Increasing the clearance of the Lacetti Chevrolet: how to avoid mistakes with spacers

The ground clearance of the Chevrolet Lacetti is selected in such a way as to ensure sufficient cross-country ability while maintaining good handling throughout the vehicle's entire speed range. In domestic realities, the clearance provided by the factory is often insufficient.

The car gets hit on the bottom when overcoming road obstacles, catches on curbs while parking, and gets stuck in the snow. For these reasons, car owners resort to increasing ground clearance using various methods.


Increased ground clearance of Chevrolet Lacetti

Increasing the clearance of the Lacetti with spacers - how not to make mistakes

The term refers to the distance from the ground to the bottom of the car body. Ways to increase a road Chevrolet Lacetti: how to raise it The Chevrolet Lacetti station wagon has a ground clearance of mm. But over time, under the influence of external factors, this distance is reduced. The reason for the decrease in ground clearance is often the installation of additional equipment or external modifications.

In such cases, it is imperative to increase the ground clearance. There are two ways to do this. The first method involves the use of spacers - special rubber-metal pancakes. Their installation is carried out in several stages: Using the Chevrolet Lacetti method, it is possible to increase the ground clearance by at least 15 mm. The main thing is to choose quality spacers. Their wear resistance and practicality depend on the material. The most successful solution is considered to be spacers made of polyurethane.

They are elastic, durable and do not corrode over time. The only drawback of polyurethane spacers is their high cost.

Increase in clearance

However, such investments are completely justified, because raising the Chevrolet Lacetti's ground clearance will increase cross-country ability and prevent repair costs. The second method will require high shock absorbers or springs.

The installation process in this case takes even less time. Because of this, the load on the suspension increases and the ground clearance decreases.

Try not to carry heavy loads with you, such as bags of vegetables or a set of old tires.

This negatively affects the springs, they begin to lose their elasticity. Check the functionality of the suspension. Raise the car on a lift or jack. Inspect each rack carefully. A broken spring could cause a sharp decrease in ground clearance. Install spacers that allow you to raise the car. They are usually sold as a set.

Before purchasing, make sure that the spacer kit you are purchasing is designed for installation on your Ford Focus. Remove the wheels. To do this, unscrew all the bolts that secure the hub and disk.

Grab the wheel and how to lift a Chevrolet Lacetti onto. Remove the disc from the hub axles. Remove the bolts holding the stand.

Chevrolet Lacetti ground clearance

Carefully remove it from the recess. Carefully read the instructions that came with the insert kit.

Install the inserts and secure them with zip ties or plastic clamps. Check the length of the installed springs. Very often, several turns are cut off to lower the machine. In this case, it is necessary to purchase and install new Chevrolet Lacetti how to lift. Buy springs only of the brand recommended by the manufacturer.

After installation, the car may be slightly tilted at first. Don’t worry, after two or three days of using the car the springs will sag and the Chevrolet Lacetti how to raise the ground clearance will decrease. Install high profile tires. This will increase the ground clearance by about three to five centimeters. It is also worth considering that the high profile smoothes out all road irregularities well, so there is much less pressure on the suspension.

Over its entire considerable period of existence, many people liked it for its reliability, ease of maintenance, interesting design and many other qualities. This, perhaps, remains the main Chevrolet Lacetti to buy on the Russian market. And in order not to one day damage the bottom along with the suspension parts, many car enthusiasts increase the ground clearance. Agree, install larger diameter tires. This is one of the most popular tuning methods, which in some way can solve the problem with ground clearance.

Styling enthusiasts often mount large inch low-profile tires in place of standard steel wheels. Yes, outwardly it will look quite impressive, but if you miscalculate the dimensions and most Chevrolet Lacetti tires have a wider width than standard ones, you can play a cruel joke on handling. When installing wheels of larger diameter, there is a risk that they simply will not fit into the wheel arches or that turning the steering wheel will be complicated.

Therefore, it is very important to calculate all the nuances and dimensions.

Let's modernize the shock absorbers This method will be more effective and how to raise the Chevrolet Lacetti than the first, although it does not make adjustments to the appearance of the car.

I wanted to buy a taller car - a Duster, just for our roads. Fool, I had seen enough advertisements that the cost in Moscow was thousands of rubles and I went, thinking of moving to the river.

Increasing the ground clearance of the Chevole Lacetti

They just recently started being released. I came, traveled and was stunned.

Cheapest R. For that kind of money you could have found a better car. I went to look at the Chevrolet Lacetti Station Wagon - r. I asked the guy how much ground clearance it had, and he, thoughtfully, replied that it was 19 cm. How to raise a Duster Chevrolet Lacetti, here it’s 19, well, I think that’s enough. The thresholds look really high. After driving along the village roads, I realized that I had been duped. I went on the Internet, and there they write that the station wagon has 14.5 cm. I wanted to take out all the anger on my wife, since she really liked this car, but I thought that I was a fool myself, and switched to the manager.

