As you know, the suspension is one of the most vulnerable components of a car, especially in Russia, where the quality of roads leaves much to be desired. Therefore, its elements often need to be replaced, which applies to a greater extent to the cars of the Volzhsky Automobile Plant, the parts of which are not always of high quality. In this regard, we present to your attention a rating of the best racks for a VAZ for 2022, which will help return the car to good technical condition for a long time. In it you will find shock absorbers of Russian and foreign brands. Products of all price categories are presented.
Delphi
Products from the British brand Delphi are the best racks for economy class VAZs. Their cost starts from 900 rubles, depending on the place of purchase and the model of the car. The shock absorbers are rigid and very reliable. The products of this brand are used by the famous automaker General Motors. And, according to some reports, AvtoVAZ recently started buying it too. It is not surprising that its quality is incredibly high. Shock absorbers give the car confident and predictable behavior on the road, even when taking sharp turns at high speed. They can easily withstand significant loads and temperature changes. Parts from this manufacturer are practically not counterfeited, and you can buy them in almost any auto store in the country. Despite all the advantages, the racks do not make movement very comfortable, as they are characterized by significant rigidity.
Rear shock absorbers for VAZ 2115, 2114 and 2113
The original rear shock absorbers are produced by the same SAAZ. There are no divisions depending on orientation (right/left), and in terms of rigidity they are not very different from the front ones. Reviews about original components are mostly positive, but they often complain about the lack of rigidity and ride height of these shock absorbers. Therefore, racks from a heavier ten are also sometimes installed on the rear wheels. The old part number is 21080291500400. The new number is the same as for Priora shock absorbers.
| Dimensions of rear original shock absorbers for VAZ 2115, 2114, 2113 | ||||
| vendor code | Rod diameter, mm | Case diameter, mm | Body height (excluding stem), mm | Rod stroke, mm |
| 21700291500400 | 15 | 45 | 364 | 230 |
Analogs of front shock absorbers for VAZ 2115, 2114, 2113
The reasons why replacement shock absorbers for VAZ 2115, 2114, 2113 are so popular are still the same - the desire to increase the stiffness of the suspension, as well as raise the rear a little. In particular, this is facilitated by the frequent use of these vehicles for business needs.
| Manufacturer | vendor code | price, rub. |
| Boge 4.1 | 30-N87-A | 2200 |
| At program | AT 5004-070SA | 1200 |
| Pilenga 3.5 | SH-P 2711-O | 1000 |
Boge 30-N87-A
Pilenga SH-P 2711-O
What shock absorbers are better to buy for VAZ 2115, 2114, 2113? If the car is practically not used on the farm for transporting goods, and is operated mainly in urban conditions (or close to them), then you can install the original SAAZ. An excellent analogue are gas-oil shock absorbers from Trialli.
According to the rating of shock absorbers for the VAZ 2114 on PartReview dated 04/07/20, owners prefer KYB 3.9 products. Manufacturers also stand out: PLAZA 4.0, SS20 4.1 and Bilstein 3.7.
It is also worth paying attention to the famous Russian shock absorbers from SS20 4.1. This brand is not so popular among owners of 2115, 2114, 2113, but the struts have good rigidity at low speeds, and at higher speeds they absorb bumps well. For Samara, the shock absorbers from the SS20 are the same as for the Lada Kalina, Priora or Vesta.
Fenox
Fenox is a well-known Belarusian manufacturer. His products were previously installed on VAZ “classics” and some other models. It produces inexpensive oil shock absorbers, the cost of which starts at approximately 1,200 rubles. It depends on the car model. The struts provide the car with confident behavior on the road and improve handling. They can withstand even very severe frosts well. The products are not designed for significant off-road use, but they perform well on relatively uneven roads and when accidentally falling into a pothole. The parts are practically not counterfeited, and you can buy them in many spare parts stores. It’s difficult to call them durable, but for careful drivers they can sometimes last quite a long time. Shock absorbers are available for all VAZ models.
