In the VAZ 2109, interior lighting is part of a complex scheme

At night, most drivers rarely turn on the light bulbs inside the car. But when they don't work, operating the car becomes uncomfortable. Getting into the car is complicated, especially for passengers.

The VAZ 2109 has interior lighting in the form of two sources. The first beam lamp is located at the front of the headliner. The small round lamp can be moved to suit the desired area.

A lampshade with a rectangular diffuser is designed for general illumination of the entire cabin. It is also located on the ceiling, closer to the center, more precisely, above the space between the backs of the front seats. In addition, when the doors are opened, small lights come on, and each device has individual lighting.

Features of interior lighting of the car interior

Interior lighting is represented by two sources. One of them has a directional beam and is located in the front area of ​​the headliner. The lampshade is small and round. It is under constant voltage. It can be adjusted and adjusted to the required zone.

The second lamp is intended for general lighting. Its lampshade has a rectangular diffuser and is also under continuous voltage. It is located on the ceiling, in the middle between the two front seats. When the doors are opened, small lamps come on. Each device in the car is equipped with individual lighting.

Delivery by transport company (cash on delivery, no prepayment)

Advantages:

  • the cost of delivery of heavy and large-sized orders is much cheaper than that of Russian Post;
  • There are practically no restrictions on the weight and dimensions of cargo;
  • There is a wooden crate service - this is an additional guarantee of the integrity of the order.

Disadvantages: unfortunately, there are branches only in cities.

The estimated cost of delivery for an order up to 30 kg is 450 rubles.

List of transport companies with which we cooperate:

  • TC "PEK" (cash on delivery service available);
  • TC "Business Lines";
  • TC "Energia";
  • TC "KASHALOT" (KIT) (cash on delivery service available);
  • TC "SDEK" (cash on delivery service available);
  • TC "DPD";
  • TC "ZhelDorExpedition";
  • TC "VOZOVOZ";
  • TC "Baikal-Service".

To send your order by transport company:

  1. Place an order in our online store by phone or on the website (registration is not necessary);
  2. After we receive it, our manager will contact you by phone to clarify the cost, delivery time and your wishes. Next, we will pack your order carefully and then send it to you;
  3. You will receive a shipment tracking number from us via SMS or email (if available). You can monitor the status of the order coming to you using our tracking service, as well as independently, on the transport company’s website using the track number. After the order reaches your locality and the manager of the transport company contacts you, you need to receive the order at their office or order home delivery;
  4. Upon receipt from the transport company, you pay the cost of delivery and order.

The cost of delivery is calculated based on the volume, weight of the selected product and the distance from the city of Tolyatti.

To send an order you must:

  • indicate full name recipient;
  • Your locality and region;
  • series, number of passport or driver's license;
  • Your phone number (contact).

TC "Business Lines" - Urgent delivery of goods from 1 kg throughout Russia. The exact cost can be found on the official website of the delivery service - https://www.dellin.ru TC "PEK" - Guaranteed safety of cargo for the entire duration of cargo transportation, clear information support, delivery of goods throughout almost the entire territory of Russia, Belarus and Kazakhstan in optimal time and accurately calculated cost of services. The exact cost can be found on the official website of the delivery service https://pecom.ru/ru/calc TC "SDEK" - Low tariffs compared to foreign courier companies, while the quality of the services provided meets modern international logistics requirements. Developed network of own representative offices. The exact cost can be found on the official website of the delivery service https://www.cdek.ru/calculator.html TC “ZhelDorExpedition” - Serves only large cities and towns. The exact cost can be found on the official website of the delivery service - https://www.jde.ru/branch TC "Energia" - Cargo transportation in Russia, the CIS and China. The exact cost can be found on the official website of the delivery service https://nrg-tk.ru TC "KASHALOT" (KIT) - Delivery of cargo from 1 kg to 20 tons throughout Russia and Kazakhstan. The exact cost can be found on the official website of the delivery service https://tk-kit.ru/calculate TC "Baikal-Service" - Transportation and delivery of groupage cargo by road in Russia. The exact cost can be found on the official website of the delivery service https://www.baikalsr.ru TC “DPD” - Transportation and delivery of groupage cargo by road in Russia. The exact cost can be found on the official website of the delivery service https://www.dpd.ru TC "VOZOVOZ" - Transportation of groupage cargo by regular delivery routes between Russian cities. The exact cost can be found on the official website of the delivery service https://vozovoz.ru

Disassembling lamps

To dismantle the diffuse lighting inside the cabin, it is necessary to perform the following procedure:

  1. Disconnect the battery.
  2. You need to insert the end of a screwdriver under the lampshade.
  3. Lightly press and remove the latch.
  4. Move downwards to remove the glass cover. To maintain the integrity of the lamp parts, it is worth placing a small piece of soft cloth on the end of the diffuser in the place where the screwdriver is being used.
  5. Unscrew the lamp and check.
  6. Unscrew the bolts holding the plate.
  7. The four disconnected wires are marked: ground and “+”, “-”. To avoid any difficulties during assembly, it is better to mark the wires again. If the other lamp is on, then further disassembly is not necessary.

