Useful tips for choosing alloy wheels for a VAZ 21099

Many VAZ-2109 owners, when tuning their car, come to the question of replacing standard wheels with wheels of larger diameter. At the factory, the “nines” are equipped with wheels with a radius of 13 inches and 175/70 tires. Since the tires have a high profile and the size of the wheels is quite small, the aesthetic image of the car is disrupted.

In this regard, there is a desire to install wheels of larger diameter and give your car more style and beauty. Is it possible to install such wheels and how will this affect the driving performance of the car? We will tell you about this in the article.

What wheels were installed on different bodies and configurations?

The VAZ-2109 car is a 5-door version of the VAZ-2108. Over the entire period of production, from 1987 to 2004, the car underwent 7 modifications, including options for export. Their disk parameters also changed, although the bolt pattern always remained the same. These differences were expressed in the choice of rim width, in the size of the offset and in three options for the diameter of the circle.

But in the factory, only wheels with a diameter of 13 inches were usually installed. Wheels R14 and R15 were considered only acceptable for installation. Here are the two main brands of rims that cars were equipped with on the factory assembly line:

• 5Jx13 ET35;
• 5Jx13 ET40.

The first numbers of the marking indicate the width of the rim, 13 is the overall diameter, ET35-40 is the offset in mm.
The standard factory disk design was a stamped steel product. Losing to its cast light-alloy competitors in a number of indicators, steel stamping has always been and remains durable, inexpensive and reliable. This is interesting: What tires are suitable for the VAZ 2112

Additional information markings on the disc

In addition to the disc width offset and disc diameter, you can often find other information.
The disc may indicate: - Date of manufacture. Usually a year and a week. For example: 0407 means that the disc was released after the 3rd week of 2007, that is, in the 4th week of the year. – SAE, ISO, TUV - the mark of the regulatory body indicating the standard by which the disc is manufactured. The marking indicates that the wheels comply with international rules or standards. – MAX LOAD 2000LB - a very common designation for the maximum load on a wheel (indicated in kilograms or pounds). For example, maximum load 2000 lbs (908kg)

- MAX PSI 50 COLD - means that the tire pressure should not exceed 50 pounds per square inch (3.5 kgf / sq. cm), the word COLD (cold) reminds that the pressure should be measured in a cold tire; - TOYOTA - wheel manufacturer .

Bolt pattern - dimensions

This wheel parameter for VAZ cars is marked with the following combination – 4×98. As mentioned before, this is a standard value for all models of domestic manufacturers.

It is deciphered quite simply. So:

• the first number (4) only indicates the number of fasteners provided to secure the disk;
• the second (98) means the gap between the holes (or rather their centers) in millimeters.

Many have noticed that the corresponding markings on foreign vehicles begin with the number 5. As you might guess - this should be understood this way - the disc is attached directly to the hub with exactly the same number of bolts.

If you draw a circle through the holes, you get the total diameter. In particular, the VAZ-2109 leaves the factory assembly line with wheels measuring 13 inches.

They use tires of the following marking – 175/70 R13.

When planning to purchase third-party wheels for your car, it is important to know which ones are suitable for your model. In particular:

• It is best to choose those that have the following dimensions - 5.5 by 13.5 inches;
• 5.5 by 14 is also not bad;
• It will be possible to install 6 to 14.

In theory, it is possible to attach even larger ones, but usually this requires certain changes to the design of the vehicle itself.

In addition to the previously mentioned number of attachment points and the distance between them, designated as PCD, there are also other dimensions:

• the diameter of the central hole (DIA) of the nine is 58.1 millimeters;
• offset (ET) is indicated as +40.

If you purchase discs with a lower ET value, the grip on the road surface will increase significantly, which means:

• controllability will deteriorate;
• fuel consumption will increase;
• wheel bearing wear will accelerate.

Bolt pattern compatibility table for Zhiguli wheels

Bolt pattern Chevrolet Cruze 1.3i HR51S 2001-2003

This table of correspondence of geometric characteristics to brands and modifications of domestic cars is given below:

Interior of rims for VAZ cars

The bolt pattern of VAZ wheel rims is a very important indicator of the model, which significantly limits the range of products offered for sale. If the driver suddenly takes a fancy to a disc that has different characteristics, he will have to completely change the design of the hub and install the studs in a new order. Experts say that such a practice is fraught with unpredictable consequences during the operation of the vehicle.

• Tire sizes from to , width from to and profile from to .
• Minimum tire size: 175/70R13, maximum:

Is it possible to install 4x100 disks?

This option can be seen quite often on the VAZ-2109. However, in reality this solution is not correct.

The problem is that the standard bolt pattern of the model in question differs relatively little from the factory one. It seems to many that these couple of millimeters do not matter. However, it is impossible to secure a 4×100 disk properly with ordinary bolts. There is a thickening on them (under the head) - it is this that does not allow the fasteners to be screwed in completely. Moreover, if you try to do this by force, most likely you will break the thread in the hub.

