Cabin filter Chevrolet Lacetti sedan how to replace

Clean air in your car is as important as clean gasoline in your tank. The air conditioner and cabin air filter are responsible for keeping the air clean and maintaining a comfortable microclimate in the cabin. The Chevrolet Lacetti filter element costs a penny, and you should not neglect replacing it. You should also not reuse the filter, since there is a possibility of damaging the air conditioner evaporator. Where it is, how to replace it and what not to do, we will figure it out right now.

Why did it happen so?

Perhaps the automatic requests do not belong to you, but to another user accessing the network from the same IP address as you. You need to enter the characters into the form once, after which we will remember you and be able to distinguish you from other users exiting from this IP. In this case, the page with the captcha will not bother you for quite a long time.

You may have add-ons installed in your browser that can make automatic search requests. In this case, we recommend that you disable them.

It is also possible that your computer is infected with a virus program that is using it to collect information. Maybe you should check your system for viruses.

If you have any problems or would like our support team, please use the feedback form.

Clean air in your car is as important as clean gasoline in your tank. The air conditioner and cabin air filter are responsible for keeping the air clean and maintaining a comfortable microclimate in the cabin. The Chevrolet Lacetti filter element costs a penny, and you should not neglect replacing it. You should also not reuse the filter, since there is a possibility of damaging the air conditioner evaporator. Where it is, how to replace it and what not to do, we will figure it out right now.

How often should I replace it?

The standard replacement period for cars is the interval between two scheduled maintenance, that is, the cabin filter in the Chevrolet Lacetti is changed once every 15 thousand kilometers. However, the operating conditions of the machine can vary greatly - if in winter it works quietly and more, then in summer on dusty roads it can become noticeably clogged for 5-6 thousand.

The filter life especially drops in the fall - leaves that enter the ventilation are retained by the filter and, in a humid environment, remain in the box, beginning to rot. Even after shaking them out, it is not always possible to get rid of the unpleasant odor that literally permeates the cotton cartridge. Fortunately, a new one is inexpensive - well, replacing the cabin filter with your own hands does not take much time.

Which side to install the Lacetti cabin filter

Cabin Filter Replacement Guide

Recently, Chevrolet Lacetti cars have firmly established themselves in the domestic automobile market - this vehicle is popular and widespread due to the combination of price and quality. And if you are the owner of this car, then all repair work and maintenance falls on your shoulders. Including replacing the Chevrolet Lacetti cabin filter.

Cabin filter location

If you feel in your car that when you turn on the heater or air conditioner it smells of dust or fumes, then in all likelihood it is time to change the cabin filter. Typically, such elements of the purification system manufactured by the manufacturer can trap up to 95% of harmful substances contained in the air.

It is located in the interior of your Lacetti - its cover is located in front of the front passenger seat. It is almost impossible to see with the naked eye, since it is hidden by the glove compartment. Perhaps the main difficulty in the process of replacing this component is that it is not so easy to get to. To gain more comfortable access to the filter, you will need to remove the glove compartment.

What do we need?

Replacing an element in a Chevrolet Lacetti is an activity that does not require any special requirements. You can simply perform this procedure on the side of the road. To do this you will need:

a set of keys; Screwdriver Set; ratchet to “10”; pliers;

And of course, a new filter.

Step-by-step replacement instructions

The manufacturer of these cars advises replacing this component every 15 thousand kilometers. In conditions of increased dustiness or regular driving on dirty roads, this element needs to be changed a little more often - every 10 thousand km. When driving in dusty areas, its service life is reduced. It is also recommended to replace this component of the cleaning system if there is mechanical damage to any part of it. It is worth noting that changing filters for Chevrolet Lacheti Sedan and Hatchback models is carried out according to the same principle.

Remember! Saving is not worth it!

Some car enthusiasts do not replace it, but only wash or clean this component, and then put it back. This makes no sense, since it is literally impossible to wash the microscopic holes of the element, which are clogged with dust and dirt, with water or other liquid. As a result, a dirty filter is placed in its old place, since washing does not help this matter. As a result, the air entering the cabin will not be cleaned.

So, you decided to change an element in your Lacetti:

1. First of all, you need to remove the glove compartment. To do this, unscrew the five screws that secure it to the dashboard. In the photo below, the red arrows show the screws that secure the glove compartment, and the green arrows show its hinges:

2. You need to disconnect the battery terminals - this is done because you will have to disconnect the wires from the glove compartment light bulb. You can also turn off the corresponding fuse on the unit.

Attention! If this is not done, the fuse will most likely fail. And he is responsible not only for the light in the glove compartment, but also for the instrument panel and even the low beam headlights

3. Remove the small metal plate from the air conditioner housing.

4. Then we move the glove compartment to the side and on the top left side we see four self-tapping screws that secure the interior element itself.

5. Using a “7” wrench, unscrew the fastenings of the filter component.

6. After this, pull our filter down to remove it. If it has never been replaced or was replaced a long time ago, it may get stuck, so use extra force to remove it.

