Setting internal grant thresholds

Many motorists have encountered the problem of excessive interior pollution. Dust and dirt getting on carpets is not so bad, because cleaning can be done using a regular car vacuum cleaner.

But the penetration of moisture under the coating can lead to the formation of rust and subsequent expensive vehicle repairs. For old and new Grant, door sill covers will be an inexpensive and simple solution to this problem. Self-assembly of accessories can be done in literally 1.5 hours.

What are the thresholds for the Lada Granta?

Regular plastic models, durable steel analogues, as well as designer products are produced. Grant's standard plastic door sills attract buyers with their low cost.

With careful use, the elements will last for more than a year. But stainless steel linings, although they have a higher price, can last several times longer. Their only drawback is the appearance of small scratches on the surface a few years after installation.

Special designer products are also very practical, but have an original and stylish look. For the most part, for the new Lada Granta, door sill covers from private developers may have an attractive glowing emblem or name.

Additionally, the elements are coated with a special compound that prevents minor damage to the steel surface. True, such accessories are quite expensive and require time-consuming installation.

Stickers

Protective door sill stickers for Lada Granta are an affordable alternative to plastic covers. The sticker covers a large surface area, is highly durable, and is available in different color options. The set includes 6 stickers, the cost of the set is from 400 rubles. Drivers choose stickers instead of armor film on plastic panels.

The protective sticker is made of vinyl, propylene, and consists of a base layer that determines the overall color of the coating:

chrome effect;
silver;
black metal.

The outer decorative layer imitates carbon, plastic, textiles, leather.

Why install Granta door sill covers and which products should you choose?

The main task of the overlays is to protect the transition from the threshold to the floor of the cabin. The driver and passengers will no longer cling to the mat. At the same time, water in the area of the thresholds will not flow to the base.

For modern Granta, sill covers can increase the life of the car and protect it from unnecessary damage and rust formation. The elements will also give the vehicle a more stylish and solid look.

When choosing accessories, you should pay attention to the activity of car use. If the owner rarely travels by transport, then plastic door sill covers for the Lada Granta will do just fine, which will save personal funds.

If the car is used for work or daily personal trips, then the installation of stronger and more durable elements will be required. These can be ordinary steel plates or designer accessories.

The advantages of the last two types are their high wear resistance. In most cases, the linings will serve the owner as long as the car itself. They do not require special care, but you need to remember the need for professional installation of designer products.

Grant's original illuminated door sills need to be connected to power. Otherwise, the LEDs simply won't work.

How to install standard door sills for Lada Granta?

In order for the element to really last a long time, you need to take care of the quality of the installation. First, you will need to purchase the kind of Lada Granta door sills that fit the model. You can also focus on accessories from the Lada Kalina, which have identical dimensions.

You can also consider modern products, but they exactly meet the stated requirements in terms of parameters. Once the pads have been purchased, installation can be carried out according to the following instructions:

Price and articles. Where can I buy?

You can buy door sill covers for the Lada Granta both from official dealers and in any auto accessories store, both online and regular. Noting right away that in car dealerships the selection of such accessories is usually small, and the prices are significantly more expensive than in online stores. For convenience, we post a table with the most popular options, as well as prices and their catalog numbers, at which you can buy linings in various online stores.

Manufacturer	Descriptions	vendor code	Price (average), rub
Lada	Stainless steel	99999219004200	1 600 — 2 500
SOYUZ-96	Polished steel	LAGR.31.3772	2 100 — 3 000
Rival	Stainless steel	NP.6002.3	2 000 — 2 500
Soyuz 96	With an image	LAGR.31.3773	1 000 — 2 600
Auto ARMOR	Stainless steel	NPLAGRA011	1 000 — 1 500

The price depends on the type and the specific seller, the table shows the average value based on the most popular online stores.

Delivery:

Delivery by Russian Post and transport companies. Payment upon receipt or prepayment with a discount. For prepayment on a Sberbank Card - a discount of 200 rubles.

Back

1
2
3
.
7
Further

The warehouse is located in Togliatti! The price is indicated without painting and delivery!

