All about fuses for Volkswagen Golf 2-6: photo and video review

generation was produced with hatchback, station wagon and convertible bodies in 2008, 2009, 2010, 2011, 2012 and 2013. Our material will provide a description of the fuse and relay blocks of the Volkswagen Golf 6 with diagrams and photo examples. We will separately highlight the fuse responsible for the cigarette lighter. And in conclusion, we will offer for download a complete repair and maintenance manual for the Golf 6.

If the model generation is not suitable, then read the description for and accordingly.

Location and layout

Let's look at the diagrams and location of the power supply in Volkswagen Golf cars of the second, third, fourth, fifth and sixth generations. In all cases, the device is located on the driver's side under the instrument panel. The only difference is that in models of the second and third generations the power supply is located on a shelf under the steering wheel. And in models of the fourth, fifth and sixth generations - directly in the dashboard on the side where the driver's door comes into contact with the panel.

Volkswagen Golf 2

The location of the block in this vehicle model is on the left side in the area of ​​the driver’s seat under the dashboard. We invite you to familiarize yourself with the diagram and decoding of the power supply components.

Fuse box FV Golf second generation

Fuses numbered 17 and 22 are spare.

Volkswagen Golf 3

The power supply circuit on this vehicle model is similar to the power supply installed in the second version of the car, but there are some differences. Therefore, we will consider the circuits and purpose of power supply elements separately. Location: on the dashboard on the left side, on the shelf under the steering wheel.

Diagram of the power supply installed in Volkswagen of the third version

Volkswagen Golf 4

Below is a diagram and purpose of power supply devices for the fourth version of PV. The block itself is located on the left side of the dashboard, near the driver's seat. To access it and see it in person, you need to remove the cover using a slotted screwdriver.

Volkswagen Golf 5, 6

For models of the fifth and sixth versions, the power supply circuit will be the same. The location of the power supply is on the left side of the instrument panel, in the area where the driver's door comes into contact with the dashboard. Below is a diagram and description of all components.

Scheme

To carry out repairs effectively, it is extremely important to know the location and rating of all fuses. You can get this information from the block cover or from the diagrams presented below.

Fuse box Golf 2-3:

Golf 4 fuse box:

Fuse box Golf 5-6:

In general, you can repair the fuse box and replace its individual elements with your own hands without much difficulty. However, for effective repairs, it is very important to use the information presented above.

Fuse and relay box in the cabin

The interior fuse box in the Volkswagen Golf III is located near the pedal assembly and is covered with a decorative cover.

Location of the unit in the cabin

The schematic diagram and explanation are given below.

Appearance

Fuse and relay layout

Relay

Diagram number Switched circuit

Circuit breakers

Number on the diagram Rating Protected circuit/consumer

Actions in emergency situations Volkswagen Golf 7. Volkswagen Golf 7 fuses

Due to the constant improvement of the design of the car and its individual systems, as well as the fact that the installation of many fuses, including in the joint power circuits of several different consumers, can depend in a complex way on the presence or absence of certain additional equipment, it is necessary to comprehensively indicate All installation locations and ratings of individual fuses are not possible at the time of publication of this manual. The location of the fuses can be obtained from a Volkswagen workshop. One fuse can protect the circuits of several electrical consumers. And, vice versa: one consumer may have several fuses. Replace fuses only after eliminating the cause of their blown. If the new fuse quickly blows again, have the relevant electrical equipment checked by a workshop.

WARNING The vehicle's electrical system uses high voltage, which can cause electric shocks, severe burns and death! — Do not touch the ignition system wires under any circumstances. — Avoid short circuits in electrical equipment. Using improper fuses, repaired blown fuses, or shorting electrical circuits without fuses can cause fire and serious injury. — Never install fuses with a higher current rating than required. Replace blown fuses only with fuses of the same rating (color and markings must be identical) and size. — Do not use repaired fuses (so-called bugs)!

— It is prohibited to replace fuses with pieces of wire, paper clips and other improvised means!

Note To avoid damage to the vehicle's electrical equipment, before replacing the fuse, turn off the ignition, lights and all electrical consumers and remove the key from the ignition switch. — Using high amperage fuses may cause damage elsewhere in the electrical circuit.

