The low beam on Kalina does not light up - causes of malfunctions and their elimination

Complete information on the electrical equipment of the Lada Kalina car, including the following modifications: VAZ 1118 - 5-door sedan (2004 to 2011), VAZ 1119 - hatchback (since 2006) and VAZ 1117 - station wagon. Also reviewed is the Lada Kalina Sport, a sporty version of the hatchback produced since 2008. There are diagrams of all blocks, including the location of relays and fuses, which allows you to carry out minor repairs of auto electronics and replace burnt-out elements yourself. At the end of the reference book there is a link to a PDF album of schemes.

General diagram of VAZ-1117, VAZ-1118, VAZ-1119

1 – right headlight; 2 – engine compartment lamp switch; 3 – sound signal, 4 – Lada Kalina starter; 5 – battery; 6 – generator; 7 – windshield wiper electric motor; 8 – left headlight; 9 – power window switch of the right front door (passenger]; 10 – power window motor of the right front door; 11 – right front door lock; 12 – connection block to the right front column; 13 – windshield washer motor; 14 – air temperature sensor; 15 – connection block to the injection system wiring harness; 16 – left front door lock; 17 – brake fluid level sensor; 18 – connection block to the left front column; 19 – right front door power window switch (driver); 20 – left front door power window switch; 21 – door lock switch in the switch block; 22 – electric window motor of the right front door; 23 – mounting block; 24 – immobilizer; 25 – power accessories control unit; 26 – instrument cluster; 27 – right side turn signal; 28 – glove compartment lighting lamp ; 29 – glove compartment lamp switch; 30 – brake light switch; 31 – ignition switch; 32 – lighting control module; 33 – steering column switch; 34 – left side direction indicator; 35 – connection block to the right rear column; 36 – rear door lock; 37 – rear window heating switch; 38 – reverse lock switch; 39 – alarm switch; 40 – heater motor switch; 41 – additional resistor; 42 – heater electric motor; 43 – block is connected to the left rear column; 44 – electric fuel pump with fuel level sensor; 45 – reverse lamp switch; 46 – handbrake sensor; 47 – cigarette lighter; 48 – reverse lock; 49 – connection block to the radio device; 50 – backlight lamps for heater control levers; 51 – Kalina illuminator; 52 – control unit for electromechanical power steering; 53 – interior lighting unit; 54 – right rear light; 55 – trunk locking motor; 56 – switch in the trunk lock; 57 – license plate lights; 58 – additional brake signal; 59 – rear window heating element; 60 – trunk lighting; 61 – left rear light

Elements of the instrument panel harness connection diagram

1, 3, 4, 5 — blocks of the tidy wire bundle to the front harness; 2, 8 - the same for the rear “pigtail” of wires; 6, 7, 9, 10 - continuation of the direction to the assembly unit; 11 — power supply for the lighting control device; 12 — set of instruments; 13 — toggle switch for the electric motor of the stove; 14 — power supply to the air supply box; 15 — ignition switch Lada Kalina; 16 — immobilizer block; 17 — block of the dashboard wiring harness to the ignition system wire bundle; 18 — cigarette lighter power supply; 19 — alarm switch; 20 — rear window heating switch; 21 — brake light switch; 22 — alarm light breaker; 23 — adjustment of computer modes ; 24 — windshield wiper control; 25 — VAZ horn switch ; 26, 27 — heating and ventilation control lighting lamps; 28 — glove box lighting; 29 — power supply to the on/off button in the glove compartment; 30, 31 — pinout for the standard radio; 32 — power supply to the electric motor of the stove; 33 — heater resistor network; 34 - electric amplifier control unit.