8. Take a new filter and install everything in the reverse order, not forgetting the battery.

Video “Replacing the cabin filter in a Chevrolet Lachetti”

This video provides detailed instructions for replacing the cabin filter in a Chevrolet Lacetti.

If we consider the Chevrolet Lacetti car from the cost side, the brand will look quite attractive. In addition, you can significantly save your money if you carry out simple procedures required by regulations yourself. Your car will last longer and cause fewer problems if you replace all filter elements in a timely manner.

Where is the cabin filter located and when to change it

The Lacetti cabin filter is installed in the ventilation, air conditioning and heating system cartridge on the right side immediately behind the glove compartment. To replace it, it will be necessary to remove the glove box cover, as required by the Chevrolet Lacetti operating manual. However, with certain skills, you can do without it. The peculiarity of the Lacetti saloon is that it has a plastic frame with cuts on the sides, which allows it to bend in half. This greatly simplifies installation.

Lacetti interior installation diagram

The Lacetti cabin filter should be replaced at least once every 10-15 thousand kilometers, according to the factory’s recommendations. At the same time, experienced owners do not put off replacement and try to complete it as early as possible, and here’s why:

• a dirty cabin filter creates additional load on the electric motor of the heater and ventilation, which reduces its service life;
• The efficiency of the interior cabin decreases quite noticeably by 4-5 thousand mileage;
• a clogged filter contributes to the accumulation of dust and condensation on the air conditioner evaporator, and this leads to corrosion on its body; the evaporator is not the cheapest spare part;
• on the same evaporator a layer of wet dirt forms, and these are ideal conditions for the proliferation of microorganisms and bacteria, which will not be easy to drive out of the air conditioning system;
• a musty, unpleasant odor appears in the cabin.

Chevrolet Lacetti cabin filter replacement technology

The glove compartment cannot be removed unless five screws are unscrewed. Their location is clearly shown in the photos below; you can find them by the red arrows. In turn, the hinges with which the glove compartment lid can move are indicated by green arrows.

Once you have the screws in your hands, you can pull out the glove compartment, but before that, do not forget to disconnect the wires for its lighting. There are only two of them in this car model.

Four self-tapping screws hold the metal plate in place; to get to the filter, they need to be unscrewed.

After this you will see the purifier seat. Remove the old filter, wipe its location well and install a new cleaner.

Replacing the Chevrolet Lacetti cabin filter -

For budget cars, self-service is the norm rather than the exception: you can save even on routine maintenance operations by doing the work yourself, especially since the simple design of these cars allows you to do without special tools or special skills. Chevrolet Lacetti (aka in other countries – Daewoo) is a typical “state employee” - the design, which goes back to old Opel cars, has been well studied by repairmen, so at least replacing the cabin filter with your own hands will not cause any difficulties. Moreover, the cars of this series are as unified as possible - whether it’s a hatchback, a sedan or a station wagon, the procedure is the same, and the spare part number is the same.

How often should I replace it?

The standard replacement period for cars is the interval between two scheduled maintenance, that is, the cabin filter in the Chevrolet Lacetti is changed once every 15 thousand kilometers. However, the operating conditions of the machine can vary greatly - if in winter it works quietly and more, then in summer on dusty roads it can become noticeably clogged for 5-6 thousand. The filter service life drops especially in the fall - leaves entering the ventilation are retained by the filter even in a humid environment linger in the box, beginning to rot. Even after shaking them out, it is not always possible to get rid of the unpleasant odor that literally permeates the cotton cartridge. Fortunately, a new one is inexpensive - well, replacing the cabin filter with your own hands does not take much time.

Choosing a cabin filter

The original cabin filter for Lacetti has the number 96554378, but it costs almost a thousand rubles - most owners of a budget car, especially those living in dusty areas, will choose more budget options. There are quite a few of them - both the popularity of the model itself and the use of similar filters on more than one model of the General Motors concern. Among the common replacement options, we point out TSN 9.7.18, Champion CCF0026, SCT SA1141, Finwhale AS605; the domestic manufacturer offers a high-quality carbon “Nevsky filter” NF-6155C. All of them cost between 200-300 rubles, more expensive options from well-known filter specialists will cost about 500 - for example, Bosch 1987432223, Mahle LA362. The optimal replacement for a Chevrolet Lacetti cabin filter is, most likely, an inexpensive carbon filter: with a small It won’t be expensive to buy it more often, but you will always have clean air in the car, filtered from foreign odors.

Instructions for replacing the cabin filter on a Chevrolet Lacetti

So, regardless of the body or engine size (at least 1.4, at least 1.6), the work will require a minimum set of tools: a ratchet with a “10” head and a Phillips screwdriver. To begin with, it is best to remove the glove compartment, especially if it has a separate glove box drawer at the bottom - it is simply attached, and this will make access to the filter cassette much easier. Two self-tapping screws secure the glove compartment at the bottom next to the hinges, three more can be seen by opening its lid. By pulling the glove compartment towards you, we disconnect the connectors from it, after which it can be put aside.