— Protect exposed fuse boxes from dirt and moisture. Dirt and moisture in the fuse box can cause damage to electrical equipment.

Fuses in the vehicle Replace blown fuses only with fuses of the same rating (color and markings must be identical) and size. — Standard blade fuses (ATO®). — Small flat fuses (MINI®). — JCASE® fuses.

Front fuse box Opening the front fuse box Front fuse box cover: left, next to the steering wheel Open the driver's side storage compartment and pull firmly on the left side in the direction of the arrow. This may require some effort.

To install, insert the storage compartment into the opening of the front panel and press until it is clearly secured.

Fuse table in the front panel fuse box The table shows the locations of fuses that may be of interest to the customer.

The left column lists the fuse socket, then the fuse type, the amperage rating, and the last column shows the consumer(s) that receives supply voltage through that fuse.

Location of fuses in the front panel

Removal and replacement

The replacement process is identical for all versions of the FV. To replace, you will need a screwdriver or wrenches, depending on whether the power supply is attached to the body with bolts or self-tapping screws. Decide which tool you need, and you can start removing.

1. Using a screwdriver, disconnect the dashboard trim behind which the power supply is installed in your car.
2. Unscrew the screws securing the power supply to the car body.
3. Pull out the device: it will hang on the wires.
4. Take the new power supply unit and, one by one, disconnecting it from the old device, insert all the necessary wires into the connectors of the new power supply unit.
5. Install the new power supply in place by tightening the fastening screws and closing the instrument panel trim.

Marking of fuses on Geely MK detailed overview of the block with components

Geely MK fuses have sequential markings for each element in any of the blocks, which greatly facilitates the replacement and further maintenance of the electrical part of the vehicle.

To replace fuses on a Geely MK, you just need to check the number of the faulty fuse with the data from the table below and replace the faulty element. If any of the functions of the car does not work, just look at the list of tables and remove the fuse of the corresponding number.

Pinout of the PP module and Golf 3 relay

On the cover of the interior fuse and relay module there is a diagram of the designations of the protected elements. A special connector contains a tool for replacing fusible elements and spare fuses.

Deciphering the interior fuse module diagram for Volkswagen Golf 3
Protected electrical circuit or device Rating, АColor No.

Engine compartment PP

The PP motor block contains several high-rated fuses that protect loaded electrical circuits and elements.

Decoding the motor fuse module.

Pinout of the PP module and Golf 3 relay

On the cover of the interior fuse and relay module there is a diagram of the designations of the protected elements. A special connector contains a tool for replacing fusible elements and spare fuses.

Deciphering the interior fuse module diagram for Volkswagen Golf 3

Protected electrical circuit or deviceRating, АColor No.

Manuals for all cars

Lada 4×4 3D grasshopper Logbook euro fuse box in Niva

1. Brief technical characteristics of diesel engines 2. Engine 3. Power system 4. Clutch 5. Gearbox 6. Transmission 7. Front-wheel drive 8. Steering 9. Suspension 10. Brake system 11. Body 12. Electrical equipment 12.0 Electrical equipment 12.2. Generator 12.3. Starter 12.4. Headlight 12.5 Replacing the front turn signal lamp 12.6 Replacing the rear lamp lamps 12.7 Replacing the license plate lamp 12.8. Windshield wiper 12.9. Tailgate wiper 12.10 Adjusting the windshield washer jet 12.11 Instrument cluster 12.12 Warning lamp unit 12.13. Ignition system 12.14. Electrical diagrams Links to other sites

Additional fusible elements

In some versions of Volkswagen Golf 3rd generation vehicles, additional fuses may be used. The following additional elements are used in the interior fuse and relay module:

• rated 30A - power supply to the ABS system relay;
• rated 30A - power supply to the relay of the hydroelectric unit of the ABS system;
• rated 10A - air conditioning compressor for cars without climate control;
• rated 30A - interior ventilation motor with the ClimaTronic system;
• with a nominal value of 5A - controller of the ClimaTronic system;
• rated 5A - +12A power supply to the on-board network of a towed trailer.

For a diesel internal combustion engine, an additional PP for the engine warm-up system is used, with a rated current of 60 A. It is located separately, on the engine panel under the hood.