Therefore, they have to be secured with special eccentric bolts, and they have disadvantages that do not have the best effect on reliability. You should not forget about them if your own safety and that of your passengers is important to you.

What winter tires should I put on the VAZ 21099?

The optimal winter tires for VAZ 21099 are 175/70 R13, however, as a replacement option, you can use 185/60 R14 wheels. Here you can see that the profile height of such a tire is smaller, which means the possibility of damaging the disk is greater.

What kind of wheels can be installed on a VAZ 21099?

So, you can install R14 wheels on VAZ 2109, 2108, 21099, 2114, 2115. The disk parameters should be 5, 5.5 or 6 inches wide and have an offset of 35-40 mm. … Wheels with the following parameters are intended for ED/Exiv:

• width from 6.0J to 7.5J;
• departure from ET35 to ET45;
• radius R14.

What size tires for VAZ 21099?

Main wheel sizes for VAZ 21099:

The base wheels on the VAZ 21099 consist of the following elements: tires - 175/70R13, wheels - 5x13 ET 35 or 5x13 ET 40. Wheel parameters for the VAZ 21099: Wheel diameter: 13.0 (inches).

What are better 13 or 14 rims?

It depends on the rigidity of the structure (wheel). The fact is that 13 inches have a higher sidewall of rubber, and accordingly, the deformation when turning is also greater. 14 has a smaller radius, side cord of rubber, and therefore less deformation, this allows you to take turns at higher speeds.

What tires are suitable for the VAZ 2109?

The optimal sizes for installation on the VAZ-2109 are models 185/60 for R14 and 195/50 for R15. On the ninth fret model, it is beneficial to carry out external tuning by replacing wheels, since this method is budget-friendly.

What kind of wheels can be installed on a VAZ 21124?

VAZ 2112 - wheel and tire sizes

• Lada 2112 or in common parlance Dvenashka was equipped from the factory with 13 and 14-inch wheels. Stamped and light alloy. Factory tire sizes are 175/70 R13 and 175/65 R14. ...
• Number of mounting holes 4. Diameter of holes 98 mm Type cast

What kind of wheels can be installed on a VAZ 2110?

2110 is equipped with wheels with diameters of 13 and 14 inches. The width of tires varies from 175 to 185 mm, and the profile from 70 to 55%. Thus, the main sizes are: 175/70 R13, 175/65 R14, 185/60 R14. And alternatives: 185/65 R13, 195/50 R15 and 185/55 R15.

What is the wheel bolt pattern for the VAZ 21 099?

Bolt pattern 4×98 VAZ 21099 by year of manufacture: drilling wheel rims for 21099, guide to sales markets

What wheels can be installed on a VAZ 2115?

On the VAZ 2115, the manufacturer allows the installation of fourteenth-diameter wheels. The tire size allowed for installation is 185/60 R 14 or 175/65 R 14.

Is it possible to put tires on 13 to 14 rims?

The answer is clear - NO!

Is it possible to put 14 rims on Lanos?

For Lanos, the ideal size is 175/65/14. Narrow winter tires will allow you to better push through snow and slush before contacting the hard surface. Take stock steel wheels 5.5j. For a disk, it doesn’t matter if the height is 65 or 70.

What is the maximum wheel size that can be installed on a VAZ 2109?

As a result, more shortcomings appear: the vehicle’s ground clearance decreases, the maximum speed decreases, the speedometer begins to “twist”, and road grip deteriorates. The maximum wheel width on a VAZ 2109 is 195 mm. The next size is 205 mm and this is already exceeding the limit.

What size wheels are on the VAZ 2108?

Tire and wheel sizes for VAZ 2108

What drives can be installed

When planning to replace old steel wheels with alloy wheels, you should choose either original products or products from well-known manufacturers who care about the quality and safety of their products.

Alloy wheels combine the following useful properties: they are lightweight, practical to use, endowed with sufficient strength and have an attractive appearance, which is aimed at transforming the entire appearance of the car.

The most common among alloy wheels are aluminum products. This is due to the fact that they are resistant to corrosion, meet strength requirements and, in comparison with other alloy wheels, remain relatively inexpensive.

Titanium alloy is the most expensive option. It also meets all the technical specifications, but at the same time has a more attractive appearance. In third place is the option using a magnesium alloy.

The latest models from AvtoVAZ use wheels with a 4x100 mounting pattern. When installing them on a 4x98 hub, you should use studs with an eccentric to compensate for the difference of 2 mm. To install disks with other mounting patterns, you will have to use the appropriate adapters (spacers).

You must understand that installing wheels larger than 15 inches is impossible without interfering with the car’s design.

Advantages and disadvantages of stamped wheels for VAZ 2110

Initially, VAZ 2110 cars in the basic configuration are produced with stamped wheels. And many owners prefer not to change them due to a number of advantages that such discs have:

• high strength, which allows you to withstand aggressive driving style;
• high performance characteristics are designed for the condition of domestic roads;
• affordable price;
• ease of restoration of the stamped disk in case of damage.

Their main disadvantage is their outdated design, which spoils the look of the quite stylish and modern VAZ 2110 car. In addition, stamped wheels are heavy and susceptible to corrosion.

