How to remove the courtesy lamp of a VAZ 2114 car interior

In this article we will look at how to make illumination of the underbody of a VAZ 2108-21099. There are two types of lights - the one that flashes from the audio system signal and the one that glows constantly. The first illumination depends on the operation of the radio (what kind of music is the same as the illumination).

The lighting of the standard 10's navigation light is not as bright as we would like. In order to make the interior lighting brighter, you can install an additional lighting device in the car interior. I'll tell you in more detail how to do this..

To improve the interior lighting of the Auto VAZ 2110, we have already considered options for improving the driver’s lighting, as well as changing it to the brightest one. Now I’ll show you the option of installing another lighting device above the driver and passenger, which will be located next to the standard navigation device. Continue reading →

You will find the answer to this question in the photo report on the modification of the backlight of the BSK Auto VAZ 2110.

In order for the BSK block to be illuminated, the drawing of the machine must be visible. Inserts in BSK modules are available with or without translucent patterns. Continue reading →

Almost all VAZ 2110 models use a Kalina steering wheel, so I’m showing you how to modernize the steering wheel and install the remote control in the central part of the steering wheel with your own hands.

Unlike the steering wheel of the Auto VAZ 2110, the Kalina steering wheel has dozens of places where you can put the remote control buttons.

Another element of interior lighting tuning is the ignition switch illumination. If you illuminate the lock cylinder in the same color as the entire interior lighting, the effect will be pleasing to the eye.

The standard illumination of the ignition switch of the Auto VAZ 2110 is a light bulb that shines directionally into the lock cylinder.

The simplest thing is to change the lock illumination and replace the bulbs with an LED of a suitable color. The most difficult part in this process is disassembling the control column and removing the ignition switch. Continue reading →

In this article I will share my experience of changing the color of the key backlight on the instrument panel of a VAZ-2110. I will consider the principle on the rear fog light switch.

To do this, pull the body and the moving part to the sides. Then we will see the incandescent lamp in the housing. Continue reading →

Let's continue the topic of interior tuning with another illumination of the VAZ interior with LEDs. In this article we will highlight the air ducts of the VAZ stove. At first glance, this modification will seem easy, but there are some subtleties here. Let's see how to properly illuminate the deflectors of an Auto VAZ 2110.

As I said earlier, it is not easy enough to make the backlight; you need to choose the color well and place the backlight well, observing all the rules for connecting LEDs.

The lighting of the air ducts must be in harmony with the lighting of the entire cabin, then the appearance of the cabin will pleasantly amaze your passengers

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]