If the Chevrolet Lacetti knows how to raise it, it didn’t say so. But the job was done and I had to look on the Internet where to buy spacers to increase the ground clearance. It’s good that my son-in-law and daughter live in Moscow. I wrote what I needed, sent a photo and of course they didn’t deliver. A simple plastic bag and 4 spacers, how to raise a Chevrolet Lacetti in the front and two in the rear without increasing them by 2 cm.

Tuning

Chip tuning

Since such cars are found quite often on our roads, many Chevrolet Lacetti owners strive to somehow improve or decorate their car so that it stands out from the crowd. Some people immediately start with tuning the power unit. Chip tuning of Chevrolet Lacetti can begin with engine diagnostics and determining its real performance. Next, the program that was installed at the factory is read from the electronic control unit.

Then they change it and write it back into the ECU in an updated form. Thanks to this procedure, power increases by 10%, and gasoline consumption decreases by 5-8%. But there are special firmwares that allow you to save even more on fuel, but you shouldn’t expect “nimble” driving in this case.

You can also use technical tuning of the car. For example, some replace the piston group with a lightweight one, grind the manifold, and install different camshafts on the engine for finer tuning. Using a zero-resistance filter, you can equip the engine with the required volume of oxygen.

Some owners of the Chevrolet Lacetti station wagon, sedan and hatchback create a so-called “spider” in the exhaust system - a pipe system of complex configuration and install a direct-flow muffler. Due to the increased power, it is worth changing a few things in the gearbox. Reinforced baskets and clutch disc can be used

It is important to pay attention to the braking system

Exterior tuning

If you want to change only the exterior, you can use tuning the appearance of the Chevrolet Lacetti. There are car enthusiasts who change the body. For example, they install a hood cover with air intakes, pits on the roof, gills on the wings, and so on. Do not underestimate aerodynamic body kits, designed not only to change the exterior of the car, but also to improve its handling.

Some modify the suspension and install body kits with a spoiler. The appearance of the car will also be decorated with stylish “rollers” of a larger radius and low-profile tires

If funds allow, you can pay attention to new optics and radiator grille

Interior tuning

It is also worth improving the interior, especially if you value comfort and coziness. The simplest thing is to buy rugs, covers, etc. But if you wish, you can significantly change the interior of the Chevrolet Lacetti. The seats are upholstered with more expensive and high-quality fabrics or leather. You can install new seats from famous sports brands, for example, Recaro or Sparko. They also install a sports steering wheel, which has a smaller diameter and fits better in the hand.

It is worth considering the development of interior lighting, which will also increase the overall level of comfort

Particular attention can be paid to highlighting the dashboard and organs. Thanks to the installed special door sill trim, this will not only decorate the car, but also simplify the process of getting in/out

For music lovers, it is important to pay attention to replacing the standard radio with a new, better one.

The center console is perfect for a display, and the luggage compartment can accommodate an amplifier and subwoofer. Experts also advise working on sound insulation

For music lovers, it is important to pay attention to replacing the standard radio with a new, better one. The center console is perfect for a display, and the luggage compartment can accommodate an amplifier and subwoofer. Experts also advise working on sound insulation

Experts also advise working on sound insulation

Experts also advise working on sound insulation.

Increasing wheel diameter and modernizing shock absorbers

The first method is the simplest, but ineffective and very expensive. By installing larger diameter wheels and tires on your car, the driver will increase the ground clearance by a few millimeters. In order for the ground clearance to be greater, changes will have to be made to the design of body elements. Plus, the use of larger diameter wheels creates additional stress on the car's suspension.

Some craftsmen, in order to increase the ground clearance of their car, upgrade shock absorbers by inserting special gaskets between their coils. Thanks to this method, although the ground clearance increases by a couple of centimeters, the stroke of the shock absorbers is significantly reduced, which makes the car ride much harsher.

Radical modification of the suspension

In cases where the suspension is too “dead” or if you want to radically change the ground clearance, you need to digest the body cups. When carrying out this activity, the car owner must be aware of the consequences this may lead to. Deterioration in handling, the car pulling to the side and the inability to perform wheel alignment and camber are common consequences of this type of car modification.

Video

Chevrolet Lacetti

Chevrolet Lacetti Club > Car > Suspension, chassis, gearbox > Is it worth buying a used Lacetti with automatic transmission?

View full version: Is it worth buying a used Lacetti with automatic transmission?

Greetings to all. Please tell me about automatic transmission. I want to buy a used lacetti 2-3 tap hole. I'm choosing between manual transmission and automatic transmission. After browsing through your forum I saw many topics about problems with automatic transmissions. Therefore, the question arose - is it worth going with an automatic transmission since people have so many problems with it? Or take a manual transmission, because... There's nothing special to break there. If you take an automatic transmission, what should you look at at the box? What sounds can a problematic box make? How do you generally check the condition of the automatic transmission when inspecting the car and test driving it with the seller? .

Having looked through your forum I saw a lot of topics about problems with automatic transmission: shock: that's how it is

There are a lot of topics about problems with automatic transmissions.