Block location

The 4th generation Volkwagen Golf has two PCB modules:

1. Engine block - located on the battery cover under the hood. To access the fuses, you need to release the two side latches and lift the cover.
2. Cabin module - located on the driver's side on the side of the dashboard. To access the unit, you must open the door and remove the cover.

The fuse description is printed on the cover of the passenger compartment module and replacement pliers are attached.

In addition to the two main blocks, several power fuses are located in separate places:

• fuse for turns and emergency lights - built into the hazard warning light button;
• The fuse for the air supply motor to the manifold is on the engine panel.

Relay and fuse layout diagram for Volkswagen Golf 3, Vento (1H)

The information applies to cars: Volkswagen Golf 3 / Volkswagen Golf 3 (1H1, 1H5) 1992 - 1998 Volkswagen Vento / Volkswagen Vento (1H2) 1992 - 1998

Layout of fuses and relays in the PDU Golf 3, Vento and their purpose.

Layout of fuses and relays in the PDU:

01 - 10A - Low beam of the left headlight 02 - 10A - Low beam of the right headlight 03 - 10A - License plate lamps 04 - 15A - Windshield wiper and washer of the rear window 05 - 15A - Wiper and washer of the windshield 06 - 20A - Heater heater 07 - 10A - Right side lights and tail light 08 - 10A - Left side lights and tail light 09 - 20A - Heated rear window 10 - 15A - Fog lights 11 - 10A - Left high beam 12 - 10A - Right high beam 13 - 10A — Bibikalka 14 — 10A — Reversing lights, heated washer nozzles 15 — 10A — Fuel cut-off valve, speedometer drive sensor 16 — 15A — Dashboard 17 — 10A — Direction indicators and emergency lights 18 — 20A — Fuel pump and heated lambda probe 19 - 20A - Radiator and air conditioning fan 20 - 10A - Brake lights 21 - 15A - Interior lighting, electronic clock, MFA, trunk light 22 - 10A - Radio, cigarette lighter

From myself: It seems to me that the fuse for the fastener is combined with the interior lighting and the MFA.

Number in the PDU - Number on the body - Purpose

01 - 13 - Air conditioning compressor relay 02 - 72 - rear wiper and washer relay 03 - 30, 32 - Injection and ignition system relay 04 - 18 - load relief relay, contact X of the ignition switch 05 - not used 06 - 21 and 22 - Relay breakers for turn signals and emergency lights, as well as trailer (No. 22) 07 - 33 - Headlight washer motor relay 08 - 19 and 99 - Relay for wipers and windshield washer 09 - 4 and 29 - Seat belt warning relay 10 - 15 - Jumper wire for PTF 11 - 53 - Sound signal relay (for a single-tone signal - jumper) 12 - 67, 80, 167 - Fuel pump or pre-heater relay (diesel) 13 - 53 - Pre-heating relay (22) or starter interlock relay 14 - 79 — ABS relay 15 — 79 — ABS hydraulic pump relay 16 — 79 — ABS relay 17 — ABS valve and pump fuses 18 — Electric seat and air conditioning fuses 19 — Not used 20 — Starter and reverse light relay 21 — Lambda heating coil relay probe 22 - Not used 23 - Not used 24 - Not used

Diagram and pinout of the rear side of the relay and fuse box

If you have not found information on your car, look at the cars built on the platform of your car. Most likely, the information on repair and maintenance will be suitable for your car.

Replacing fuses in the Geely MK unit step by step instructions

Volkswagen Golf Logbook What to do when the speaker wheezes

The procedure for replacing faulty fuses in any of the Geely MK units does not require specialized skills - the entire scope of work can be easily performed with one pair of hands under any conditions. To successfully replace fuses and fuses, all you need is pliers or a specialized puller for dismantling and a slotted screwdriver; a flashlight will also come in handy.

