Best answer: What brake pads are best for a VAZ 2114?

It is impossible to imagine driving a car without reliable and effective brakes. Vehicle safety and people's lives depend on them.

Recently, the number of sales of VAZ cars has been increasing, which leads to an increase in demand for consumables, including brake pads. For VAZ cars, the car market offers a wide range of elements for brake systems. They are divided according to the materials used in production, their methods of fixation and brands.

In our rating, we will help highlight the Top leading brands of brake pad manufacturers for VAZ cars, guaranteeing their quality.

Article number and cost of good front brake pads for VAZ 2114 from third-party manufacturers

The quality of the original front pads is rated below average by car owners. They often rattle and squeak. Therefore, it is better to give preference to analogues of the original products, which are shown in the table below.

Table - Good analogues of the original front pads

OTA

The OTA pads developed a good “cold” braking torque (324 Nm), and during the last braking at the end of all tests they showed even higher efficiency (353 Nm). But when heated to 200°C, the performance of the brakes dropped to an unacceptably low level (78 Nm). During the first “mountain cycle” braking, the pads required too much pressure in the hydraulic circuit, and after cooling, deep transverse cracks formed on the surface of the linings. Further operation of pads with such damage is unacceptable.

Replacing rear pads

Replacing the rear pads of a VAZ 2110

First you need to prepare the necessary instrumental support. In order for the replacement of the rear pads on a VAZ 2110 to be successful, you should arm yourself with the necessary tools. In this case, we will need:

• Key for 12;
• Hammer;
• Wooden block;
• Pliers;
• Screwdriver;
• Jack.

Removing the pads

The set of tools is not so extensive. You can start working. The first step is to clear the workspace and put the car on a jack. So, let's get started with the repair work. Step 1:

• Maintenance regulations for Lada Vesta

• First you need to prepare the car for removing the rear wheel;
• Carry out the operation to remove the rear wheel;
• When the wheel and disc are removed, you can see two mounting bolts on the drum that should be unscrewed. A wrench will come in handy here (usually suitable for 12).

Removing the drum

Step 2:

• We remove the brake drum.

Step 3:

• Taking a screwdriver or pliers, carefully remove the spring that tightens the rear brake pads of the VAZ 2110;
• Disconnect the guide spring - the one that secures the brake pad to the shield.

Replacing the rear pads of a VAZ 2110 is easy

Step 4:

• We remove the block from the support bar.

Step 5:

Replace the rear brake pads of a VAZ 2110

• Now you should try to loosen the spring, which is located on top; it tightens the brake pads.

Note. In order to carry out this operation, you need to turn the block itself 60 degrees to the side. As soon as it appears that the brake pad can be removed, you need to do so.

• We perform a similar operation to remove the next brake pad.

Step 6:

Replace rear brake pads on a VAZ 2110

• How to change pads on VAZ 2110, 2111 and 2112

• After the second spring is disconnected, the spacer bar should be removed.

Step 7:

• Disconnect the handbrake linkage from the cable.

VAZ 2110 rear drum pads

Step 8:

• You should definitely look and remember, or even better, sketch the connection between the handbrake rod and the brake pad;
• Using pliers, you need to disconnect the guide spring and remove the cotter pin, after which the block will detach by itself.

This completes the dismantling process.

Installation of pads

VAZ 2110 rear brake pads

The next step is to prepare for the installation of new brake pads, and in fact, their installation is all the steps that were taken during disassembly, only in reverse order. So, here's what you'll need to install your brake pads: Step 1:

• Install the brake cylinder piston: to do this, push it in as far as it will go;
• Connect the handbrake rod to the new block in the same way as it was connected to the old block;
• Insert the cotter pin.

Step 2:

• Take the guide spring and connect it to the brake pad of the VAZ 2110;
• Attach the handbrake rod to the cable.

VAZ 2110 rear block

Step 3:

• The upper spring needs to be connected to the newly installed brake pad, and its other end must be connected to the second new pad, which is now to be installed.