Which racks are better to install on VAZ 2110, 2112, 2114 and 2115? Detailed analysis
Quite often you can hear from drivers the question of which struts are best to install on the VAZ 2110, 2112, 2114 and 2115. This is due to the fact that this structural element quite often fails. This happens due to the poor quality of roads and components. Therefore, every owner of any of these models, at least once, was faced with the need to replace the racks. This is not a difficult matter, but no one has any particular desire to do this work regularly. Therefore, more and more car enthusiasts are looking for an alternative to standard racks. This question is also of interest to tuning enthusiasts. After all, the original shock absorber struts are not designed for heavy loads.
SAAZ
The SAAZ company produces the best racks for the combination of price and quality. Products of this brand are now used at AvtoVAZ for many modern car models. But the brand’s line also includes parts for cars from previous years. They are considered to be of sufficient quality and provide confident handling in any road conditions. The shock absorbers cope well with road irregularities and bad roads. Ideal for fast driving enthusiasts. Spare parts are created specifically for Russian conditions by a domestic manufacturer. Their cost is very low and starts at about 1300 rubles with good quality. Some car owners find such racks to be harsh and uncomfortable. But this is probably a matter of taste. Sometimes they talk about the fragility of products. But many of them, especially those installed at the factory, last quite a long time. So it may depend on the quality of the roads or driving style. It is quite easy to buy them in almost any region of the country. But there are often fakes on sale. Therefore, you should only buy such parts from trusted places.
Original details
Which racks are better to install on VAZ 2110, 2112, 2114 and 2115? To answer this question, we must first consider why people are not satisfied with racks that are initially installed at the factory. It would seem that engineers specially created these components taking into account the characteristics of a particular car, and they should fit it perfectly. But in practice it looks different.
To begin with, the original racks are not very durable. They quickly break down, even when driving on almost perfect roads, and we don’t have many of those. Most of the time we have to cross holes and ruts. Therefore, the service life of native nodes is reduced even more. Most often, the oil seal fails and oil begins to flow through it.
Cars of this family are equipped with oil shock absorbers. There is another drawback associated with them, which is noted by almost all motorists. At high speeds the car sways. When cornering, you generally get the feeling that the car is entering it on two wheels. This is very annoying for those who like to drive fast. Moreover, this effect can be observed already at a speed of 100 km/h. It is, in fact, for these two reasons that drivers abandon original parts in favor of analogues.
BelMag
BelMag is a domestic manufacturer of inexpensive spare parts. It produces front struts for many Russian models and rear struts for most of our popular cars. With fairly high quality, the cost of such products is low. It starts at approximately 1,400 rubles, depending on the car model or place of purchase. Oil shock absorbers are very reliable and durable. They are suitable for fans of frequent off-road trips, for example, for Niva owners. The parts provide excellent handling on uneven roads and make the ride more comfortable and enjoyable. At the same time, they practically do not suffer from such extreme exploitation. The shock absorbers are a little soft. This can lead to excessive body sway when driving at high speeds. Therefore, some experts do not recommend spare parts of this brand for inexperienced motorists, since this feature can cause unpleasant situations on the road.
Bilstein
Bilstein is a well-known foreign manufacturer in the mid-price category. Previously, it was considered premium, but today the brand’s factories have appeared in Spain and China, where the products are not famous for their quality. It’s not worth buying such products, so it’s always important to check the country of production. It is noteworthy that spare parts of this brand are popular not only in Russia, but also in many other countries of the world.
The shock absorbers are incredibly durable and have balanced characteristics, making them suitable for different types of drivers and different needs. There are modifications for almost all car models. The brand has two product lines: standard and sports. The latter provides more confident handling and has a record-breaking service life. Such racks can easily withstand significant loads, but even standard parts have a very long service life. It often exceeds 300,000 kilometers. They are suitable for both regular roads and off-road use. And sports products are even suitable for participation in competitions. Spare parts of this brand cost from 2100 rubles. Products from Chinese and Spanish factories may have a lower price. Some car enthusiasts consider these shock absorbers to be too expensive, but this is not at all true. After all, you shouldn’t skimp on quality! In addition, you can find fakes on sale.
