Selection of shock absorbers for the hood and trunk of the Lada Granta. Installation Tips

• Appearance
• Lada Granta, Granta FL
• Hood and trunk supports

Sort:Show:

Trunk support TechnoMaster 415H for Granta, Granta FL se…

Pneumo-hydraulic telescopic trunk pusher with increased force 415N. After installing this stop, the trunk will open on its own, it will be enough just to open it slightly, and...

2 890 ₽

Gas hood stop for Grant, Kalina 2, Datsun...

Lack of hood support is a common problem with modern cars. The manufacturer considers this option not very necessary. But the presence of a hood stop greatly simplifies the life of the car..

1 190 ₽

Set of hood stops Grant FL…

A set of hood stops instead of the standard “poker.” Set: 2 shock absorber struts, 4 fasteners, a set of fasteners and installation instructions. Applicability: Lada Granta 2 (FL) hatchback from 2022..

2 190 ₽

Hood stops AutoUpor for Granta FL…

Gas hood stops AutoUPOR allow you to easily open the hood with one movement of the hand and automatically lock it in the upper position. Important information! These dynamic hood stops, in...

2 390 ₽

Bracket for fastening the hood stop Kalina 2, Granta...

The original hood support mounting bracket for the Lada Kalina 2, Granta, is intended to replace the failed standard one. Applicability: Lada Kalina 2 Sport (VAZ 2192) Lada Kalina 2 Cross (VA..

49 ₽

TechnoMaster hood support for Grant, Kalina 2…

Pneumohydraulic telescopic pusher that complements the standard rack.Applicability:Lada Granta liftback (VAZ 2191)Lada Granta sedan (VAZ 2190)Lada Kalina 2 station wagon (VAZ 2194)Lada Kalin..

1 690 ₽

Trunk support TechnoMaster 250N for Granta, Granta FL se...

Trunk supports with a force of 215N. After installing the trunk gas struts, the lid will open almost by itself; it will only be enough to open it slightly, and the pusher will do the rest. So ..

2 890 ₽

Gas struts for the trunk for Granta sedan, Granta FL sedan...

After installing the trunk gas struts, the lid will open almost by itself; it will only be enough to open it slightly, and the pusher will do the rest. In addition, emphasis is mandatory..

2 129 ₽

Hydraulic hood stops for Granta, Granta FL, Kalin...

Stops that lift the hood themselves are a rarity in modern cars and not only Ladas. These hydraulic stops can be installed independently on Lada Gran cars..

1 990 ₽

TechnoMaster hood support without bracket for Granta FL…

Stops that lift the hood themselves are a rarity in modern cars and not only Ladas. But you can install such shock absorber struts yourself. Set: 1 cap stop..

1 690 ₽

Shown 1 to 10 of 10 (total 1 pages)

Any of us knows that a heavy car is a guarantee of stability on the road, so engineers try to design even economy-class cars so that they have sufficient weight for safe movement. In addition, there are some parts that are mostly responsible for aerodynamics - the hood or trunk, and have large lids, which also adds weight to the car.

And, you see, it’s very, very little pleasant to be slammed with such a lid. For Lada Granta owners, danger awaits both from the hood and from the trunk, and in order not to be in the risk zone, we recommend that you study the assortment of our store and purchase such parts as stops (pneumo-hydraulic pushers, shock absorbers).

This device, thanks to its design, helps:

1. open and lift the lid without any extra effort
2. secure it and keep it open
3. Close the lid smoothly, without unnecessary noise and damage to the car’s paintwork.

The stops do not require special care and are very durable, and you will appreciate the benefits of their presence as soon as you need to open the trunk or hood.

Music: SineSpace – Always find me

In the standard version, the hood of the Kalina and Grants is held in the open position by a stop (popularly called a “poker”). If you often have to look into the engine compartment, the design can be modified by purchasing a special hood shock absorber, the price of which starts from 1,200 rubles. Want to save money? Install the hood gas stop yourself for only 100-200 rubles.

It's no secret that most of Grant's technical solutions migrated to Kalina. The hood of these two models is the same, so installing the hood damper is no different.

Required:

1. Gas stop from Chery with a force of 300 N (catalog number: S21-5605010) - 1 piece;
2. Furniture corner dimensions 60x30x20mm;
3. Bolt M8*16 - 1 pc.;
4. Nut M8 - 1 pc.;
5. Enlarged washer M8 - 1 pc.;
6. M8 washer - 2 pcs.;
7. Connecting nut (barrel) M8*20 - 1 piece;
8. Ball gas stop holder 21080-6308134-00 - 2 pcs.