Checking and replacing the Kalina cooling fan resistor

Removing the additional fan resistor is done as follows:

  • put the car on the “handbrake”;
  • open the hood;
  • remove the ground wire from the battery;
  • remove the engine splash guard;
  • unscrew and remove the engine crankcase protection (if installed);
  • press the block latch and unplug the electric fan power supply wiring harness;
  • Using a Phillips screwdriver, unscrew the two screws holding the additional resistor;
  • move aside the resistor mounting bracket together with the block;
  • pull out the resistor.

Checking the resistor consists of two stages:

  • visual inspection of the integrity of the spiral;
  • checking the resistor winding for open circuit using an ohmmeter.

If a winding malfunction is detected, the resistor must be replaced with a new one. If the thermal fuse is faulty, then all you can do is replace it. To do this, you will need a soldering iron to remove the burnt fuse and solder a new one in its place. All that remains is to put the parts in their original places. Installation of the Kalina cooling fan resistor is carried out strictly in the reverse order of removal.

Detailed electrical diagrams of car components

Instrument panel wiring harness wiring diagram

1,2,3,4 blocks of the instrument panel wiring harness to the rear wiring harness blocks; 5,6 blocks of the instrument panel wiring harness to the blocks of the front wiring harness; 7 block of the instrument panel wiring harness to the block of the wiring harness of the air supply box; 8 block of the instrument panel wiring harness to the block of the front wiring harness; 9 lighting control module; 10 ignition switch; 11 on-board computer mode switch; 12 windshield wiper switch; 13 horn switch; 14 light signaling switch; 15 instrument cluster; 16 evaporator temperature sensor; 17 interior air temperature sensor; 18 air conditioner switch; 19 controller of the automatic climate control system; 20 heater damper gearmotor; 21 rear window heating switches; 22 alarm switch; 23 brake signal switch; 24 cigarette lighter; 25 electric power steering control unit; 26,27 connectors for the instrument panel wiring harness to the radio; 28 backlight lamp for the heater control panel; 29 lighting Lada Kalina; 30 mounting block: K3 additional starter relay; K4 additional relay; K5 relay breaker for direction indicators and hazard warning lights; K6 wiper relay; K7 relay for high beam headlights; K8 horn relay; K9 relay for turning on fog lights; K10 relay for turning on the heated rear window; K11 electric seat heating relay; K12 air conditioning compressor clutch activation relay; 31 heater motor switch; 32 electric heater motor; 33 additional resistance of the heater electric motor; 34 glove box lighting; 35 glove box lighting switch; 36 control unit of the automobile anti-theft system APS6; 37 driver airbag module; 38 passenger airbag module; 39,40 the instrument panel wiring harness blocks to the ignition system wiring harness blocks.

Electrical connection diagram for the wiring harness of the ignition system Lada Kalina 11174, 11184, 11194

1 oil pressure warning light sensor; 2 coolant temperature indicator sensor; 3 additional fuse box; 4 fuses for the electric fan of the engine cooling system; 5 electric fuel pump relays; 6 relays for the electric fan of the engine cooling system; 7 ignition relay; 8 relays 2 of the electric fan of the engine cooling system; 9 relay 3 of the electric fan of the engine cooling system; 10 electric fan of the engine cooling system; 11 throttle position sensor; 12 idle speed controller; 13 coolant temperature sensor; 14 diagnostic block; 15 ignition system harness block to the instrument panel harness block; 16 solenoid valve for purge the adsorber; 17 speed sensor; 18 ignition system harness block to instrument panel harness block 2; 19 mass air flow sensor; 20 crankshaft position sensor; 21 oxygen sensors; 22 controller; 23 rough road sensor; 24 diagnostic oxygen sensor; 25 ignition coil harness block to the ignition system harness block; 26 ignition coils; 27 ignition system harness block to ignition coil harness block; 28 spark plugs; 29 nozzles; 30 resistor; 31 air conditioning pressure sensors; 32 blocks of the ignition system harness and injector wiring harness; 33 phase sensor; 34 knock sensor.