Boge
When wondering which racks are best to install on a VAZ 2114, you can consider products from the Boge brand. They are optimal in cost and quality. Their price is from 1800 rubles and above. It depends on the place of purchase and the model of vehicle. The manufacturer from Germany produces parts for the needs of many large foreign automakers. But at the same time, they are perfect for domestic cars and Russian conditions. Shock absorbers are known for their thoughtful characteristics and can really improve handling, which is noted not only by the drivers themselves, but also proven by professional tests. Some experts believe that products of this brand are superior in quality even to Japanese spare parts, for example, Kayaba. But the popularity of the Germans in our country is somewhat lower than that of the Japanese. The production is very extensive.
They produce parts for almost all cars, including, say, the VAZ 2112. The manufacturer has five main series: Nivomat (for cars that constantly experience significant loads on the suspension), Pro-Gas (two-pipe gas struts designed for ensuring maximum comfort and excellent handling in all conditions), Turbo24 (products for all-wheel drive vehicles used off-road), Turbo-Gas (struts for sports cars and speed enthusiasts), and Automatic (gas shock absorbers for relaxed motorists). The parts are famous for their excellent build quality and can withstand even very severe frosts. But sometimes their durability turns out to be a little lower than expected. They are found in most auto stores in the country. But you should buy them only in large and reputable retail outlets, since the number of fakes is very large.
Choosing racks for a VAZ: top best
10th place: SAAZ
The products of the Skopinsky Automotive Aggregate Plant are installed on LADA cars from the assembly line. The devices perfectly stabilize the car on high-speed turns and withstand harsh operating conditions. The company's product range includes a large selection of oil-type and gas-filled models. The products of the domestic brand fully comply with the requirements of Russian quality standards and ISO 9001. When asked which racks to install on a VAZ 2114 from the budget segment, this option will be the most successful. However, buyers online complain about the short service life. When driving aggressively or on bumpy roads, the struts fail after only 1 year of operation. Advantages:
- moderate cost;
- meets strict standards;
- wide choice of modifications and standard sizes.
Flaws:
- there are a large number of fakes;
- low durability.
9th place: Monroe
The next representative of the list comes from the USA, however, it is produced in Belgium. The company's products are famous for their high-quality cases and high-quality fillings, which, at a moderate cost, ensure good demand among car enthusiasts. The model range consists of 25 varieties of shock absorbers and struts installed on foreign and domestic cars. Thanks to strict quality control, the company eliminates the possibility of defects or hidden defects by 99%. When asking which pillars are softer to install on a modern-generation VAZ, it is recommended to pay attention to the Reflex modification. This is a gas-oil version intended for use on asphalt. The average mileage to failure is 30,000 km, which is quite tolerable. If a user is willing to sacrifice comfort for durability, the Van-Magnum generation is a smart choice. The racks are designed for off-road use and are distinguished by their increased range and durability, which guarantees up to 50,000 kilometers of driving range. The only caveat is the need to carefully select and search for trusted stores - there are a large number of copies of dubious origin on the market. Advantages:
- The optimum ratio of price and quality;
- wide range of models;
- good strength;
- long service life.
Flaws:
- a large number of fakes.
8th place: Fenox
In eighth place is the company whose parts are most common on classic Lada car models. If the buyer is interested in the dilemma of which racks to install on the VAZ 21099 and similar ones, it is recommended to contact this company. You can also find optimal solutions for modifications 2101-07, 2109 here. The brand produces front and rear struts of good quality. Oil-type shock absorbers provide sufficient directional stability and handle small things well in the form of small holes and paving stones. Also, the parts withstand frost tests perfectly and function properly at temperatures down to -25 degrees Celsius. However, the models are not intended for driving on primers - under conditions of critical overload and heating, the seals quickly wear out. So, it will be better for rural residents to pay attention to the next applicant. Advantages:
- moderate cost;
- wide range of classics;
- good quality;
- few fakes;
- perform well in the cold.
