The Renault Logan manufacturer provides all the necessary information for an individual vehicle. It is included in special information plates , in which, in addition to the VIN code, you can even specify the paint code. Let's consider what other information the indicated plates carry , as well as where the Renault Logan engine number is.
How to find out the engine number?
Engine number nearby
Because the numbers and letters on the power unit do not necessarily tell you what exactly is encrypted there. For this purpose you need to use a hint.
The first line contains an alphanumeric index consisting of 7 characters. The first three characters indicate the type of engine, while the others indicate the number of valves, volume and injection system.
Under this line there is a seven-digit index, which will be the specific number of this specific instance of the motor. It must be used for recording in warranty documents.
When cleaning the engine number, do not use iron brushes.
Be careful. Do not use iron brushes when “cleaning” the engine number. You should use only rust removers, such as Tsinkar, or analogues when the Logan body is galvanized.
The more than just the mileage of the engine, the more terrible it will be seen and the more difficult it is to make out the numbers; it’s great that the Traffic Police does not currently ask to check the number of this element when registering.
How to get the necessary information?
Many owners of Renault Megane 2 are wondering: where is the engine number? Independent searches under the hood quite often end in vain. Firstly, this data can be viewed in the technical documentation that the manufacturer attaches to each produced machine. In particular, in the instruction manual, which contains exact data about each component of the car, including the engine number. Secondly, the markings can be found directly on the engine.
VIN code location
In addition to the VIN code, it is necessary to record other data about the car. If possible, do this on several cardboard media so that you can always find the information you are interested in. This will help in choosing a product and purchasing the right part.
The VIN code indicates the model of the engine installed on the car.
Passport data is located on a special identification plate. The location of its fixation is located on the right pillar of the front passenger door.
As for the identification number, which can also be called a VIN code, it is located on the dashboard of the engine department
You can find it, of course, by simply opening the hood. Right in front of your eyes, closer to the car’s interior, you will see a gray plate stretched horizontally.
Logan 2nd generation
Next, we consider options for finding license plates on an updated car.
K7M, K4M and H4M
On the eight-valve 1 6 V8 (K7M) and sixteen-valve 1.6 V16 (K4M) engines, the unit numbers are located in front and to the left along the machine, under the manifold. V16(K4M) you may have to remove part of the air duct. The model and engine number lose their shape over time under the influence of external factors.
The working volume of these engines is 1 6 liters.
Modified engines after restyling with the same markings
The engine designations have not changed. Accordingly, the instruction manual indicates the same location of the number.
The situation is best with the Nissan H4M engine. The area for the number is located vertically, near the junction of the gearbox and is not subject to dust and dirt.
Renault Logan 2 – Engine number K4M, K7M, H4M
However, the main problem lies under the hood. Owners of previous Logans know how easily and quickly engine numbers rot on their engines. In 3-4 years, the symbols could not only become covered with a coating of corrosion, but disappear forever without a trace, so that neither WD-40 nor zinc lotions could help. The second generation did not lose this drawback, but the rate of destruction clearly decreased sharply. It is especially dangerous to clean the markings with sandpaper. Let me remind you that the law contains an article for the deliberate destruction of forensic markings. Fortunately, the new amendments allow you to re-register a car with a rotten license plate. Not without unnecessary movements, of course, but it’s possible.
On the K4M (1.6, 103 hp) and K7M (1.6, 82 hp) Logan 2 power plants, the engine number is located in almost the same place: in the front of the unit, under the manifold, closer to the gearbox. In the case of a 16-valve unit, it is extremely difficult to establish visual contact with the platform, even with an inspection mirror. In order to clean the symbols from rust, you will have to completely dismantle part of the air duct, otherwise a hand with a rag will not fit through.
Engine number K7M (1.6, 82 hp) Engine number K4M (1.6, 103 hp)
The only engine with which there will definitely be no problems with corrosion and dirt is the Nissan H4M unit (113 hp). The engine number on it is printed vertically on an inclined platform in the front of the engine close to the gearbox:
Engine number HR16DE-H4M (113 hp)
Renault Logan 2 – Weaknesses and breakdowns
Malfunctions and repairs
Like all Renault engines, the K7M has problems and typical malfunctions:
- Failure of sensors: IAC, DKPV, DMRV. The problem can be resolved by replacing the elements.
- The vibration is caused by wear on the right pad.
- Overheat. It's usually the thermostat or water pump.
- Troubles the K7M engine. In this case, the malfunction should be looked for in the elements of the process of formation of the air-fuel mixture.