Installing rear brake pads

Step 4:

• First you need to rest the brake pad on the corresponding heel of the brake cylinder;
• Then pull the brake shoe by the lower edge, while the spring should tighten, which will allow you to insert the spacer bar;
• Insert spacer bar;
• You need to take the second brake pad and slide it into place so that it fits into the slot in the spacer bar.

Step 5:

• Engage the remaining spring with the brake pad of the VAZ 2110 using pliers.

Rear wheel drum diagram

Note. It is imperative to pay attention to the fact that the sheath of the handbrake cable should not touch the moving parts inside the brake drum.

• Next you need to install the brake drum in its place.

Step 6:

• Now you need to tighten the two mounting bolts using a 12mm wrench;
• Reinstall the wheel.

All that remains is to put the wheel in place

So, the brake pads of the VAZ 2110 were replaced. Now you can start replacing the other side of the car, all operations are similar. Video and photo materials will help during the work process. If you do everything yourself, be sure to follow what the instructions indicate! This way you can avoid mistakes. In addition, by carrying out the work yourself, you can save a lot of money, because the price for such services from specialists is sky-high. You can also find out about replacing front brake pads on our website.

Add a commentAdd a comment We recommend reading VAZ 2112: replacing the front pads. Tips Mastervaz 2112: replacing the rear pads in home of the front brake pads of the VAZ 2112-Technological camasal of the rear brake pads of the VAZ 2109 is timely main → Catalog 92 (GRANTA, KALINA), without ABS→ Rear brake pad (set 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 (company packaging LADA) Rear brake pad (set 4 pcs.) VAZ- 2108-21099-2110-12,1118,2170 (company packaging LADA)Characteristics

Rear brake pad (set 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 (company packaging LADA) In stock ( 100 )620 RUR + 18.6 to the bonus account Rear brake pad (set 4 pcs. ) VAZ-2108-21099-2110-12, 1118, 2170 Riginal Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12 RiginalCharacteristics

Rear brake pad (set 4 pcs.) VAZ-2108-21099-2110-12,1118, 2170 Riginal In stock ( 100 )500 RUR + 15 towards bonus account Rear brake pad (set 4 pcs.) VAZ-2108-21099 -2110-12,1118,2170 FERODO Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 FERODOCharacteristics

Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 FERODO Out of stock RUR 1,250+ 37.5 to bonus account Rear brake pad (set of 4 pieces) VAZ-2108-21099-2110- 12,1118,2170 (original packaging LADA) Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 (original packaging LADA)Characteristics

Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 (company packaging LADA) Out of stock 590 RUR + 17.7 to bonus account Rear brake pad VAZ-2108-2190 (without ABS) (440) (AL08-3502090) TIIR Rear brake pad VAZ-2108-2190 (without ABS) (440) (AL08-3502090) TIIR Characteristics

Rear brake pad VAZ-2108-2190 (without ABS) (440) (AL08-3502090) TIIR Out of stock 135 RUR + 4.05 to bonus account Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12.1118 ,2170 Valeo (562067) Rear brake pad (set 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 Valeo (562067)Characteristics

Rear brake pad (set 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 Valeo (562067) Out of stock670 rub.+ 20.1 to bonus account Rear brake pad (set 4 pcs.) VAZ-2108-21099- 2110-12,1118,2170 Allied Nippon Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 Allied NipponCharacteristics

Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 Allied Nippon Out of stock780 rub.+ 23.4 to bonus account Rear brake pad (set of 4 pieces) VAZ-1118,2190 Sport TIIRCharacteristics

Rear brake pad (set of 4 pcs.) VAZ-1118,2190 Sport TIIR Out of stock 650 RUR + 19.5 towards bonuses Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 FINWHALE Rear brake pad (set 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 FINWHALECharacteristics

Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 FINWHALE In stock ( 10 )970 rub.+ 29.1 to the bonus accountHI-Q SP1709 Brake pads LADA GRANTA/KALINA/FIAT 500 07 -/PANDA 03- rearCharacteristics