Flaws:
- short service life;
- Can't stand dirt roads.
7th place: DELPHI
Stiff, racing shock absorbers presented on the domestic market by a British company. The brand is the main supplier of suspension components for GM conveyors. If the user is going to improve the suspension of the VAZ 2110, which struts to install, the choice is obvious. The company has created a line of shock absorbers of suitable sizes specifically for the Lada. The models use a modern damper system and synthetic oil of optimal viscosity. The combination guarantees excellent directional stability and stable behavior in high-speed corners, which will protect a fast motorist from running into a ditch. It also uses advanced alloys, which minimizes the coefficient of thermal expansion and creates the necessary stability during overheating. The other side of the coin is its inability to cope with bumpy roads and sections of dirt roads. Due to the reduced cross-sections of the bypass valves, the struts wear out quickly. The second negative factor is the complete lack of comfort - the hard suspension makes your teeth “chatter” in some situations. Advantages:
- excellent stability of the car on the road;
- withstands long turns at high speed with minimal roll.
Flaws:
- price;
- lack of comfort while driving;
- wear out quickly on bad roads.
6th place: BOGE
The next representative is quite a bit inferior to the competitor who took fifth place in the ranking. Positive reviews of racks for VAZ and other domestic manufacturers indicate good quality assembly and good driving characteristics of the products. This kit can replace the standard stabilizer struts on a Lada X Rey or Largus. The brand is a supplier of parts to the assembly lines of the Volvo and VAG automakers, which indicates high quality products and modern solutions. Among the general model range, the company has two lines of shock absorbers, produced in Lada sizes.
- Turbo-Gas are rigid and reliable struts designed for racing loads. They are not afraid of primers and can withstand prolonged heating or dynamic loads.
- Automatic – moderately tight and comfortable shock absorbers, designed for normal “every day” use. They stand out among competitors due to their good comfort and good handling.
According to sources, for the maximum effect of the parts, you will need to install a full set of 4 pieces. When steaming, third-party units can reduce the efficiency of the units. Advantages:
- noticeable improvement in control;
- stable operation under temperature changes;
- sufficient choice of modifications;
- great build.
Flaws:
- there are fakes.
5th place: BELMAG
A popular domestic manufacturer that supplies parts to the assembly lines of Lada and GAZ companies. In 60% of cases, such racks on VAZ 2112/2115 or Kalina are stock. The series series of shock absorbers is distinguished by good reliability and good performance. The racks are moderately soft and reliably hold the road. They also perform well on primers. Hydraulic shock absorbers adequately withstand critical frosts and the “impeccable” condition of domestic roads. A wide network of branded stores and partners ensures the necessary distribution throughout the CIS countries. Among the negative aspects, users highlight excessive softness - on the highway at a speed of more than 90 km/h, the car may sway. Advantages:
- good assembly;
- holds the road well;
- moderate cost;
- wide use;
- durable design.
Flaws:
- excessive softness when speed increases;
- there is a marriage.
4th place: Kayaba
A Japanese brand introduced in Russia more than 20 years ago. The organization supplies parts to Toyota and Nissan factories, which guarantees excellent quality of all products - strict quality control eliminates differences in assembly for different countries. The manufacturer's range includes shock absorbers designed for urban and sports use. In Russia, 4 lines are especially popular.
- Gas-a-Just - reinforced single-pipe design is perfectly compatible with the harsh operating conditions of domestic roads. For Zhiguli car enthusiasts, this is a decisive factor during the purchase.
- MonoMax - the best front struts for VAZ. According to customer comments, they are distinguished by increased sensitivity on small bumps and irregularities. Thanks to the characteristics, the steering is radically improved.