By unscrewing the four screws that secure it, you can remove it and pull the filter down. The main thing is that debris does not get into the fan casing - after replacing the cabin filter on the Chevrolet Lacetti yourself, you should turn on the stove and listen for any extraneous noise. But if something gets into the impeller, the problem is not big - by unscrewing the four screws at the bottom, you can lower the fan motor and clear the “squirrel wheel” of debris.

Here it is a little more difficult than on most cars due to the configuration of the air ducts: having closed the cabin filter cover (without inserting a new one!), you need to find the air conditioning drain pipe under the hood (it is located next to the steering rack boot) and, having removed it, insert it into the hole an aerosol can extension with the appropriate product. The air dampers of the “stove” are adjusted for maximum flow to the legs. The product is sprayed with several clicks on the bottle so that the foam that gets on the radiator has time to drain, then the drainage tube is returned to its place, and several more portions are sprayed through the removed cabin filter cover, after which you can install the new filter in place, being careful not to damage the foam seal around its perimeter. Next, just put the cross member back in place and secure the glove compartment back. Video of replacing the cabin filter on a Chevrolet Lacetti (3

Which Lacetti cabin filter is better, prices, articles, characteristics

Most of the cabin filters for the Lacetti are produced in Korea and China. There are several models from Eurasia, the most expensive ones are produced in Europe, unless it is a global company and the brand does not cover Chinese production with a big name (as is the case with Goodwill filters). A table with prices and articles for Lacetti cabin filters is under the spoiler, and we will look at the most popular of them.

1. The South Korean AMD FC22 performed quite well; it is a simple dust filter, costs around 100 hryvnia, has a rigid mounting frame and is installed without any problems.
2. NSP with catalog number 0196554378 , price about 70 hryvnia, with a rigid frame, stable dimensions, a regular dust filter.
3. Finwhale , Germany, catalog number AS605 . Price 120 hryvnia for 2022. It didn’t cause any particular excitement among the owners, but the quality is not much worse than the original GM.
4. AC Delco with article number 19347483 , an American brand, owned by GM, is actually completely similar to the expensive original and, with a price of 130 hryvnia, is a strong competitor to it.
5. Parts-Mall, a global company with facilities in both Europe and China. Article PMC003 , price about 140 hryvnia, good quality, if not China.

These were ordinary dust filters, but there are also carbon filters on sale, which clean the air more effectively, but are somewhat more expensive. However, we discussed cabin filters of different designs and manufacturers in great detail here.

Cabin filter

The cabin filter is designed to clean the air flows entering the car interior, ridding its contents of dust, pollen, fungi, bacteria, fluff and plant spores, while allowing us to breathe easily. All this is ensured subject to timely replacement of the filter element and the quality of its manufacture.

Strict requirements are applied to the cabin filter; it must clean the air entering the car interior as much as possible. The estimated quality of purification will be 90%, and in the remaining 10%, the presence of harmful substances and particles should be minimized. Fulfilling these requirements, the filter must also not lose its operating properties and continue to work under harsh operating conditions for as long as possible, trying to meet the replacement periods recommended by the manufacturer. In addition, its main function remains to allow the maximum purified amount of air into the car interior.

The cabin filter element may have several layers. The simplest and most necessary layer is made of paper; it is capable of trapping large dirt particles, more than 10 microns, that enter the filter. After the paper layer there is an electrostatic filter layer; it traps smaller particles, less than 10 microns. Further, some models of cabin filters are equipped with a special layer that contains activated carbon.

Using activated carbon impregnation, the filter purifies the air and does not allow unpleasant odors and harmful gases to pass through. This process is called adsorption. The final layer is an additional filter element that completes the cleaning, as they say, a reserve parachute. Thus, cabin filters can be single-layer or three-layer, it all depends on the manufacturer, which filter he will choose to install on a particular brand of car.

Main functions of the air filter

To take care of you, the air filter on the Chevrolet Lacetti vehicle model is constantly working.

When passing through it, many harmful substances, such as dust, dirt, bacteria and much more, which are contained in the air, are retained in it, thanks to which you can breathe freely and pleasantly in the cabin.

But you should count on such operational efficiency only if the machine is equipped with a high-quality filter, which, moreover, has a sufficient resource, and is not completely forgotten by dust and other substances.

Large manufacturers who care about their reputation use only high-quality materials in the production of filters, so their purifiers fully comply with quality standards.

A filter manufactured in accordance with the technology is capable of stopping up to 90 percent of harmful substances contained in the air flow. A good purifier should effectively prevent the penetration of harmful substances throughout the entire period specified by the manufacturer. At the same time, clean air must also enter the cabin.

Sometimes it’s even surprising that such a simple device in its design performs such an important task - it purifies the air, ensuring people’s well-being. It is quite interesting to take a closer look at the filter design.

The first layer most often consists of paper, the task of which is to hold large particles with a diameter that exceeds 10 microns.