Installation procedure:

1. Install an M8 bolt with a nut, a barrel and a ball stop holder into the technological hole near the left headlight;
2. Unscrew the hood fastening bolt and install the hood support bracket, having previously made a hole in it for the ball holder;
3. Insert the hood gas stop into the ball holders.

Do-it-yourself installation of a Lada Granta hood shock absorber

Gas type shock absorber

1. We place the car on a level platform, install wheel chocks, and activate first gear.
2. Open the hood and unscrew one nut on the right side that secures the hood.
3. We put on the support and tighten it with a nut.
4. On the right side, along the inner perimeter of the wing, unscrew the bolt (key set to “14”). Install the lower shock absorber support.
5. We put the shock absorber on the upper and lower mounts. Remove the metal support.

Standard support

From the factory, the Vesta hood is fixed with a regular support (rod), which is initially attached to the hood itself. But this is inconvenient for 2 reasons:

1. Sometimes your hands are full and you can hold the hood with one hand, but you can’t install a support with the other.
2. Many people believe that placing the rod on the hood is not entirely correct, since you can inadvertently catch the edge of the wing, which sometimes happens. In this case, it would be more appropriate to place it on the body.

Purchasing and installing hood stops on Vesta solves this problem - with them you only need to slightly push it up and it will lock itself.

up ↑–>

Installing a trunk lid shock absorber on a Lada Granta

Trunk lid gas struts

1. Place the car on a level platform and release the handbrake.
2. We open the trunk lid and support the structure with a wooden stand to prevent any inclination.
3. Remove the two torsion bars from the rear side of the trunk lid mount.
4. We fix metal supports with rubber bumpers onto the standard mounting arches.
5. There are holes on the side of the interior wall; screw on the lower support mount.
6. We put on the shock absorber.

By analogy, we will equip the opposite side.

The installation of trunk shock absorbers on the Granta Liftback is somewhat different from the Sedan configuration. We install accessories in place of standard ones. What makes the new pushrods different is the pre-installed springs at the end of the cylinder. When the trunk lid is lowered, the springs prevent it from slamming shut and lift the structure a few centimeters.

Related link:

Tips from experts on replacing windshield wipers with your own hands on a Granta liftback

Nuances of restyling

Having decided to retrofit the Grant with gas stops, you should pay attention to the fact that the hood stops for the pre-restyling and updated cars are different. For the current version of Granta, the stops are longer, and the gas pressure in their cylinders is slightly higher. Otherwise the sets are identical. The kit includes two stops, four brackets and fasteners.

The stops on the trunk lid have not changed with the restyled Grants. The kit includes a set of fasteners, the gas struts themselves - they are shorter than the hood struts - and six brackets, three on each side. In this case, they have a more interesting configuration, since the design is more complex. All brackets in the kits are cut carefully, without burrs, and painted evenly. Let's start installing the stops.

Review of Manufacturer Prices

*prices are current as of October 20, 2018.

Procedure for installing the gas stop

The sequence of actions is as follows:

1. We open the engine compartment of the Lada Granta and remove the plastic holder in the center of the engine shield, which holds the soundproofing sheet of the engine compartment. Nearby (below) there is another similar internal fastener; several bolts inserted into these holes will hold the lower fastener.
2. We disconnect the plug that holds the plastic engine casing.
3. We screw the mount to the bottom and, having inserted the bolt at 10 on top, tighten the nut from below.
4. We place emphasis on the lower mount.
5. We remove the casing.
6. If there is a hood deflector, we also remove it so that it does not interfere.
7. Place the top bracket directly on the car. It has technological holes into which the upper fastening brackets will be placed. After removing the plugs, we insert the brackets into the slots, screw on the bolts and washers (but do not tighten them).
8. Using a screwdriver, center the hole in the mount with the hole in the hood so that the hole does not move out during the process of tightening the bolts. Once the holes are aligned, you can tighten the mounting bolts.
9. We mount the trim and hood seal in place from below and fix it with plugs to make a smooth hole in it exactly for mounting the Lada Granta holder.
10. We lean the trim against it, mark the outline and cut out a hole with a sharp knife, then tuck everything in carefully and check all the joints. On occasion, you can install a hood deflector.