Electrical connection diagram of the front VAZ-11184 wiring harness

1 headlight right; 2 right fog lamp; 3 speed sensor right front; 4 speed sensor left front; 5 air temperature sensor; 6 VAZ starter; 7 rechargeable battery; 8 generator; 9 blocks of the battery and starter harness and the front harness; 10 ABS hydraulic unit; 11 reverse light switch; 12 reverse lock; 13, 14, 15, 16 blocks of the front wiring harness to the blocks of the instrument panel wiring harness; 17 front wiring harness block to rear wiring harness block; 18 left headlight 11184; 19 left fog lamp; 20 electric washer motor; 21 beeps; 22 air conditioning compressor; 23 air conditioning fan electric motor.

Electrical connection diagram for rear wiring harness VAZ-11184

1 – 4 blocks of the rear wiring harness to the blocks of the instrument panel wiring harness; 5 rear wiring harness block to front wiring harness block; 6 side direction indicator, right; 7 left side direction indicator; 8 handbrake sensor; 9 blocks of the rear wiring harness to the rear right loudspeaker; 10 interior lamp; 11 reverse lock switch; 12 trunk light; 13 additional brake signal; 14 electric fuel pump module; 15 right lamp; 16 blocks of the rear wiring harness to the rear left loudspeaker; 17 rear window heating element; 18 rear wiring harness block to additional wiring harness block 3 (trunk lid); 19 rear wiring harness block to additional wiring harness block 2 (left rear door); 20 block of the rear wiring harness to the block of the additional wiring harness (right rear door); 21 left lamp 11184; 22 electrical package controller; 23 block of the rear wiring harness to the block of the rear additional wiring harness (left front door); 24 rear wiring harness block to rear additional wiring harness block 2 (right front door); 25 airbag control unit; 26 driver's seat belt pretensioner; 27 passenger seat belt pretensioner; 28 interior air temperature sensor; 29 right rear speed sensor; 30 left rear speed sensor; 31 electric heater for the right seat; 32 right seat electric heater switch; 33 left seat electric heater switch; 34 electric heater of the left seat.

Useful: VAZ-2109 diagram

Diagram of electrical connections of the additional rear wiring harness (tailgate wiring harness) and the wiring harness of the license plate lights of the LADA KALINA 11174 car.

1 rear window wiper motor; 2 additional brake signal; 3, 4 blocks of the rear wiring harness, additional to the blocks of the rear wiring harness; 5 block to the trunk lock electric motor; 6 trunk lock; 7 rear window heating element; 8 block of the rear wiring harness, additional to the block of the wiring harness of the license plate lights; 9 block of the wiring harness for the license plate lights to the block of the rear additional wiring harness; 10, 11 license plate lights.

Electrical connection diagram for rear wiring harness VAZ-11174

1 – 4 blocks of the rear wiring harness to the blocks of the instrument panel wiring harness; 5 rear wiring harness block to front wiring harness block; 6 side direction indicator, right; 7 left side direction indicator; 8 handbrake sensor; 9 blocks of the rear wiring harness to the rear right loudspeaker; 10 interior lamp; 11 reverse lock switch; 12 trunk light; 13 block of the rear wiring harness to the block of the additional wiring harness; 14 electric fuel pump module; 15 right lamp VAZ-1174; 16 blocks of the rear wiring harness to the rear left loudspeaker; 17 rear wiring harness block to additional wiring harness block 3; 18 rear wiring harness block to additional wiring harness block 2 (left rear door); 19 block of the rear wiring harness to the block of the additional wiring harness (right rear door); 20 left lamp; 21 electrical package controllers; 22 block of the rear wiring harness to the block of the rear additional wiring harness (left front door); 23 rear wiring harness block to rear additional wiring harness block 2 (right front door); 24 airbag control unit; 25 driver's seat belt pretensioner; 26 passenger seat belt pretensioner; 27 interior air temperature sensor; 28 right rear speed sensor; 29 left rear speed sensor 1174; 30 electric heater of the right seat; 31 right seat electric heater switch; 32 left seat electric heater switch; 33 electric heater of the left seat.