HI-Q SP1709 Brake pads LADA GRANTA/KALINA/FIAT 500 07-/PANDA 03- rear In stock ( 10 ) RUR 1,195 + 35.85 to bonus account Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110 -12.1118.2170 (VIS) (OAT package)Characteristics

Rear brake pad (set 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 (VIS) (pack OAT) In stock ( 100 )620 RUR + 18.6 to the bonus account Rear brake pad (set 4 pieces .) VAZ-1118 KRAFT Rear brake pad (set of 4 pcs.) VAZ-1118 KRAFTCharacteristics

Rear brake pad (set of 4 pcs.) VAZ-1118 KRAFT In stock ( 2 )900 RUR + 27 to the bonus account Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 BOSCHCharacteristics

Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 BOSCH Out of stock RUB 1,040 + 31.2 to bonus account Rear brake pad (set of 4 pieces) VAZ-2108-21099-2110- 12.1118.2170 (2.3.2) (Citron)Characteristics

Rear brake pad (set 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 (2.3.2) (Citron) In stock ( 6 )460 rub.+ 13.8 to the bonus accountBOSCH 0 986 487 219 Brake pads .bar.LADA 110-112/08-099 85-Characteristics

BOSCH 0 986 487 219 Brake bar pads.LADA 110-112/08-099 85- In stock ( 1 )RUB 1,315+ 39.45 to bonus account Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110 -12,1118,2170 Allied Nippon Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 Allied NipponCharacteristics

Rear brake pad (set of 4 pcs.) VAZ-2108-21099-2110-12,1118,2170 Allied Nippon In stock ( 2 )895 rub.+ 26.85 to bonus accountFENOX BP50002C3 Brake pads.LADA 110-112/08 -099 85-Characteristics

FENOX BP50002C3 Brake bar pads.LADA 110-112/08-099 85- In stock ( 5 )730 rub.+ 21.9 to bonus accountLPR 04830 Brake bar pads.LADA 110-112/08-099 85-Characteristics

LPR 04830 Brake bar pads.LADA 110-112/08-099 85- In stock (3)900 rub.+ 27 to bonus accountBREMBO S 41 503 Brake bar pads.LADA 110-112/08-099 85-Characteristics

BREMBO S 41 503 Brake bar pads.LADA 110-112/08-099 85- In stock ( 3 )RUB 1,385+ 41.55 to bonus accountMILES E210079 Brake bar pads.LADA 110-112/08-099 85- Characteristics

MILES E210079 Brake bar pads.LADA 110-112/08-099 85- In stock (5)820 rub.+ 24.6 to bonus account

Home | Prev. | 1

2 | Track. | End

Withdraw by:2020406080100

Regardless of the year of manufacture and modification, the VAZ 2110 is equipped with the same front disc and rear drum brake pads. VAZ cars are equipped similarly: 2108, 2109, 21099, 2110-11, 2110-12.

The first thing you should pay attention to when choosing is your driving style. If you prefer a relaxed driving style, then you will be satisfied with pads with low abrasive properties, but at the same time, a disc that costs much more will last longer. And if you prefer a dynamic driving style, then you can afford pads with hard linings, but the wear of both the pads and the disc will be much greater. For more details about the properties, see the note column.

Trans Master

The “cold” pads were able to develop a decent braking torque (294 Nm), but after warming up they reduced their efficiency to 118 Nm - with the “hot” norm of 128 Nm. However, the “mountain cycle” was completed without any comments, and after cooling the pads began to brake better than before the tests (314 Nm).

Below are the dependences of the effectiveness of the brake pads on the temperature during braking from a speed of 100 km/h and the change in pressure in the brake system circuit to ensure effective braking in the “high-speed cycle”

Dependence of brake pad efficiency on temperature when braking from a speed of 100 km/h

Changing the pressure in the brake system circuit to ensure effective braking in the “mountain cycle”