- Kayaba Ultra SR is a lightweight version designed for sporty riding. Provides good handling when cornering on a flat road. The downside is excessive rigidity.
- Exel-G – the price of a set of racks for a VAZ 2115 starts from 15,000 rubles. However, the cost is completely justified. These are high-quality shock absorbers with good running performance.
Advantages:
- excellent quality;
- wide range of standard sizes;
- confident compatibility with winter frosts.
Flaws:
- the price tag is a little high;
- a large number of fakes.
3rd place: BILSTEIN
The top three is opened by a manufacturer popular all over the world. The manufacturer supplies products to leading automobile factories in Europe and the USA. If you have a question about what struts to install on Vesta to improve driving characteristics, you can safely contact the company. The brand has two types of shock absorbers.
- Gas-oil - designed for hard use in sports mode and aggressive driving. Holds turns and high-speed maneuvers perfectly. Among the disadvantages, users include a complete lack of comfort - the rigid suspension “shakes” the entire breakfast out of the driver.
- Oil racks are good quality racks for everyday use, they have sufficient comfort and stability.
Advantages:
- excellent build quality;
- good driving characteristics.
Flaws:
- there are fakes;
- high price tag.
2nd place: SACHS
The German brand, which supplies components to 17 countries, falls slightly short of first place. The main advantage of the product is the presence of a factory warranty for 2 years. For domestic VAZ cars, two types of shock absorbers are relevant. Everyday racks are marked with blue stripes, which indicates moderate rigidity and sufficient comfort of movement. Rigid, racing versions have increased stability and cornering performance. Among the negative factors, buyers highlight a large number of fakes - the popularity of the brand has a negative impact on original spare parts. Advantages:
- availability of factory warranty;
- stable behavior in difficult climatic conditions;
- excellent efficiency.
Flaws:
- a large number of fakes.
1st place: KONI
The rating of racks that are suitable for VAZ is headed by the Koni company. This is a popular brand represented on all continents. The Dutch brand provides a lifetime quality guarantee on all equipment supplied to Germany. However, the quality of the batches imported to the CIS is not inferior to the standard. FSD shock absorbers are popular among domestic car enthusiasts. The implemented technology allows the dampers to automatically adjust to driving conditions and speed limits. Buying racks for a VAZ 2114 or 2115 will be very expensive, but the expense is worth the effect of use. Thanks to the high throttle response of the suspension, the control and directional stability of the car are noticeably improved. However, experts criticize the need to install a full set of shock absorbers. When mounting racks on only one axis, the desired effect is completely lost. Advantages:
- excellent quality;
- high stability;
- long service life.
Flaws:
- price.
Monroe
Monroe struts will fit the VAZ 21099 and many other models of the domestic automaker. The cost of Belgian products in our country starts from approximately 2,300 rubles. They are famous for their incredible durability, endurance and reliability. The parts are very durable and significantly improve handling. They can be used for frequent travel on bad roads, but are not recommended for use in regions with very harsh winters. Shock absorbers allow you to overcome even significant unevenness more comfortably. The build quality is considered very high. When choosing products of this brand, you must take into account their purpose and not use racks that are not suitable for such use.
The line includes six varieties of products: Reflex (gas-hydraulic shock absorbers that provide incredible ride comfort, but do not have a very long service life), Original (gas or gas-hydraulic parts similar to factory ones, available in many types for different car models), Sensa-Trac (struts gas, giving confidence during sharp maneuvers, ideal for fans of high-speed and sporty driving), Adventure (spare parts for those who often travel on bad roads or minor off-road), Ride-Leveler (parts created for cars that often transport heavy loads, operated with trailers) and Van-Magnum (designed for the most serious off-road conditions, but their service life may sometimes not exceed 50,000 kilometers). The downside of the brand’s products is the lack of instructions allowing you to correctly select the appropriate modification. Therefore, it is advisable to buy them in the presence of an experienced consultant. Counterfeit goods are often found on the Russian market, so you should purchase products only from trusted places.
