Body dimensions of Lada Largus, Kalina, Granta and Priora: what geometry means and how linear and control dimensions are taken


Figure 11.1. Body parts: 1 – radiator frame; 2 – upper cross member of the front end; 3 – right front wing; 4 – front panel; 5 – hood; 6 – right front door; 7 – wind window pillar; 8 – interior panel of the front door; 9 – right rear door; 10 – inner panel of the rear door; 11 – right side; 12 – roof panel; 13 – left side; 14 – rear suspension spring support; 15 – trunk lid; 16 – inner panel of the trunk lid; 17 – side window frame; 18 – rear pillar; 19 – left rear door; 20 – rear wheel arch; 21 – middle floor panel; 22 – spare wheel niche; 23 – central pillar; 24 – left front door; 25 – front pillar; 26 – front floor panel; 27 – left front fender; 28 – front suspension spring support; 29 – bracket; 30 – front spar; 31 – towing eye bracket; 32 – front panel
The body of the VAZ-2170 Lada Priora car is a four-door sedan type, with a supporting structure, consisting of a frame and hinged units (Figure 11.1).
The body frame includes the base, sides, roof and frame parts, connected by electric welding (spot, seam, arc), and is a non-separable structure that has sufficient rigidity and is capable of carrying all the components of the car, mounted body components, components and interior parts, etc. .d.
Attachable components include side doors, hood, trunk lid, front fenders, and bumpers. The doors, hood and trunk lid are attached to the body with hinges, the front fenders are bolted.
The front and rear bumpers are plastic, painted in body color, attached with self-tapping screws. The front bumper is equipped with an energy-absorbing beam. The radiator trim is non-removable and is part of the bumper.
To improve anti-corrosion properties, most of the body panels are galvanized. On the inside, the front and middle floor panels, body sides, wind window pillar amplifiers are galvanized, on the outside - trunk lid and door panels, front and rear fenders, as well as many other parts (more than 30).
The windshield is three-layer, triplex type. Door glass, side and rear glass are tempered. The windshield, rear (with heating element) and side windows are glued to the body and are part of its power circuit.
The front seats are separate, with backrest tilt adjustment and longitudinal movement mechanisms, with easily removable headrests, adjustable in height. The back of the front seats can be adjusted to a comfortable position for relaxation.
The rear seat of a car with a one-piece cushion and backrest, divided into two parts by a folding armrest. Behind the armrest there is a hatch that can be closed with a lid, after removing which it becomes possible to transport long items in the trunk, partially letting them into the cabin.
The front and rear side seat belts are inertial, and the rear middle passenger lap belt is non-inertial. To increase passive safety, the car is equipped with an airbag for the driver. In a variant version, the car is additionally equipped with a front passenger airbag and front seat belt pretensioners, which are activated at the time of an accident at significant vehicle speeds.
The car interior is equipped with a cigarette lighter, front and rear ashtrays, sun visors, a heater, rear-view mirrors, and handrails. There is a mount for a fire extinguisher under the driver's seat, and a first aid kit under the passenger's seat. The car is equipped with front and rear towing eyes, electric door locks, electric trunk lock, and electrically heated front seats.

Signs of violation of factory geometry

  • Vibrations appear, accompanied by atypical extraneous noise.
  • The overall controllability of the car decreases: when moving, it is “pulled” to the side, making maneuvers difficult.
  • The car loses stability when driving, especially at high speeds.
  • The suspension, as well as the entire chassis of the car, often begin to fail.
  • Tires wear out quickly and unevenly.
  • Fuel consumption increases.
  • It is impossible to adjust the wheel alignment correctly.

The presence of such symptoms indicates that urgent restoration of the geometry of the car body is necessary.

