Where is the engine and body number on Renault Duster?

At the bottom of the B-pillar on the right side there are two plates indicating the vehicle's registration data. Explanation of symbols on plates

: 1 - manufacturing plant;
2 — vehicle type approval number; 3 — vehicle identification number (VIN); 4 - permissible maximum vehicle weight; 5 - permissible weight of a car with a trailer equipped with brakes; 6 — maximum permissible load on the front axle; 7 — maximum permissible load on the rear axle; 8 - code of technical characteristics of the car; 9 — body color code (paint number); 10 — equipment level code; 11 — code of upholstery; 12 — vehicle type code; 13 — special configuration code; 14 - serial number; 15 - interior color code Example of identification number decoding Х7LLSRAHH6H000000
: Х7L - according to international standards, the manufacturer's code is indicated; L — body type (sedan); SR - car model; A — presence of an airbag (4 — without an airbag); HH - 1.6 l engine (GH - 1.4 l engine); 6 — model year of the car; H000000 - body number

The vehicle identification number (VIN) is located in the engine compartment - stamped on the shelf of the air intake box.

The engine model and number are marked on the tide of the front side of the cylinder block, next to the oil pressure alarm sensor

Engine number location (exhaust manifold heat shield removed for clarity).

Categories of goods that may be of interest to you based on the article “Passport data of Renault Duster”:

Where is the engine number on Renault Duster?

Even if the Renault Duster is not particularly interesting to car thieves, an illiterate check of forensic plates can be costly, if, of course, you look at something.
The main VIN of the Duster is located on the right front mudguard (“cup”). There won’t be any problems finding it, but it’s worth considering that sometimes the paint peels off and the exposed symbols begin to actively rust. After purchase, such markings should be sprayed with a protective coating. Anything, even solid oil.

The VIN is duplicated by a sticker on the right central pillar. The label turned out to be even less resistant to moisture and on many 3-4 year old cars the label becomes unreadable. Before purchasing such a car, you should first ask the inspector when checking the license plates whether he will let such a car through, and only after that make a decision about the purchase.

Few people know, but the VIN number is registered in almost all Renault Duster electronic units:

Car : Renault Duster. Asks : Alexey Lisnyak. The essence of the question : where is the engine number on Renault Duster?

Good afternoon, please tell me where is the engine number for Renault Duster? And then a situation arose that the car had to be re-registered due to the loss of the license plate and the engine number needed to be verified, but I don’t know where to read it ((

And one more thing, I was advised to look for this in the book, which is the instruction manual, but the book is also apparently lost somewhere, I can’t find it. Will I face any consequences for losing the manual and do I need to carry it with me in the car along with other documents? Or is it just a book for personal use and nothing more?) I would be glad for sensible advice.

I myself was looking for an answer to this question; I found the following information on the forums: the engine model and number, according to the manufacturer’s data, are located on the tide of the cylinder block in its left rear part (next to the oil sensor).

They will not do anything to you for losing the manual, it is for personal use only. By the way, you can find the book in pdf format on the Internet, in case you need it again in the future

Logically, body number, engine number, etc. must be directly accessible. I can imagine how the traffic cop decided to check the passport with those and dismantled the floor of the car.

Usually, such things are written first in a car’s passport, so look for this book.

The engine number on a Renault Duster is located on the front of the cylinder block, near the exhaust manifold.

why do you need him? Now engines are like spare parts. they are not verified. required data for the front passenger seat.

If the inspector has suspicions, he may require checking the engine number.

Maintainability of the K4M Renault Duster engine. Engine Maintainability k4m Dacia Duster.

In addition to everything written above, the Duster F4R engine is characterized by increased oil consumption. Nikita Khlebushkin Having checked the Russified Renault Duster, which had just appeared, with accelerated life tests, we concluded that it was quite reliable. On the body pillar on the right where the Renault Duster engine number is located between the driver's and rear left doors there is a sticker or plate showing your VIN code.

Choosing a car Duster/Megan, etc. look at the 2 liter engine, the K4M will not be enough. Where is…

In order to decipher the year of manufacture of a Renault Duster car, for example, or the exact configuration, you need to have information from the oval plate and arm yourself with a program on your computer. For this crossover, the code can be found on the right front shock absorber under the hood and on the left body pillar.