The gas hood stop on the Lada is installed by true connoisseurs of high-quality tuning. It provides a spectacular, effortless opening of the hood. The stop ensures safety when working in the engine compartment of a car.

Recommendations for choosing parts for installation

The cost of products from a domestic manufacturer is 10–15% lower than their foreign counterparts. The quality of parts made by different manufacturers does not differ much. It is not rational to overpay interest for a trademark.

Another thing is the type of pusher. As mentioned above, shock absorbers are made with oil and gas filler. Obviously, gas models are more durable, more reliable, but are 15% more expensive than their oil counterparts. The final choice is up to the owner of the technical device.

Advantages of stops

Vesta hood shock absorbers have many strengths.

Height

The hood lid rises high enough so that the owner of the car does not hurt himself on it. There are no difficulties with access to the engine compartment. And the presence of shock absorbers will not allow it to rise above the required level.

The presence of stops allows you to raise the hood high.

Convenience

You can lift the Vesta hood with minimal effort, in any weather, and not worry about the cleanliness of your hands or clothes.

Fast installation

The manufacturers of this accessory saved the owners of the Russian sedan from the need for independent alterations and improvements. In addition, shock absorbers do not require maintenance or adjustment.

Attractive design

With such a device, Vesta immediately looks more respectable.

One of the Drive members, Schoolboy11, expressed his opinion about the stops in a story about his car Lada Vesta Red Menace

up ↑–>

List of online stores, addresses of companies providing services

Related link:

Granta Liftback FL

Criterias of choice

It would seem that such a simple accessory would be easy to choose. However, it is necessary to take into account some features so as not to be disappointed with the purchase later.

High-quality products are made only from high-strength steel, which guarantees their reliability. They should also be galvanized and powder coated on top - this will ensure no corrosion in the future, regardless of weather conditions.

Installing stops does not require dismantling the standard rod, which is used as a backup option, as well as changes in the design of the car or independent modifications. Therefore, there is no need to worry about losing your right to warranty service.

Quality products are guaranteed for a period of 3 years.

up ↑–>

Reviews of companies

• Vladislav: a year ago I installed pushers on Granta at the Alta-Carter service station. The craftsmen did everything quickly and efficiently. My recommendations to Grantmakers.
• Ignat: after purchasing Grants, I replaced the torsion bars on the trunk with gas pushers. I ordered the service from the service station "EVAS-AUTO MSK". They work professionally, they have specialized equipment, they are experts at everything “100”.
• Sergey: my garage comrades recommended installing a gas pusher on the hood. I bought it at the Mnogofactors parts store. Good quality, reasonable prices.
• Gennady: I ​​drove for a year on standard trunk lid torsion bars and decided to switch to oil pushers. I bought it from World of Roads. Six months have passed since installation, no complaints, my recommendations.
• Kirill: I’m leaving my positive review about the auto parts store Prosport Performance OJSC. Professional advice, reasonable prices, bonus discounts.

How to buy a Grant hood and trunk stop?

The SkladExpress online store offers to buy Grant's hood stop at the most attractive price.

Gas struts for the hood and trunk - convenient and practical

Many automakers install steel stops on the hoods of their cars. For Western manufacturers, this is a fairly reasonable solution, because owners only have to open the hood to add anti-freeze.

In our conditions, steel stops mean that the hood cannot be opened without getting your hands dirty. The situation is similar with the luggage compartment. At almost any time of the year, its surface is covered with a thick layer of dust and dirt. This means that opening the trunk without getting your hands dirty becomes an impossible task.

The only solution to this problem is to buy Grant trunk stops. They will allow you to open the hood and trunk remotely, without using your hands.

Gas struts for Lada Granta - wide selection and attractive price

The SkladExpress online store offers to buy hood stops for the Lada Grant, as well as for other models of the Togliatti Automobile Plant.

In our catalog you will find a wide range of reliable and high-quality gas struts for the hood and luggage compartment from leading Russian manufacturers:

• AutoUpor is a specialized manufacturer of gas struts and shock absorbers for the entire model range of VAZ vehicles. The advantage of their products is high quality workmanship, a complete set of fasteners and detailed installation instructions;
• TechnoMaster - the company actively cooperates with the VAZ sports bureau, producing for it components for tuned sports versions of VAZ cars.

In our catalog you can not only buy assembled Lada Granta hood stops, but also individual parts for them - brackets, mounting brackets, etc.