After it comes the next layer - electrostatic, it does not allow smaller particles to pass through.

The third layer is activated carbon and it is a distinctive option for filter models from well-known manufacturers that have earned a good reputation among consumers. This substance has excellent adsorption, which allows such cleaners to absorb unpleasant odors.

How to change

To replace the Chevrolet Lacetti cabin filter yourself, you must remove the glove compartment. This is required to facilitate access to the element seat.

The replacement sequence is as follows:

1. Disconnect the negative terminal of the battery. This is required to prevent a short circuit when removing the glove compartment. Without disconnecting the battery, you can remove the fuse marked F21 from the passenger compartment.
2. Unscrew the 5 glove box mounting screws.
3. Very carefully remove the glove compartment from its seat.
4. Disconnect the power terminals for the glove compartment lighting.
5. Unscrew the fixing bolts of the glove compartment mounting plate.
6. Remove the four bolts securing the cover.
7. Remove the element itself directly.
8. Next, you need to blow out the system by turning on the maximum fan speed.
9. After purging, you can install a new filter. To make the task easier, you can break the frame into two parts without damaging the paper itself.
10. Reassemble everything in reverse order.

Note! Some manufacturers make a small notch on the body of the part. This is necessary to facilitate the installation of a new element in the car. The frame simply bends in half, which greatly simplifies the installation process.

Replacement video

The entire replacement process can be seen in the video:

Tinting of the future! TROKOT frame curtains provide privacy for your car with protection from the sun and fines. — TROKOT curtains are 10 times better than tinting! — More than 55,000 Russian motorists chose these curtains! - Set up in 10 seconds, remove in 3 seconds!

How to replace the cabin filter on a Chevrolet Lacetti

Before replacing the cabin filter, it is imperative to turn off the power to either the entire car by removing the terminal from the battery or removing fuse F21, which is shown in the photo below. This is necessary so as not to inadvertently close the glove compartment lighting circuit, and at the same time the low beam.

We disassemble the lower part of the glove compartment and disconnect the backlight terminals.

When the fuse is removed, unscrew the four bolts under the glove compartment.

Remove the cartridge cover.

We take out the old filter.

We thoroughly blow out the system (preferably with a vacuum cleaner), and clean out any debris from the cartridge.

We install the new filter halfway, break the plastic frame in half and insert the filter all the way.

We install the cover and throw on the terminal or put the fuse in place. Good luck to everyone and clean air in the cabin.

A cabin filter is used to clean the air taken from the street. It traps dust, pollen and other foreign bodies, and also reduces the amount of harmful impurities entering the car. The cabin filter can efficiently perform its functions only if it is replaced in a timely manner. In this case, compliance with the automaker’s recommendations for choosing consumables plays an important role.

Article number and cost of the original cabin filter and its analogues

The Chevrolet Lacetti, regardless of the size of the power unit, is equipped with the same cabin filter, article number 96554421. The price of General Motors branded products ranges from 600 to 1200 rubles.

The GM filter element has a plastic frame along the contour and has a special protrusion that facilitates installation and removal of the product from its seat. Many drivers note that this feature has a drawback. Due to the protrusion over the edge of the filter, debris sometimes spills out. For this reason, drivers are forced to seal part of the filter with foam rubber.

The General Motors signature filter is made from a specially developed synthetic fiber. It has antibacterial impregnation. It does not allow microorganisms to colonize the surface of the filter element. Thanks to this, the filter reliably serves the entire period prescribed for it and no foreign odors appear from it.

The table below shows the catalog numbers and costs of good non-original filters, which are in no way inferior in performance to a GM product.

Table - List of analogues of the Lacetti branded cabin filter.

Rules for choosing new equipment

A high-quality air element can prevent about 90% of harmful substances and environmental pollutants from entering the cabin. It is important that the design of the air purifier and the framing frame fully correspond to the dimensions of the seat and do not have any damage to its integrity. In Chevrolet Lacetti station wagons, the standard filter size is 223x189x25 mm in length, width and height, respectively.

It is worth noting that in some models of the interior air cleaner there is a place for breaking the frame. This is necessary in cases where the element fits into the grooves only if force is applied. The holes in the Lacetti are small and cannot always accommodate the filter along with the plastic frame.

The filter element for any brand of car is selected based on two alternatives:

• conventional synthetic fiber filters;
• with carbon impregnation.

The first option allows the air purifier to perform basic functions - to protect against contamination in the form of dust, lint and gases. The second option has additional options that will please the driver. The activated carbon included in the composition absorbs harmful substances and unwanted odors from the outside.

During the summer season, it is recommended to install carbon air filters, since during this period various bacteria, foreign odors and contaminants most actively enter the cabin.

When purchasing, it is also important to pay attention to the production of consumables. Its cost does not exceed 1,200 rubles, with the maximum price set for original parts. Manufacturer: General Motors. The original code for the cabin filter is GM96554421. The advantage of the originals is ease of use - the parameters are designed for a specific car model.

