General information about the chassis of the VAZ 2108 / VAZ 2109 / VAZ 21099

Characteristics and components of the front suspension on the VAZ 2108[/caption]The front suspension of the VAZ 2108 allows the vehicle to move smoothly when driving on an uneven road surface. What is the VAZ 2108 suspension, how is it repaired and how can its characteristics be improved? The VAZ 2108 has been known on the Russian market for more than two decades. This front-wheel drive, dynamic, quite practical car, which appeared on the sales scene in the late 80s, today also occupies one of the top levels of the rating.

And now the VAZ 2108 or, as this car is popularly called, the “eight” is in wide demand and respect among motorists. Over the years of working on the model, AvtoVAZ has released a huge number of modifications: from simple and cheap to modified, improved, more powerful and functional.

Scheme

The diagram below will allow you to determine what components the assembly is divided into and what it represents in the assembly. The table will help you figure out where each suspension element is located.

Node diagram

Bottom view
It’s not enough just to know the name and location of the suspension elements. Be sure to understand how the entire system works and how all the components interact with each other.

Device Features

• The suspension consists of a guide device, elastic, damping components. The guide element serves to regulate the movement of the wheels and transfer force and moment to the car body.
• The steering device includes a telescopic strut and a lower suspension arm, which are connected by a steering knuckle. Another important element of the guide device is the stabilizer bar.
• The lower arm is made of steel and mounted to the bracket. To ensure stabilization of the lever, a brace and a stabilizer bar are fixed to it. The extension is connected by means of hinges located in the hole of the lever. The opposite end of the stretcher is combined with the bracket. On the stretcher there are flats with a key and a hexagon. They serve to ensure stabilization of its position when turning the nuts.

Levers

• The rod is mounted on the suspension arm of a short strut with a pair of heads. The stand has two heads, and a rubber-metal hinge with a stand mounting bolt is inserted into one of them. The second head contains a rubber bushing where the end of the stabilizer bar passes.
• The bracket has oval holes that make it easier to install the bar on the VAZ 2109. The outer end of the suspension arm is mounted with a steering knuckle.
• The ball joint includes a one-piece housing with a bearing. The latter is made of Teflon fabric. To ensure sealing of the hinge, its cover is treated with a special lubricant - ShRB4. If this seal is not broken as the VAZ 2109 is used, then the lubricant can easily last the full life of your car.
• Adjustment of the front wheels when turning the top bolt is ensured by the presence of a special fastening of the steering knuckle to the bracket.
• The design of the steering knuckle includes a ball bearing with a hub fixed to the shank with special splines. The cap protects the hub. It is covered with dirt-reflective rings.
• The protective casing of the brake disc is fixed to the steering knuckle, which, in turn, is connected to the hub.
• The telescopic strut is connected to the body and the steering knuckle. The upper support secures the rack with the car body and is mounted on the rod. It consists of an outer and inner body.

Telescopic stand

Knowing the design of the front suspension of your own VAZ 2109 and understanding the diagram, it will be much easier for you to carry out repairs, look for weak points, and identify areas where malfunctions or breakdowns have occurred.

Suspension repair is a rather labor-intensive and complex issue, therefore, in the absence of experience and at least basic knowledge in the field of this component of the car, it is strongly not recommended to do the work yourself.

Didn't find the information you are looking for? on our forum.

• Front suspension VAZ 2109 – diagram, design, repair

If you find an error, please select a piece of text and press Ctrl+Enter.

We recommend reading:

Spark plugs for VAZ 2106 Installation of ignition on VAZ 2107 carburetor, marks, gap in breaker contacts, checking ignition Order of armored wires on VAZ 2109 Vacuum electrovalve VAZ Installation of contactless ignition on VAZ 2121 Window lifters do not work on VAZ 2115 reasons Which is better copper or aluminum heater radiator on VAZ 21 14The dimensions of the VAZ 2114 are missing

Similar articles

What kind of oil to pour into the VAZ 2115 engine? Choosing oil for the VAZ 2110 VAZ color chart, codes, names, descriptions VAZ error codes - table with a list of all errors Material from the Encyclopedia of the magazine “Behind the Wheel” Go to: navigation, search