- Knock. A loud metallic noise in the engine compartment means it's time to adjust the valves.
VIN code location
In addition to the VIN code, you also need to record other data about the car. If possible, do this on several paper media so that you can always find the information you are interested in. This will help in choosing and purchasing the right part.
By VIN code you can find out the model of the engine installed on the car
Passport data is located on a special identification plate. The location of its fixation is located on the right pillar of the front passenger door.
As for the identification number, which can also be called a VIN code, it is located on the engine compartment panel
You can find it by simply opening the hood. Directly in front of your eyes, closer to the car interior, you will see a light gray plate, elongated horizontally.
What does the information on the signs mean?
Vehicle identification data
If we talk about the first information plate (which is circled in an oval), then it contains data that will help in finding parts.
| Below this sign is another sticker. If you read it from top to bottom, you can see:
|
By the engine number you can determine whether it has been replaced or repaired. Such a request can be sent through any Renault dealership. Upon request, you can find out whether the engine has undergone a major overhaul, for example, due to wear or bent valves.
Renault Logan paint code
The encrypted Renault Logan paint code is placed on the plate where the VIN is indicated. As a rule, it is mounted at the bottom of the door pillar on the front passenger side. The shade marking consists of four or five characters, which are stamped in a column on the left side in the third line . The first two characters contain information about the type of paint:
- OV – classic plain and opaque;
- NV – mother-of-pearl;
- MV – metallized;
- TE – specific.
The remaining two or three symbols directly indicate the color scheme. They can be made in alphabetic or digital form.
We diagnose and fix Renault Logan 1 errors
Logan 2 paint code
Logan paint codes from 2011
The Renault Logan 2nd generation uses the following paint codes indicating the color markings:
- NV 676 (7701422417) – Perle noire;
- OV 369 (7711143324) – Glace blanche;
- TE B76 (7711213274) – Rouge;
- TE D69 (7711222354) – Platinum grise;
- TE RPL (7711576322) – Bleu Azur;
- TE KNM (7711573071) – Basalte léger;
- TE RPG – Saphir bleu.
Logan color code 1
Paint codes with decoding for Renault Logan first generation:
- 369 – white ice;
- 472 – blue twilight;
- 632 – shimmering platinum;
- 676 – black mother-of-pearl, black pearls;
- 21B – red bullfighter;
- 61G – Aegean Sea;
- B66 – gray;
- D69 – platinum gray;
- F98 – green opaline;
- J48 – sea blue;
- KNA – gray comet;
- KNM – basalt gray;
- RNF – blue mineral;
- RNZ - electric blue.
We study the icons on the dashboard of Renault Logan 2
Components of the code
This cipher consists of 17 characters, including Latin letters and Arabic numerals. But there are three exceptions, these include the symbols “I”, “O”, “Q”. Why are these letters not involved in the formation of the VIN code? The answer to this question is very simple. The characters “O” and “Q” themselves are very easy to confuse with “0”. Yes, and correcting “O” and “0” to “Q” is not at all difficult. The same applies to the letter “I”, which is not only easy to confuse with “1”, but also easy to correct, for example, by making “L”, “F”, “E” or some other symbol. Therefore, to make life more difficult for scammers, these letters were excluded.
The VIN structure can be divided into three main parts. It all starts with WMI, which consists of the first three characters. This part characterizes the vehicle manufacturer. Having deciphered the first character, you will find out in which geographical area the car was produced; the second character hides more specific information, namely the country. The third character will already provide information about a specific manufacturer. In some cases, you can see the number “9” in the last position of the WMI part, this means that less than 500 cars are produced per year. But information about the manufacturer will then be hidden behind signs 12–14.
Decoding Renault VIN code
Next is the VDS group, it includes six characters. Typically, this part of the code provides information about the characteristics of the vehicle - body type, model range, equipment, etc. Sometimes the gross vehicle weight and safety systems may even be indicated. The 9th position of the VIN, where the control number is hidden, deserves special attention. If fraudsters have a small chance to fake the remaining symbols, then during verification this particular number will not confirm the authenticity of the marking.
The last, closing group is called VIS. It includes 8 designations. After reading them, you can find out about the model year of the car, especially for the American manufacturer. In general, this information is of a very individual nature, for example, for most cars produced in the USA, the 10th position indicates the next model year, starting from July 1. This has a completely logical explanation, because many cars first go to the exhibition, and only next year for sale. Thus, with the onset of the new calendar year, there are no “last year’s” products left in the warehouse. But it is worth noting that many manufacturers may not be clever with numbers and indicate the actual year of manufacture.