Front shock absorbers for VAZ 2113, 2114 and 2115
The front shock absorbers here are divided into right/left and have different part numbers. But their sizes are the same. As drivers note, these shock absorbers are moderately hard and hold the road well. If they are not used too intensively over uneven surfaces, the racks will last quite a long time.
Often, Samara 2 drivers install dozens of shock absorber struts on the front wheels (VAZ 2110). This car is heavier and the shock absorbers are a little stiffer. Therefore, when installing them, the front end rises slightly, and the suspension itself becomes a little stiffer. The table below shows the dimensions of the current original shock absorbers.
| Dimensions of original front shock absorbers for VAZ 2115, 2114, 2113 | ||||
| vendor code | Rod diameter, mm | Case diameter, mm | Body height (excluding stem), mm | Rod stroke, mm |
| 21700290500300 - left; 21700290500200 - right | 22 | 52 | 361 | 171 |
These shock absorber struts are also installed on Prioras of all modifications. Previously, slightly different part numbers were installed on the front wheels of VAZs 2115, 2114 and 2113: 21080290500200 - right, 21080290500300 - left. Now spare parts with these numbers are not sold.
Analogs of front shock absorbers for VAZ 2115, 2114, 2113
Numerous analogues are quite popular. Car owners are looking for substitutes to make the front suspension a little stiffer and increase ground clearance. In addition, the price of original spare parts is clearly overpriced. The following are the most popular analogs of shock absorbers VAZ 2115, 2114, 2113.
| Manufacturer | vendor code | price, rub. |
| Hola 4.1 | S503 – left; S504 - right | 2000 |
| Trialli 3.6 | AH 01159 – left; AH 01360 - right | 1900 |
| Pilenga 3.5 | SH-P 2771–O – left; SH-P 2770-O - right | 1700 |
Trialli AH 01159
Pilenga SH-P 2771–O
Tokiko
You can safely give preference to the products of the Japanese brand Tokico. The manufacturer produces products for many popular Japanese automakers. His products are widely known in many countries around the world. The shock absorbers are incredibly high quality and durable. They provide excellent handling and confident car behavior even on very rough roads. Help prevent skidding and similar dangerous situations even when cornering at very high speeds. The parts have a huge resource even in Russian conditions. They are able to adapt to the characteristics of the road surface. Shock absorbers installed on SUVs provide confidence and excellent handling even on significant off-road conditions. But such use may reduce their resource. This brand is not very popular in our country. Many motorists consider its spare parts to be expensive, although this is not entirely true. Their cost starts from approximately 2100 rubles. There is an excellent selection for most VAZ models. The products are practically not counterfeited, but sometimes it is quite difficult to find them on sale.
SS20
This is probably one of the most popular domestic companies among lovers of our cars. After all, this company, located in Samara, produces a fairly wide range of products for tuning domestic cars. In addition, these shock absorbers have the best price-quality ratio. We will look at 4 options for racks. It should be added that all these shock absorbers are offered both in standard and shortened versions:
- Highway
, these are quite hard racks. This indicator ensures optimal cornering at high speeds. This model is popular with buyers. Not very suitable for driving on dirt roads; - The standard ones
are distinguished by good performance, both in the heat and in extreme cold. Perfect for car enthusiasts from regions with harsh climates; - Comfort Optima
is the most popular rack of the entire line. This is due to their versatility. They are medium hard. Therefore, they are suitable for almost any road surface and driving style; - Sports
are the toughest stances. They are practically not intended for driving around the city. But at the same time, they perfectly keep the car from swaying in the sharpest and most dangerous turns.