However, when looking for budget options, you can pay attention to suitable analogues:

• AMDFC22, the average retail price of which is 150 rubles;
• PARTS-MALL PMC003 – 230 rubles;
• TSN 9718 (TSN Citron) – 120 rubles;
• Goodwill AG628CF – 165 rubles;
• MANN CU 1719 – 600 rubles.

The presented analogues, like the original model, are conventional air purifier options. The cost of carbon filters may exceed the listed prices.

Which filter to choose - article numbers of originals and analogues

The manufacturer recommends installing original production parts on the model. They are of the required quality and meet the requirements class=”aligncenter” width=”510″ height=”597″

You can find an original spare part in the store using the following article number:

Not all users prefer original parts. This is due to the high price and average efficiency. Also, “original” consumables cannot always be purchased due to their absence in stores.

The article numbers of the most popular analogues are as follows:

Read more: Peugeot Partner rear beam pin

When to change, what interior to install

To perform scheduled maintenance operations, there are regulations, as well as manufacturer recommendations. According to them, replacing the cabin filter of the Chevrolet Orlando I J309 heating and air conditioning system should be done every 15,000 kilometers or once a year.

Considering that the operating conditions of the car in most cases will be far from ideal, experts advise performing this operation approximately twice as often, in spring and autumn.

Characteristic symptoms:

1. Windows often fog up;
2. the appearance of unpleasant odors in the cabin when the airflow is turned on;
3. deterioration of the stove and air conditioner;

They may make you doubt that the filter element is coping with its tasks and an unscheduled replacement will be required. In principle, these symptoms should be relied upon when choosing the correct replacement interval.

Suitable sizes

When choosing a filter element, owners do not always use products recommended by the car manufacturer. Everyone has their own reasons for this, some say that the original is unreasonably expensive. Some people in the region sell only analogues, so there is a need to know the sizes by which you can subsequently make a selection:

• Height: 35 mm
• Width: 204 mm
• Length: 240 mm

As a rule, sometimes analogues for the Chevrolet Orlando I J309 may be several millimeters larger or smaller than the original, there is nothing wrong with that. And if the difference is measured in centimeters, then of course it’s worth looking for another option.

Selecting an original cabin filter

The manufacturer recommends using exclusively original consumables, which, in general, is not surprising. They themselves are of good quality and are widely available in car dealerships, but their price may seem overpriced to many car owners.

Regardless of the configuration, on all first-generation Chevrolet Orlando (including the restyled version), the manufacturer recommends installing a cabin air purification filter, carbon with article number 1808246 (Opel 18 08 246) or General Motors 13503675 or GM 13271191.

It is worth noting that sometimes consumables and other spare parts may be supplied to dealerships under different part numbers. Which can sometimes confuse those who want to purchase an original product.

When choosing between a dust and carbon product, car owners are advised to use a carbon filter element. This filter is more expensive, but it cleans the air much better.

It is easy to distinguish - the paper filter accordion is impregnated with a carbon composition, and therefore has a dark gray color. The filter cleans the air flow from dust, fine dirt, germs, bacteria and enhances the protection of your lungs.

Which analogues to choose

In addition to simple cabin filters, there are also carbon filters that filter the air more effectively, but they are more expensive. The advantage of coal SF is that it does not allow foreign odors coming from the road (street) to penetrate into the car interior.

But this filter element also has a drawback - air does not pass through it well. GodWill and Corteco carbon filters are of fairly high quality and are a good replacement for the original.

However, in some retail outlets the price of the original first-generation Chevrolet Orlando cabin filter may be greatly inflated. In this case, it makes sense to purchase a non-original consumable item. In particular, cabin filters are considered quite popular:

Conventional dust cabin filters

• MANN-FILTER CU 2442 – technologically advanced consumables from a well-known manufacturer
• BIG Filter GB-9941 – popular brand, good fine cleaning
• TSN 9.7.764 is a good manufacturer with a reasonable price

Carbon cabin filters

• MANN-FILTER CUK 2442 – high-quality and thick carbon coating
• BIG Filter GB-9941/C – activated carbon
• TSN 9.7.765 – normal quality, affordable price

It makes sense to take a closer look at the products of other companies - they also specialize in the production of high-quality consumables for passenger cars:

• Amd
• Bosch
• Denso
• Filtron
• Fortech
• JS Asakashi
• Knecht Mahle
• Kortex
• Masuma
• Miles
• Raf filter
• SCT
• Sakura
• Stellox
• Valeo
• Zekkert
• Nevsky filter

It is quite possible that sellers may recommend replacing the Orlando I J309 cabin filter with non-original cheap substitutes with a much smaller thickness. They are not worth buying, since their filtering characteristics are unlikely to be at the proper level.

Procedure for replacing the cabin filter on a Chevrolet Lacetti

The cabin filter is an extremely popular and useful device that provides air filtration and is responsible for creating the most comfortable microclimate in the cabin. According to the manufacturer’s recommendations, the filter should be replaced approximately every 15,000 kilometers, and how to perform such an operation at home will be discussed in our material.