Disassembling a lamp with directional light is done in a similar way. The lamp is removed from its socket in the ceiling using the end of a flathead screwdriver.

Attention

Any instructions for working with electrical appliances state that repairs must begin by turning off the power. Disconnect the battery and turn off the power. A small amount of voltage in a lighting circuit is not life-threatening, but if it accidentally shorts out, you can get a serious electric shock. You can find any repair and maintenance operations in the video, but they assume that you know the rules for handling electrical equipment.

Faulty light bulb

The most common reason for the failure of interior lighting fixtures. Remove the bulb and check it with a tester or other method. If it burns, then look further for the cause of the breakdown by dismantling the lamp. When assembling the lampshade, you can put in an old lamp, only it has served for quite a long time, and its resource has been exhausted, so it is better to replace it immediately, then you will not have to remove the diffuser again soon.

Circuit breakers

It is easy to check the operation of the fuses. The wire goes through the interior lighting to the stops, so it is enough to make sure that when you press the brake the signals on the rear lights come on. If there is no contact, then the box is located under the hood on the right and there is a diagram on it indicating the location of each fuse. Unscrew the bolts and remove the cover. The replacement will take a few seconds. Just in case, you should have a 7.5A fuse in stock, since in case of any short circuit in the interior and trunk lighting, dimensions and turns, it is this that burns out.

Connections are broken

If the interior lighting of a VAZ 2109 does not light up, then the cause may be bad contacts. For example, when forced on, the general interior lighting turns on, but when the door is opened, it does not. Remove the diffuser and bend the copper plate to which there is a thin pin from the door wire.

In most cases, this is not enough and the copper strip will not make a reliable contact. Then wind a thin wire where it touches the pin, or place a rubber ring under the plate. This will ensure reliable contact. Be sure to turn off the power.

Broken wire

After dismantling the lamp, use a tester to check the integrity of the wires. This breakdown requires complex repairs, so you can’t do it yourself. Contact specialized salons. The price of services often corresponds to the quality of work; it is not worth saving. When choosing a service station, pay attention to the guarantee that the craftsmen give for their work and the conclusion of the contract.

If you are confident in your abilities, then there are photos of the car’s electrical circuit on the Internet, since you will not find it in the technical documentation.

Door lighting

When entering the car, the door lights turn on along with the ceiling light. If this does not happen, then they have one fault. The negative wire goes to the ceiling lamp through the BSK LED. If wires break, fuses burn out, and contact switches fail, the interior may not be illuminated. In this case, you need to start not by dismantling the interior lighting bulb, but by checking the contacts and wires that go to the door lighting.

When the BSK light bulbs work normally, and testing showed a break in the negative wire on the lampshade, this only happened in the gap from the door to the lampshade. You can fix such a breakdown yourself, since only one core needs to be replaced, without disturbing the circuit. First, make sure the contacts work, clean them. Test the wire itself. Don't forget to turn off the power to the system.

When replacing any wire, select the same color of the insulating coating. This will help you or the auto electrician at the service station quickly figure it out in the event of a serious breakdown.

Contacts are oxidized

Contacts require constant attention and periodic cleaning to remove dirt deposits and the formation of a film of chemical compounds when interacting with oxygen. The junctions of various metals oxidize most quickly. Copper is resistant to the formation of an oxide film, so it can work for a long time without prevention.

Diagram of the mounting fuse block for VAZ 2109, 2108, 21099 (block 17.3722)

In the diagram: (the outer number in the designation of the wire tip is the number of the block, and the inner number is the conventional number of the plug)

K1 — rear window washer time relay; K2 - relay-interrupter for direction indicators and hazard warning lights; KZ - windshield wiper relay; K4 - relay for monitoring the health of the lamps (contact jumpers are shown inside, which are installed instead of the relay); K5 - headlight high beam relay; K6 - relay for turning on headlight wipers; K7 — power window relay; K8 - horn relay; K9 - relay for switching on the electric motor of the engine cooling fan; K10 — relay for turning on the heated rear window; K11 - relay for low beam headlights.

Climate control unit

How to use climate control? It's simple, you just need to know the purpose of the buttons. The main difference between the control units of cars with air conditioning and climate control is the presence of the AUTO button (20) on cars with climate control. This button is designed to automatically regulate air flow directions to more quickly achieve and maintain the selected temperature.

8 — adjustment of the stove blowing speed

9 - temperature adjustment in 1 degree steps

Technical characteristics of VAZ 2109 (Lada)

Initially, the “nine” used the following series of 4-cylinder in-line gasoline engines - 1.1 liters, 1.3 liters and 1.5 liters, which found its correspondence in the designation of the car models - 21091, 2109 and 21093.

The one and a half liter engine appeared in the Lada engine compartment a year late, but this nominal displacement was destined to become the main one. In 1994, it was modified to install a fuel injection system with distributed injection. The modern engine had a very difficult time taking root at first. Only in 1998, experiments with it ended, it acquired a look and characteristics suitable for mass production, displacing its carburetor counterparts from the automotive scene, slightly changing the official name of the model - VAZ 21093i.

Photo VAZ 2109 - side view

Photo Lada 2109 - rear view

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]