Back

If you find an error or want to supplement the article, select that part of the article text that needs editing and press Ctrl+Enter. Next, follow the simple instructions. New topicReply Features of the design of the front suspension Repair and operation manual – Chassis – Features of the design of the front suspension The front suspension of the VAZ 2108, VAZ 2109, VAZ 21099 cars is independent, telescopic, with hydraulic shock absorber struts, coil springs, lower wishbones with braces and a stabilizer bar . The main element of the front suspension of the VAZ 2108, VAZ 2109, VAZ 21099 is the telescopic hydraulic shock absorber strut 1 (Fig. 6.1), the lower part of the shock absorber strut is connected to the steering knuckle 5 with two bolts. The upper bolt 3, passing through the oval hole of the front shock absorber strut bracket, has an eccentric collar and a washer. Turning the top bolt changes the camber of the front wheel. The following are installed on the telescopic strut: a coil spring 17, a polyurethane foam buffer 19 for the compression stroke, an upper support 22 of the front strut assembled with a bearing 21. The upper support of the front strut is attached with three self-locking nuts to the mudguard strut of the car body of the VAZ 2108, VAZ 2109, VAZ 21099. Due to its elasticity, the support ensures that the front strut swings during suspension movements and dampens high-frequency vibrations. A bearing mounted in the upper support allows the front strut to rotate along with the steered wheels. Parts of a telescopic hydraulic shock absorber, shown in Fig. 1, are mounted in the strut housing. 6.2. A hydraulic recoil stroke buffer is installed in the upper part of the cylinder, consisting of a plunger 15 and a spring 16. It limits the movement of the rod during the recoil stroke. The lower part of the steering knuckle 5 (see Fig. 6.1) is connected by a ball joint 10 to the lower suspension arm 9. Braking and traction forces are perceived by longitudinal braces, which are connected through rubber-metal hinges to the lower arms and front cross member supports of the front suspension. At the junction of the brace with the lever and the front support, adjusting washers are installed, which change the angle of the longitudinal inclination of the steering axis. A closed-type double-row angular contact bearing is mounted in the steering knuckle (Fig. 6.3); wheel hub 4 is mounted with interference on the inner rings of the angular contact bearing. The thrust bearing is tightened with nut 6 on the shank of the outer wheel drive joint housing and is not adjustable. All front and rear wheel hub nuts are the same and have right-hand threads. The anti-roll bar on cars VAZ 2108, VAZ 2109, VAZ 21099 is a bar, the knees of which are connected to the lower suspension arms through struts with rubber and rubber-metal hinges. The middle (torsion) part of the rod is attached to the body with brackets through rubber pads. USEFUL TIPS When swinging the suspended front wheel, it is difficult to discern play in the hub bearings and ball joints. Ask an assistant to press the brake pedal, and if you feel any play, the ball joints are faulty and the ball joints should be replaced. Install wheel bearing caps with any adhesive and you will avoid many problems in the future. Rice. 6.1. Front suspension of VAZ 2108, VAZ 2109, VAZ 21099 assembled:

A control size;
1 – telescopic stand; 2 – nut; 3 – eccentric bolt; 4 – nut; 5 – steering knuckle; 6 – front wheel drive shaft; 7 – protective cover of the hinge; 8 – external shaft joint; 9 – lower lever; 10 – ball joint; 11 – decorative disk (cap) of the wheel; 12 – hub; 13 – brake disc; 14 – protective casing; 15 – rotary lever; 16 – lower support cup; 17 – suspension spring; 18 – protective cover of the telescopic stand; 19 – compression stroke buffer; 20 – upper support cup; 21 – upper support bearing; 22 – upper support of the rack. Rice.
6.2. Telescopic strut of the front suspension of a VAZ 2108, VAZ 2109, VAZ 21099: 1 – compression valve body;
2 – compression valve discs; 3 – throttle disk of the compression valve; 4 – compression valve plate; 5 – compression valve spring; 6 – compression valve cage; 7 – recoil valve nut; 8 – recoil valve spring; 9 - recoil valve plate; 10 - recoil valve disc; 11 - throttle disk of the recoil valve; 12 – piston; 13 – bypass valve plate; 14 – bypass valve spring; 15 – plunger; 16 – plunger spring; 17 – rod guide bushing with a fluoroplastic layer; 18 - guide bushing; 19 – sealing ring of the rack housing; 20 – rod seal; 21 – oil seal cage; 22 – gasket of the rod protective ring; 23 – rod protective ring; 24 – nut of the strut body; 25 – compression buffer support; 26 – rod; 27 – spring cup; 28 – rotary lever; 29 – rod limit sleeve; 30 – rack body; 31 – cylinder; 32 – drain tube. Rice.
6.3. Steering knuckle and parts of the front wheel hub of VAZ 2108, VAZ 2109, VAZ 21099: 1 – steering knuckle; 2 – outer mud ring; 3 – hub bearing; 4 – wheel hub; 5 – thrust washer; 6 – nut; 7 – retaining rings; 8 – internal dirt-reflecting ring. Quote