Body repair Lada Largus. Geometric dimensions of the Lada Largus body

Openingsfront side doors
SymbolName0 holes, mm
,Ah, aJoint between A-pillar and roof panel
in,bJoint between A-pillar and hood panel
With, withFront side door hinge nut8
D, dFront side door hinge nut8
HerAssembly mark of the front pillar,
F, fA-pillar assembly mark
G, gDoor threshold assembly mark
H, hDoor threshold assembly mark
L iRoof panel assembly mark
■J. j B-pillar assembly mark
K, kB-pillar assembly mark
UIRear side door hinge mounting hole13
M,mRear side door hinge mounting hole13
SymbolsDistance, mmSymbolDistance, im
Ee1,172E-f or e-F1,487
Ff1,406E - h or e - N1,555
Gg-1,444E-j or e-J1,337
Hh1,444Fj^nf-J1,740
1-i1,062;F-kilig-K1,648
JJ1,266H-i or h -11,594
Kk1,426—J-knnnj-K"1,442

xn--44-6kchdmw3bgiawoo4b.xn--p1ai

Body geometry VAZ 2112 slip dimensions

To independently solve the problem of restoring parts of a VAZ 2112 car, you need to have the geometric dimensions of its body. In professional workshops, these parameters must be taken into account, and they are individual for each machine model. Violation of body geometry must be eliminated, since it significantly reduces the safety of driving such a car. From this article you can learn important information about the indicators on which high-quality repair of the VAZ 2112 body depends.

The influence of body geometry on handling

During the operation of a VAZ 2112 car, sooner or later deformation of body parts occurs. Safety on the road and ease of operation depend on the level of their wear.

VAZ 2112 has been produced since 1999. The car body of this model is similar to the 2110 modification, the difference is that the first is slightly shorter than the second.

The steering wheel makes turns easier and faster.

Model 2112 is characterized by a sporty character. It combines the winning parts of the 10 with the estate rear seat from the 2111, making the car much roomier and more maneuverable. The ability to transform the rear seat allows, if necessary, to significantly increase the volume of the interior. Improved handling characteristics have simplified the process of entering a turn, which has significantly increased the level of safety for road users.

The VAZ 2112 has several modifications, for example, model 21123 is characterized by an original design of the hood and bumper, which allowed the car body to become popular among many car enthusiasts. After some time, the VAZ 2112 had a new grille model, and the hood took on a standard look.

Geometric dimensions of the “two-piece”

VAZ 2112 is one of the most popular models among the cars produced by the domestic automotive industry. It is relatively inexpensive, has a good design and different body styles.

The main geometric dimensions of the body of this car are as follows (in mm):

  • length – 4170;
  • width without mirrors – 1680;
  • height – 1435;
  • width with mirrors – 1875;
  • rear door opening diagonal – 1320;
  • short diagonal of the rear side window frame – 230;
  • the distance between the center of the upper beam of the rear door opening to the middle of its lower beam is 1050;
  • the long diagonal of the rear side window frame is 710.

The rarest body type of the 2112 is a coupe, or three-door hatchback. This is a sports model, it stands out from others, which are monotonous in terms of the geometric dimensions of the body. It was the design features of the VAZ 2112 coupe that allowed the model to become in demand at one time. However, after ten thousand examples of the 2112 coupe were produced, production ceased, so it is considered a rare model.

Several modifications of the VAZ 2112 were equipped with hatches, which greatly increased the comfort of the driver and passengers on the road. The geometric dimensions of 2112 made it possible to equip the car with many additional functional capabilities.

Body parts most susceptible to deformation

Sharp braking or untimely start provoke, first of all, damage to the bumper. If it is insignificant, then during repairs it is possible to achieve the performance of standard geometry. In the presence of complex deformations, this cannot be done, so it is easier to replace the damaged body part with a new one.

If the owner of the car does not take enough care of the condition of the body, then those parts that have close contact with the road surface are quickly eaten away by corrosion. And repairing the hood, doors and hidden body parts instead of timely prevention is already more difficult and expensive.

The question arose about replacing the TV (s/o) with a VAZ-2110, as there was great sadness. Like everyone else, in order to save money, as well as gain experience, it was decided to do it yourself. The question arose about the geometric dimensions of the engine compartment. I found a couple of diagrams on the Internet

Comments 18

I also need sizes to check, so which ones to use!