Cabin filter location

In Chevrolet Lacetti models, this element does not have the most convenient location and its dismantling can cause certain difficulties and inconveniences, especially for inexperienced car owners. It is located in the area of ​​the front passenger seat and is hidden by the glove compartment, which must be removed.

Tools and accessories

To work on replacing the cabin filter element, you need a simple tool kit, which includes:

• A set of screwdrivers, including Phillips ones;
• Ratchet 10;
• Pliers.

Removing the filter

First of all, to gain access to the cabin filter, you need to understand the glove box, that is, carefully remove it from its place. To do this, we perform the following operations:

• Using screwdrivers, unscrew all existing fastening screws;
• Unscrew the left and right hinges of the glove compartment;
• We dismantle the glove box, carefully so as not to damage the interior trim;
• We disconnect the special contact chips;
• Unscrew the four fastening screws and remove the small metal strip. Here you need to be prepared for some jamming, both of the fasteners and the bar itself - the assembly in this place, although of high quality, is ergonomic, but leaves much to be desired;
• This completes the first part of the work - access to the cabin filter is gained.

Replacement procedure

We move on to the next stage - we are directly awaiting the replacement of the filter element. We remove the protective hatch and see the element we need in front of us. Carefully remove it outside, so that the dirt and dust accumulated in it do not spill into the interior. Using a vacuum cleaner, we clean the casing, for greater reliability, passing along the internal surfaces with a rag. We install the previously prepared new filter in its place, after which we reassemble all the dismantled elements in the reverse order

We pay special attention to the quality of fastenings - screws must be tightened tightly, distortions and breakdowns are unacceptable

Conclusion

The work to replace the cabin filter has been completed. This operation is so simple and straightforward that even a novice driver can handle it without much effort, and it takes very little time. All you need to do is follow the recommendations described above and show a little patience. The result will not be long in coming.

When to change, what interior to install

To perform scheduled maintenance operations, there are regulations, as well as manufacturer recommendations. According to them, replacing the cabin filter of the Chevrolet Aveo II T300 heating and air conditioning system should be done every 15,000 kilometers or once a year.

Considering that the operating conditions of the car in most cases will be far from ideal, experts advise performing this operation approximately twice as often, in spring and autumn.

Characteristic symptoms:

1. Windows often fog up;
2. the appearance of unpleasant odors in the cabin when the airflow is turned on;
3. deterioration of the stove and air conditioner;

They may make you doubt that the filter element is coping with its tasks and an unscheduled replacement will be required. In principle, these symptoms should be relied upon when choosing the correct replacement interval.

Suitable sizes

When choosing a filter element, owners do not always use products recommended by the car manufacturer. Everyone has their own reasons for this, some say that the original is unreasonably expensive. Some people in the region sell only analogues, so there is a need to know the sizes by which you can subsequently make a selection:

• Height: 35 mm
• Width: 204 mm
• Length: 240 mm

As a rule, sometimes analogues for the Chevrolet Aveo II T300 may be a few millimeters larger or smaller than the original, there is nothing wrong with that. And if the difference is measured in centimeters, then of course it’s worth looking for another option.

Selecting an original cabin filter

The manufacturer recommends using exclusively original consumables, which, in general, is not surprising. They themselves are of good quality and are widely available in car dealerships, but their price may seem overpriced to many car owners.

Regardless of the configuration, on all second-generation Chevrolet Aveos (including the restyled version), the manufacturer recommends installing a cabin air filter, a dust filter with General Motors GM number 13271190 or a carbon filter with General Motors GM number 13271191.

It is worth noting that sometimes consumables and other spare parts may be supplied to dealerships under different part numbers. Which can sometimes confuse those who want to purchase an original product.

When choosing between a dust and carbon product, car owners are advised to use a carbon filter element. This filter is more expensive, but it cleans the air much better.

It is easy to distinguish - the paper filter accordion is impregnated with a carbon composition, and therefore has a dark gray color. The filter cleans the air flow from dust, fine dirt, germs, bacteria and enhances the protection of your lungs.

Which analogues to choose

In addition to simple cabin filters, there are also carbon filters that filter the air more effectively, but they are more expensive. The advantage of coal SF is that it does not allow foreign odors coming from the road (street) to penetrate into the car interior.

But this filter element also has a drawback - air does not pass through it well. GodWill and Corteco carbon filters are of fairly high quality and are a good replacement for the original.