Characteristics and components of the front suspension on the VAZ 2108[/caption]The front suspension of the VAZ 2108 allows the vehicle to move smoothly when driving on an uneven road surface. What is the VAZ 2108 suspension, how is it repaired and how can its characteristics be improved? The VAZ 2108 has been known on the Russian market for more than two decades. This front-wheel drive, dynamic, quite practical car, which appeared on the sales scene in the late 80s, today also occupies one of the top levels of the rating.

And now the VAZ 2108 or, as this car is popularly called, the “eight” is in wide demand and respect among motorists. Over the years of working on the model, AvtoVAZ has released a huge number of modifications: from simple and cheap to modified, improved, more powerful and functional.

Return to contents

Technical characteristics of VAZ 2108

Work on the VAZ 2108 began in the early eighties. The car turned out to be original, smart, fast. The slightly elongated hatchback body evoked extremely positive emotions. Here elegance was perfectly combined with simplicity, dynamism with practicality. In addition, like all cars of the Russian concern, the VAZ 2108 was offered at an affordable price. The repairability of the model is also considered one of its positive properties.

In 1993, manufacturers decided to improve the technical part and updated the line of engines. If previously only a 1.3-liter gasoline engine was offered, now, in addition to it, there were 1.1 and 1.5-liter gasoline units equipped with different fuel injection systems. The engines operated with front-wheel drive, which was new on the Russian market at that time, and a standard manual transmission.

• Rear suspension of VAZ 2114: design, advantages and disadvantages

The car's suspension is mediocre; it doesn't filter out road irregularities very well, and if you drive on an imperfect track at a decent speed, the sensations won't be the most positive. In addition, the front suspension of the VAZ, as well as the rear, often fails. Fortunately, it is quite possible to carry out repairs yourself.

Return to contents

Tuning the G8 suspension

How will the front and rear suspensions of the VAZ 2108 be improved? Our goal is to make the G8 suspension more efficient, more reliable, and turn the car itself into an ultra-powerful system. What can be done to achieve it? The most effective thing is to automate the chassis of the car. To do this, you can either purchase a ready-made kit right away and simply install it, or, if you have at least some experience as a car mechanic, make this kit yourself.

First, we purchase sports struts and check a system such as wheel alignment. It is this system that affects the wear of the suspension; if there is even the slightest violation in it, then the suspension itself wears out, and its performance decreases. In general, we adjust the angles of car wheels. After proper adjustment, the car acquires better handling and dynamics, and even takes sharp turns easily.

Now, having checked the wheel alignment, we proceed to the most important part of the work - replacing the struts. It is important to remember one simple rule here: you only need to replace the racks in pairs. If you save on this matter and change only one, then the balance and height will be disrupted, and a serious failure will appear, which will negatively affect the chassis.

Characteristics and components of the front suspension on the VAZ 2108

In order to replace the racks, you will have to arm yourself with wrenches and spring ties. Now the work process itself. We unscrew the two bolts that are located at the bottom of the lever and one nut. It is located above, where the stem is. After this, you can remove the shock absorber. The next step is to remove the inner tube. Using zip ties, wrap around the spring and remove.

Repairing the front suspension is a more labor-intensive process, as there are springs that complicate the work. To deal with the springs, we install ties on them, compress and turn them with a wrench. Now we move the spring onto the pre-prepared stand and install it in the reverse order.

Finally, it is worth explaining why shock absorbers break. Firstly, this happens due to a reckless driving style on a difficult road. If you often drive through holes and ruts with the speed set at the maximum level, then do not expect the shock absorbers to calmly accept such loads. When driving like this, they are the first to fail.

