Lada Granta displays temperature data on the instrument panel


Lada Granta displays temperature data on the instrument panel

As you know, AVTOVAZ removed the internal combustion engine temperature scale from the panel on the new Grants and Kalinas and left only the overheating light, but if it lights up, then this is already the beginning of the end.
Therefore, in luxury trim levels, the coolant temperature display was added to the on-board computer readings, and for all others, only a collective farm is assumed in the form of installing additional screens in place of button covers or external On-board computers. To fix this problem, you can update the dashboard firmware of Lada Granta and Kalina 2 cars.

First, we find out what version of the firmware is embedded in the instrument panel.

Now let's decipher them

The first numbers (2190 or 2192) indicate the car model (Granta or Kalina 2). This is followed by the numbers 00, 20 or 40, which stand for “standard”, “norm” or “lux”, respectively.

Now, using the table below, you can see if it is possible to flash your panel so that it displays the temperature.

FIRMWARE VERSIONS OF INSTRUMENT PANELS LADA GRANT AND KALINA 2

EquipmentFirmware versionDTNVDTOZHWhat is needed for firmwareNote
Granta Standard015NoNoChanging the display and working with a soldering ironOld board
029-040NoNoChanging the display and working with a soldering ironUpdated board
Granta Norma053, 060, 076, 087NoNoWork with a soldering iron or use modified firmware 2190-20_092_for_076
090, 091YesNoSuitable 092 and 009 or 012 from Kalina
092-095YesYes
Granta Lux032, 038, 042YesNoFirmware 046 is suitable
046YesYesShows the transmission number
047YesYes
Kalina Norma007YesNoSuitable firmware 009 or 012
014YesYesAdded on/off gear shift sound
Kalina Lux009YesYesFirmware 012 is suitable
012YesYesShows the transmission number
014YesYes

Here is an example of firmware for the Grants Norma panel. Initially, the panel is sewn with firmware 090

We take out the panel, remove the back cover, and connect the programmer to a special connector on the panel board.

We upload the new firmware and go try it in the car. As you can see, the version has been updated and now firmware 092 is installed

And using the buttons on the right switch we switch the on-board computer readings and see that the temperature display has appeared.

In preparing this article, information was used from

Source

New instrument panel

New instrument panel combination (from June 16, 2014)

If your car was manufactured after June 15, then the engine temperature should be displayed in the on-board computer. If it is not there, then you need to reflash the instrument panel.

We found ways to save money. And putting an additional indication is a collective farm!

Which button? If on-board instead of a button, then in almost any auto store that specializes in domestic cars!

You are probably talking about STATE1? So, my experience shows that STAT1 never shows the temperature accurately, sometimes the error ranges up to 13 degrees in the direction of underestimation!

I installed the additional indicator at a car dealership for 2500 rubles, purchasing it on June 9, 2014. Eh, I would have purchased the shipment after June 15, if only I had a computer on board)

I installed the indicator in the cabin for 2500 rubles on June 9, 2014, a necessary thing

Damn you are needed)) they write the red price is 600. ) And why are you lost) stop by and see the guys, they will stick you a flatbed for 35) I think they won’t refuse such a necessary person!)

The same bullshit generally blew my mind at first, also after 14 - oh, on a grant, I moved to an empty one, there wasn’t even a puff filter, damn economists...

I have a grant for 13 years. I reflashed the computer a couple of times. There is no trust in him. The check lights up and displays errors for items that are not in the car. Naturally, there is no temperature sensor either. What were you thinking? Don't know. The fan is electronic and needs monitoring. And you don’t know whether it works or not. Russia in a word. We hope so. And it is not known whether the overheat sensor will work or not. It didn't seem to catch fire yet. And if it ever lights up, in any case it is not good, this is already the limit, although the cause could have been established earlier if there was a temperature sensor. Thank God I have to change the car in a year, maybe by then there will be something new.

Tags: lada

Comments 29

I also changed the panel right now from 090 to 092, the temperature appeared)

hmm. you JUST need to change the panel for 3 thousand. flashing, haven't you heard?

Hmmm... Reflash the panel and rejoice www.drive2.ru/l/5008079/

You don’t need to buy a new device for three grand, but you need to install normal devices at the factory with the required indicators

Watch his other videos, it's even cooler))

The main thing is not to forget to post a “video” of how the jug gets hammered!

Mutaten. Why did they put it here?

The readings completely depend on the configuration of the car. I had a service grant, it was empty, there was nothing there in the tidy. But the standard configuration has almost everything.

Then it’s better to buy a tidy from Gamma.

It’s possible for free, but paying 3 grand is stupid, it’s better to install a bookmaker. Yes, and at the pick-up, I see the temperature is not always displayed, or the voltage or flow or temperature is displayed, it’s inconvenient.

Set it up and shows it. Here bk is a scoop

I was surprised by the statement about the operating temperature of 100 degrees, but then I saw a familiar face and turned it off.

I want to surprise her 103 and the vent turns on

Oh that's it, stop it

You have tales of the forest. go to the salon and find out and don’t cry at the pasta.

I like it and I’m interested in how you dealt with them, so I’m signing up and going there myself. and I understand you perfectly well, besides ripping out money, these salons do nothing more and thereby hurt (already sinking into the dirt) the reputation of AvtoVAZ

And I have the engine temperature on grant

You can also find the person who flashes them and give them to him for re-flashing. I have a friend, the price is around a piece.

You can also use this thing to buy ice cream for your children or take them to the zoo, and get the tidy done under warranty.

Or you can flash MMS and generally have a blast)

Or you can do it even simpler and a hundred times cheaper, buy a state X1 on-board vehicle and don’t worry about it, and it will show the temperature and errors, and reset errors, and a lot of other little things and will warn you about the dimensions of forgotten ones))))) and is inserted instead of a plug, a button, why throw away that kind of money for temperature readings)

This is just a side effect of the replacement. He changed the device due to a malfunction and under warranty

=)) well then everything is great)

I don’t understand how they officially refused the guarantee because you were filming a review of YOUR item?

This is all baby talk on the part of the official. I changed the panel, now, like all complex electronic devices, there is a one-year warranty. If it is serviced by them (and even if not by the officials, let them prove that the malfunction occurred due to the fault of the owner and not the factory), the warranty remains valid. Then I read somewhere... in the law there are only 3 things where it is forbidden to film, these are a court without the permission of the court, in correctional institutions, without the written consent of prisoners and other persons, I forgot the third. But also in churches with the blessing of the priest, the rector. embassies of other states. In general, you can film almost anywhere, in non-government organizations, and everywhere in general. and let them go through the forest

Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]