However, in some retail outlets the price of the original second-generation Chevrolet Aveo cabin filter may be greatly inflated. In this case, it makes sense to purchase a non-original consumable item. In particular, cabin filters are considered quite popular:

Conventional dust cabin filters

• MANN-FILTER CU 2442 – technologically advanced consumables from a well-known manufacturer
• BIG Filter GB-9941 – popular brand, good fine cleaning
• TSN 9.7.764 is a good manufacturer with a reasonable price

Carbon cabin filters

• MANN-FILTER CUK 2442 – high-quality and thick carbon coating
• BIG Filter GB-9941/C – activated carbon
• TSN 9.7.765 – normal quality, affordable price

It makes sense to take a closer look at the products of other companies - they also specialize in the production of high-quality consumables for passenger cars:

• Amd
• Bosch
• Denso
• Filtron
• Fortech
• JS Asakashi
• Knecht Mahle
• Kortex
• Masuma
• Miles
• Raf filter
• SCT
• Sakura
• Stellox
• Valeo
• Zekkert
• Nevsky filter

It is quite possible that sellers may recommend replacing the Aveo II T300 cabin filter with non-original cheap substitutes with a much smaller thickness. They are not worth buying, since their filtering characteristics are unlikely to be at the proper level.

Installation instructions for the Chevrolet Lacetti cabin filter

It can be found under the instrument panel on the right side. We will consider an option in which the glove box is removed. In our opinion, this is much less difficult. Procedure:

1. You need to disconnect the negative terminal from the battery and the glove box light fuse.
2. We unscrew 5 screws above and below the shelf.
3. Carefully remove the box. Smoothly move it down and place it on the mat without touching the wires;
4. We disconnect the connectors - turn off the power to the backlight and limit switch.
5. We unscrew the four screws in order to remove the iron bar.
6. Next, use a screwdriver to unscrew the four screws that secure the plug.
7. Use the small “tab” to pull the device towards the mat until it touches the floor. Then we carefully bend it and slowly drag it to the side so as not to disturb or tear it. Accuracy at this stage is essential, firstly, so as not to leave part of the mechanism inside. Secondly, it can be reused after cleaning it first.

We evaluate the mechanism externally. If the outer side is not too dirty, you can blow it with a hot stream. Such manipulation will extend its use by another 5 thousand km.

The Chevrolet Lacetti fabric cabin filter should be dipped vertically in a special solution for 15-20 minutes, then dried with a hairdryer and inserted into the box. The mixture is prepared from a large volume of water and a regular cleaning agent. Thanks to such washing, the use of the device will increase to 20 thousand km. Installation:

1. Be sure to inspect the well itself for leaves, grass, and other debris accumulated in it. If necessary, use your fingers to pull out excess.
2. Before putting the part back, we conduct a visual examination of the air conditioner evaporator. Its wet texture attracts all kinds of dust, and for high-quality work its cleanliness must be 100%.
3. Turn on the oven at maximum temperature to blow out any remaining contaminants in the space of the future filter.
4. We also carefully insert the purchased or cleaned mechanism inside the cleaned cylinder. If there are no technological cuts on the device, we press it in the appropriate places (since it is inserted at an angle from the floor).
5. At the end, do not forget to fasten all existing parts of the panel with screws and self-tapping screws.

The climate in the cabin and the overall feeling after all the manipulations are much more pleasant. Since the whole action does not take much time, does not stain everything around, and the result of it is noticeable on the very first trip, you should not put it off for a long time. And may road trips be a joy to you, and may the air in the cabin be clean under any circumstances outside.

Problems when paying with bank cards

Sometimes difficulties may arise when paying with Visa/MasterCard bank cards. The most common of them:

1. There is a restriction on the card for paying for online purchases
2. A plastic card is not intended for making payments online.
3. The plastic card is not activated for making payments online.
4. There are not enough funds on the plastic card.

In order to solve these problems, you need to call or write to the technical support of the bank where you are served. Bank specialists will help you resolve them and make payments.

That's basically it. The entire process of paying for a book in PDF format on car repair on our website takes 1-2 minutes.

If you still have any questions, you can ask them using the feedback form, or write us an email at

Step-by-step instructions for replacing the cabin filter

To replace the cabin filter in a Lacetti with your own hands, you will need a minimum set of repair tools, which can be found in the driver’s basic arsenal. These include the following:

• positive screwdriver;
• ratchet wrench;
• pliers.

Before proceeding with the procedure, it is necessary to prevent the possibility of a short circuit and blown fuse. To do this, stop the current supply altogether by removing the terminals from the battery, or remove the F21 fan from the unit with a force of 15 A.

Replacing the Lacetti filter requires special resourcefulness compared to other cars, so it is recommended to remove the glove compartment drawer before starting work. It is enough to unscrew five bolts, open the lid and carefully lower the box.

The step-by-step instructions for installing a new air purifier include six key points. It is advisable to perform each of them with gloves:

1. Disconnect the contact chips responsible for illuminating the glove compartment and switch.
2. Remove the bar in the form of a metal plate.
3. Using a screwdriver, unscrew the air filter cover, which is held on by four screws.
4. Remove the old filter element from the grooves. If it hasn't been changed in a while, you may need to find a specific angle or break the housing to remove it.
5. Resume the power supply to the car to blow out the accumulated dust and dirt from the pipes and air ducts at maximum speed. Then disconnect the battery again.
6. Replace with a new air cleaner and assemble all parts in reverse order.