The second cause of breakdowns is intensive engine operation without warming up in cold weather. And finally, the last thing is spacers, which, on the one hand, make the suspension more efficient, but on the other hand, they quickly damage its components.

• Life hack: front suspension of a Priora car - how to disassemble it, diagram

If you find faults with the front suspension, you should not delay repairs. Remember: not only your safety, but the safety of your passengers depends on the chassis of your car.

Return to contents

How to check the health of a car's suspension

Perhaps the most critical component after the steering and braking system that influences safe operation is the vehicle's chassis. Therefore, it is necessary to constantly monitor its condition. Of course, in a passenger car, the wear of this unit is not as severe as in a truck, but most often (and VAZ cars are no exception) designers plan for the stability and durability of the suspension scheme taking into account the soft mode.

For a qualified conclusion that the suspension is in good or faulty condition, it is better to contact a service station, where they will be able to fully diagnose the condition of your car on special stands, and the technicians, for whom the suspension diagram has no secrets, will be able to accurately identify a breakdown or minor malfunction. But still, even without knowing the device thoroughly, you need to know the most important symptoms that something is wrong with the machine. It is advisable to pay close attention to the slightest changes in the behavior of the car on the road, which may be symptoms of faulty bridges.

Features of the front suspension device

It is independent, telescopic, MacPherson type, with shock-absorbing struts consisting of hydraulic shock absorbers and springs. The suspension is complemented by an anti-roll bar. Unlike the rear suspension, the front suspension is much more complex. This is explained by the fact that the car has front-wheel drive, but there are very few parts and components. In addition to shock absorber struts and a stabilizer, these are stretch marks and a steering knuckle, as well as levers for attaching to the body and transmission.

The chassis of the VAZ 2108 is identical to many front-wheel drive budget cars. The main element of the front suspension is a strut with a hydraulic shock absorber and a twisted metal spring. At the top, a support bearing is installed in the body shell, which smooths out vibrations and prevents the rack from rolling. It also ensures that the stand rotates synchronously with the front wheels during various maneuvers.

The steering knuckle is complemented by a ball joint, which provides communication with the lower suspension arms. Stretching with silent blocks serves to compensate for forces. A wheel hub is installed in the steering knuckle on a double-row bearing, and a single bolt is used to secure the hub. The stabilizer is also connected to the levers using silent blocks.

Return to contents

Suspension selection

The main rule when selecting any spare parts is quality and reliability. The suspension performs important functions, and not only comfort, but also vehicle handling depends on the choice of spare parts. Properly selected, it should serve its purpose equally well in any conditions and on any road surface. Ultimately, suspension affects safety.

The VAZ 2108 car has a relatively light weight, and therefore (if you are not planning races on the track) you should not choose too stiff a suspension. The optimal solution as an alternative to the standard one can be called the VAZ-KW and some similar settings. Their main advantage is the ability to smooth out vibrations of the body equally well at any speed. In addition, the components and parts are distinguished by their reliability and high performance characteristics.

When choosing a suspension, you should consider the following nuances.

1. For a smoother ride, you should take a soft one. The parts must be identical to the factory ones so as not to interfere with other components of the car. When making turns, the car should not roll, and when going over bumps, smooth them out and return the car to its starting position.
2. Wheel and body vibrations, as well as vibrations, should be greatly reduced.
3. The force from the drive wheels on the frame must be correct and uniform.
4. The overall weight of the suspension is not too large so that excess load is not transferred to the body.
5. The parts must have a good margin of safety, so they will last much longer.

In addition, the suspension must be selected taking into account the use of the vehicle. For lovers of measured movement and quiet driving, you need one type. For adherents of an aggressive driving style, another one will be suitable.

Return to contents

Difficulties in replacing suspension

In general, this is not considered a complex process. Car enthusiasts will not have to deal with making homemade components. Parts for tuning are available in stores in huge quantities.

When choosing a pendant, you should also take into account such an important factor as cost. Installing an independent node will cost at least twice as much as a standard one. However, by paying more, you can get improved handling and stability of the car. One of the universal solutions could be a semi-independent chassis, which in its characteristics is similar to an independent one, but is in many ways superior to the standard one.