Electrical connection diagram of the front VAZ-11174 wiring harness

1 headlight right; 2 right fog lamp; 3 speed sensor right front; 4 speed sensor left front; 5 air temperature sensor; 6 starter VAZ-1174; 7 rechargeable battery; 8 generator; 9 blocks of the battery and starter harness and the front harness; 10 ABS hydraulic unit; 11 reverse light switch; 12 reverse lock; 13, 14, 15, 16 blocks of the front wiring harness to the blocks of the instrument panel wiring harness; 17 front wiring harness block to rear wiring harness block; 18 left headlight Lada Kalina; 19 left fog lamp; 20 electric washer motor; 21 beeps; 22 compressor; 23 air conditioning fan electric motor; 24 rear window washer motor.

Electrical connection diagram for rear wiring harness VAZ-11194

1 – 4 blocks of the rear wiring harness to the blocks of the instrument panel wiring harness; 5 rear wiring harness block to front wiring harness block; 6 side direction indicator, right; 7 left side direction indicator; 8 hand brake sensor Lada Kalina; 9 block of the rear wiring harness to the block of the additional wiring harness; 10 interior lamp; 11 reverse lock switch; 12 trunk light; 13 electric fuel pump module; 14 right lamp VAZ; 15 rear wiring harness block to additional wiring harness block 3 (trunk lid); 16 rear wiring harness block to additional wiring harness block 2 (left rear door); 17 block of the rear wiring harness to the block of the additional wiring harness (right rear door); 18 left lamp 1194; 19 electrical package controller; 20 block of the rear wiring harness to the block of the rear additional wiring harness (left front door); 21 rear wiring harness block to rear additional wiring harness block 2 (right front door); 22 airbag control unit; 23 driver's seat belt pretensioner; 24 passenger seat belt pretensioner; 25 interior air temperature sensor; 26 speed sensor right rear; 27 left rear speed sensor; 28 electric heater of the right seat; 29 right seat electric heater switch; 30 left seat electric heater switch; 31 left seat electric heater.

Wiring diagram for fog lights

1 - fuse in the assembly block; 2 — immobilizer output; 4 — rear fog lights; 4— external optics control unit; 5 — ignition switch; A - to power supplies.

Fan Resistor Functions

The Kalina cooling fan resistor is connected in series to the power supply circuit, which allows the engine to operate at different speeds. The resistance of the resistor changes depending on the temperature of the coolant and the load on the engine, and the current and speed of the fan motor change accordingly. This helps to eliminate sudden temperature changes and maintain optimal engine temperature in all engine operating modes. The fan resistor has a thermal fuse, which de-energizes the electric motor from overload (for example, when the shaft is jammed) and thereby protects the electrical wiring from fire.

Lada Kalina fuse and relay diagram

The main mounting block for the vehicle's relays and fuses is located on the left side, behind the exterior lighting control panel. By pulling the tab on the left side of the instrument panel, we open the cover of the mounting block.