I made it approximately according to my measurements

You probably haven’t been here for a long time) I’ve already done and sold the car! I won’t edit the blog anyway!

Yes, I already made mine too. But this recording will still be useful to someone

Wow, I should try to measure it)

Didn't take any measurements? Otherwise, in just a week I’ll go on vacation, and I’ll start doing shamanism a little

Not yet, I won’t get around to it, but I’ll definitely write back if I intend to)

I would be very grateful

Priora seat reupholstery

The upholstery in your car will tighten over time, even if you use cleaning products. The door panels, headliner and seat upholstery are combed out, become tarnished, greasy and simply have holes in them or are simply burned with a cigarette. Therefore, often dry cleaning is also powerless.

And here we are faced with a choice. Either install covers or replace the upholstery. Each of these options has its pros and cons.

In this case, such a problem concerns the Lada Priora car. If you like to take care of your car, then this instruction will be useful for car owners. Since it will be clearly shown how to reupholster the old rear seat with new upholstery. The instructions will have the most detailed explanation of how to disassemble and reassemble, as well as what you need to pay attention to and where to start when replacing the seat upholstery with your own hands.

The easiest way to update a seat is to cover it with new covers. But this will not solve the issue of cleanliness, because all the dirt that the upholstery has absorbed remains there, so the dust and unpleasant smell will not go away. The main advantage is how well they fit and perfectly follow all the curves of the foam casting. Covers will hide dirty upholstery, but with new upholstery you'll feel like you're in a new car.

Types of luggage racks

Since three bodies of the Lada Kalina have standard holes for attaching luggage accessories, this means that we can safely distinguish two designs:

  • Railings with add-on crossbars and accessories;
  • Cross members to factory installation locations.

Well, of course, there are also drivers who only have a universal trunk with a door arch mount. But they haven’t heard about the other models. This is a phenomenon of the owner of Lada Kalina. This means that a universal trunk for them exists and is called third on the list. But they need to keep in mind that the collapsible version of the universal luggage rack is equipped with a trapezoidal platform equidistant from the center of the support. Over-tightening the support bracket will result in strong pressure from the platform on the body. Since the Lada Kalina has a weak corner profile, a dent is possible. Trying to understand the issue is a bit like intimidation. But that's not true.

To date, AvtoVAZ has produced three different bodies:

  1. Sedan.
  2. Hatchback.
  3. Station wagon.

The station wagon has an elongated flat roof, while the sedan and hatchback have a different length and radius. If we correlate the information with the roof rails, then the body type assumes a specific model of the arch. It won’t fit from a station wagon to a sedan, just like from a hatchback to a station wagon. The issue of crossbars is more acute. After all, there are three ways at once:

  1. A simple stand in standard places. This is a tire made of one three-millimeter steel sheet with two holes for bolts, bent to fit the corner of the roof. At the end there is supposed to be a square hole for a square cross member, and it is known to have poor aerodynamics and whistle at speed.
  2. Universal non-removable mount. Most have a short catch angle and a thrust pad standing almost next to the center of pressure. Everything would be fine, but then why would there be “original” mounting holes?
      The universal dismountable mount is mentioned above. Its platform puts too much pressure on the roof.
  3. The third option is when the car is equipped with roof rails.
    All that remains is to find the cross members with transitional fasteners for the roof rails. Station wagon Lada Kalina with roof rails

It’s worth resorting to statistics:

  • On average, a sedan is equipped with cross members on standard or universal racks. Car enthusiasts are not afraid of noise at speed and dented roofs.
  • The hatchback design has better roof rails. If a factory option is not declared, then car enthusiasts search and find a model. Then cross members with adapters are made. By the way, aerodynamic wing-shaped cross members will reduce air resistance from the double structure (rails plus cross members).
  • That's why the station wagon is named that way. It is equipped with rails, standard and universal accessories.