For aggressive driving and high speed, you should not install too soft a suspension. Otherwise, on sharp turns the car will roll heavily and lose control, which can ultimately lead to a serious accident. If serious tuning is planned, almost all standard parts will have to be replaced.

You should start by replacing the stabilizers: the standard ones will not cope with the load, so it is better to purchase a stabilizer from a VAZ 2110. It should be taken into account that you will have to change the shock absorber struts along with them. It is also better to change the shock absorbers; for efficient operation it is recommended to use gas ones. For greater stability, a spacer under the hood between the front pillars will not hurt.

Even such a minimal set of modernization will have a positive effect: rigidity will increase, and handling will noticeably improve. The car will hold the road better when cornering, and roll will be reduced even at high speed. For further tuning, you will need to install stiffer springs, this will also have a positive effect on handling, and the ground clearance will increase slightly. To reduce ground clearance, you will have to additionally buy shortened shock absorbers. Cutting springs into several turns to lower them is highly not recommended, as the consequences can be unpredictable. Even with factory shortened springs, you need to understand that the suspension will perform somewhat worse.

Return to contents

Product description

SS20 bumper for VAZ (compression stroke buffer)

A special feature of SS20 polyurethane foam fenders is a unique offer for their modifications. Shock absorber bumpers are manufactured in four options: Standard, Comfort, Highway, Sport

Applicability

• VAZ 2108-2199, 2113-2115
• VAZ 2110-2112
• VAZ 1117-1119 (Lada Kalina)
• VAZ 2170-2172 (Lada Priora)

Advantages of using SS20 polyurethane foam bumpers in VAZ cars

• protect the suspension from breakdowns;
• increase vehicle stability on sharp turns;
• operate reliably in the temperature range from -40ºС to +100ºС;
• petrol and oil resistant;
• Overall dimensions correspond to standard bumpers.

Warranty 1 year Description Purpose, design and operation of bump stops The shock absorber bump stop (compression buffer) is designed to reduce shocks in the suspension at maximum loads and act only as an elastic mechanical limiter that prevents metal impacts (true for any car, be it a VAZ or a foreign car). Buffers operate over a greater distance of the suspension travel (for example, on a VAZ 2110 at almost half the travel) and such bumpers affect the elastic characteristics of the suspension. The polyurethane foam bumper works in conjunction with the spring and helps it under high loads, preventing suspension breakdowns. The bump stop comes into operation during the compression of the suspension and is compressed together with the spring, accumulating impact energy. Working together with the spring, the bump stop provides a progressive compression characteristic of the suspension - that is, with increasing compression, it increases its rigidity. So at the end of the suspension compression stroke, the load experienced by the bump stop is even greater than the load on the spring.

The influence of the bump stop on the comfort of vehicle movement and other consumer properties

The influence of the bumper on the comfort of vehicle movement and other consumer properties. The elastic characteristics of the bumper depend on two factors - the shape of the bumper and the density of the material. Bump stops for different cars vary in both shape and height. The bumper is molded from polyurethane foam and its rigidity depends on the density of the polymer. The photo shows two different bump stops of different hardness under high magnification. It is clearly visible that the softer (on the left) bumper has a loose structure, while the harder one (on the right) has a higher density and the bubble size is smaller. The wrong choice of bump stop can either lead to suspension breakdowns at maximum loads, or, conversely, if it is too hard, turn the car into a stool (just like the wrong selection of springs). Operation and defects The rigidity of the fender changes during operation, so at low temperatures the fender becomes stiffer; in addition, the rigidity of the part is affected by the aging of the material and the ingress of operating fluids onto it. Over time, the structure of the fender material begins to deteriorate (the bridges between the bubbles burst) and the fender reduces its rigidity. As a result, more frequent and more severe impacts on breakdown in the suspension.