Using spacers

Using special spacers is the most effective and safe way to increase vehicle clearance. This method makes it possible to increase ground clearance by three or more centimeters, and good results can be achieved without subjecting the suspension and body to deformation.

The only drawback that most drivers who install spacers on their car face is a slight deterioration in handling. You should know that the thinner the spacer, the better the car's handling.

Spacers to increase the distance between the car body and the strut supports can be made of aluminum, polyurethane and so-called ABC plastic. Aluminum spacers are highly durable, but can cause corrosion if frequently driven on sand-salt roads.

Most car owners prefer spacers made of ABC plastic, since this material is durable, does not deform the body, and does not provoke oxidation and corrosion on parts and the car body. In some cases, in order to increase the vehicle's ground clearance, spacers can be installed only on the rear wheels.

Exterior Features

In the appearance of the Chevrolet Lacetti station wagon and hatchback, an Italian “trace” can be traced. The bright original design will appeal to both married couples and active youth. Among the characteristic features of the car are elongated almond-shaped light elements, a noticeable slope of the rear pillars, and recognizable multi-spoke wheels. It has more fans in Russia than the station wagon. Perhaps this is due to the external similarity of the car to the Alfa Romeo, which domestic users really like.

The radiator grille is traditionally divided into three compartments. All modifications of the car are equipped with a massive bumper and a trunk lid that can be lowered to its level. The rear exterior lighting unit has an original configuration and is conveniently located on the fenders and rear doors. More expensive trim levels are equipped with fog lights and a roof spoiler.

Clearance dimensions for the Chevrolet Lacetti

The clearance of the Chevrolet Lacetti is directly related to the vehicle load and the location where the distance is measured. The official data that the automaker provides in the manual is presented in the table below.

The car's suspension is rigid, so the actual ground clearance rarely differs from the official data. A decrease in ground clearance can only be noticed in vehicles in poor technical condition. With a “broken” suspension, ground clearance may decrease by 20-30 mm.

Maximum trunk dimensions

If you fold the rear seats, the luggage compartment measures 1,720 mm in length.

The maximum length that can be accommodated in a Lacetti with the rear and front seats folded is 2,600 mm ! This is the distance to the car's dashboard. But some manage to transport things 3 meters (3,000 mm) by placing them on the dashboard, at the bottom of the windshield.

Also, about the general overall dimensions of the Lacetti, read below

Increasing the ground clearance of the Chevrolet Lacetti without major design changes

The easiest way to increase ground clearance is to use wheels with a larger diameter than the standard ones. This method allows you to raise the car up to 15 mm. In this case, returning to the standard ground clearance is not difficult; it is enough to return the old wheels to their place. This method is not without its drawbacks. The main ones are:

  • false measurement of the distance traveled by the odometer;
  • bumps and wheel jams when driving over obstacles on the road, such as speed bumps;
  • incorrect speed measurement by the speedometer, which can lead to a fine;
  • deterioration in handling, which is most noticeable when entering a turn or at high speed;
  • inability to move the vehicle when fully loaded due to wheel jamming;
  • the need to change wheels to standard ones when passing a technical inspection;
  • The maximum increase in ground clearance is limited to 15 mm.

Installation process of a new sewer system

When starting to replace sewer pipes at this stage, it is advisable to be guided by the following sequence:

  1. Installation of a tee, for which a cuff or rubber gasket is inserted into the lower socket of a cast iron pipe.
  2. Lubricating the tee end with liquid soap to facilitate installation work.
  3. Inserting a cross into the socket. To ensure the connecting density, a linen winding or silicone sealant is used.
  4. Cutting the main plastic pipe to the required length, removing chamfers and irregularities using sandpaper.

When forming a cast-iron-plastic joint, the assembly and the tee are placed at a distance of one centimeter from each other. Correct replacement of communications is possible through the use of sliding couplings rather than expansion pipes.

To wall-mount the riser, the wall is drilled and the pipes are then secured using clamps. If the distance for installation is insufficient, before manipulation the wall is compacted with a 5-centimeter board, followed by installation of fasteners. Such a board must undergo antiseptic treatment (oil impregnation). The installation of the upper clamp should be close to the socket, and the lower one - to the shaped element of the expansion pipe. Stability can be achieved with three fastenings.

Before the final replacement of sewer pipes, a fitting assembly is carried out. Only after this the necessary rubber cuffs and gaskets are disassembled and installed. To facilitate assembly, the joints are coated with liquid soap or shampoo. It is necessary to remember to tighten the upper fastening clamp before lowering the pipe into the tee. At the same time, it must be supported using a semicircular mandrel, which serves for pipe lowering.

After these manipulations, they proceed to tightening all the clamps and connecting the sewerage system, followed by checking the riser functioning. Completing the process of replacing sewer pipes involves sewing up the riser to prevent the pipe from slipping due to thermal fluctuations and “jumping out” of the tee. It is necessary to remember about the correct use of the sewer and preventing the entry of unacceptable objects into it. After all, even if you replace unsuitable pipes with modern materials, it will not have a positive effect.