You can look at their office for more details.
website https://autosystem.ru/ Conclusion
. As you can see, the choice of shock absorber struts for the “tenth family” is not limited to factory parts. All proposed options have their own characteristics. Therefore, the final choice of which racks are best installed on the VAZ 2110, 2112, 2114 and 2115 must be made by each car owner independently. Paying attention, first of all, to your driving style. And also on the features of vehicle operation.
KAYABA/KYB
KAYABA / KYB is a relatively young company from Japan, but it has already earned international recognition. Its products are used in the mass production of Japanese cars of many famous brands. Therefore, you can choose products of this brand without any doubt. The line also includes modifications for most other models of the Russian automaker. According to many domestic and foreign car enthusiasts and experts, these are the best racks in the premium segment. They are incredibly reliable, wear-resistant and durable. At the same time, their cost with such high quality is considered affordable.
You can buy such spare parts for 2,500 rubles and more, depending on the place of purchase and modification. The manufacturer produces several lines of shock absorbers designed for various needs. For example, common products for ordinary drivers come in three types: Exel-G (standard gas-oil, the cheapest), Premium (hydraulic shock absorbers of increased comfort), Gas-A-Just (gas for the rear wheels, recommended for cars regularly exposed to significant loads) . The sports line includes the Ultra SR, AGX (adjustable) and MonoMax series (suitable for professional motorsport competitions). It is noteworthy that owners of all VAZ models can choose suitable parts from almost any line. The brand is very popular in Russia, and therefore the number of fakes is very high. Because of this, you can only buy such spare parts from trusted physical and online stores.
Kayaba
The products of this manufacturer are in great demand among drivers. It is these shock-absorbing struts that are considered the standard of quality. At the same time, there are plenty of fakes on the market, so always order products only from official dealers. The range of products produced is large. 3 models of racks are perfect for the “tenth family”:
- EXCEL-G
is a gas shock absorber strut. It uses nitrogen. As a result, the knot turns out to be quite soft. This will be appreciated by those who like a comfortable and not too fast ride; - Ultra SR
are sports shock absorbers. With their help, the car holds the road perfectly. Possible use in conjunction with low profile tires. And also together with tires that have a radial tread pattern; - Premium
is a hydraulic shock absorber. It is a complete analogue of the factory one. But, at the same time, it is made of higher quality materials. And what is typical, it lasts much longer.
Finwhale
It’s not for nothing that Finwhale racks made it into our top. They are, of course, not cheap. The cost of the product can start from approximately 2800 rubles. But at the same time, German shock absorbers are famous for their unsurpassed quality, durability and incredible comfort and movement. They are very durable, efficient and perform well even in the harshest conditions. Spare parts are famous for their moderate rigidity. Many modifications are ideal not only for the highway and the city, but also for off-road or extremely bad roads. They are considered ideal for Russia. There are products for almost all domestic models. Moreover, many shock absorbers are suitable for several cars at once. They are universal.
The manufacturer has been selling its products in our country since 1998, so it is not surprising that it is well known to many Russians. All types of shock absorbers now come with an extended warranty of two years. In this case, the parts are serviceable. The Germans produce replacement cartridges for them, which can significantly extend their service life. These elements are much cheaper than new racks. And changing them is not at all difficult. The cartridges are currently presented on the Russian market. Unfortunately, spare parts of this brand are counterfeited much more often than parts from other manufacturers, so you should not buy them from dubious places.
Koni
Products of the foreign brand Koni are considered premium. It is actively used by numerous famous Western automakers. All parts undergo special tests at the factory, and their quality is controlled at the highest level. This achieves incredible efficiency and amazing durability of the products. They are able to successfully withstand up to 200,000-300,000 kilometers. Perhaps in our country, due to very bad roads, this figure may be somewhat lower, but it is still very high. At the same time, the manufacturer provides a long-term guarantee for its products. A distinctive feature of the struts is the ability for the car owner to adjust the level of rigidity. This ensures optimal driving comfort and reduces wear and tear.