AFuse function
110Instrument cluster, immobilizer (APS-6), reverse lamp switch, direction indicators, automatic climate control system controller (luxury)
230Window lifters Lada
310Ignition switch (terminal 30), hazard warning switch
420Wiper switch, wiper relay, front wiper motor, rear window defroster switch, airbag control unit, rear wiper, heated seat relay coil
525Heater, electric power steering control unit, windshield wiper switch (window washer)
620Sound signal
710Brake light switch, interior lighting, on-board computer (instrument cluster), light control module (LCM), immobilizer (APS-6)
820Heated rear window relay
95Side lights on the right side, glove compartment lighting, immobilizer (APS-6)
105Left side parking lights, license plate light, parking light indicator
117,5Rear fog lamp, immobilizer (APS-6)
127,5Right low beam, right light corrector gear motor, light switch, immobilizer (APS-6), light control module (LCM)
137,5Left low beam, left light corrector gear motor, light switch, immobilizer (APS-6), light control module (LCM)
1410Right low beam, high beam indicator
1510Left high beam VAZ
1610Right fog lamp
1710Left fog lamp, light control module
1815Seat heating relay
1910ABS, light control module (LCM)
2015Cigarette lighter VAZ 1117/1118/1119
2110Reverse lockout solenoid
2215Electrical package control unit, anti-theft system
23
247.5A/C compressor clutch relay
2530Electrical package control unit
2625ABS
275Spare
287,5Spare
2910Spare
3020Spare
3150Electric power steering
3240ABS
Car relay
R1headlight washer
R2Window lifters
R3Starter VAZ 1117/1118/1119
R4Auxiliary relay (rear window defroster, heater, wiper and washer switch)
R5Hazard warning and direction indicators
R6Wiper
R7High beam
R8Sound signal
R9Fog lights
R10Heated rear window
R11Heated seats
R12Air conditioning compressor

The engine control system fuse box is located in the center console - under the protective cover.

  1. Diagnostic connector.
  2. 15 A. Main relay circuits (winding of the cooling system electric fan relay, canister purge valve, air flow sensor, speed sensor, oxygen concentration sensor, ignition coil).
  3. 15 A. Fuel pump, fuel pump fuse.
  4. 15 A. Constant power supply circuits of the controller (ECU).

The relays are located in the lower right part of the console, where the fuses for the electric fan of the Lada Kalina cooling system are attached.

Before replacing the fuse, the cause of the blown must be determined and eliminated. To avoid failure of engine control system elements, do not install fuses with an increased current rating or homemade bugs. Sometimes the fuse thread remains intact, while the connection inside the fuse is broken. It is impossible to determine such a malfunction by eye, and then you can assess the condition of the fuse using an ohmmeter.

with color schemes of the Lada Kalina in high quality can be found at the link

Malfunctions of the Kalina cooling fan resistor

The electric fan only operates at high rotation speeds - The main sign that the additional resistor of the Kalina cooling fan is faulty. The electrical diagram for connecting LADA Kalina fans provides for the simultaneous activation of two blowing systems:

  • electric radiator cooling fan;
  • air conditioner cooling fan,

If at some point in time only one of them rotates, then we can conclude that the power supply circuit of the second one is broken. The same thing happens when the radiator fan does not spin after the engine warms up. There are several reasons for this phenomenon. This could be either a bad contact or a broken wire, or a faulty electric fan resistor.

Causes of malfunction of the Kalina fan resistor

The main reason for the failure of the additional resistor of the Kalina fan is the blown thermal fuse, which protects the electric motor winding and the power circuit from overload. In this case, it is necessary to repair or replace the Kalina cooling fan resistor. You can do the work yourself, it does not take much time, does not require high qualifications or special tools.

What is needed to check and replace

To remove, check and repair (replace) an additional resistor you will need:

  • ohmmeter;
  • crosshead screwdriver;
  • a set of keys;
  • soldering iron;
  • rosin;
  • solder;
  • a new resistor or part of it - a thermal fuse (16A and 180 degrees).

If the car has engine (crankcase) protection installed, it is better to remove it from a pit or on a lift.

Installation Features

As for installation, it is carried out in the reverse order of removal:

  1. First, the new mechanism is secured with eleven nuts.
  2. Then the wiring and electric motor are connected.
  3. After this, find the screw that secures the inner handle of the lock and tighten it completely.
  4. At the final stage of installation of the front joint ventures, the adhesive tape is removed.
  5. Next, through the hole in the rear door, a new window regulator is installed instead of the old one.
  6. Using a 10 mm wrench, you need to tighten all the corresponding screws and nuts. Use an 8mm wrench to tighten the nuts that secure the assembly. The tape is removed.