All videos New videos Popular videos Video categories

Main newsThe State Traffic Inspectorate is looking for eyewitnesses!”>Results of the preventive event “Safe Road””>Fire safety rules during the spring-summer fire hazard period”>Verkhnyaya Salda firefighters took part in the All-Russian open lesson”>Fire inspections and briefings in churches before Easter”>Results promptly -preventive event “Tinting”>About new opportunities and prospects for the development of “Titanium Valley”>Salda residents are increasingly becoming victims of scammers from ad sites”>Representatives of the veteran organization of the Ministry of Internal Affairs of the Russian Federation “Verkhnesaldinsky” laid flowers at the Monument to the heroes-liquidators of the Chernobyl accident NPP”>Salda police ask citizens to hang up if money is discussed”>Let’s play 0707 = Tele2 = (:HoHmA:) we’re going to Moscow”>Compact irrigator RL 210 from Revyline with fast delivery to Sochi”>Can I buy it inexpensively laptop for corporate purposes”>Orthodontic wax “Revilane” in stock in Izhevsk”>How to gain the trust of the audience? How can an expert gain the trust of the audience at a webinar?”>Compact irrigator Revyline RL 650 is available in Orenburg”>Exclusive furniture to order”>Employees of the Belgorod linear department uncovered the theft”>The day must not come►SWAN: Chernobyl Unexplored►Walkthrough►Part 3″> Is it possible to do an MRI with dental implants? Is it possible to undergo an MRI if you have dental implants? pvpu2g, pvvng-ls, pvkp2g, asbl, sbshv, aabl and others in Russia”>I will buy fluoroplastic FUM tape, FUM harness, fluoroplastic film, surplus stock in Russia”>We buy power cable in Yekaterinburg, region, surplus stock in the Russian Federation”>Fluoroplastic F4 pipe, F4PN tape, I will buy from storage, unclaimed in the Russian Federation”>I will buy fluoroplastic powder throughout Russia, illiquid stock, from storage”>I will buy insulated wire SIP-2, SIP-3, SIP-4, SIP-5, unclaimed, illiquid stock in the Russian Federation” >Fluoroelastomer SKF-26, 26 ONM, SKF-32 I will buy all over Russia, surplus, unclaimed”>Photo LASTOCHKA-OMSK”>Photo”>Photo [email protected] “>Photo west o.”>Photo Olga Gantseva (Nazarova)” >Photo VALERY TSARKOV”>Photo Sergey Reva”>Photo God is love”>Photo lalapta108″>Photo Svetlana Vlasova (Verkhunova)”>Studio headphones32 min. backDarkside is an excellent choice for all hookah connoisseurs45 min. backSteroids1 h. 2 min. backShop for manicure and pedicure1 h. 22 min. backHow to choose the right tonometer?2 hours 58 minutes. backDestruction of cockroaches3 hours 22 minutes. backtax code3 hours 41 minutes backSights of Moscow5 hours 7 minutes backMotorcycles8 hours 27 minutes backoffice with normal output9 hours 52 minutes back Last comments Anna Volkova As it turned out, the task was not so simple: to get the product certified as quickly as possible. Somewhere the cost is just exorbitant...23 hours 49 minutes. agoanna0303good afternoon! I used this article as a recommendation and ordered a portable computer from the website https://my-gadget.com.ua/ May 12, 2022 15:42:39 Website creation in Krasnodar SeoZhdanovCleaning of apartments from the cleaning service https://total-cleaning. ru/ #totalcleaningru #cleaningcompany...May 12, 2022 11:31:07 rom kov Thanks for the article! May 11, 2022 15:18:02 Igor It must be said that the Zlato brand is very praised, at least by my friends who bought jewelry from this company , but what...May 10, 2022 12:53:24grischaeva From the company you can purchase certified desigo software, Siemens controllers, sensors and other equipment...May 8, 2022 22:31:27rom kov I will say that you definitely need to study as much information as possible and read reviews on the Internet about different bookmakers, by... May 7, 2021 9:40:28 rom kov Unfortunately, banks only issue loans to those with a high salary, local registration, and official income. If you don’t have this, then... May 7, 2022 6:46:35 Lilia Razumovskaya Nice young man and educational video! My niece just wants to go to study to become a dentist)?) It seems to me that this... May 6, 2022 9:34:35 Alex1985 I recommend ordering flowers in trusted stores, I buy from Roses Delivery. , I really like Dutch and Kenyan roses... May 5, 2022 1:49:44 pm Purchasing and installing gas hood struts on your Lada Vesta yourself will make servicing the car much more convenient and eliminate the need to install a standard bar.