The line includes many modifications, including those for the VAZ 2115, as well as other AvtoVAZ cars. Shock absorbers provide amazing controllability, stability and safety even when driving at high speed and high-speed cornering. They work stably and perfectly in any conditions. Spare parts are suitable for active and extreme use. They are adapted to Russian conditions. Experts recommend installing such racks only as a set, since otherwise there will be practically no effect from the product. They are very expensive. The minimum cost is now about 4,000 rubles, but it can be much higher, depending on the chosen modification.
Rack types
Before choosing specific brands and models of racks, you need to figure out what interests you. There are 3 types of racks. They have quite different characteristics. You should select them depending on where you travel most often and how this happens.
- Oil-based, sometimes called hydraulic, are quite soft. They are well suited for people who prefer a measured, not fast ride. And also for those who, for whatever reason, often drive on dirt roads;
- Gas ones are tougher. They prevent the car from swaying at high speeds and when cornering. But, using them on a primer quickly leads the suspension to a deplorable state;
- Gas-oil ones have average performance between both types of racks.
An article on the topic “Which shock absorber is better, gas or oil.”
Thus, knowing your driving style and the roads you drive on most often, you can easily choose the most suitable shock absorber struts for your case. Analogs
. So, you have decided to replace your original racks with similar ones. Let's assume that you have already decided which type of shock absorbers is ideal for you. All that remains is to select a specific product and purchase it. It should be noted that there are several well-known manufacturers of shock-absorbing struts for the “tenth Lada family” on the market. Therefore, let’s take a closer look at all the proposed options. Their positive and negative sides.
Sachs
We recommend paying attention to Sachs products. A premium brand from Germany produces such parts for almost all car models. At the same time, modern products are often universal. This is very convenient for car enthusiasts, since there is no need to select racks for a specific car. But this reduced their resource somewhat. But the cost still remained quite high. It is now impossible to buy them for less than 3,200 rubles in our country. A lower price clearly indicates a fake. By the way, products from this manufacturer are counterfeited very often. Therefore, you need to be careful when purchasing and not trust dubious offers. The brand is widely known all over the world. It is also popular in Russia. The Germans offer stands for all AvtoVAZ models.
Despite some disadvantages, their quality is still very high. The parts provide excellent handling in any conditions and significantly improve the maneuverability of the vehicle. They are wear-resistant and durable. All products are guaranteed for two years. There are three types of shock absorbers: SuperTouring (oil or gas, fully consistent with the factory specifications for a particular car), Sporting Set (a set of springs and struts created specifically for fans of a sporty driving style) and Advantage (products for maximum comfort and handling, one of the most expensive in the brand line).
Now you know which racks are best to install on a VAZ in 2022. What shock absorbers do you prefer? What guides you when choosing them? How often do you have to change these parts? If you have any questions or would like to share your opinion on the topic, write in the comments.
Is there a difference between struts and shock absorbers
Some people, even those who work with cars, confuse struts and shock absorbers. You need to understand that these are separate mechanisms that, although they are part of the same system, perform different functions. Thus, shock absorbers are designed to smooth out vehicle vibrations when driving and give it a “soft” ride. Racks are needed to secure the wheels to the body and support the entire weight of the car. With broken shock absorbers, the car is quite functional, although handling suffers greatly from this. If the racks fail, further movement is not possible.
It is also worth considering the load to which these parts are subject. Shock absorbers are loaded along their axis within their plane, while the struts are loaded along their entire circumference. In ninety-nine percent of cases, the breakdown of the racks indicates their complete failure; therefore, they are not subject to repair.
Thus, under no circumstances should shock absorbers and struts, which are different parts of the car, be confused. Confusion can arise due to the fact that a car's shock-absorbing system is sometimes sold assembled, and both struts and shock absorbers with a damper and spring are contained in one box. However, it is impossible to equate these mechanisms. Moreover, it is impossible to divide the struts into “gas” and “oil” ones, since this classification concerns shock absorbers as a whole, and not individual struts.