After completing the installation, you need to check how correctly the window opens and closes, whether there are any distortions and whether the mechanism as a whole is securely fixed. If mistakes are made, the problem must be corrected immediately so that it does not catch you at the most inopportune moment.

Sorry, there are no surveys available at this time.

Power supplies Lada Kalina

The on-board network of the Lada is characterized by direct current, the nominal voltage of which is 12 V. The electrical circuit of the VAZ 1118 is single-wire. The main elements of the Kalina network can be divided into 4 groups.

  1. Sources.
  2. Consumers.
  3. Protective elements.
  4. Sensors

Sources and consumers of electrical energy are connected by negative terminals to a metal body (“ground”), which acts as a second wire. Power for all electrical devices of the Lada Kalina car is supplied from two main energy sources: a generator and a battery. While the engine is running, power is supplied to consumers from the alternator. When the engine is turned off, the devices are powered by a battery. While the generator is running, the battery is charged.

A generator is an alternating current synchronous eclectic machine. The rotating crankshaft of the car rotates the moving element of the generator - the rotor. In this way, the mechanical energy of the crankshaft rotation is converted into electricity. The rotor shaft rotates in bearings located in the covers. The bearings are lubricated at the factory with a material that does not require replacement until the end of the generator's service life. The stationary element of the generator - the stator - is tightened with four bolts to the generator cover.

The generator is the main source of electrical energy in Kalina. It supplies power to consumers when the engine is running. The generator is equipped with a built-in rectifier and voltage regulator. The Kalina stator includes a three-phase winding. The permissible voltage range of the generator is 14.4–15.1 V. The gear ratio of the engine to the generator is 1:2.4. The maximum generated current is 85 A.

The leads of the field winding located on the rotor are attached by soldering to copper slip rings on the rotor shaft. The generator voltage regulator is a non-separable part; if it breaks, it requires replacement. In order to protect the Lada's on-board network from voltage surges during ignition, a capacitor is connected between ground and the positive valve.

When the engine is turned off, all electrical appliances in the Lada Kalina are powered by the battery. In addition to the fact that the battery is an auxiliary source of energy for consumers, it helps to start the engine. In the electrical circuit of the Lada Kalina, a parallel connection is used for the generator and battery.

The negative contact of the battery is connected strictly to the body of the Lada, and the positive contact is connected only to the “B+” terminal on the generator. Do not remove the battery while the engine is running. This can lead to voltage surges in the network, resulting in damage to circuit elements.

How to determine why the window regulator does not work

1. In the mounting block, check the power window fuse (F2, 25A) and relay (K2).

2. Remove the door trim and check the voltage at the power window motor terminals using a multimeter or a 12V test lamp.

If there is no voltage, then check the serviceability:

  • power window buttons
  • wiring (connector connection)
  • electrical package control unit (central body electronics unit or CBKE), which is used in the “luxury” configuration.

If current flows to the electric motor, but the glass does not move, then we check:

  • malfunction of the window lift motor (for example, the drive motor brushes are stuck/sticking, the plastic gear in the gearbox is worn out)
  • The window lift cable is frayed
  • glass is jammed (distorted)

The most common problems with power windows are:

  1. Window lift motor malfunction.
  2. Skewed, broken power window cable.
  3. Poor contact.

Let us remind you that on the website you can find solutions to other problems in the operation of the Lada Kalina 2, for example, squeaking clutch pedals.

Kalina ESP buttons on VAZ 2110

There are two types of Kalinovsky ESP buttons: low-current (multiplex) and power. To install low-current ESP buttons, you will need to install an electrical package control unit/electrical package controller (2170-3763040). This will also allow you to close the doors and windows of the car with the key (the control is built into the key), there will be a two-stage door opening, and the ability to control electric mirrors and door locks from the power window unit. In the case of ESP power buttons, everything is much simpler, no additional control units are required. You just need to connect the buttons correctly.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]