Cross members on the roof of a Lada Kalina station wagon.
The owners, in their desire to help the AvtoVAZ concern, are groping for the right path, and the manufacturer reciprocates. We are talking about an optimal trunk with pre-installation of roof rails in their standard places. It is not for nothing that a set of longitudinal bars, if necessary, is ordered immediately from the factory. Some lucky motorists guess, buy roof rails, and then equip them with crossbars and accessories. They look more beautiful. But there are common excuses for those who do not agree with this state of affairs:

  • The car is getting taller.
  • The noise is louder.
  • Aerodynamics suffer.
  • The roof with roof rails is difficult to clean.
  • The paintwork is destroyed.
  • Expensive.
    Roof rack with crossbars and mounts for transporting skis on the roof of Lada Kalina

Therefore, reasonable arguments are given:

  • One and a half meters plus 15 centimeters is 165 cm. The average height of a person is 175-180 cm. This is not high.
  • Wing-shaped cross members reduce noise.
  • Any equipment for railings can be quickly removed. Cross members too. Aerodynamics will return to their original values. And the roof rails themselves are already being developed to be aerodynamic.
  • The roof with roof rails can be washed easily both in a car wash and by hand.
  • The armored film will protect the paintwork.
  • Rails allow you to change luggage racks depending on the purpose. Adjusting the distance between the crossbars allows the driver to correctly position the load.

Lada Priora hatchback: technical characteristics and features of the model

Before purchasing any car, the future owner carefully studies the main characteristics. The selection of a vehicle is primarily based on its power, efficiency, and safety.

Data on new modifications of familiar models is very important. For example, for a Lada Priora hatchback, the technical characteristics will indicate the updates received, modifications to the car and advantages over analogues in a different body.

Dimensions and dynamic data of Priora hatchback

The solid hatchback has small but sufficient dimensions: length - 4.21 m, width - 1.68 m, height - 1.43 m. The internal space was reduced due to the small external dimensions, but had minimal impact on the comfort of travel for second-row passengers.

The technical characteristics of the Priora hatchback also had a slight impact on the trunk volume. In the sedan, the luggage compartment volume is 430 liters, and in the hatchback it is 360 liters.

The model is equipped with 1.6 liter petrol engines. The power plant is combined with manual or 5-speed automatic transmissions. Engine power is 87, 98 and 106 hp, the maximum possible speed is 176 (183) km/h. The technical characteristics of the hatchback indicated for the Lada Priora lead to the following fuel consumption in mixed mode: from 6.6 to 7.3 liters. The maximum figure applies to a model with an automatic transmission.

Features of operation of Priora hatchback

It is important to further study the internal features of the model before purchasing a car. For example, the Lada Priora hatchback technical characteristics, which are quite good, have a high-quality immobilizer and trip computer

The model is equipped with electric power steering, electric windows, and heated exterior mirrors. No less important car settings include:

1. Precise steering wheel height adjustment.

2. The presence of a front airbag and emergency braking system.

3. Modern climate control and audio system.

4. Headlight range control and daytime running lights.

5. Alarm and central locking.

6. High-quality seat covering with automotive fabric.

The given technical characteristics of the Lada Priora hatchback and additions refer to the “norm” configuration. The base build lacks many of these comfort and safety features.

The cost of both modifications is almost the same, so with a small additional payment you can get a high-quality and reliable car. Subsequent modifications to the base car may take too much time, although the final price will not differ.

Particularly important for domestic cars are low consumption and cheap maintenance. The technical characteristics of the modern VAZ Priora hatchback model ensure minimal costs for vehicle diagnostics and repairs: maintaining the car in full working order is not difficult.

If necessary, the interior and exterior can be modified depending on the purpose of use. In its normal form, it can be used for family trips, daily commutes to work, and safe travel.

priorapro.ru

Standard gas tank - article number and price

The standard gas tank has article number 21082110101370. The price ranges from 3,500 to 5,500 rubles. All of them are produced at the same factory, the issue of pricing lies with the conscience of the seller. A used gas tank costs from 1000 to 2000 rubles. No need to be cheap - a gas tank is not just a plastic container, it should not be damaged. The quality of a gas tank used by someone can be doubted.