Maximum and minimum acceptable parameters of non-standard disks

The size of the wheel arches on the VAZ 2109 limits the possibility of installing wheels with a diameter larger than R15. It turns out that any non-standard specimen must fit into the dimensional frame of 13-15 inches. It is impractical to look for something smaller, and to install a larger diameter, you will need to increase the wheel arch, that is, change the body structure.

Limiting yourself to the given parameters of the arch, you need to look at the other indicators of the non-standard disk. To connect parts with different bolt patterns, you can use adapter spacers. In this case, the problem of incompatibility of the disk with the hub according to the holes is quite easily solved.

The main thing is to choose suitable fastenings. The width of the rim, according to the limits set by VAZ designers, is limited to 4-7 inches. Exceeding these parameters may impair vehicle handling and raise questions during registration.

The permissible disc overhang is directly related to its width and design. In the factory assembly, this figure ranged from 30 to 45 mm. You can change the offset using spacers.

But you need to remember that as the offset decreases, the track width increases, and wide tires may exceed the established overall dimensions of the vehicle. The central hole of a non-standard disk must be at least 58.5 mm.

Although the options for replacing disks on a VAZ-2109 are limited to certain parameters, there are still quite a lot of them. But, first of all, you should still pay attention to original products that are maximally adapted to the given car. This is simpler, safer, and more profitable from a financial point of view.

Tired of paying fines? There is an exit!

Forget about fines from cameras! An absolutely legal new product - Traffic Police Camera Jammer, hides your license plates from the cameras that are installed in all cities. More details at the link.

• Absolutely legal (Article 12.2);
• Hides from photo and video recording;
• Suitable for all cars;
• Works through the cigarette lighter connector;
• Does not cause interference to radios and cell phones.

Order with a discount

This is interesting: How to store tire pressure on rims

Bolt pattern VAZ 2109 1.6i 2109x 1998-2006

Standard disk sizes

The main technical characteristics of the rims of any car, including the VAZ-2109, are expressed by the following parameters:

• Diameter. This refers to the size of the rim in inches, excluding the tire.
• Rim width is the size of the tire seat in inches.
• The size of the central hole for the hub.
• Bolt pattern is a parameter indicating the number of holes and the diameter of the circle connecting their central points.
• Overhang is the distance between the hub mounting surface and an imaginary plane passing vertically through the middle circumference of the disk.

For the VAZ-2109, two parameters were always the same:

• The central hole is 58.5 mm.
• Bolt pattern - 4x98.

The wheels are manufactured in three versions: R13, R14 and R15. Other factory parameters, taking into account the corresponding tires, are shown in the table.

Information on wheel bolt patterns on domestic VAZ vehicles

How to determine wheel rim bolt pattern, compatibility table

All VAZ cars from the very foundation of the plant to the present day had only 3 main types of bolt patterns, since most modifications were made on a single platform, only their appearance changed. The bolt pattern for most Lada models looked like this:

The smallest representative of the automaker - VAZ 1111, popularly called "Oka", was produced in the Russian Federation for 20 years - from 1987 to 2008. Considering that the weight of this especially small class car was only 975 kg, and the load on the wheel was less than 250 kg, Oka became one of the few representatives in its class for which a bolt pattern of 3 studs was used.

It was quite problematic to find a similar wheel size on the market, so stamped products with a radius of R12 and R13 were often re-drilled in order to successfully fit on the hub.

Bolt pattern VAZ 2107 4x98

The vast majority of models of the AvtoVAZ concern, starting from 2101 and ending with the Lada Priora or Kalina, were produced from the assembly line in the form of sedans, liftbacks, hatchbacks or station wagons of the compact or subcompact class.

Starting from 1966, when the concern released its first “penny”, and ending in 2015, the wheel bolt pattern for these cars was 4x98 mm, the diameter of the central hole was 58.1 mm.

The most popular Lada models today, for which wheels with a 4x98 bolt pattern are still sold, are VAZ 2106, 2107, 2109, 2110, 2112, 2114.

The latest VAZ models, such as Vesta, Granta and X-Ray, produced since 2015, have a wheel pattern as close as possible to the international standard for compact cars. This parameter on the specified modifications is 4x100.

Among all the products of the AvtoVAZ concern, such models as the VAZ 2121, or the classic Niva and all derivatives of this SUV have always stood out: the 5-door Taiga, Chevrolet Niva and other models. Due to increased loads on the hubs and wheels due to unsatisfactory road conditions, for which all parameters of the Niva were designed, these compact all-terrain vehicles traditionally had a disc bolt pattern of 5x139.7, with a central hole diameter of 98.5 mm.

These increased indicators allowed the wheel to freely resist bending moment, absorb large loads when the center of gravity is shifted to one side when moving on an inclined plane or when the wheels are forced to hang, and also allowed the car to transmit more torque to the tire treads when driving uphill without the risk of breaking parts .

Wheels for VAZ 2114

Tabular characteristics for selecting disks

Diameter R13

Diameter R14

Diameter R15