Location of the main VIN code in Renault Duster These are all the places where you can find the body number of your crossover. A bumper extending from the fender is not a sign of an accident: The rear crankshaft oil seal tends to leak on engines with over a thousand kilometers.

Are you buying a used car? Check the engine number!

Take a look at the inner parts of the sills: Plastic also adds trouble: Sandblasting, as we expected, affects the protruding sidewalls in front of the rear arches - it makes sense to protect them with anti-gravel film, and replace the scanty front mudguards with larger ones. And the copies of the first year of production, almost all of them, were marked by bursting paint covering the mastic at the rear of the joints between the roof and the sides. Problem areas were repainted under warranty, but stubborn cracks were not slow to appear again.

In July of this year, to increase the rigidity of the structure, the length of the weld in the trunk opening was doubled, but this did not become a panacea for troubles - fortunately, the defect is purely cosmetic and does not lead to further devastation. Cracks in the paint over the joints of the rear roof panel and sidewalls are an almost universal epidemic. Don’t be surprised if you find a leaking aquarium in the interior light bulb: Another drop, under the feet of the front passenger, is a generic sore of the entire Logan family: The initially silent interior produces almost no new sounds over time grows.

And the problem with a striking electric heater in diesel models older than a year can be solved by flashing the ECU.

Headlights are prone to fogging, and their plastic is easily scratched and quickly becomes cloudy. A bumper moving away from the fender is not a sign of an accident: Drought can also happen if the valve that switches the washer supply between the front and rear windows fails.

But it’s even worse if, on pre-restyling models, water begins to seep past the injectors on the hood, which lack rubber gaskets, or washer fluid leaks at the place where the tube fits: In order to avoid misfires and loss of coils, 65 euro originals and analogues three times cheaper, it is better to place the injectors on sealant or replace with three-jet ones from later versions.

And if things do get to the extreme, do not hesitate to replace the elements of the ignition system: In addition to coils and spark plugs, the culprit of problems with gasoline engines is 1.

And remember that the situation with a not particularly effective crankcase ventilation system for both engines is aggravated by a too modest air filter. It is better to change it every 10 thousand kilometers, and when a deposit of motor oil is discovered in the receiver housing, the more driving at high speeds, the richer the deposits - and more often.

Communities › Renault Duster › Blog › Engine 2.0 F4R

Engine manufacturer - Renault Espana Years of production - (1993 - present time) Engine brand - F4R Cylinder block material - cast iron Power system - injector Engine type - in-line Number of cylinders - 4 Valves per cylinder - 4 Piston stroke - 93 mm Cylinder diameter - 82, 7 mm Compression ratio – 9.8 Engine capacity – 1998 cm3.
Duster engine power – 135-138 hp. /5750 rpm Torque - 190-195 Nm / 3750 rpm Fuel - 92/95 Environmental standards - Euro 3/4/5 Fuel consumption - city 10.3 l. | track 6.5 l. | mixed 7.8 l/100 km Oil consumption - up to 0.5 l/1000 km Engine oil f4r duster/megan/lagoon: 5W-40 5W-30 Change every 10 thousand km. Motor life of F4R:

1. According to the plant - no data 2. In practice - 250-300 thousand km

TUNING

Potential – 200+ hp Without loss of resource - up to 170-200 hp.