The dimensions and size of the tank on the Priora are such that the tank will fit in its predecessor models: the volume of the tank has not changed. A full tank always fills up to 43 liters.

Features of the bodies of “Ladovo” models

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more". Since we started with QOL, let’s continue this topic

For the frame of Ladovsky models without glued glass, the quality of life is 14 thousand N*m/degree, which is a very good mark. And with glass this figure is even higher

Since we started with QOL, let’s continue this topic. For the frame of Ladovsky models without glued glass, the quality of life is 14 thousand N*m/degree, which is a very good mark. And with glass this figure is even higher.

The testing of the Lada body in the rear turned out to be especially good. Thus, in the rear door opening, after a tough diagonal pressure test, the changes were recorded as only 1.5 mm, whereas on most foreign cars the same figure was 5-6 mm.

The body design of the Lada Largus and other similar models fundamentally complies with current European standards in terms of protecting passengers and the driver. The front subframe on Ladovsky models is one of the most important body elements responsible for this indicator. It is even considered an auxiliary spar, significantly increasing the strength of the body, as well as absorbing impact force.

The high quality of life of the Ladovsky body also has a beneficial effect on obtaining high-quality sound comfort in a car showroom. The frame does not twist over bumps and bumps, no deformations or anomalies occur between the interior and body elements, which ultimately has a positive effect on the absence of squeaks.

A lot of original parts, interchangeability of interior elements between Ladovsky models, enlargement of some parts of the body - all this was only a plus. In particular, the increase in some body elements led to a decrease in their number, which reduced production time and had a positive effect on performance.

Lada Largus

Called a budget station wagon with increased cross-country ability. The body was assembled based on Dasia/Renault Logan. The car was initially adapted for the market of Eastern European countries.

Even in the basic version of Logan, engineers took effective measures to enhance anti-corrosion protection, using protective inserts for the wheel arches. In addition, anti-corrosion and anti-gravity protection is installed over larger areas than before (at Samarov’s vehicles), with a thicker layer of mastic.

Here are some more innovations:

  • The engine compartment is well protected. Additional protection was used correctly;
  • The front suspension reinforcement has been increased. This was achieved through the use of leverage;
  • The washer reservoir has become larger and holds more fluid;
  • The wheels received protective aprons;
  • The change got a torpedo;
  • The bumper and radiator grille have been modernized.

How far can you travel?

The volume of the Priora's fuel tank is designed so that the car can travel a certain distance without refueling. In many ways, the power reserve is individual – that is, it depends on the driver’s driving style. Sharp acceleration increases fuel consumption, and the same thing happens if you select the wrong gear. But there is not only a human factor. Firstly, different amounts of fuel are consumed in the city, on the highway and in the combined cycle when recalculated per 100 km.

Secondly, a lot depends on the engine: the Priora was equipped with engines with a displacement of 1.6 liters with eight and sixteen valves and a power of 81, 87, 98 and 106 hp. Plus, since 2013, after restyling, the Priora was equipped with a robotic automatic transmission. The most popular choice is a sixteen-valve engine with 98 hp. along with manual transmission. Calculations will be given for it.

On a full tank

So, the configuration we have chosen consumes:

With the maximum filling of the gas tank, the Lada Priora, powered by AI-95 (according to the passport!) will travel:

It is worth subtracting at least 30 km from these figures so as not to kill the fuel pump - if it pumps air and debris from the bottom of the gas tank, its service life will gradually come to an end.

When the gas pump on the dashboard came on

If the gas station icon lights up on the panel, then this is not good - there is less than 10 liters left in the gas tank. This is, one might say, a critical situation. Of course, there have been cases when a person drove with a “light bulb” another 90 km along the highway, but it is better not to risk it - limit the radius of the gas station search area to 20 km immediately after you see the light bulb.