Types of door sills for Grants

Cars from domestic manufacturers are delivered incompletely and with defects, which the owner has to eliminate on his own. Modern VAZ products, although different from their Soviet-made counterparts, still have a lot of minor flaws. In this regard, foreign cars have gone far ahead. On Grant, the thresholds are made of easily soiled material that quickly becomes dirty. To avoid this, you will have to install them yourself.

The domestic market of auto accessories includes more than one thousand items, for every color and taste. Car door sills can be divided into 3 main groups:

What's the difference? Let's try to figure it out.

Plastic elements are most often found on our way. They are inexpensive, and some cars are equipped with them from the factory. The manufacturing quality of such linings is quite high. The features of the plastic from which the linings are made allow them to absorb impacts on the body sills and leave the factory paint layer intact. If it receives a strong blow, the plastic takes everything on itself and, in the worst case, it simply breaks. In the warm season this is unlikely, but in winter it is a common occurrence. The fact is that the plastic from which these protective elements are made changes its properties in the cold and becomes more brittle. But it is better to replace the trim than to repair damage to the surface of the body. Even if the paint layer can be restored, almost nothing can be done about the dent. In car dealerships there are linings made of durable shockproof plastic, but finding them is quite problematic: demand greatly exceeds supply.

What are the internal door sill trims for?

Door sill covers for Lada Grants primarily perform a protective function. With their help, you will protect the paint layer from mechanical damage and prevent road reagents, dirt and sand from getting under the carpet in the cabin. The fact is that passengers, when boarding, very often touch the floor covering in the cabin with their shoes, which is why particles of the road surface and other things that should not get there get there. If this is ignored, over time the body floor will begin to rust and deteriorate. And protection has no less priority: this part of the body most often comes into contact with shoes and chips, scratches and other defects appear in the area, worsening the condition of the metal of the body. There are no special lotions to protect the interior of the body from moisture and dirt, and therefore it is simply necessary to install door sill covers on the Lada Granta.

Another function they perform can be considered aesthetic. And now there are many options for decorative elements in car dealerships: simple, stylized for a specific car, chrome-plated, luminous, etc. There are so many of them, it would be difficult to list them all. In small towns there is little choice, and therefore very often car owners find a wide range in online stores. The difference in relief, colors, branded logos of manufacturers - all this makes threshold covers not only a protective element, but also a decorative one. You can always choose a set that matches the color of the interior.

What to do if the paint is peeling off

The paint on any part of the body, including the sills, begins to peel off for several reasons:

there is a corrosion area under the paintwork;
chips after impact with gravel;
enamel rupture after mechanical damage;
the paint may peel off after contact with a chemical reagent;
natural wear and tear.

Paintwork wear is observed in Chinese-made cars, when body parts are painted in one layer, are not protected, and after a year of operation the paint begins to peel off. AvtoVAZ models are painted as standard in two layers; the paint wears out if the car is used in extreme conditions. Algorithm for repainting:

Sand the part.
If there is no rust under the peeling enamel, treat with a degreaser.
Apply primer.
It is recommended to use a primer with a high zinc content. This will allow the part to be locally galvanized.
Paint it with paint to match the body color.

If corrosion is found under a strip of peeling paint, then it is necessary to carry out a full repair, first checking the condition of the bottom and wheel arches.

Do-it-yourself installation of plastic thresholds on the Lada Granta

You ordered the treasured thresholds from the store, picked them up and are about to install them. To do this, you will need the following set of tools:

Crosshead screwdriver;
Slotted screwdriver;
A stationery or pocket knife (the latter is preferable);
Wire cutters;
Self-tapping screws or self-tapping screws (if not included, select your own).

First of all, we will remove the protective rubber bands that seal the connection between the door and the thresholds. Afterwards you will need to detach the small plastic element that protects a small area on the inside. The factory carpet is attached with ordinary construction staples; they will have to be bent using a slotted screwdriver or knife (be extremely careful). Having folded back part of the interior covering, find the standard rectangular holes. Clips (a kind of plastic sleeve) are placed in these holes. Using a knife, you will need to make slits in the sheathing in places where the carpet covers the holes.