Engine installed on: Renault Duster Renault Megane 2

F4R engine malfunctions and repairs

Engine Renault F4R 2.0 l. 135-138 hp (depending on the index), the latter became especially popular thanks to the popular Renault Duster SUV and the Megan family. There are a number of different modifications of the F4R, with various indices, their power varies within narrow limits, from 135 to 138 hp. The index shows the car for which this engine was intended (mounts) and the engine settings. Almost all parts of the F4R are interchangeable and the differences are mainly in the attachments. In addition to the usual variations, there are also sports ones - used on the Clio Sport with power from 169 hp. up to 200 hp Their differences: electronic throttle valve, different air filter, steel crankshaft (instead of cast iron), modified cylinder head, exhaust. I would like to immediately put an end to the issue of a belt or chain on the Duster engine; the engine has a timing belt drive. F4R itself is not new enough, all its disadvantages are known and the causes of malfunctions are known. Let's look at the most popular faults of the F4R 2.0: the phase regulator, it fails once every 60-70 thousand km, this will be indicated by the sound of the engine reminiscent of a diesel engine, in addition, such a sound may indicate more serious problems (cracked cylinder head, burnt out piston, valve) , one way or another you need to measure the compression and proceed from that. Ignition coils do not last long; when the F4R Duster engine fails, it begins to twitch, this is the main reason, besides it, the issue may be in the crankshaft position sensor (crankshaft position sensor) or in the spark plugs. The throttle valve likes to get clogged and your Renault F4R does not start in the best way; after cleaning, the problem disappears as if by hand. The rear crankshaft oil seal, likes to leak on engines with mileage over 100 thousand km, can be changed without problems. The Duster engine speed fluctuates, this is a feature of the engine, it’s not scary. Speaking about the features, you need to note one more thing, the noise of the Renault Duster engine in the timing belt area, this is also not scary. In addition to everything written above, the Duster F4R engine is characterized by increased oil consumption. Despite everything, the motor is quite decent and during normal operation it will not cause any special problems; the service life of the Duster engine is 250-300 thousand km before major repairs. Choosing a car Duster/Megan, etc. look at the 2 liter engine, the 1.6 K4M will not be enough.

Where is the F4R Renault Duster/Megan engine number?

We take a small mirror and look for the place shown in the photo below.

Engine tuning Renault F4R 2.0 16V DusterMegan.

Chip tuning, firmware for Renault Duster F4R engine. Finalization.

Exactly like 95% of other naturally aspirated engines, the firmware won’t do anything here, feel free to throw this idea out of your head. It will be much more effective to convert your 2 liter Renault Duster engine into a Clio RS engine, install camshafts from RS or tuning ones with a phase of about 280 lift, the maximum possible, direct-flow intake, exhaust, flash, it will run at the level of 170 horsepower of the engine. For further modifications, you need to change the piston to forging, modify the cylinder head... cut the channels (yes, yes, like a tuning pelvis :)), modify the valve seats, remove sharp edges, grind the channels, install a lightweight flywheel, receiver... maybe you can get up to 200 hp. With. If you really want, you can install a 4th throttle intake on evil shafts, somehow configure it, but the cost of construction will be hellish, the ratio is $/hp. beyond comprehension))

Compressor and turbine for Renault F4R Duster/Fluence/Megan 2.0 liter

There are no ready-made compressor kits for F4R; you will have to buy a separate compressor with low pressure... 0.5 bar for a standard motor is the limit. We are looking for such a compressor, 360cc injectors, direct-flow exhaust, set it up online and about 200+ hp. can be inflated. Install a more efficient turbine on the F4R and inflate 300 hp without any problems. as on the Megane RS, it won’t work, the F4RT turbo engine from the F4R, in addition to the turbine, has a different reinforced block, pistons for a lower compression ratio, so you need to build a fast turbo engine initially on the F4RT.

Where is the VIN code for Renault Duster: photos and videos

how to view the engine number and VIN code of Renault Kangoo

In other words, its structure fully corresponds to that described above.

In one click! Base throughout Russia. Comprehensive report for the river. Check!

The first three characters contain information about the manufacturer. Each subsequent year gets the next letter of the alphabet.

In general, this information is of a very individual nature, for example, for most cars produced by Renault USA, the th position indicates the next model year, starting from July 1. If fraudsters have a small chance to fake the remaining symbols, then during verification this particular number will not confirm the authenticity of the marking.

Designations on the top sticker

Here, having the necessary information, you can easily find out in which country the model was produced and where the car comes from. Next comes the VIN identifier of the body type.

Depending on the symbol indicated, it could be a hatchback, station wagon, sedan or even a minibus. It is important to understand that each brand has its own body type coding method, so you need to familiarize yourself with the relevant documentation in advance.

The next block is the VIN code of the model range. As a rule, this is the designation of the corresponding family or model line. In other words, this does not indicate the affiliation of any model, but the model range to which it belongs, according to the manufacturer’s classification.

