - working with them, you can achieve very impressive results. The photo below shows an example of what any car owner can do with his own hands.

There is one more important detail that catches your eye when viewing this picture - cars look much better with tuning the Priora radiator grille. Complete engine cooling is achieved due to the increased grille area, and protection from dust and dirt is effective due to the small cells. You can buy such a mesh on the market and use it to make a grille for a car radiator.

Radiator grilles currently come in many types and shapes.

Below are a few more ideas for designing a radiator grille – each of them is interesting in its own way. Of course, the possibilities in this regard do not exhaust them - these are just a few options from an infinite variety.

Using ordinary LEDs, you can install “angel eyes” on a car’s headlights, which significantly change its “facial expression”, giving some individuality.

Fuse

A fuse is an electrical switching device designed to protect electrical circuits by breaking the circuit due to its destruction or shutting down when a current flowing through it exceeds the permissible values.

Fuses come in several types and are used in all electrical circuits to protect vehicles from short circuits (short circuits). They are classified according to the rated current of the fuse link.

The fuse link is the part of the fuse that is destroyed by electrical current.

The rated current is the current of the fuse at which the fuse-link will operate indefinitely and will not be subject to destruction.

Operating principle of the fuse

When using a fuse in an electrical circuit, the operating current passing through the fuse does not exceed its rated current - this is its normal operation. But as soon as a current appears in the electrical circuit that exceeds the safe permissible values ​​​​in this circuit, regulated by the fuse, the fuse-link, under the influence of a current exceeding the rated current of the insert, begins to melt and collapse as a result of which the electrical circuit breaks.

You can restore the electrical circuit by replacing the fuse, but only after the culprit for the increased current in this electrical circuit has been found. Otherwise, the new fuse will also blow.

Where are the fuse boxes located?

Let's take a closer look at where the fuse blocks are located. So, the main unit is located near the battery, under the hood of the car. All its parts are marked F. This means that they are designed for devices with low power. It is worth noting that it is best to purchase domestic fuses for this car, since other analogues very often do not meet safety standards.

The main installation block has the following characteristics:

1. Fuse F6 can withstand a current of no more than 60 A.
2. Fuse F5 is rated at 50 A.
3. Fuse F2 is designed for a current of no more than 60 A.
4. Fuse F 1 will not fail at a voltage of 30 A.
5. F3 is rated at 60 A.

There is also another place where the fuses are located - under the instrument panel. It is marked F13, rated at 15 A. This mounting block includes the elements:

• F27 or F31 – are responsible for the electrical package control unit and are designed for 30 A;
• F19 – is responsible for heating the car seats, rated at 15 A;
• F17 and F18 - for both PTFs, designed for 10 A;
• F 16 – from terminal No. 15 of the ABS, rated for 15 A;
• F15, 5 A – responsible for the right side of light signals;
• F14, 5 A – for the light in the trunk, left side of the dimensions;
• F12 – from terminal No. 15 of devices, rated for 10A;
• F11 – is responsible for windshield wipers and is designed for 20 A;
• F10 is rated at 7.5 A and is responsible for the brake light, instrument clusters, and interior lighting;
• F9, 25 A – heating fuse;
• F8 is an alarm fuse, which is rated at 10 A.

You can view the list of all fuses and find out what they are responsible for on a special resource. Please note that you only need to replace the fuse with a similar one.

Common faults

Like any other electromechanical device, the Priora cigarette lighter tends to break. Sometimes this can be caused by design defects, sometimes by malfunctions in the machine's on-board circuit, and sometimes by the fault of the user himself. Common cigarette lighter malfunctions include:

• sinking of those same bimetallic “ears”;
• burnout of the spiral;
• broken contact in the connector;
• fuse blown.

Malfunctions can also include the burnout of a backlight lamp, however, this is more related to a decrease in the level of comfort than to serious breakdowns. In addition, it does not in any way affect the operation of the device itself and can be easily eliminated by replacing the lamp.

The sinking of the lugs is characterized by the lack of fixation of the cartridge in the pressed position. It can be caused either by the low quality of the metal from which they are made, i.e. defect, or high intensity or long period of use of the cigarette lighter.