How does a unique identifier work?
According to the recommendations of the International Organization for Standardization, the VIN of Renault and other cars is conventionally divided into three parts, in each of which manufacturers encrypt certain information. The first three positions of the code are the Worldwide Manufacturer Identifier (WMI). First comes a character that encrypts the geographic area code. The second letter indicates the country where the car was manufactured. The latter is assigned to a specific manufacturer.
For example, if a Duster’s identification code includes VF1, then the first two letters indicate that the car was manufactured in France, and the number “1” indicates the specific plant where the assembly was carried out.
The second section, referred to as VDS, consists of six characters in which the following information is encoded:
- machine type;
- purpose of the car;
- motor type and other information.
Despite the fact that the international standard requires certain data to be indicated in VDS, each manufacturer independently decides what information to encrypt.
In particular, if Renault adheres to this practice, then Chrysler includes information about installed airbags in the VIN code. In addition, letters in positions 4-6 are usually written on cars supplied to the American market. European manufacturers often mark this zone with a triple “Z”.
The third section of Vin is called VIS. This is where the identification number is located, allowing you to distinguish two identical cars.
Why does almost everyone have to check their VIN?
The VIN code was invented so that you could check whether the car was stolen and whether any dubious stories had happened to it. Essentially, it acts as an identification number for a car. Therefore, when purchasing a vehicle, you must also check its code, especially when it comes to expensive or exclusive brands. You should not save on this, even if you take a car from a car dealership, because there are known cases of fraud in them too. You will also find out the exact release date and the number of previous owners.
Expert opinion Ruslan Konstantinov Expert on automotive topics. Graduated from Izhevsk State Technical University named after M.T. Kalashnikov, specializing in “Operation of transport and technological machines and complexes.” More than 10 years of professional car repair experience.
Every modern car has a unique identification number or VIN (Vehicle Identification Number), which contains important information. In fact, after deciphering the code, you can find out the full history of the vehicle. Identification numbers are regulated by the ISO 3779-1983 standard. In compliance with this regulation, cars are produced in 24 countries. The VIN code consists of 17 characters, which contain both letters and numbers. Previously, all domestically produced cars had two unique numbers; the designations were applied to the engine and the body. These numbers were often replaced by hijackers, but this practice was ineffective, since any examination could reveal the scammers. Now such signs are no longer used, only the number on the body remains, which is the VIN code. Similar designations were introduced in the mid-90s.
Vehicle VIN
However, this is not the only, although the main purpose of the number. This code has been assigned by the manufacturer to absolutely every vehicle since 1980. By deciphering it, you can find out the engine type and equipment. Therefore, you can be guided by alphanumeric designations when purchasing spare parts.
Why do you need a VIN code?
VIN stands for Vehicle Identification Number. This code appeared after many different models appeared on the automobile market. By VIN you can identify:
- car make;
- Renault model;
- complete set of the model.
Initially, there were many VIN codes. Each manufacturer, at its own discretion, assigned a number designation to the vehicles it produced. In the mid-80s of the last century, a single standard was introduced in the United States, according to which the VIN must consist of 17 numbers and letters. This designation was subsequently used on cars produced and sold throughout the world.
According to the current standard, the code is applied by the company that produces the car. That is, the manufacturer who ships the cars to dealers or end customers is responsible for this. The number and letter designation is necessary not only for identifying the vehicle.
By looking at the VIN code, repair shop employees can immediately find out:
- machine assembly date;
- motor type;
- transmission version.
How to avoid becoming a victim of scammers?
Such unusual places are chosen for a reason. Of course, a number of difficulties arise in finding and disassembling it, although in all cases the VIN should be readable. But if it is in an easily accessible place, then scammers will be able to interrupt some signs without making much effort. For example, from “5” it is easy to make “6”, the letter “P” can be easily changed to “R”, and anything can happen with the number “1”.
In addition, some manufacturers themselves give the scammers a free hand and, instead of squeezing out this code with a special stamp, they began to apply it using standard technology without deforming the sheet. And such code is not at all difficult to fake. The fact is that in the first case, due to the deformation of the sheet material, it was quite problematic to “correct” any symbol, and if the code was also difficult to access, then it was completely impossible.
Embossed code on sheet material
Usually, due to basic human laziness, scammers process only the most easily accessible option. In addition, you should be wary of scratches, traces of dirt and other defects. Check the fastening of the sign; it is usually secured with small, neat rivets. If you notice any traces of interference, it is better to refuse the purchase, as there is a high probability that it will bring headaches instead of joy.