Next comes the unique engine code. Here you inevitably need to follow the information from the documentation, since each motor model has its own unique code, usually consisting of several characters. The last, longest VIN block is the product serial number.

Vin code Megan 3, vin Renault Megan 3

This is always a unique combination, and it can be used to unmistakably determine when and where the Renault Sandero was produced. Let's give an example. On the Renault Sandero, the VIN number specification is standard and is not very difficult to decipher on your own. In other words, its structure fully corresponds to that described above. Türkiye; GA1 - manufacturer: Madagascar; VMK - manufacturer: France, sports car division Sport; VFA - manufacturer: Renault - Alpina, country: France; X7L - manufacturer: The next group, the second in order, carries information about the type of car.

Here, at one time, changes were made in the rules for classifying car types, so owners may be faced with at least two encryption options, for example: D65D05 is an earlier encryption type, or: Let's consider both options, since they logically overlap with each other.

Renault VIN decoding: getting information

A VIN is assigned to each vehicle. This code contains various information about the machine. In particular, by decoding the Renault VIN, you can find out the body type, model and configuration, and some history of the car. Also, using this code, a list of original parts for cars of the French brand is selected. However, unlike other companies, Renault does not encrypt the year of manufacture of the car in the VIN.

Why do you need a VIN code?

  • car make;
  • Renault model;
  • complete set of the model.

According to the current standard, the code is applied by the company that produces the car. That is, the manufacturer who ships the cars to dealers or end customers is responsible for this.

  • machine assembly date;
  • motor type;
  • transmission version.

There are three places where the Renault Duster VIN number is located:

Decoding VIN number

The first three numbers and letters are an international code assigned to a specific manufacturer. For Renault vehicles, the VIN number begins with:

Renault puts VMK at the beginning of the VIN code on sports models, and VFA on Alpina cars. That is, such designations cannot be found in Duster. Crossovers assembled at Russian factories are marked as X7L.

The seventh position can be “A”, “D”, “G”, “H”. Each of these letters is assigned to a specific configuration in which the crossover is produced.

  • A - 1.6-liter 108 hp;
  • T, 8 - 1.6-liter 102 hp;
  • G, J – 2-liter 135 hp;
  • D, V – 1.5-liter diesel with 65-110 hp.
  • 4, 5, H, K, G – 5-speed manual transmission;
  • N, G – 6-speed manual transmission;
  • B, D, 6 – automatic transmission.

The VIN code is often used to accurately identify a vehicle when purchasing used models. The discrepancy between the number in the technical documentation and what is stamped on the body indicates a stolen car.

According to the recommendations of the International Organization for Standardization, the VIN of Renault and other cars is conventionally divided into three parts, in each of which manufacturers encrypt certain information.

For example, if a Duster’s identification code includes VF1, then the first two letters indicate that the car was manufactured in France, and the number “1” indicates the specific plant where the assembly was carried out.

The second section, referred to as VDS, consists of six characters in which the following information is encoded:

Despite the fact that the international standard requires certain data to be indicated in VDS, each manufacturer independently decides what information to encrypt. In particular, if Renault adheres to this practice, then Chrysler includes information about installed airbags in the VIN code.

The third section of Vin is called VIS. This is where the identification number is located, allowing you to distinguish two identical cars.

You can determine the geographic area in which the crossover was released by deciphering the first digit or letter of the identification number:

That is, if the Duster is supplied from a South American factory, then the VIN code of the all-terrain vehicle begins with 8 or 9. The last two letters and numbers located in WMI help to find out the location of the enterprise where the Duster was assembled. In Russia, crossovers are mainly sold that have X3, X2, X1 or X0 in this place in the VIN code.

This VIN code area is filled by American and Chinese manufacturers, as well as companies that supply vehicles to the US market.

Results

Deciphering the license plate number helps you find out comprehensive information about the vehicle: country of manufacture, company name, configuration features, and more.