Please note that the slot must clearly follow the shape of the clip. If you make it smaller, the clips will not sit in the mounting hole and may rise up when the screw is screwed in.

At this stage, it is already possible to return the door seal to its proper place. All that remains is to figure out how the trim will be located on the threshold and simply screw it on using self-tapping screws or screws prepared in advance. Do not overdo it: it is very easy to twist the self-tapping screw, you should not tighten it too much. Otherwise, you will have to remove the clip and replace it with a new one (a twisted one will not hold the fastener, and such fasteners will be of no use).

Video instruction

To protect the carpet in the interior of Lada Granta, Kalina and Priora cars, the plant installs plastic door sill covers. However, these accessories are not available on simpler trim levels. Let's figure out whether such threshold covers are needed and how difficult it is to install them yourself.

The main purpose of internal door sill trims is to protect the edges of the carpet from dirt and dust. This is especially true for owners who transport children in their cars.

Currently, you can buy a set of plastic door sill covers for 300-650 rubles (without delivery). You can find them in online stores by catalog numbers:

Front right (Granta/Kalina - 1118-5109076; Priora - 2170-5109076)
Front left (1118-5109077 and 2170-5109077)
Rear right (1118-5109078 and 2170-5109078)
Rear left (1118-5109079 and 2170-5109079)

If the kit does not include mounting screws (16 pcs) and bushings (16 pcs), then they can be found using article numbers 1118-8212786 and 1118-8212778, respectively.

Dent Repair

Dents on decorative plastic overlays are corrected if there is no crack in the product. When the plastic ruptures after an impact, the lining is replaced with a new one. Fast and Furious spare parts are quite difficult to crush, the body kits can withstand significant side impacts, and they are repairable. Metal thresholds, as part of the sidewall, are straightened in ways that depend on the depth of the dent and damage to the paintwork. Repair options:

Extracting a metal dent with a reverse hammer.
Repair without welding using a vacuum suction cup.
Correcting dents using hooks using the PDR method without painting.

The method without welding is used for metal linings and plastic elements, if the car enamel layer is not damaged. The most common option is using a reverse hammer, if the standard metal element is significantly deformed, and the vacuum suction cup method, if there is no damage to the paintwork. After removing the dent, it is recommended to additionally install protective panels.

How to install

Bend the edge of the seal and remove the fastening brackets (nippers) underneath it.
Remove the plastic threshold profile under the carpet.
Install plastic bushings into the body holes.
Make holes in the carpet in the area of the installed bushings (with a hot nail).
Install the door sill trim and secure it with screws.
The front sills are installed in a similar way, but are additionally secured with a standard screw, which is located in the area of the driver’s left foot.

The whole process is also shown in the video:

What do you think, are these accessories useful? Let us remind you that the following accessories have recently become popular: a gas tank cap bracket and a switch key.

FakeHeader

Comments 17

Were they not there at all? economy - pelvis

why even install them?

So that the carpet doesn't turn into shit. in this place.

I've been driving almost every day for two years, like new rapids

Mine are also like new, because I immediately wipe them off if someone gets them dirty. But plastic is easier to wipe than carpet.

my opinion, the view is not very good

I don't know, they are priced in the deluxe suite from the start. Looks normal. Certainly better than carpet that goes under the rubber band.

They are also in the top nine initially, which is why I don’t put them.

1. I removed the slats, but it was possible to make holes for self-tapping screws directly in them. With slats it is more convenient to stretch the carpet. 2. In the rear facings, I drilled a hole in each for side mounting.

I also removed the lower trim of the pillar, but didn’t touch the rubber

Well, I wouldn’t recommend unhooking it from the plastic slats, especially since it easily rises and bends with the carpet. I also don’t see the point in making holes - everything can be cut normally with a self-tapping screw. I simply inserted the clips into the threshold and screwed in the screw.

I was given self-tapping screws with a blunt tip. Oh, I'm tired of it. It’s easier to punch holes in advance with a thick awl