How to change the sewer (faucet) tee behind the toilet yourself

Residential buildings of the Soviet and earlier eras are mainly equipped with cast iron sewer networks. Old houses with a Khrushchev-type layout have cast iron pipelines and are designed for a standard service life of up to 70 years. In fact, owners of five-story apartments need to replace the sewer system much earlier. The reason for this may be repair work to redevelop the apartment, major or current repairs, requiring a general replacement of utility networks in the apartment: water supply and repair of the sewer pipe in the apartment.

Increase the ground clearance of a Chevrolet Cruze - Auto workshop online

From the moment of its first appearance on our market to this day, the Chevrolet Cruze model has attracted the attention of the automotive community. The reason for this popularity is that this car combines a solid design and a reasonable price. But that is not all.

The technical characteristics of the car, the most important of which is ground clearance, allow it to successfully conquer our specific roads. Thus, the designers were able to create an inexpensive, quite stylish and technologically advanced car in which you can comfortably drive around the city and beyond.

Today we will take a closer look at the design, technical characteristics, ground clearance of the Chevrolet Cruze and its other features.

Exterior

Of course, the exterior design of the car is one of its strengths. Thanks to the curving relief roof and “inflated” wings, the car looks very sporty and dynamic. Many of the model’s “classmates” are far behind it in design.

The front end matches the expensive profile of the body. The radiator grille is divided into two unequal parts by a horizontal strip, and slightly curved headlights rush upward.

The exterior of the car is very similar to a four-door coupe - one of the most fashionable body types today.

The Chevrolet Cruze sedan has the following dimensions: length 4597, width 1788, height 1477 mm. The hatchback car is 87 mm shorter than the sedan. The station wagon is 78 mm longer than the sedan. And if roof rails are installed on its roof, then it is 44 mm higher.

The wheelbase of the model is 2685 millimeters. The trunk volume of the sedan is 450 liters, the hatchback – 413, and the station wagon – 500 liters. There is a full-size spare wheel in the trunk underground.

By folding the rear seats you can increase the volume of the luggage compartment.

Clearance

The Chevrolet Cruze has earned fame in our latitudes not only thanks to its interesting design, but also thanks to its ground clearance, which is quite enough for you to drive into the private sector without worrying about the bottom of the car. The ground clearance of the model depends on the body type and some nuances.

The ground clearance of the Chevrolet Cruze sedan is officially 16 cm. In reality, this is not entirely true. Firstly, if we take into account the lower bumper trim, it will be 2 cm smaller. Secondly, in the rear of the car the ground clearance is greater due to the fact that the stern is raised. Here it reaches almost 22 centimeters.

The clearance of the Chevrolet Cruze hatchback, according to the passport data, is 155 millimeters. If you take into account the overlay, it turns out to be 135 mm. Of course, you can’t go off-road with such data, but for confident driving in our cities, it’s quite enough.

What has the Chevrolet Cruze station wagon prepared for us? The ground clearance of this modification is the same as that of the sedan. Only the feed is a little lower, due to the increased load on it.

Increased clearance

The Chevrolet Cruze can additionally lose precious millimeters if engine protection is installed. It’s better not to drive on domestic roads without it. This is still minus a couple of centimeters from the ground clearance. And if you load the trunk and put 5 passengers in the car, the ground clearance will become even less. Therefore, many resort to increasing it. This is done in three ways:

  1. The most common method is spacers. They are liners made of various materials (plastic, rubber, aluminum, etc.), which are placed between the coils of shock absorbers. This modification allows you to raise the car a few centimeters, but affects the comfort of passengers - the suspension becomes stiff. In addition, many experts do not recommend such interventions in the design of the car.
  2. Installation of larger diameter discs. This method is more suitable for a car. It allows you to increase ground clearance, but affects comfort - passengers will feel road irregularities more strongly.
  3. Well, the last, least common way is to increase the gap between the body and the strut supports.

Competitors

Many will say that the ground clearance of the Chevrolet Cruze model is not that great. It all depends on what car you compare it to. Compared to crossovers, of course, the Cruz is far behind in ground clearance, but if you compare it with its C-class competitors, the situation here is completely different. For example, the Citroen C4 has a ground clearance of only 120 mm, the Hyundai Elantra - 150 mm, the Skoda Octavia A5 - 160 mm, and the Ford Focus 2 - 150 mm. And these are manufacturer data, which are indicated without taking into account engine protection.

Interior

We've discussed the outside, now let's look inside. The salon also did not disappoint. It is interesting not only to look at it, but also to touch it. Attention to detail is evident in everything here. Interesting architecture and successful fabric-look inserts on the front panel immediately catch the eye.

But there are also plenty of shortcomings, which is not surprising, given the price category in which this car is located. The entire interior is replete with backlashes. The buttons are unclear to press, and the glove compartment closes unevenly. In terms of interior design, the Cruze is certainly one of the more interesting Koreans.

But if we talk about the build quality, its weaknesses will immediately become apparent.