• Content
• Standard support
• Advantages of stops
• Criterias of choice
• Where can I buy?
• Installation

It is usually necessary to open the hood of a car infrequently, however, AvtoVAZ’s decision not to install gas hood stops on the Vesta does not suit many people. However, this is the norm for more expensive cars, so the accusations of stinginess, which are sometimes hurled at the domestic automaker, are actually groundless.

Be that as it may, self-installation of gas stops on the Vesta hood has already become one of the most popular tuning options for this model.

The hood seal on the grant helps retain engine heat in the engine compartment for longer.

We will purchase a door seal from a VAZ-2108 from the store in advance; we will use it as a grant hood seal.

Don't forget to install a seal at the point of contact between the hood and headlights.

Now on the highway the oncoming flow of air will not blow into the engine compartment and will not cool the engine (especially important in winter!). Also, coupled with the heat and sound insulation of the hood, it allows you to retain engine heat longer and also contributes to its rapid warming up.

The Lada Granta has a number of disadvantages, just like any other car. One of them is the gap between the hood and the body (radiator grille and headlights), through which dirt gets into the engine compartment. This problem can be solved with a simple modification, which consists of installing an additional rubber seal.

On the Lada Granta, an additional hood seal can be installed in several ways in different places. To achieve maximum results, we recommend using all options in combination. You will need to buy VAZ 2108 or VAZ 2109 door seals, and then install it on the radiator grille.

The second attachment point for the additional seal from the “nine” is the hood soundproofing. We snap off the plastic clips, and then place the seal over the edge of the sound insulation.

Another D-shaped seal, which can be purchased at a hardware store, will help supplement the protection of the engine compartment from dirt. We glue it along the edge, the perimeter of the hood.

The process of installing the seal on the Granta hood is also shown in the video:

As a result, the seals will prevent dirt and dust from entering the engine compartment during rainy or dusty weather. Let us remind you that other modification instructions can be found in the Lada Granta Tuning category.

Join our club, share your first impressions of the car, start your blog on our website. In the near future we will hold a competition for the best review of the Lada Granta.

Do you have dirt under the hood? The fact is that the manufacturer, as usual, saved money and did not install a hood seal on the Lada Granta. To get rid of this, we’ll install it ourselves.

To protect the engine compartment from flying dust and dirt, we need a regular door seal from a number eight or ten.

Methods for installing a gas stop on Granta

There are two ways to set emphasis on Grant. In the first case, you can install the front struts on a brace (if there is one), in the second - install on a bracket.

Stretches or additional brackets are purchased separately depending on the buyer’s wishes, since the hood deflector performs both decorative and practical functions. It provides improved oncoming airflow while driving at speed. In order to set the focus on the Lada Granta, it is not necessary to visit a service station. Having minimal skills in handling the tool, any car enthusiast can perform the installation independently.

To install the gas stop on the front engine compartment of the Lada Granta, you need:

• emphasis;
• a pair of “13” wrenches (or a socket with an extension);
• wrench set to “10” and socket set to “10” (a head with an extension is required);
• 1 head for “8” with an extension (also a head is required);
• remover for plastic clips (or a knife, for example);
• a sharp blade or knife for cutting a hole in the casing;
• powerful screwdriver;
• fastenings;
• nuts, washers, engravers (from the kit or your own).

Recommendations

Comments 18

Did you drill holes in the corners? It seems that the M8 bolts do not fit into the finished holes.

Is there such a budget theme for the trunk?

It's in the trunk!

It's in the trunk!

Sorry, I thought you had a grant...

Why two stands, one won’t hold it?

Why is the mortgage that is attached to the wing in a single copy?

Only this wing played, maybe two, it couldn’t be worse!

Cool, I'll have to try it in the garage.

Great idea, bookmarked it!

At first I also thought of doing it in a similar way, but somehow I only got to the corners. Then I decided to take the ready-made ones anyway. And it’s great, the main thing is that the hood doesn’t bend!

the hood bends only if there is one stop

A handy thing))) I didn’t have any welding and I cut threads in the mounting plate, and the brackets are slightly different.