Servicing electrical units on a Geely MK will take no more than 15 minutes and is carried out according to the following scenario:

• First, you need to disconnect the battery under the hood of the car - otherwise, when replacing, voltage surges are possible, which will negatively affect both the overall service life of the car and can provoke expensive equipment: ECU units or measuring sensors;
• Next, you need to find the mounting block under the hood where the fuses will be located. In Geely MK, aimed at the European market, the unit will be located on the right side of the engine, slightly above the battery;
• The mounting block itself will be sealed. To ensure free access to the fuses, you will need to remove the locking latches using the tip of a slotted screwdriver;
• Then we find all the faulty fuses and dismantle the elements using a specialized puller and ordinary pliers. It is easy to identify failed fuses - there will be traces of melting on the body, and inside the element the fuse link will be completely deformed;
• Next, you need to gently press the landing cells with a new part until the characteristic sound of fixation appears;
• After successfully replacing all the elements under the hood, we move on to the unit in the vehicle interior. The Geely MK cabin unit will be located on the left side of the steering wheel in a niche covered with decorative plastic. The procedure for replacing fuses in the cabin is identical to the method described above.
• After completing the maintenance of the electrical part of the engine, you need to reconnect the battery and check the functionality of all functions in the car.

When starting the car for the first time after replacement, some elements may fail again - in this case, the electrical maintenance procedure will have to be repeated.

Volkswagen golf 3 fuses and relays

1 Air conditioning relay 2 Rear window wiper/washer relay 3 Electronic engine control unit relay 4 Main ignition circuit relay 5 - 6 Turn signal switch relay 7 Headlight washer control unit 8 Windshield wiper/washer intermittent operation relay 9 Seat belt indicator relay safety 1995 10 Fog lamp relay 11 Horn relay 12Pro Volkswagen: Volkswagen Golf | Autopedia wiki Fuel pump relay 13 Intake manifold heater relay 14 - 15 ABS pump relay 16 Reversing light relay (Ecomatic) 17 High beam headlight relay (Ecomatic) 18 Low beam headlight relay (Ecomatic) 19 Fuse (30A - air conditioning, Climatronic 2, 0/2.8 (1993) 20 Start inhibit switch relay 21 Oxygen sensor relay 22 Seat belt indicator relay (1995) 23 Vacuum pump relay (Ecomatic) 24 Thermal fuse (20A) – Power windows F1 (10A) Left headlight - low light, electric motors for headlight range control F2 (10A) Low beam - right headlight F3 (10A) License plate lamps F4 (15A) Rear door glass cleaner and washer F5 (15A) Cleaners, washers, headlight washers F6 (20A) Heater fan F7 ( 10A) Front and rear lights - right F8 (10A) Front and rear lights - left F9 (20A) Rear window heater F10 (15A) Fog lights F11 (10A) High beam - left headlight F12 (10A) High beam - right headlight F13 (10A) Sound signals F14 (10A) Reversing lights, washer nozzle heaters, central locking, electric door mirror, seat heater, cruise control system, electric windows F15 (10A) Speedometer, intake manifold heater F16 (15A) Backlight instrument cluster, ABS indicator, SRS indicator, sunroof, Thermotronic heating system F17 (10A) Hazard warning lights, turn signals F18 (20A) Fuel pump, heated oxygen sensor F19 (30A) Radiator fan, air conditioning relay F20 (10A) Brake lights F21 (15A) Interior light dumps, trunk light, central locking, sunroof F22 (10A) Radio, cigarette lighter fuse

Fuse box diagram

Dashboard

Assignment of fuses on the dashboard

Engine compartment version 1

Assignment of fuses in the engine compartment (low)

Pre-fuse block (version 1)

Engine compartment, version 2

Fuse placement in the engine compartment (high)

Pre-fuse block (version 2)

Relay holder on the onboard power supply control unit (on the left under the dashboard)

Relay holder above the onboard power supply control unit

Additional carrier relay

1 – Automatic glow period control unit -J179- (461) / (457)

Fuses under the hood

On vehicles with diesel engines, the electrical power supply circuit for the glow plugs is protected by a high-power fuse in the form of a fuse link.

p, blockquote 13,0,0,0,0 —>

p, blockquote 14,0,0,0,0 —>

On some models, when the radiator cooling fan is turned on, a fuse link can also be used.

p, blockquote 15,0,0,0,0 —>

Location of blocks on the diagram

There are a total of 2 fuse installation locations in the car.

Highly loaded elements for protecting the circuits responsible for powering the electrics of the power plant and its auxiliary systems are mounted in the engine compartment.

The interior module is less loaded. This part presents fusible links of internal equipment, control parts of power units and lighting fixtures.