How body geometry is corrected

Repairing the body of a VAZ 2115 is a rather complex process that should be performed exclusively by professionals and in specialized centers:

  1. And before starting repair operations, the technical center personnel will have to inspect the car. It is carried out in order to identify all defects and draw up a further action plan. Technology can also take part in the diagnosis;
  2. Next, tin work will be carried out. Their goal is to dismantle all body elements that will not be involved in repairs;
  3. Next comes the time of tin work. At this stage, the body parts will undergo straightening, after which various major defects will be removed;
  4. The next step is to level the surface of the car body. This operation is carried out using putty. After its layer hardens, it will be polished;
  5. Then the vehicle will be prepared for painting;
  6. Then the painting itself will be done;
  7. After the paint has dried, an additional layer of varnish will be applied on top, which will be polished after it has hardened.

The VAZ-2115 body has replaced the 21099 body, quite popular among Russian consumers, but seriously outdated. The general features of the predecessor can be easily seen in the newer model.

Major breakdowns and malfunctions

There are several main reasons for tank breakdowns after which it needs to be repaired or replaced with a new one.

The studs securing the fuel pump cup are one of the main reasons for tank failure and the reason for its repair. Although the diameter of the studs was increased in Priora, it is not difficult to tear them off.

A tank breakdown occurs when driving on country roads, since the tank does not have any protection and is located in a vulnerable place.

Corrosion in the tank is also one of the reasons for dismantling the tank and cleaning it from dirt or even replacing it with a new one.

Let's look at what the design of a bearing puller is

A bearing puller is a device, usually made of steel, consisting of several claws and a metal rod. This type of tool is used to firmly grip the bearing in order to remove it. The bearing removal process occurs due to tightening force. The ease of operation of the puller and the absence of the risk of injury depend on the quality of the design.

Types of mechanical pullers:

  1. Pullers with two gripping arms.
  2. Pullers with three gripping arms.
  3. Internal pullers.

Pullers with two gripping arms are a fairly simple and reliable mechanism. Made from high strength steel alloys. Allows you to easily control the work process.

Pullers with three claws are the same pullers with two claws, but improved. As a rule, they are made of hard alloy tool steel.

Internal pullers are used to remove coupling shafts when the part is firmly attached to the structure.

There is also another unofficial type of puller - this is a special one. As a rule, it is used to remove generators, cylinders, and motors. These pullers are exclusive, made to your specific dimensions. This is the main advantage of such a product; you can be sure that the puller one hundred percent fulfills its promises.

Today we will look at how to make a reliable and, most importantly, simple puller that will help you out in difficult times. For this we need:

  • A piece of thick pipe.
  • Steel plate.
  • Nut, bolt.
  • Dye.
  • Kernel.
  • Welding machine.
  • Bulgarian.
  • Drill.
  • Lathe.
  • Sanding disc.

Body of Lada Largus / Lada Largus

Body parts: 1 – left luggage compartment door; 2 – right luggage compartment door; 3 – rear bumper; 4 – right side window of the rear compartment; 5 – right rear door; 6 – front door right; 7 – hood; 8 – outside rear view mirror; 9 – right front wing; 10 – front bumper

The Lada Largus body is a one-piece welded structure. It is welded on a robotic line. All body parts that are prone to corrosion are galvanized. The main method of connecting body parts to each other is resistance welding, and electric welding is used in hard-to-reach places. All welds and joints of parts are coated with mastic. When making a body, after connecting its main parts, it is immersed in a special bath with an anti-corrosion compound. Then the primer and paint coating are applied. Hidden cavities are treated with a wax auto-preservative, and the bottom is covered with anti-corrosion mastic.

The body is designed taking into account the most advanced requirements for passive vehicle safety. One of the most important elements of passive safety is the front subframe, which has the property of redistributing impact energy. Car bumpers are made of impact-resistant material that absorbs impact energy. The car doors have metal stamped reinforcements in case of a side impact.

Due to the fact that the body has a very rigid structure, and the plastic interior parts have a gap between each other and are secured with special fasteners, there is virtually no vibration noise in the cabin (the so-called “crickets”).