Video

Source: https://vseoduster.ru/o-daster/rasshifrovka-vin-renault-poluchaem-informatsiyu

Renault Duster starter: signs of malfunction

  • The starter does not operate when the key is turned.
  • The starter does not turn off after the engine starts.
  • The starter turns, but the crankshaft does not turn. If the Renault Duster does not start (the starter turns, but the engine does not start), check the fuel and electrical systems of the car.
  • Extraneous noise and grinding noise when the starter operates.

If the starter does not engage, try the following:

Removing and replacing Renault Duster starter

  • Remove the wire from the negative side of the battery.
  • Unscrew the motor protection.
  • Remove the air intake and resonator from the car.
  • Remove the bolts that secure the starter.
  • Unscrew the nut that secures the wire tip to the control terminal of the traction relay.
  • Remove the ferrule from the wire.
  • Unscrew the bolt from below that holds the starter (there is only one there).
  • Remove the starter itself and replace it with a working one.

When installing a new starter, you first need to put the wire ends on the contact bolt, as well as the control terminal of the traction relay.

If you are not sure that the problem is with the starter, you should check it after removal.

To directly check the operation of the starter:

How much does a Renault Duster starter cost?

Source: https://modtop.ru/gde-nakhoditsya-starter-na-dastere

Each car part, from the seat belt to the engine , has its own number linked to the VIN code, which is assigned to each car and contains all the information about it, including information about the engine. Replacing the cabin filter of Renault Megane 2 with your own. In Renault Megane 2, the VIN code is located under the windshield and is duplicated on a plate that is attached to the B-pillar on the right side.

Obviously, if one or another component fails, a car enthusiast cannot always dismantle it without the help of others, bring it to a special store and ask the sellers to select a similar one. It’s easier to look at the car’s VIN code or unique number , especially when it comes to such large elements of the car as the engine.

Many owners of Renault Megane 2 are wondering: where is the engine number ? Independent searches under the hood quite often end in vain. Where is the KAMAZ frame number 55111.

Secondly, the markings can be found directly on the engine.

Many owners of Renault Megane 2 ask a similar question. For example, when buying a car on the secondary market, to play it safe and see with your own eyes that the engine in the car is “original”. Removing the bumper of Renault Megane 2 - YouTube.

To find the number on the engine, you should stock up on available tools: a small flashlight, rust remover (for example WD) and rags.

Renault Megane 2 engine

How to view the engine number and VIN code of Renault Kangoo

Identification number (VIN) Renault Megane 2

By deciphering it, you can find out the engine type and equipment. Therefore, you can be guided by alphanumeric designations when purchasing spare parts. Where to look for the treasured ciphers? To decipher the Renault VIN code, you must first find it. For the entire global automotive industry, there are several locations for this cipher.

Most often, it is enough to look through the windshield from the outside at the instrument panel; it is marked on the left side of it. Or look at the left A-pillar located at the front. The number is also applied to the door sills, cylinder block or its head. If you still haven’t found the code, then it’s time to examine the partition between the passenger compartment and the engine compartment.

In car frame structures, which are typical for SUVs, the VIN may be indicated on the side members. VIN on the side member Renault cars are most often characterized by the following locations of the identification code: Very often this code is duplicated.

It is stamped on a special table, which is placed under the hood or on the surface of the air intake box shelf. This is probably the only place convenient for viewing.

How to avoid becoming a victim of scammers? Such unusual places are chosen for a reason. Of course, a number of difficulties arise in finding and disassembling it, although in all cases the VIN should be readable. But if it is in an easily accessible place, then scammers will be able to interrupt some signs without making much effort.

In addition, some manufacturers themselves give the scammers a free hand and, instead of squeezing out this code with a special stamp, they began to apply it using standard technology without deforming the sheet.

And such code is not at all difficult to fake.

Try to find it in another place and check whether the numbers match, and then go through the official database. Usually, due to basic human laziness, scammers process only the most easily accessible option.

Where is the engine number on Renault Duster?

Renault Dacia Duster. Interturn urethane spacers for Jinke springs

The life of the suspension quickly depletes and it requires expensive repairs. Experts solved this problem by inserting interturn spacers into the springs.