The cabin filter must be placed so that the handle is at the bottom, and the arrows indicated on the housing coincide with the direction of the air blowing system.

First option

The cover is attached to the panel using a small bolt and sealant. Take a convenient screwdriver, unscrew the screw and cut off the sealant. The cover is easy to remove.

Lightly pry the filter with a screwdriver and then remove the element. Carefully remove from the grooves. Over a long period of operation, a lot of dust accumulates, which can easily scatter throughout the cabin and fly into the air duct.

Next, a new dirt barrier is installed. Read the installation instructions. It is important to place the paper part on the correct side, otherwise the replacement will be useless. For convenience, manufacturers mark their products with arrows.

Carefully remove any remaining old sealant. Degrease the surface, apply fresh sealant and return the cover to its place. After making sure that everything is level, you can screw in the self-tapping screw.

For most car enthusiasts, removing part of the frill seems to be the best option, because there is no need to bother with sealant. There is also no risk of damaging the cladding when removing the old sealant. For many, this option is the fastest.

Lift the hood and unscrew the screws securing the frill. The element has three screws, which are located at the top.

Lift the plastic panel and carefully remove the filter material. Replace with a new one and replace the plastic. Screw the fixing parts into place.

In the video below you can watch the entire replacement process. From all of the above, it is time to conclude that in a Chevrolet Niva you can replace the cabin filter yourself. There is no need to have special skills.

1. When purchasing a new filter, pay attention to which vehicle it fits.
2. Inspect the integrity of the packaging. Damaged material will be useless during operation.
3. Purchase parts only from trusted stores to avoid purchasing low-quality goods.

There is no need to clean the filter frequently. It is safer for health to regularly replace the material.

Signs of a clogged filter

The biggest indicator that the cabin filter is clogged and needs to be replaced with a new one is the minimum throughput. Even at maximum speed, when the fan is turned on, virtually no O2 will enter the cabin, and dust and dirt will appear on the surface of the windshield.

On a Chevrolet Lacetti car, the heating and air conditioning system filter is replaced every 15,000 km. If you often drive in dusty areas, the replacement interval should be reduced to 1.5-2 times. If you notice that the filter is deformed, then it must be replaced, regardless of mileage.

Where is the filter located and what will you need?

Access to the filter is located inside the car. It is located behind the glove compartment, at the feet of the front passenger. To replace, we will need a new filter element, a 7mm wrench or socket, or a Phillips screwdriver. Some car enthusiasts perform this procedure by removing the glove box, but today we will analyze the process without dismantling it.

Replacement procedure

1. We look under the instrument panel, from the side of the front passenger's feet, where we see the filter cover of the air conditioning and heating system. It is attached to 4 bolts, which we need to unscrew.
2. After we unscrew them, remove the cover and put it aside
3. take out the filter element. It has special technological cuts, approximately in the middle, which are convenient because when pulled out of the grooves, it can be bent.
4. After you have removed the filter, turn on the ventilation and heating system at full speed in order to simply blow out large debris and dust from the system. Also, when blowing, change the distribution of air flows.
5. Installation is carried out in reverse order. You can also bend the new filter along the technological cut for easy installation of its grooves.

Where is the SF Chevrolet Lacetti located?

It will not be possible to find a cabin filter in a Chevrolet Lacetti sedan with the naked eye. It is carefully hidden behind the front panel of the cabin behind the glove box.

The cleaning element is hidden next to the forced ventilation fan. The easiest way to access it is if it is in the passenger seat.

When to change or signs of a clogged filter

Otherwise - after 12 months of use.

However, the consumable element may wear out in a shorter period of time depending on operating conditions. Frequent travel on country roads, in megacities or industrial cities with a large amount of exhaust emissions negatively affects the condition of the cleaning element. Therefore, the consumable renewal period can be reduced to 5-7 thousand kilometers.

Signs of an air purifier malfunction may include the appearance of various problems that were not observed before. Each of them is associated with filling the filter with dirt and dust, small particles can be as small as 1 nanometer. As a result:

• air is not able to sufficiently pass through contaminated filter openings and enter the cabin;
• ventilation is poorly blown and does not provide cooling in hot weather;
• the stove does not heat well, its operation is accompanied by unpleasant noise;
• windows often fog up because the air duct is not able to maintain the desired atmosphere in the cabin;
• a persistent musty odor appears.

Replacement frequency

According to General Motors recommendations, replacing the cabin filter on a Chevrolet Lacetti is required after 15 thousand kilometers. Car owners recommend reducing the interval to 5-8 thousand km, or installing a new filter element annually before the summer season.

Reasons to reduce the interval between replacements:

• in places where the car is operated, there is sand or other small foreign particles in the air;
• frequent trips in dense city traffic and stuck in traffic jams;
• the route runs along places where plants bloom;
• frequent travel near production with the release of harmful or fine particles;
• operating the machine on unpaved country roads.