But the interior is quite spacious. Three adults can easily fit in the back row. The driver's seat has quite tolerable lateral support and a wide range of adjustments. The steering wheel can also be conveniently adjusted to suit you.

Equipment

In the basic configuration, the equipment of the car is very ascetic: air conditioning for an extra charge, electric drive and heated mirrors, front windows, a simple audio system, and air blowers for rear row passengers.

Owner reviews

  • Victor, Barnaul. I drive a 2008 Lacetti. The car was equipped with a cassette radio - charming and chic! I have a car with a 1.4-liter 95-horsepower engine, now the mileage is 78 thousand kilometers. For me, this is a city sedan for every day. Inexpensive, comfortable, stylish, roomy and quite reliable device for daily trips to work, to the store, as well as long-distance and out-of-town travel, business trips, etc. On the highway I accelerated to a maximum of 150 km/h. At this speed it is very noisy in the cabin, I didn’t drive any further. But it's comfortable to drive at city speeds. The ground clearance is 145 mm – apparently for better stability and reliability in corners. The car really rolls a little and does not yaw on the highway. Maintaining the machine (oil, filters, etc.) does not take much time.
  • Valery, Simferopol. I drive a 2009 Chevrolet Lacetti. The car is Korean assembled, purchased in 2012 from the first owner. Engine – 1.8-liter. The car consumes 95 gasoline, average consumption is about 10 liters per 100 km. I accelerated to 160 km/h - overall the flight was normal, you can drive further. At this speed, you need to turn the steering wheel smoothly, without sudden movements, otherwise you can fly away completely... Due to the stiff suspension and ground clearance of 140 mm, I cannot recommend this car for country roads, due to its mediocre cross-country ability. The car is better suited for urban and suburban roads. Even in front of broken roads, speed bumps or tram tracks, you have to slow down. In such conditions, everything in the cabin cracks and rattles. It's like I'm driving on solid sharp rocks. In general, the Lacetti is only suitable for good roads.
  • Vova, Moscow. The car was purchased new, in 2007, with a 1.6-liter engine and manual transmission. At that time, this type of gearbox was considered popular among us, not that now everyone has switched to automatic transmissions... I am writing a review as a former owner of a Chevrolet Lacetti - the car was sold three years ago. In five years I traveled 38 thousand kilometers. I drove on country and city roads (mostly), but I didn’t venture into rough terrain at all. After all, I understood that the Lacetti is not well suited for such roads, and I just wanted to save the suspension. The car is really very tough, much tougher than Kalina, Granta, Logan, etc. But in terms of handling, it significantly outperforms its closest competitors. The Lacetti's sharp steering and road behavior can be compared with more expensive "Germans" such as the VW Golf. The smooth ride on smooth roads suits me, but unfortunately there is no optimal balance. So I decided to sell the car.
  • Daniil, Irkutsk. My Lacetti has 177 thousand kilometers on the odometer. The car was purchased in 2008. Version with 1.6 engine, manual transmission, air conditioning and heated seats. There are also electric windows and ABS. Perhaps nothing more. At that time it was a good package, but nothing more. I liked the carrying capacity of the car - by the way, I have a station wagon version capable of carrying up to 750 kg of cargo. It is convenient to load luggage due to the low loading height. Everything is fine with the acceleration dynamics. Regarding cross-country ability, I will say that the rigid suspension and ground clearance of 140 mm improve stability and controllability, but discomfort occurs on broken roads. This problem can be solved if the wheelbarrow is fully loaded. Then it will be comfortable.
  • Nikolay, Irkutsk. Before the Chevrolet Lacetti, I only had VAZ models like the Semerka and Volga. The Chevrolet Lacetti is a car that seems to be from another world. I liked the car in terms of acceleration dynamics, build quality and good visibility. I will also note the quality of workmanship and good finishing materials. I have a version with a 1.8 engine and a manual transmission. The car accelerates to the first hundred in 10 seconds, maybe a little more. The acceleration dynamics are impressive. The car's cross-country ability leaves much to be desired, given the ground clearance of 140 mm and the overly stiff suspension. All my friends complain about it, but everything else is a complete delight. A reliable, dynamic and roomy car, and easy to maintain compared to other foreign cars. Of course, if there is a serious problem, you need to go to a service center, but the car as a whole is perceived as more modern and of higher quality. The 1.8 engine consumes about 10-11 liters under maximum load. In my opinion, the Lacetti is still not outdated in terms of design - in profile the car looks sporty and modern. I would also like to change the front end, like the Daewoo Gentra. But I did a little tuning - I closed the top of the headlights a little, and in the end they became narrower. Overall, I liked the car, despite the low ground clearance. The wife and children are happy with the car; there is enough space in the back seat for three adult passengers. Noise insulation is at an average level - at least in the city the cabin is not as noisy as on a country road.
  • Sergey, Yaroslavl. I drive a 2007 Chevrolet Lacetti. By 2014, the car had traveled 70 thousand kilometers, and I sold it. Instead, I bought a Chevrolet Cruze. The Lacetti was a successful car of its time, but its time has passed. The Lacetti is still suitable for a budget car, but for me, in addition to the affordable price and dynamics, other features are important - comfort and convenience, safety, and lack of noise in the cabin. After all, I have children, and I want to create comfortable conditions for them. And the Lacetti is a very noisy car, especially at high speed. In addition, it is unreliable due to the stiff suspension. Passability is worsened by the ground clearance of 140 mm. At the 45th thousand the struts had to be replaced, at the 60th - the belt and rollers, gaskets. By the 90th thousand, the time has come to once again change the struts, balls, tie rod ends and consumables. The light that said check engine would often come on. In short, the car needed care, and I sold it.
  • Oleg, Murmansk. The Chevrolet Lacetti is a good-quality car that I bought in 2008 to replace a VAZ-2110. I have a sedan version with a mileage of 70 thousand km at the moment. I bought a car for February 23 - I decided to make a holiday for myself. The version with a 1.6 engine is not suitable for dynamic driving, as there is not enough power. In the city it’s still fine, but on the highway you have to press the pedal to the floor to have at least some effect. As they say, I figured out how to save money, and now I regret that I didn’t take the 1.8-liter version. Now the car works as a taxi, I drive mainly around the city. If you drive on asphalt roads, the suspension will not cause problems. On rough terrain, the Lacetti's character changes for the worse - the harsh suspension settings and ground clearance of only 140 mm have an effect. Fuel consumption is no more than 10 liters.