Urethane buffer pads are placed between the coils of the machine's shock absorber spring. They perfectly increase the stability of the car and its handling, bear the load during shocks and impacts and give the movement a comfortable smoothness. Thanks to spacers, the service life of shock absorbers is doubled, and the car interior becomes quieter, since polyurethane tends to absorb sounds from friction and creaking springs (noise and resonance muffler).

Jinke spring spacers were developed specifically for roads with potholes and cold winters. The special patented design geometry most effectively protects the suspension from breakdowns. The modified composition retains its properties at temperatures down to minus 45 degrees and provides a service life of more than 6-7 years.

  • reduce the likelihood of breakdowns, reduce the force of impacts;
  • minimize shaking when moving;
  • increase comfort due to a “smooth” ride;
  • minimize sway and body roll;
  • increase stability on bends and turns;
  • increase clearance;
  • reduce braking distance;
  • significantly reduce machine repair costs;
  • increase controllability;
  • extend the life of the shock absorber by approximately 2 times;
  • easy to install;
  • “protect” the driver from fatigue due to constant shaking;
  • Jinke spring buffers, unlike their “counterparts”, are the most durable and strong, they do not deform or break prematurely.

Standard autobuffers are made from high-tech material: a mixture of a special composition, high-quality rubber and transparent polyurethane (50%). This combination can effectively absorb shocks and vibrations. Apparently, this is why the famous Nike company uses this material in the production of its branded sports shoes. Urethane is able to “remember” shapes and return to their original position after loading (shape memory effect). Jinke spacers are 100% made of polyurethane and special stabilizing additives, which provides them with the best performance characteristics. A large number of additives explains the yellowish tint.

Buffers for springs have been produced for more than 15 years and are certified by GOST and ISO 9001:2008 (the most authoritative standards of the automotive industry). They are selected individually for each car and have a wide range of sizes. The latest generation urethane buffers, having passed numerous tests, have a five-year warranty and a service life of more than 6 years.

Please note that Jinke urethane buffers are not a counterfeit of Korean TTC or Chinese AMT autobuffers, but an independent high-quality development of a large company produced in Malaysia.

How to choose the size of auto buffers:

To select the correct size specifically for your car, you need to measure the interturn distance in the middle of the spring. This must be done with the car lowered! If access to the springs is difficult, then you can take measurements with the car suspended, and the resulting value must be reduced by 5-10 mm. For convenience, use folded paper. Reduce or increase its width until it begins to fit between the turns. Then simply measure it with a ruler and, according to the table, select the size of the autobuffers. Do you want to win real money and create a financial cushion for the future? Then play fortune casino online is for you!

Installation of interturn spacers:

Requires a jack and about half an hour of time. Installation is carried out on a suspended wheel.

  1. prepare a pillow, soap solution and jack;
  2. raise the car, make sure that the wheel does not touch the floor;
  3. check whether the shock absorber spring is relaxed;
  4. spray the soap solution on the spacers and springs;
  5. install the spacer in the middle coil of the spring;
  6. make sure that the spring coils fit exactly into the grooves;
  7. secure the buffers with clamps.

You can install urethane buffer cushions yourself without contacting a service center. Their installation occurs without changing the geometry of the suspension (nothing needs to be expanded, sawed, bent, etc.) and without interfering with the design of the machine.

  • Material – polyurethane, special additives.
  • Available sizes – A, B, C, D, E, F.
  • Warranty – 5 years.
  • Manufacturer: Jinke.
  • 2 x Urethane buffers
  • Original packaging

By choosing for your car such a unique innovative product as interturn spacers for Jinke springs, you choose economy, quality, comfort and increase traffic safety!

Engine number location

Where is the Renault Logan engine number located?

The engine model and number will be engraved on the cylinder block boss. More specifically, you need to look for it in the left rear part, not far from the oil sensor.

The engine in the “Prestige” configuration, which is equipped with 16 valves, does not suffer from such a disease. Read more in the article: choose 8 or 16 valves when buying a Renault Logan.

How to find out the engine number?

Engine number close up

Naturally, the numbers and letters on the power unit will not necessarily tell you what exactly is encrypted there. To do this you need to use a hint.

The first line contains an alphanumeric index consisting of seven characters. The first three characters indicate the type of engine, and the rest indicate the number of valves, volume and injection system.