Expert opinion

! Expert adviceAsk a questionVK profileRuslan KonstantinovMore about the expertRuslan Konstantinov – 10 years of professional car repair experience. Graduated from Izhevsk State Technical University named after M.T. Kalashnikov with a degree in OPERATION OF TRANSPORTATION AND TECHNOLOGICAL MACHINES AND COMPLEXES. The specialization of work varies, from diagnostics and repair of engines and transmissions to consultation on the purchase of consumables. Experience in repairing electronic components. When planning suspension tuning, you need to clearly understand that you will need to upgrade not only the front, but also the rear. In addition, this is a serious financial investment. It should also be taken into account that VAZ-2108 cars have been out of production for a long time, and copies in perfect condition are very rare. You must be prepared for additional costs for replacing parts with discovered defects: for example, wheel bearings, brake discs, calipers, CV joints, etc. Often such tuning costs more than the price for the entire car on the secondary market. Although for true connoisseurs of the “chisel” this does not matter.–> VAZ Masters / Chassis / Repair

Front suspension of VAZ 2108

Rear suspension of VAZ 2108

Chassis system of the VAZ 2108 car

The front and rear suspensions make up the chassis of the VAZ 2108. The independent telescopic front suspension consists of:

• Hydraulic front shock absorber struts with a swing arm on which the steering pin is attached.
• Lower wishbones, with braces and anti-roll bars.
• On both sides there are screws with coil springs necessary to reduce the load on the racks.
• The lower ball joint connects the lower control arm with a swing arm.
• The longitudinal rods, connected to the front supports and the lower arm through metal bushings, dampen the traction and braking forces acting on the suspension while the vehicle is moving.

The rear suspension includes:

• Body vibrations are dampened by hydraulic shock absorbers, which include coil springs.
• Beam.

Rear axle

The design of the rear axle chassis of the VAZ 2109 is much simpler, this is explained by the fact that, unlike a classic rear-wheel drive car, it does not have transmission-related parts. And the load taken by the chassis is much less than that of a truck.

Rear axle chassis parts

Due to the milder operating mode (compared to the rear-wheel drive of previous models), the designers had the opportunity to simplify the design and design of this unit of the VAZ 2109. Thus, in the rear suspension of the chassis there are no stretch marks and parts for transmitting rotational force to the wheels, stabilizers (since their role is played by the beam), this slightly worsened the dynamic parameters of the car, but significantly increased reliability. The diagram of this chassis unit includes:

• Trailing arms;
• Central beam;
• Brackets for fastening the vehicle axle to the side member;
• Hydraulic shock absorbers;
• Springs (pair);
• Flanges for mounting wheels.

Rear axle design

The main element of the rear axle of the chassis of the VAZ 2109 is a beam, which in turn consists of three parts - two trailing arms and a connector. These three units are connected by welding with reinforcing linings. Brackets for installing car shock absorbers and flanges for installing wheel axles are welded onto the arms.

In the front part, hinges are installed with a lever; bolts pass through them to secure the chassis to the hinges mounted on the body side members. The shock absorbers of the rear axle of the VAZ 2109 are hydraulic with added coil springs. In their upper part, through rubber-metal bushings, they are fixed in the parts of the car body.

Repair of front suspension components

After an accident, in case of mechanical damage or replacement of silent blocks, it is necessary to remove the front suspension arm from the car. Damage to silent blocks can be determined by bulging or cracking of the rubber. Repair work is carried out in a pit or overpass, in a stationary vehicle. Work order:

• The ball joint is removed. The finger is released from the cotter pin, the nut is unscrewed and, using a puller, the finger is pressed out of the lever.
• The nut securing the anti-roll bar is unscrewed from the lever, and the rear brace mounting nut is loosened.
• The nut holding the lever on the car body bracket is unscrewed and the lever is removed from the front suspension.
• All necessary repairs to the parts are carried out, and the unit is installed in place in the reverse order of its removal.

Repair of front struts of VAZ 2108

On a VAZ 2108 car, in extreme cases, a situation arises that requires repair or replacement of the front struts. Most often, they are replaced on both sides with new ones. The front springs are replaced after disassembling the struts. Repair work is carried out using a set of standard tools and special spring ties. Work order:

• The stand is removed from the car.
• Using a wire brush removes dirt.
• Ties are installed on the springs, with the help of which the upper cup and the nut located on the shock absorber rod are released from tension.
• After tightening the spring, the shock absorber rod nut is unscrewed, and the upper support and spring are removed, along with the ties.
• The travel stop buffer and rubber casing are removed from the rod. If the removed parts are damaged, they are replaced with new ones.
• The stand is installed in a vertical position, the rod is pumped up and down several times. There should be no jamming, knocking, or failure. Otherwise, the shock absorber is replaced with a new one.