The LADA Largus windshield is three-layer, it is glued into the body frame and is part of its load-bearing structure. All other car windows are tempered. The side door windows are sliding and, depending on the configuration, have either a manual or electric drive.

The side windows of the rear compartment can be opened slightly (7-seater version).

The luggage compartment doors can be opened completely, or up to two fixed positions provided for this, which is very convenient if the car is in a cramped loading/unloading space.

A modification of the car called LADA Largus Cross has unpainted black front and rear bumpers, as well as protective covers on the wheel arches and sills made of black plastic.

About choosing paint to match the body color

Theoretically, the paint can be selected according to the code that is indicated on the nameplate on the car or is stamped by the VIN code. However, very often the resulting color differs significantly from the body color. This is due to two factors: production features and the abundance of color matching systems (programs). The problem is that there is no uniform production of paint of certain shades. At automobile factories, the desired tone is obtained according to a certain recipe: a package of pigments is added to a barrel with the main color. For each batch of machines a new batch is made. And just as parts can differ from each other by a tolerance, so paints also vary slightly in shade.

At a car plant, you won’t find two barrels with a 100% color match—even cars from neighboring batches have different colors. Factory-prepared paint is not supplied to the secondary market, and during body repairs at any service center you have to select the tone. There are color matching systems for this.

largus-mcv.ru

Options and prices | Auto is the official dealer of LADA in Khmelnitsky

Engine1.6 l. 16 classes (Euro-3)
ExecutionNormNormNormLux
Body type (number of doors)station wagon (5)
Dimensions and weight:
length4340
width1680
height1508
Luggage compartment volume in passenger/cargo versions, l444/777
Weight in running order, kg.1088
Gross vehicle weight, kg1593
Weight of towed trailer, kg:
with brakes800
no brakes500
Fuel tank capacity, l43
Engine:
TypeGasoline, four-cylinder, four-stroke
Fuel systemdistributed fuel injection with electronic control
Cylinder displacement, cm3; number of valves 1596; 16 classes
Maximum power, hp/kW (at rpm), ISO98 / 72,0 ( 5600 )
Maximum torque, Nm (at rpm)145,0 (4000+/-300)
Maximum speed, km/h183
Acceleration time to 100 km/h, s11,5
Fuel consumption by driving cycle, l/100 km7,2
Fuelgasoline, octane number not less than 95
Safety
Anti-lock brake system (ABS)++
Side door safety bars++++
Electric headlight corrector++++
Driver airbag++++
Front passenger airbag+
Three-point retractable seat belts++++
Adjusting the height of the front seat belts++++
Front seat belt pretensioner+
Driver seat belt indication+
Anti-theft systems
Immobilizer++++
Anti-theft alarm with remote control++++
Electronic throttle actuator (E-gas)++++
Comfort
Audio system (FM+CD+MP3+USB+Bluetooth), 4 speakers+
Climate system+++
Tilt-adjustable steering column++++
Electric power steering++++
Remote control for raising windows when doors are locked++++
Central locking with remote control++++
Single key for ignition and door locks++++
Control of the trunk lid lock (tailgate) remotely and with a button from the passenger compartment++++
Alarm for open hood and trunk lid++++
Automatic headlight switching system (“light sensor”)+
Safe car parking system+
Windshield wiper control system with rain sensor+
Electric drive and heated exterior mirrors++++
Power windows for front doors++++
Power windows for rear doors+
Heated front seats+
Rear seat headrests++++
Athermal glasses++++
Container for glasses++++
Interior lamps with individual lighting+
Front door entry/exit lighting+
Passenger sun visor mirror+
Interior
AudioAudio preparationFM/CD/MP3(4 speakers)
Rear seat with center armrest and luggage compartment access++++
Instrument cluster with on-board computer functions (electronic clock and outside temperature display)++++
Adjusting the brightness level of the illumination of controls (ignition switch, instruments)++++
Upholstery material velor+++
Upholstery material: velvet+
Armrest between the front seats with storage for small items++++
Split rear seat++++
Rails (roof cradle)++++
Interior, trunk and glove box lighting+
Exterior
Body paint in metallic color++++
Exterior mirrors with turn signals, painted in body color+
Bumpers painted in body color++++
Door handles painted in body color+
Floor sill fairings++++
Alloy wheel rims R14”++++
Full size spare tire++++

How to check the geometry of a car body

The opinion that the absence of deviations in the car's wheel alignment indicators can serve as confirmation of the correct body geometry is erroneous. Body diagnostics is a separate procedure that requires special stands and stocks.