The problem is solved by bending the “ears” inward using a thin screwdriver, naturally after de-energizing the on-board circuit. If after a short period of use the problem occurs again, it is better to replace the cigarette lighter.

When the spiral burns out, the cartridge is fixed when pressed, but does not heat up. The fault is diagnosed by ringing it using a car tester. It is not recommended to restore the spiral, as this may lead to a decrease in its resistance, which will make unwanted adjustments to the operation of the on-board circuit. In this case, the cigarette lighter also needs to be replaced.

Contact failure can be easily determined by removing the tunnel lining and checking the condition of the connector. This malfunction is not critical and can be fixed independently in a few minutes.

But as for the fuse, it makes sense to consider this malfunction separately, since its malfunction is most often caused by the human factor.

Replacing the steering wheel

Some car owners do not like the standard Priora steering wheel and they prefer to get rid of it, replacing it with something more acceptable. This could be a “sports” steering wheel of small diameter, or a steering wheel of some non-standard shape. To remove the standard steering wheel from a Priora, you need the following tools:

• flat screwdriver;
• crosshead screwdriver;
• set of hexagons;
• 24mm socket and long ratchet driver;
• new steering wheel.

Sequence of operations

The Priora's steering wheel has an airbag. So first you have to get rid of it. And only then remove the steering wheel itself.

• The negative terminal is removed from the car battery. Now you need to wait until the protective system capacitor discharges (usually this happens after 45–50 minutes).
• The steering wheel is turned so that the wheels are straight.
• The cover is removed from the steering wheel, under which there is an airbag. It is held on by 7 screws, which are unscrewed with a screwdriver.

  The cushion cover is held on by 7 screws

• The pillow itself is attached to two screws; they can only be unscrewed using a hexagon.
• The airbag is removed. Provides access to the steering wheel nut.
• The nut is unscrewed using a socket head. As a rule, such nuts are tightened very tightly, so you will have to apply serious force to unscrew it.

  After unscrewing the central nut, the steering wheel can be removed

• After unscrewing the central nut, the steering wheel can be removed and replaced with a new one. The airbag then returns to its normal position.

Video: removing the steering wheel on a Priora with an airbag

General Process Characteristics

“People’s” Lada Priora cars drive around in large numbers on the streets of cities and villages.

Tuning model of Lada

For a change, many car enthusiasts want to change something in their car, to make it stand out from the crowd. The task of tuning is to change the appearance and technical characteristics of a car. In order to tune a car, you need a car mechanic who is an expert in his field.

There are several types of tuning:

Most often, tuning of the car's chassis is carried out, but lately more and more attention has been paid to tuning the interior. The car interior is the most important part of the interior, and the issue of tuning must be taken very seriously.

You need to see your car not only from the outside, but also from the inside. Car tuning includes the following:

• complete replacement of car upholstery;
• changing covers;
• repair and restoration of seats;
• replacement of door trim to match the interior;
• reupholstery of the instrument panel;
• sound insulation;
• illumination of the car in the cabin.

Drivers of a Lada Priora can create comfort in their car with the help of tuning.

Electromagnetic relay

An electromagnetic relay is a switching device designed to relieve contacts. The work is based on the law of electromagnetic induction.

In cars, relays are used to unload contacts on control buttons, so that they, in turn, do not melt or heat up when more current appears on them. The relay consists of moving and non-moving contacts, a DC coil, a return spring, a coil core and an armature.

Relay operating principle

When a current appears on the relay coil, a magnetic field is formed in it, which in turn begins to attract the armature to which the movable contacts of the relay are attached. As a result, the moving contacts close with the fixed ones and the electrical circuit is completed.

Work on the glove compartment and armrests

Work on the glove compartment can go in several directions:

1. You can cover the glove compartment with self-adhesive film or other material.
2. You can use electrical tape to remove the rattling of the glove compartment, which sooner or later appears in any car after prolonged use.
3. Improving the glove compartment lighting is also a common option for tuning the Priora's interior.