Tip: Before installing new parts, the shock absorber body must be washed with clean gasoline.

Advice: After completing work on replacing the struts, it is necessary to check the wheel alignment, which, if necessary, is adjusted by specialists from a specialized workshop.

Repair of jet traction – anti-roll bar

Periodically, when operating a VAZ 2108 car, it is necessary to replace worn parts of the anti-roll bar. This is done to restore the necessary performance characteristics of the suspension after diagnosing the front suspension. The stabilizer includes:

• barbell;
• racks;
• rubber cushions.

After installation and securing the car from moving on the inspection hole, the order of work is as follows:

• The stabilizer and adjacent elements are cleaned of dirt.
• The nuts securing the side stabilizer struts are unscrewed.
• The brackets for the rubber supports are released from their fastenings and removed from each side.
• The stabilizer bar is removed from the car.
• When replacing only the front struts with the bushings located on them, after removing their fixation, use a rubber hammer to knock the elements off the rod.

Replacing front strut braces

Replacement of extensions is carried out when it is necessary to update the chassis of the front suspension or after an accident if the extension has failed. First, you need to treat all threaded connections with a special liquid WD-40, which corrodes rust deposits, or with pure gasoline. So:

• The tightening of the nuts securing the front and rear fastening of the brace is loosened. Then the bolts securing the brace, located on the bracket and fixing it to the car body, are unscrewed.

Replacing front strut extensions on a VAZ 2108

• The stretcher is freely removable.

Tip: Before removing the brace, you need to calculate the number of shims at the rear and front ends.

The extension, rubber silent block and bracket are visually examined and all damage is identified. After eliminating defects or replacing heavily worn elements, assembly is performed in the reverse order of disassembly.

Advice: If the car is pulled to the side after repairs, you need to contact a workshop where the front suspension will be diagnosed.

Replacing the ball joint

The appearance of a metallic knock while driving a VAZ 2108 car may indicate a failure of the ball joint. You can determine whether the ball joint is out of order after lifting and fixing the wheel in a stationary state using the brake pedal, then when the car rocks, the presence of play in the ball joint will be clearly audible. The support is changed if the seal of the rubber boot is broken. Procedure:

• The car is installed on the inspection hole. The nut securing the ball joint is cleaned of dirt. The nut holding the pin is unscrewed.
• After installing the puller, the pin is pressed out of the lever.
• The lever is pressed down, the bolts securing the ball joint to the steering knuckle are unscrewed.
• The support is removed from the car.
• The new unit is installed in the reverse order of removal.

Tip: Installation of a new support must be done after lubricating the rotary pin with lithol, and the rubber boot is half filled with grease. Be sure to replace the ball mounting bolts with new ones with self-locking nuts.

Assembly of the front pillar of VAZ 2108, 2109, 21099 cars

After the front pillar of the VAZ 2108, 2109, 21099 cars was removed and disassembled, it was time to replace the faulty parts and put it back together.
Necessary tools and equipment

Screeds can be of different designs; here, the simplest ones are used as an example.

— Special wrench for unscrewing the shock absorber rod nut

Preparatory work

— We clean the parts of the rack that are planned to be reinstalled from contamination

— We replace faulty rack parts with new, serviceable ones

— Clamp the front pillar housing in a vice (by the bracket so as not to crush it)

Assembly procedure for the front pillar of VAZ 2108, 2109, 21099 cars

— Install the shock absorber cartridge into the strut housing

If you use an old cartridge, check its functionality before installation. Using your hands, press and push the shock absorber rod as far as possible several times. The rod should be recessed quite easily into the shock absorber and be pulled out with great effort. The movement of the rod of a working shock absorber should be smooth, without dips or difficulties. The rod itself should not have any damage, signs of corrosion, or deformation.

When installing a new shock absorber, it is also recommended to check its serviceability using the method described above. More information about the choice of new shock absorbers for the front struts: “Shock absorbers for the front struts of VAZ 2108, 2109, 21099”. A new strut housing nut usually comes with a new shock absorber.

With the shock absorber rod fully extended, install and tighten the strut housing nut with a special wrench. Tightening torque 12-15 kgf.m (117-147 N.m).