F4R Specifications:
The power increased by 8 horsepower, the traction and top speed of the Duster increased accordingly, despite the fact that the fuel consumption actually did not change, and the environmental standard increased to EURO 5.
Georgy, driving experience 15 years
Wisdom overcame greed, and I took a Renault Duster with a two-liter F4R. The test drive showed that the seemingly monotonous Dusters are completely different in traction and dynamics. The fuel consumption of the more massive Renault is not much more than that of its younger brother. On the highway 8 l.
, within the boundaries of the town 12-13. I'm happy with the purchase. Inexpensive and harsh.
Andrey, driving experience 9 years
And you want a frisky and comfortable ride. The 4.0 Renault Duster engine is good and allows you to accelerate to 170 km/h with reserve. Now he drives uphill through mud and snow like a tank.
I highly recommend installing additional sound insulation, and standard, in other words, other protection for the Renault Duster engine. The companion split the crankcase. In Abkhazia, I ran into a stone hidden in the grass.
Yuri, driving experience 7 years
The sound grew stronger all the time. Fuel consumption has also increased. I went to the officials. They said to change the phase regulator, timing belt and rollers. Changed it. Got into the car, Duster, you can think about it again, it was born - quiet. Gasoline consumption has decreased. This is great, but why did you take off so early?
Where to look for the treasured ciphers?
To decipher the Renault VIN code, you must first find it. For the entire global automotive industry, there are several locations for this cipher. Most often, it is enough to look through the windshield from the outside at the instrument panel; it is marked on the left side of it. Or look at the left A-pillar located at the front. The number is also applied to the door sills, cylinder block or its head. If you still haven’t found the code, then it’s time to examine the partition between the passenger compartment and the engine compartment. In car frame structures, which are typical for SUVs, the VIN may be indicated on the side members.
VIN on the side member
Renault cars are most often characterized by the following locations of the identification code:
- at the very bottom of the arch next to the driver's seat (you will have to open the door),
- under the carpet under the right seat,
- on the surface of the cylinder block,
- on the front passenger seat pillar (between the hinges).
Very often this code is duplicated. It is stamped on a special table, which is placed under the hood or on the surface of the air intake box shelf. This is probably the only place convenient for viewing.
Where is the VIN located on the body of a Renault Duster?
On a Renault Duster car, the VIN code is located in three places, just like on other cars. The VIN number can be both main and backup, let's try to find all the places where you need to look for the VIN code on a Renault Duster:
- We lift the hood and pay attention to the shock absorber glass on the right side; on the first or second edge you can see a seventeen-digit number. It will contain both letters of the Latin alphabet and numbers.
- There is a sticker or plate on the body pillar on the right side between the driver's and rear left doors where your VIN code is shown.
There is also a duplicate VIN code, which can be found on the trunk floor trim, there is a place where it is stamped on the body.
Location of the main VIN code in Renault Duster These are all the places where you can find the body number of your crossover.
Checking and selection of components
Getting the VIN for any Renault car is quite simple. Today there are many services that provide similar services. You just need to fill out the appropriate windows, and within a few days you will receive a detailed transcript. It is better to contact only official websites to avoid becoming a victim of scammers. Of course, this service is not free, but is a few hundred rubles comparable to the possible losses that a damaged or stolen car will bring?
Also, if you break through this code, you can accurately select spare parts, because it also indicates the equipment. Recently, most stores provide a similar service; you can either indicate the make, model, year of manufacture and engine size of your vehicle, or simply fill out the column reserved for the VIN code. The last option will eliminate the possibility of error.
Finding the engine number of Logan 1st generation
Since 2004, the car has been equipped with 2 gasoline units K7J and K7M.
After restyling, the line of units was added with a more powerful sixteen-valve petrol engine K4M, 1 6 liters.
Let's look at these versions.
K7J and K7M
Engines 1 4 l and K7M - 1 6 l have 8 valves each.
The numbers of these engines are located on the tide of the block, not far from the oil pressure sensor, to the left as the vehicle moves. It can be difficult to find due to the initial shallow depth of the markings, and quickly loses clarity due to elementary rotting.
The engines were installed on the first generation Logan (2005 - 2006, 2007, 2008, 2009 - 2014). Location of markings during the production period.
After restyling in 2009 - K7J, K7M and K4M
A sixteen-valve K4M engine was added to the two engines. The area with the number is also located on the left side of the car, but in order to see it, it is better to dismantle part of the air duct.
Restyled modifications were produced in the following years: 2009 – 2014. The location of the site does not depend on the release date, but only on the modification of the power plant.