The use of springs to increase ground clearance

The use of springs to increase ground clearance reduces the vehicle's sagging when loading. The following types of springs are commonly used:

  • increased rigidity;
  • with a large number of turns;
  • with increased stroke length;
  • a combination of the above.

You can also increase resistance to vehicle sagging under load using interturn spacers. They are made of rubber or polyurethane. An indirect advantage of using inserts is improved vehicle handling. During long turns, vehicle roll is significantly reduced.

Video

The tee is the most popular shaped element. For sewage installations, it can be cast iron or plastic. The choice of a certain type will depend on the specific situation and several important nuances.

Often when repairing a riser or replacing it, it becomes necessary to replace the sewer tee. This can be done independently or with the help of specialists.

In the first case, it is important to have basic knowledge and follow a clear sequence of actions. So, it should immediately be noted that tees can be oblique and straight

Such elements are used for various angles of connection to the sewer riser.

Installation of a plastic sewer tee and connection to a cast iron pipe

The sewer crosspiece changes in the following situations:

  • if you need to reduce the level of placement of this element;
  • if this part is already largely worn out.

Increasing the ground clearance of the Chevole Lacetti

Recently, the following trend can be observed in the Russian car market - large cars, the so-called SUVs, are becoming more and more popular in our country. It costs more than a passenger car, even with the same configuration, but it has some advantages that are difficult to argue with.

First of all, they have high ground clearance, or ground clearance, so that you can easily overcome a rather impressive hole. Car manufacturers realized that not everyone could afford to buy an SUV and began producing compact, urban SUVs - crossovers. They don’t have as much cross-country ability, but they are still more powerful than a regular passenger car.

The presence of high ground clearance is a definite advantage, because the quality of roads in our country is very far from ideal. However, if you want, you can increase the ground clearance on a passenger car. Increasing the ground clearance of the Chevrolet Lacetti - let's look at this issue. The first option for increasing the ground clearance of the Chevrolet Lacetti is to increase the diameter of the wheels.

However, in our case it is difficult to apply, because we will have to make changes to the structural part of the Chevrolet Lacetti, and this is undesirable; malfunctions may occur. So, although changing the wheel size is the simplest method, if you look at it from a technical point of view, its effectiveness is still minimal.

It will be much more effective to modify the chassis of the Chevrolet Lacetti, or rather to modernize the shock absorbers. Spacers are inserted between the coils of the shock absorbers and this ensures an increase in ground clearance. The spring stroke decreases, and the shock absorber stroke decreases accordingly. In this case, the ground clearance increases by 1-3 cm, while the suspension becomes stiffer and the movement in the cabin is less comfortable.

Another way to increase ground clearance is to install a non-standard spring. There are also some downsides here. the most negative of which is the failure of shock absorbers. The relatively safest and most correct way to increase ground clearance on a Chevrolet Lacetti is to increase the space between the strut supports and the car body.

In this case, the suspension does not wear out and the body does not undergo deformation. The only point is that handling will deteriorate slightly. Installing a spacer between the strut support and the body allows you to increase the clearance between the road surface and the body. The thicker the spacer, the worse the handling becomes, so it is not recommended to install a spacer that is too thick. The best option is to increase the ground clearance by 3 cm. Much attention should be paid to the material from which the spacer is made.

The most popular material is polyurethane. However, it must be taken into account that during movement the polyurethane is in constant contact with the metal reinforcing bushings. It follows that the spacer is compressed and the body is subject to deformation by the bushings. The ideal material is rubber or ABC plastic; they are the most durable and do not deform the body, plus they are not subject to oxidation.