Using such devices, using control points, you can check the conformity of the dimensions and diagonals of the engine compartment, trunk, doorways, as well as the distance between side members, reinforcements, load-bearing body parts, etc.

There are three options for checking body geometry:

  • Carrying out measurements of distances between control points. This type of diagnostic allows you to quickly check the correctness of the geometry both before starting repair work and during its implementation. Such measurements are carried out using a regular tape measure or a special ruler.
  • During comparative measurements, the correspondence of the distances between symmetrical points located on opposite sides of the body is analyzed. This type of test is distinguished by its versatility and ease of diagnosis of body damage. As a rule, experts compare the length of the diagonals between symmetrical points of the body. In this case, you can compare the measurement data on the damaged and intact sides of the car.
  • In three-dimensional measurement, the spatial location of control points is determined in relation to the base planes of the body. For such diagnostics it is necessary to have special equipment.

During the measurements, a specialist can determine the extent of the main damage, determine the presence of minor defects and outline a plan for restoration work.

To measure the geometry of the body, measuring rulers are used or stationary equipment is used, a slipway, which allows you to check the distances between control points using special marks or electronic beacons.

To do this, the car is fixed on a platform using chains and measuring sensors are hung on certain points of the body. Quite often, craftsmen are faced with a situation where control points are hidden under the skin of body panels, under bumpers, under protective elements, so they have to partially disassemble the body to provide access to hidden places.

In order to restore the original parameters of the body geometry, straightening work is carried out in a car service center. This is a rather complex and multi-stage job that must be performed by qualified craftsmen who have the appropriate education, experience and a good feel for metal.

Garage specialists can tell you that they can easily restore your car after an accident using a special certified line. But such assurances should not be trusted. Without equipment such as a slipway, the geometry of the body after a serious accident cannot be fully restored. Cars repaired in artisanal conditions, as a rule, have deviations in body geometry.

We have already noted earlier that body diagnostics using control points should be carried out at least once a year or every 30 thousand km. mileage

If the car service is not equipped with special stands, then a body repair technician can use a ruler to measure the geometry of the body, but this is not a very reliable method, which can give an error of about 5 millimeters in one direction or another.

On the slipway you can measure the dimensions of such body elements as:

  • luggage compartment opening;
  • engine compartment;
  • front and rear side members;
  • window openings;
  • doorways;
  • sections of the front, middle, rear of the car.

To straighten the car frame, auto repair shops use hydraulic equipment and vacuum suction cups.

Complete restoration of body geometry (correction after serious accidents) can be carried out by stretching, but only if the metal has retained its characteristics.

Diode pointers are used for computer body diagnostics. This device allows you to perform all the necessary measurements without disassembling. For diagnostics, the machine is installed on a stand. The computer program will take all the necessary measurements and apply them to a virtual template of a specific car model. Such a check takes about 10 minutes, and the owner of the car receives a printout of the body with marked problem areas. The permissible error of such diagnostics is within 5 mm.

How to reupholster the rear and front seats of Priora

The first thing you need to do is disassemble the back row, then put it in a place convenient for you, maybe right in the middle of the room. The whole procedure consists of straightening the metal rings, rearranging the knitting needles and stretching the new upholstery using not rings, but ties.

    The old upholstery is attached to the body using steel rings; we unbend them. If you try to snack on them, it will be a rather labor-intensive task. Therefore, simply use side cutters to twist the ring clockwise, and it will come off. If that doesn't work, use pliers.
Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]