Bookmarked, definitely! +100500 to karma)

In the standard version, the hood of the Kalina and Grants is held in the open position by a stop (popularly called a “poker”). If you often have to look into the engine compartment, the design can be modified by purchasing a special hood shock absorber, the price of which starts from 1,200 rubles. Want to save money? Install the hood gas stop yourself for only 100-200 rubles.

It's no secret that most of Grant's technical solutions migrated to Kalina. The hood of these two models is the same, so installing the hood damper is no different.

Required:

1. Gas stop from Chery with a force of 300 N (catalog number: S21-5605010) - 1 piece;
2. Furniture corner dimensions 60x30x20mm;
3. Bolt M8*16 - 1 pc.;
4. Nut M8 - 1 pc.;
5. Enlarged washer M8 - 1 pc.;
6. M8 washer - 2 pcs.;
7. Connecting nut (barrel) M8*20 - 1 piece;
8. Ball gas stop holder 21080-6308134-00 - 2 pcs.

Auto-assistance

The central lock installed on the Lada Granta allows the driver to remotely close or open the doors of his car. This can be done either from the remote control or by turning the key in the driver's door lock. When you press the remote control button, an encoded radio signal is emitted, which reaches the receiver located inside the cabin. Having recognized the signal and compared it with the current code, the central locking, using electromagnetic locks, opens the door locks.

The presence of a radio signal in the central locking door opening circuit can lead to malfunctions in its operation if, for example, the car is stopped in an area of ​​strong electromagnetic interference (high-voltage power lines, broadcast towers of radio or television stations, etc.). Also, you need to be careful when handling the control panel, because there is an electronic circuit inside it that can be damaged if you accidentally drop the ignition key on which it is located. And the battery in the remote control must be changed in a timely manner, since if left without power, the electronics will not work.

The driver of a Lada Granta car should also know that when, for any reason, the terminals are removed from the battery and then installed, after some time in place, the central locking stops working fully. When you press the remote control button, only the driver's door will close; the remaining doors will have to be closed manually. To restore normal operation of the central locking, you need to remove the negative terminal of the battery for a couple of minutes, and then put it back in place.

Over time, problems may arise due to the fact that when closing the doors using the remote control, one of the three buttons of the passenger door lock does not go all the way down, which leads to the lock not working and the door remaining unlocked. In order to eliminate this malfunction, you will have to remove the inner door trim and fix the plastic assembly (so that it does not move) located below the lock button, which began to move slightly back and forth in the square hole under the influence of moving rods, when trying to close the door lock. The same problem with locking the door lock is caused by a slight deformation of the rod, onto the threaded part of the end of which the lock button is screwed.

Procedure for installing the gas stop

The sequence of actions is as follows:

1. We open the engine compartment of the Lada Granta and remove the plastic holder in the center of the engine shield, which holds the soundproofing sheet of the engine compartment. Nearby (below) there is another similar internal fastener; several bolts inserted into these holes will hold the lower fastener.
2. We disconnect the plug that holds the plastic engine casing.
3. We screw the mount to the bottom and, having inserted the bolt at 10 on top, tighten the nut from below.
4. We place emphasis on the lower mount.
5. We remove the casing.
6. If there is a hood deflector, we also remove it so that it does not interfere.
7. Place the top bracket directly on the car. It has technological holes into which the upper fastening brackets will be placed. After removing the plugs, we insert the brackets into the slots, screw on the bolts and washers (but do not tighten them).
8. Using a screwdriver, center the hole in the mount with the hole in the hood so that the hole does not move out during the process of tightening the bolts. Once the holes are aligned, you can tighten the mounting bolts.
9. We mount the trim and hood seal in place from below and fix it with plugs to make a smooth hole in it exactly for mounting the Lada Granta holder.
10. We lean the trim against it, mark the outline and cut out a hole with a sharp knife, then tuck everything in carefully and check all the joints. On occasion, you can install a hood deflector.

• We guarantee fast processing of your order during business hours (we work from 11-00 to 20-00, Saturday and Sunday are days off).
• We guarantee reliable packaging of your order (when sending it by Russian Post or transport company).
• We guarantee the fastest possible dispatch of your paid order (within 2-4 business days after receipt of payment).
• We guarantee a refund or exchange for another product (with recalculation) within 14 days from the date of receipt of the order (the product must be in good condition, without traces of installation, delivery costs are not reimbursed).
• We guarantee a free exchange of goods (transportation costs at our expense) if the purchased goods turn out to be defective.