Interior

This is a budget car and therefore it is unlikely to be able to surprise you with anything in the interior; the quality of the plastic, to put it mildly, is not very good, but if you remember the price of the model, then this is to be expected. In the cabin you will find two niches for small items on the center console, an armrest, the model also has a stove and an air conditioner, in principle there is nothing else in it.

The car's spaciousness is acceptable, that is, the space is normal, but if there were more it would be better. The trunk in this regard is normal and you can load quite a few things into it.

Inside the Chevrolet Lacetti there is a 4-spoke steering wheel, behind which there is a conventional dashboard with analogue instruments and an on-board computer. In more expensive versions, the steering wheel may be equipped with cruise control buttons. There is a clock on top of the center console, and below there is a radio and selectors for controlling the heater and air conditioner. Some versions have a display that shows the selected settings.

A so-so car, but if you need inexpensive and relatively normal transport for the city, then this model is a suitable option for this if you have a small budget, but you should also take a look at the competitors, as perhaps you will like them better and satisfy your needs in the car.

Chevrolet Lacetti ground clearance: description, characteristics, spacers

Chevrolet Lacetti ground clearance is the distance between the road and the lowest part of the car. To be more precise, the ground clearance is calculated, according to factory standards, from the threshold of the vehicle to the road. Ground clearance directly affects the aerodynamics of the car, as well as streamlining.

Ground clearance on different bodies

Typically, automakers set different ground clearances for different body types. In the case of the Chevrolet Lacetti, the manufacturer set the same ground clearance for all three body types: hatchback, sedan and station wagon. So, the ground clearance is 145 mm according to factory standards.

Ground clearance of Chevrolet Lacetti.

When installing tuning spare parts, the ground clearance will change. So, if you install engine crankcase protection, the figure will decrease by almost 15 mm, and will average 130 mm. And if the car is modified by body tuning, then the ground clearance may decrease by 100 mm. Therefore, motorists often adjust the ride height using special means.

Methods for increasing ground clearance

Since the road surface in the CIS countries generally leaves much to be desired, with potholes and potholes, many Lacetti owners try to increase the ground clearance in order to avoid damage to protective elements of the body, such as bumpers and door sills. There are several ways to do this. The most common are the installation of spacers or springs with shock absorbers. Let's consider both options.

Spacers for shock absorbers to increase ground clearance.

Spacers

Spacers are rubber-metal plates that are inserted between the body and the shock absorber to increase the vehicle's ride height. These modification parts can be purchased at automobile markets or car dealerships. Since the cost is much lower than shock absorbers and springs, most motorists prefer spacers.

Types of spacers.

Let's consider the sequence of work for installing spacers:

  1. We dismantle the shock absorber strut along with all components.
  2. We remove the metal cover that secures the spring.
  3. We install the spacer so that it is between two metal plates.
    The process of installing spacers on a shock absorber.
  4. We install the mounting bolts, which will then secure the stand to the glass.
  5. We install the rack on a standard seat.
    Installed spacer on the rack.
  6. Thus, you can increase the ground clearance on the Chevrolet Lacetti by 15-20 mm.

Engine Modifications

Chevrolet lacetti: budget option

Over the entire production period, the Chevrolet Lacetti hatchback was equipped with four types of engines: gasoline 1.4, 1.6, 1.8 liters and a diesel 2.0 liter, which was intended only for the American market. This FD series gasoline unit is an improved Opel engine of the X14E versions: many components (valve system, timing) are interchangeable or have inexpensive analogues.

The changes did not affect the dynamics of the units in any way: power indicators remained at the same level, but oil consumption decreased qualitatively and the overall mileage increased. The main changes were associated with the tightening of European environmental fuel standards (transition to Euro-4, Euro-5).

Engine capacityTransmissionEngine powerDimensionsengine's typeMax speedFuel consumptionWeight
1.6MT109 hp*4295* 1445* 145*petrol175 km/h11.4* 6.1* 8.1*1175* 1660*
1.8MT122 hp*4295* 1445* 145*petrol194 km/h9.9* 5.9* 7.4*1175* 1660*
1.6AT109 hp*4295* 1445* 145*petrol175 km/h7,8* 6,4* 10,1*1175* 1660*
1.8AT122 hp*4295* 1445* 145*petrol 194 km/h7,4* 5,9* 7,4*1175* 1660*
2.0MT121 hp*4295* 1445* 145*diesel185 km/h7.1* 4.9* 5.7*1175* 1660*

Gasoline engines on the Lacetti inherited the same diseases from their predecessors: possible malfunction of the valves after 60-80 thousand mileage due to the formation of carbon deposits, resulting in tripling, loss of power and increased fuel consumption. The reason for the rapid wear of the valve system, according to experts, is due to low-quality Russian fuel, so a used Lacetti is always preferable from Europe.

Frequent failure of fuel injectors and thermostat was observed on cars produced before 2007; after modernizing the fuel system, these problems disappeared. With proper operation and timely maintenance using high-quality oils, gasoline units on the Lacetti cover 250-300 thousand km without major repairs. An oil change is usually done every 15-20 thousand km, which is an average of one year of operation.