Armrests

Armrests are usually covered with leather or leatherette. The interior space can be covered with carpet. The material, despite the fact that in terms of softness is very good, is inexpensive, its price per linear meter is about 150–200 rubles. Thanks to this, those little things that are stored in the armrest will no longer rattle when the car moves, as was the case with bare plastic.

The carpet adheres perfectly to regular Moment glue. The armrest cover knocks against the armrest insert when closed. To avoid unpleasant sound, we glue strips of soft self-adhesive tape on both sides where the armrest cover comes into contact with the insert.

Glove box

The same material (carpet) can be used to cover the inner surfaces of the glove compartment. You can also place a strip of soft self-adhesive tape along the top edge of the glove compartment lid, which softens the impact when the glove compartment is abruptly closed.

Since there is no lighting in the Priora, tuning corrects this problem. Light is supplied in two ways:

1. Through the lampshade, which cuts into the back wall of the glove compartment.
2. Through an LED strip that is glued inside.
3. LED module with connector kit.

The easiest way is to take the third path, using six LEDs from the module and connector set. On the left side of the glove compartment, when you open it, you will notice a small hole. You can bore it a little and insert our diodes into it. To remove the glove compartment, we press two stops and unclip them.

Installation of LEDs

The LED is installed from the inside after boring a small hole on the left and sits on the glue.

You will also need a limit switch with a soft spring. We fix it so that when closed it is supported by the lid. Check if you have enough distance, and if not, increase the place where the end switch will sit a little.

The backlight can be powered from the emergency lights. Since diodes have very thin wires and can fall off at any time, to extend the life of the LEDs, it is worth taking the time to unsolder the old ones and solder the wires with a cross-section of 0.75.

To get to the alarm wires, you need to remove your beard (after unscrewing the radio and all sensors). Under the beard there will be a white chip with wires (top). The positive wire goes to the emergency button - this is the red wire.

By this point, the LEDs should already be installed, and the end cap (tip) should be installed in the hole made by the drill. The end cap is screwed on with self-tapping screws. We throw a mass onto the end switch itself, using a wire with two washers soldered at the edges. We throw this wire onto the screw from the reverse side. Thus, the body of the button will be a mass. As a result, we will ensure that when the button is pressed, the circuit will be broken and the light will go out.

We will always help with advice...

On our website you have a unique opportunity to communicate directly with auto mechanics. They have extensive experience in repairing and operating Lada Priora cars, are interested in new methods of car maintenance, and monitor changes that the manufacturer periodically makes to vehicle components. Ask our experts about problems specific to your vehicle, they will definitely give valuable advice and help you find a solution. Ask, consult and share your experience with us!

And this is our VKontakte group.

Welcome to our “garage”! We always welcome new readers!

Removing and replacing the dashboard (front panel) on a VAZ 2110, 2111, 2112

Now we will show you how to remove the torpedo and replace it with a VAZ 2110, 2111, 2112. This work is done with your own hands without the use of special tools. All you need is a Phillips screwdriver, wrenches with a 10″ head and time to carry out the work.

The main reasons for replacing the front panel:

• Appearance - You want to replace your old, scratched or damaged panel with a new one.
• Sound insulation - for this you will have to remove the dashboard to carry out work on noise, sound, and vibration insulation of the cabin.
• Problem with air ducts.

We recommend disassembling the components with a partner, as well as marking or remembering the wire connections.

First of all, you need to disconnect the negative terminal from the battery, then remove the steering shaft casing, remove the steering wheel and the ignition switch. After this, we proceed to disassembling the torpedo.

Do-it-yourself oil change in a VAZ 2110, 2111, 2112 gearbox

So, below are instructions for removing and replacing the front panel on VAZ 2110, 2111, 2112 in the photo.

Unscrew 2 screws on the right and 2 on the left on the central tunnel.

Next, remove the covers on both sides.

Remove the plug near the handbrake.

Unscrew the screws on the left and right of the central tunnel.

Unscrew the screws at the back of the central tunnel.

Removing the plastic of the central tunnel.

Disconnecting the cigarette lighter wires. Mark so as not to get confused when connecting to the assembly.

Remove the gearshift knob cover.

Using a wrench, unscrew the interior heating air duct.