Under this line there is a seven-digit index, which will be the direct number of this particular instance of the motor. It should be used for recording in warranty documents.

Why such complexity?

The VIN code contains information that is not duplicated even in the vehicle title. In addition, each car has its own code; this combination cannot be repeated. There are mathematical methods to verify the correctness of this cipher. Using a special service or doing your own calculations, you can make sure that the combination is genuine.

When buying a used car, this will make sure that the car is not listed as stolen, and also find out information:

  • about the number of previous owners;
  • whether the car was used as a taxi;
  • about whether it is the subject of a pledge;
  • about an accident.

When purchasing a new car, it is also a good idea to check that the VIN is correct. Unscrupulous dealerships may try to sell a car produced last year under the guise of a new one.

VIN code location

In addition to the VIN code, you also need to record other data about the car. If possible, do this on several paper media so that you can always find the information you are interested in. This will help in choosing and purchasing the right part.

By VIN code you can find out the model of the engine installed on the car

Passport data is located on a special identification plate. The location of its fixation is located on the right pillar of the front passenger door.

As for the identification number, which can also be called a VIN code, it is located on the engine compartment panel

You can find it by simply opening the hood. Directly in front of your eyes, closer to the car interior, you will see a light gray plate, elongated horizontally.

What does the information on the signs mean?

Vehicle identification data

If we talk about the first information plate (which is circled in an oval), then it contains data that will help in finding parts.
  1. manufacturer;
  2. vehicle type approval number;
  3. vehicle identification number (VIN);
  4. permissible maximum vehicle weight;
  5. permissible weight of a vehicle with a trailer equipped with brakes;
  6. maximum permissible load on the front axle;
  7. maximum permissible load on the rear axle;
  8. vehicle technical specifications code;
  9. body color code (paint number);
  10. equipment level code;
  11. upholstery code;
  12. vehicle type code;
  13. special equipment code;
  14. factory number;
  15. interior color code.

By the engine number you can determine whether it has been replaced or repaired. Such a request can be sent through any Renault dealership. Upon request, you can find out whether the engine has undergone a major overhaul, for example, due to wear or bent valves.

What you can do yourself

Having bought a Renault Duster, many people begin to stuff it with various bells and whistles: rear parking radar, rear view camera (RCV), video recorder, protection of components under the bottom of the SUV, etc. However, many are unaware of what is already installed in their car. What is included as standard in the Duster package?

Every thing has its place

When I went to a gas station for the first time in my new Renault Duster, I didn’t immediately figure out where to fit the gas tank cap when you insert the gas pump nozzle. I had to put the cap in my pocket and go pay the cashier for gas. And only then did we realize that there is a special hook on the gas tank hatch on which the gas tank cap is hung, like this:

Secret place

The automaker Renault took care and placed a set of spare fuses in the Duster in case of a breakdown on the road. There are also tweezers for easy installation of fuses. But where to find this kit? It's simple, it's hidden behind the fuse compartment cover to the left of the driver at the end of the front panel and is accessible when the front door is open:

Remove unnecessary things

If you don't need the headrests, you can easily remove them. To do this, you just need to press two buttons and pull the headrest up.

How to hide from the sun

The sun visor can be used not only on the windshield, but also on the side windows. Simply pull the edge of the visor towards you, releasing it from the lock and turn it onto the side window. Now the sun will not annoy you from the side.

Children's castle

Not everyone realizes that the metal levers at the end of the rear doors are a useful child lock feature. Press this lever and the child will not be able to open the door from the inside, but from the outside you will open it as usual.

Adjusting the Duster steering wheel to suit you

The steering wheel on the Renault Duster can be adjusted in height, although there are only 2 positions, but this is better than nothing at all. The steering wheel adjustment button is located at the bottom of the steering column.

Spare parts, maintenance

Products from the Dustershop77 range that may be of interest to you:

Briefly what this article is about:

How to find the vin number for Renault Duster and decrypt it

Anything to add?

If you have anything to add to the article, or would like to share your experience on this topic, please leave a comment. If you are the author of a report on the repair or modification of a Renault car, or recommend material for placement in the Knowledge Bank, please let us know by e-mail

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]