The 2.0 diesel engine in the Lacetti is considered the most successful among owners, especially in the station wagon. Turbocharged in the factory version, it produces 121 hp. at 3800 rpm, accelerating the car to 100 km/h in 9.8 seconds. The high demand for diesel versions is explained by the fact that they were not produced in Russia; assembly was carried out entirely in Korea and Europe.

Spacers to increase front ground clearance Daewoo Gentra, Chevrolet Lacetti

How to replace rear struts? Chevrolet Lacetti I suggest you watch,

If he doesn’t know, he didn’t say so.

Chevrolet Lacetti (Chevrolet Lacetti). Reinforcement due to special metal bushings welded inside. The set includes…

Rear pillar of a Chevrolet Lacetti Chevrolet Lacetti with a spacer installed on the stock support to increase ground clearance on the rear axle from Polimer LLC

What is the ground clearance of a stock Chevrolet Lacetti station wagon spacers Lacetti Measurement of ground clearance. I screwed them to the washers so as not to knock them off center when welding, and put them in a saucer with water so as not to burn the rubber on them, and then they grabbed each one in three places. The spacers do not sit all the way on the upper cushions.

I went to look at the Chevrolet Lacetti Station Wagon - r.

I asked the guy how much ground clearance it had, and he, thoughtfully, replied that it was 19 cm. The Duster has 22, here it’s 19, well, I think that’s enough.

The thresholds look really high. After driving along the village roads, I realized that I had been duped. I went on the Internet, and there they write that the station wagon has 14.5 cm.

I wanted to take out all the anger on my wife, since she really liked this car, but I thought that I was a fool myself, and switched to the manager. If he doesn’t know, he wouldn’t say so. But the job was done and I had to look on the Internet where to buy spacers to increase the ground clearance. It’s good that my son-in-law and daughter live in Moscow. I wrote what I needed, sent a photo and, of course, they brought the wrong thing.

A simple plastic bag and 4 spacers, two for the front and two for the rear without 2 cm extensions. If you somehow manage to tighten your original washers, the ends of the shock absorber rods will simply break.

These modification parts can be purchased at automobile markets or car dealerships. Since the cost is much lower than shock absorbers and springs, most motorists prefer spacers. Let's consider the sequence of work for installing spacers: We dismantle the shock absorber strut along with all components. Diagram of spacer installation location.

CLUB CHEVROLET LACETTI/CRUZE

We remove the metal cover that secures the spring. We install the spacer so that it is between two metal plates.

We install the mounting bolts, which will then secure the stand to the glass. We install the rack on a standard seat. Consider choosing other wheels and tires. Higher radius wheels with properly selected tires can also significantly increase the vehicle's ground clearance.

Increased clearance of the Lacetti

The Niva is an SUV, so you need to choose high tires for it. Remember about the rubber bands that are installed in the suspension.

Increasing wheel diameter and modernizing shock absorbers

Over time, they become unusable and sag, which causes a decrease in ground clearance. How to increase the ground clearance of a Mazda Ground clearance or ground clearance is the distance from the surface of the earth to the body of the car. The larger its value, the easier the car will be able to overcome various obstacles on its way, which is why many motorists try to increase the ground clearance.

Instructions 1 Try putting larger wheels on your car. To do this, purchase wheels with an increased radius and tires that match them. Look carefully at the wheel arch, because if you install tires with a radius that is too large, the rubber will touch the car body even with a slight load.

Remember that changing wheel sizes can be carried out if there are recommendations from the manufacturer. This method is the simplest in terms of cost and execution, but its effectiveness is not very high. Install spacers between the shock absorber coils to increase ground clearance.

Sources

  • https://arskama.ru/ekspluatatsiya/uvelichenie-klirensa-lachetti-prostavkami-kak-ne-sdelat-oshibok.html
  • https://AvtoChehol.su/raznoe/kak-podnyat-shevrole-lachetti.html
  • https://zapchasti.expert/chevrolet/lacetti/klirens-chevrolet-lacetti.html
  • https://avtograf70.ru/diagnostika-i-remont/kak-podnyat-shevrole-lachetti.html

[collapse]

Auto parts for foreign cars, auto repair

According to my observations, the ass is trying to fail, the rear springs are actively sagging, after purchasing it for two years, the headlight range control switched from 0 to 3 and the car drives like a 21 Volga in the form of an AN airplane. Therefore, raising the front there, the lack of ground clearance is the first thing that catches your eye, whether you want it or not, you need installation spacers on the Chevrolet Lacetti rear aesthetics, at least my rear on the hatch sagged a lot - it would be better to raise it first for aesthetics - some kind of imperfection in this matter.

Post edited by bigalk - 2. So, it was like this: Car suspension in stock version. And in the luggage compartment at that time there was a photo taken earlier and posted as an example: Chevrolet Lacetti SW Chevrolet Lacetti Station Wagon It is important to know that in April, installation of spacers on the Chevrolet Lacetti, all the racks were replaced in a circle.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]