We tighten the nut of the strut housing using a special wrench

— Install the front suspension spring

If the spring is reused, inspect it visually. A heavily corroded and/or sagging spring must be replaced.

New springs have different lengths under test load and are therefore marked with different colors of paint (on the outside of the coils). Class “A” springs are stiffer and are marked with yellow or white paint. Class “B”, less rigid, green (blue). Springs of the same class should be installed in the front and rear suspension of the car (either all “A” or all “B”). Installation is allowed in the front class “A”, in the rear class “B”. This should be taken into account when selecting new springs for your car.

Repair of rear suspension components

Replacing the rear suspension beam

Sometimes there is a need to replace the rear suspension beam of a VAZ 2108 car. This may be after an accident, an unsuccessful trip on a bad road, hitting a curb or bump, which can lead to deformations and violations of the general characteristics of the rear suspension elements of the car. So:

• To carry out work on replacing the rear suspension beam, the rear part of the car must be suspended and freed from the total weight so that the beam is in a free state.
• All attachments are removed - the fixation of the rear shock absorbers, hoses and brake pipes, and the ends of the handbrake cables are disconnected.
• The pressure regulator earring is disconnected from the bracket located on the suspension beam.
• The nuts holding the bolts attached to the brackets of the lower part of the shock absorbers are unscrewed, after which the latter are moved to the sides.
• The last stage is to unscrew the bolts fastening to the bracket of the beam itself.
• After removal from the vehicle, all elements are subject to visual inspection. If necessary, they are restored or replaced with new ones.
• Assembly of the unit is performed in the reverse order of disassembly.

Replacing the rear wheel bearing of a VAZ 2108 car

When there is play in the wheel, which can be easily determined when driving, there is noise from behind the car, a knock. If there is a small gap, you can try to tighten the hub nut. This will slightly prolong the use of the bearing, but to completely eliminate the problem, it must be replaced. So:

• To work, in addition to the tool, you will need a hub puller, a mandrel to knock out the old bearing race, or a piece of pipe of the required diameter.
• The side of the car being repaired is raised. The wheel unscrews.
• The brake pads and drum are removed.
• Using a small piece of pipe as a lever, the hub nut is unscrewed and removed along with the thrust washer.
• The hub is removed from the axle using a special puller.
• Next, the failed bearing is replaced.
• The hub is clamped in a vice, from which the retaining ring is removed.
• The old bearing is removed using a puller or mandrel.
• The hub is washed with clean gasoline, lubricated with lithol and a new element is pressed into it.
• A new retaining ring is installed.
• The brake mechanism is assembled, the wheel is screwed into place, and the car is lowered to the ground.
• The tightening of the hub nut is adjusted, which then needs to be locked.

Signs of wear or damage to the undercarriage

1. Leaks under the car in the area where suspension parts are located. Cars of the VAZ 2109 model, as a rule, already have a long service life (and the design of the hydraulic cylinders is designed for a certain resource, which they may have exhausted a long time ago). There is a high probability that the oil seal or shock absorber rod mirror may wear out, so pay attention to possible leakage of hydraulic fluid (in principle, you need to be careful about any leaks from the car);
2. Knocking when driving, yawping along the road is the most common sign of a malfunction. As a rule, this indicates wear or loosening of the components; carefully inspect the suspension, or best of all, contact a workshop;

3. When acting on the suspension (try pressing on the hood or, conversely, lifting your car, experienced auto mechanics, when first getting acquainted with passenger cars, not only the VAZ 2109, roughly assess the condition of the chassis), the suspension does not provide sufficient resistance - the first sign of malfunction hydraulic cylinders. There can be many reasons - insufficient amount of fluid, leakage due to wear of the seals, fluoroplastic bushing, wear of the rod, malfunction of the valve mechanism. It is necessary to replace worn parts, replenish the oil in the cylinders, or eliminate the malfunction of the valve mechanism;
4. When driving (especially on uneven roads), hard shocks with a characteristic sound occasionally appear, which can even be felt on the steering (the so-called “breakdown” of the suspension). The appearance of this symptom indicates that the springs (most often the rear chassis) have lost their properties due to metal fatigue; hydraulic shock absorbers may also not work properly. In any case, it is necessary to inspect the structure of your suspension and make repairs.